Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Direct detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Long-term ultrasonic monitoring of concrete affected by alkali-silica reaction

This article presents continuous monitoring results of alkali-silica reaction (ASR) development in concrete specimens for over 400 days using ultrasonic testing and expansion measurements. Eight concrete specimens with nonreactive aggregate (Control), reactive coarse aggregate, and reactive fine aggregates were cast with two reinforced confinement conditions. The specimens were conditioned in an environmental chamber with high temperature and humidity (38°C and 90% relative humidity) to accelerate the ASR development. A multichannel ultrasonic monitoring system was developed to collect ultrasonic signals automatically, and the expansions in three directions were measured periodically. Results showed that the relative velocity change could detect the ASR initiation in all reactive specimens and show a correlation with expansion in the early stage. However, these correlations are inconsistent for different ASR specimens, and the velocity change becomes less sensitive to ASR damage in the late stage (after 300 days). Irrecoverable velocity drop was observed during every chamber shutdown period, especially in specimens with higher levels of ASR damage. This phenomenon suggests that the nonlinear ultrasonic response caused by the ambient temperature variation may indicate the ASR damage.

Engineering↗
DOE OSTI2023

Disentangling the Hadronic Components in NGC 1068

The recent detection of high-energy neutrinos by IceCube in the direction of the nearby Seyfert/starburst galaxy NGC 1068 implies that radio-quiet active galactic nuclei can accelerate cosmic-ray ions. Dedicated multimessenger analyses suggest that the interaction of these high-energy ions with ambient gas or photons happens in a region of the galaxy that is highly opaque for GeV–TeV gamma rays. Otherwise, the GeV–TeV emission would violate existing constraints provided by the Fermi Large Area Telescope (LAT) and the Major Atmospheric Gamma Imaging Cherenkov. The conditions of high optical depth are realized near the central supermassive black hole (SMBH). At the same time, the GeV emission detected by the Fermi LAT is likely related to the galaxy’s sustained star formation activity. In this work, we derive a 20 MeV–1 TeV spectrum of NGC 1068 using 14 yr of Fermi LAT observations. We find that the starburst hadronic component is responsible for NGC 1068's emission above ~500 MeV. However, below this energy, an additional component is required. In the 20–500 MeV range, the Fermi LAT data are consistent with hadronic emission initiated by non-thermal ions interacting with gas or photons in the vicinity of the central SMBH. This highlights the importance of the MeV band to discover hidden cosmic-ray accelerators.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Heartbeat: Detecting Malware by Periodic Power Signal Injection and Monitoring

Rootkits and other stealthy malware attempt to conceal their presence on a computer by making changes to the host computer’s operating environment. ORNL’s Heartbeat technology detects these changes, and thus the malware itself. Heartbeat operates by directly monitoring the DC power consumption of the computer while a set of operations, the “heartbeat,” is executed periodically. These operations exercise parts of the operating system that are common targets of malware tampering. The power consumption during these heartbeat events is monitored and then compared to a previously learned baseline, with any significant deviation detected and analyzed. This technology has been tested and validated in a laboratory environment, and ORNL is currently seeking a deployment partner to allow for further in-context development and testing of this technology.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Characterizing the Experiment for Calibration with Uranium (Excalibur) neutron source for use in warhead verification

Neutron sources can play a variety of roles in warhead verification. For transmission radiography, a source of directed high energy neutrons is required, while for applications to detect fissile isotopes, sub-MeV neutrons are preferred. The Excalibur (Experiment for Calibration with Uranium) neutron source has been built and used in a variety of verification-related experiments. Excalibur is based on a commercial deuterium-tritium neutron generator specified and measured to be capable of producing 14 MeV neutrons at rates of up to 8.2 × 10 8 neutrons/s. Here, the generator is enclosed in a carbon-steel 32" diameter, 23.62" high carbon-steel cylinder that moderates the mean neutron energy to under 500 keV. This, in turn, is encased in 5%-borated polyethylene such that the entire assembly is a 48" x 48" box that is 30" tall. For radiographic applications, a narrow, tapered channel in the steel and polyethylene allows 14 MeV neutrons to stream directly from the generator to a test object. Its collimating capability is demonstrated by measuring the neutron flux profile. In the moderated mode of operation, the generator is fully enclosed in the steel, but a large section of the polyethylene is removed, providing a flux of sub-MeV neutrons from a wide range of angles. Neutron angular and spectral measurements using both a nested neutron spectrometer and a commercial liquid scintillator coupled with a 3 He detector show the expected softer neutron spectrum in moderated mode in good agreement with MCNP6 calculations. The gamma-ray spectrum from Excalibur is also in good agreement with MCNP modeling. Based on these findings, the future application of Excalibur in its two configurations is discussed.

Fissile material detection↗
DOE OSTI2021

Preventing Failures By Dataset Shift Detection in Safety-Critical Graph Applications

Dataset shift refers to the problem where the input data distribution may change over time (e.g., between training and test stages). Since this can be a critical bottleneck in several safety-critical applications such as healthcare, drug-discovery, etc., dataset shift detection has become an important research issue in machine learning. Though several existing efforts have focused on image/video data, applications with graph-structured data have not received sufficient attention. Therefore, in this paper, we investigate the problem of detecting shifts in graph structured data through the lens of statistical hypothesis testing. Specifically, we propose a practical two-sample test based approach for shift detection in large-scale graph structured data. Our approach is very flexible in that it is suitable for both undirected and directed graphs, and eliminates the need for equal sample sizes. Using empirical studies, we demonstrate the effectiveness of the proposed test in detecting dataset shifts. We also corroborate these findings using real-world datasets, characterized by directed graphs and a large number of nodes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Seismic monitoring and high-frequency noise using arrays in the Arabian Peninsula

Seismic arrays provide useful tools for regional seismic monitoring. Two small-aperture, regionally-oriented arrays, QWAR and HQAR, were deployed in Saudi Arabia and Oman in 2012 and 2016. We utilize a time-domain beampacking method, similar to frequency-wavenumber analysis, to examine the performance of the arrays in terms of slowness and azimuthal bias and event detection capabilities. Additionally, we investigate persistent ambient noise sources recorded by the arrays. We find that the arrays provide slowness vectors with biases comparable with similar-sized arrays of the International Monitoring System in other locations around the world. At QWAR, regional events of magnitude 3.0 and above are detected a majority of the time, and as magnitudes increase to 4.0 and above, the detection rate is greater than 82%. Finally, strong noise generation, primarily with slownesses characteristic of Lg waves, is found in the directions of the northern Arabian/Persian Gulf and southern Red Sea and may be a factor in event detection capabilities.

58 GEOSCIENCES↗
DOE OSTI2022

Hybrid data-driven and model-informed online tool wear detection in milling machines

Precision machining tool wear is responsible for low product throughput and quality. Monitoring the tool wear online is vital to prevent degradation in machining quality. However, direct real-time tool wear measurement is not practical. This paper presents residual-based anomaly detection models, combining a hybrid model comprised of a physics-based model and a data-driven model (a decision tree or a neural network) to predict signals of interest (e.g., power or forces) under nominal conditions, followed by Page’s cumulative sum test for detecting tool wear on-line using the computer numerical control machine measurements. The most informative features are ranked using dynamic programming and its approximation variants from real-time measurements and machine settings, such as the width of cut, depth of cut, feed rate and spindle speed, that serve as inputs to the predictive models. The baseline nominal model is incrementally updated with experimental data via a gradient boosted adaptation model to generate the residuals that account for discrepancies between the actual machine data under normal conditions and the baseline nominal model predictions. The hybrid model is validated against 20 Mazak milling machine experimental tests and one Haas run-to-failure experiment. The proposed anomaly detector is applied to synthetic data from simulations of the physics-based model at different operating conditions, measurement noise levels, and tool wear levels, and the methods were able to achieve an overall 92% accuracy in data with 1% noise. The anomaly detection methods based on hybrid model reduced the false alarms of either the data-driven or physical-based models alone, and are found to be capable of good online detection of tool wear.

42 ENGINEERING↗
DOE OSTI2020

Detection of uncompensated magnetization at the interface of an epitaxial antiferromagnetic insulator

We have probed directly the temperature and magnetic field dependence of pinned uncompensated magnetization at the interface of antiferromagnetic FeF 2 with Cu, using FeF 2 -Cu-Co spin valves. Electrons polarized by the Co layer are scattered by the pinned uncompensated moments at the FeF 2 -Cu interface giving rise to giant magnetoresistance. We determined the direction and magnitude of the pinned uncompensated magnetization at different magnetic fields and temperatures using the angular dependencies of resistance. The strong FeF 2 anisotropy pins the uncompensated magnetization along the easy axis independent of the cooling field orientation. Most interestingly, magnetic fields as high as 90 kOe cannot break the pinning at the FeF 2 -Cu interface. This proves that the pinned interfacial magnetization is strongly coupled to the antiferromagnetic order inside the bulk FeF 2 layer. Studies as a function of FeF2 crystalline orientation show that uncompensated spins are only detected in a spin valve with (110) crystal orientation, but not in valves containing FeF 2 (100) and FeF 2 (001). This observation is in agreement with symmetry-related considerations which predict the equilibrium boundary magnetization for the FeF 2 (110) layer.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Constraining and Characterizing the Size of Atmospheric Rivers: A Perspective Independent From the Detection Algorithm

Abstract Atmospheric rivers (AR) are large and narrow filaments of poleward horizontal water vapor transport. Because of its direct relationship with horizontal vapor transport, extreme precipitation, and overall AR impacts over land, the AR size is an important characteristic that needs to be better understood. Current AR detection and tracking algorithms have resulted in large uncertainty in estimating AR sizes, with areas varying over several orders of magnitude among different detection methods. We develop and implement five independent size estimation methods to characterize the size of ARs that make landfall over the west coast of North America in the 1980–2017 period and reduce the range of size estimation from ARTMIP. ARs that originate in the Northwest Pacific (WP) (100°−180°E) have larger sizes and are more zonally oriented than those from the Northeast Pacific (EP) (180°−240°E). ARs become smaller through their life cycle, mainly due to reductions in their width. They also become more meridionally oriented toward the end of their life cycle. Overall, the size estimation methods proposed in this study provide a range of AR areas (between 7 × 10 11 and 10 13 m 2 ), that is, several orders of magnitude narrower than current methods estimation. This methodology can provide statistical constraints in size and geometry for the AR detection and tracking algorithms, and an objective insight for future studies about AR size changes under different climate scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Enhanced cutoff energies for direct and rescattered strong-field photoelectron emission of plasmonic nanoparticles

Abstract The efficient generation, accurate detection, and detailed physical tracking of energetic electrons are of applied interest for high harmonics generation, electron-impact spectroscopy, and femtosecond time-resolved scanning tunneling microscopy. We here investigate the generation of photoelectrons (PEs) by exposing plasmonic nanostructures to intense laser pulses in the infrared (IR) spectral regime and analyze the sensitivity of PE spectra to competing elementary interactions for direct and rescattered photoemission pathways. Specifically, we measured and numerically simulated emitted PE momentum distributions from prototypical spherical gold nanoparticles (NPs) with diameters between 5 and 70 nm generated by short laser pulses with peak intensities of 8.0 × 10 12 and 1.2 × 10 13 W/cm 2 , demonstrating the shaping of PE spectra by the Coulomb repulsion between PEs, accumulating residual charges on the NP, and induced plasmonic electric fields. Compared to well-understood rescattering PE cutoff energies for strong-field photoemission from gaseous atomic targets (10× the ponderomotive energy), our measured and simulated PE spectra reveal a dramatic cutoff-energy increase of two orders of magnitude with a significantly higher contribution from direct photoemission. Our findings indicate that direct PEs reach up to 93 % of the rescattered electron cutoff energy, in contrast to 20 % for gaseous atoms, suggesting a novel scheme for the development of compact tunable tabletop electron sources.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Electrochemical Reactivity and Passivation of Silicon Thin-Film Electrodes in Organic Carbonate Electrolytes

This work focuses on the mechanisms of interfacial processes at the surface of amorphous silicon thin-film electrodes in organic carbonate electrolytes to unveil the origins of the inherent nonpassivating behavior of silicon anodes in Li-ion batteries. Attenuated total reflection Fourier-transform infrared spectroscopy, X-ray absorption spectroscopy, and infrared near-field scanning optical microscopy were used to investigate the formation, evolution, and chemical composition of the surface layer formed on Si upon cycling. Herein, we found that the chemical composition and thickness of the solid/electrolyte interphase (SEI) layer continuously change during the charging/discharging cycles. This SEI layer “breathing” effect is directly related to the formation of lithium ethylene dicarbonate (LiEDC) and LiPF6 salt decomposition products during silicon lithiation and their subsequent disappearance upon delithiation. Furthermore, the detected appearance and disappearance of LiEDC and LiPF6 decomposition compounds in the SEI layer are directly linked with the observed interfacial instability and poor passivating behavior of the silicon anode.

25 ENERGY STORAGE↗
DOE OSTI2025

PCM1 coordinates centrosome asymmetry with polarized endosome dynamics to regulate daughter cell fate

Vertebrate radial glia progenitors (RGPs) balance self-renewal and differentiation through asymmetric cell division (ACD), which involves unequal centrosome inheritance. How centrosome asymmetry directs cell fate remains poorly understood. Here, we identify Pericentriolar material 1 (Pcm1) as a key player in this process. In zebrafish embryonic RGPs, Pcm1 is asymmetrically associated with Cep83, a mother centrosome marker. Using in vivo time-lapse imaging and nanoscale-resolution expansion microscopy, we detect Pcm1 on Notch ligand-containing endosomes, where it interacts–either directly or indirectly–with Par-3 and dynein. Loss of pcm1 disrupts endosome dynamics, increasing neuronal differentiation at the expense of RGP self-renewal. Mechanistically, Pcm1 facilitates the transition from Rab5b to Rab11a and promotes the assembly of Par-3 and dynein macromolecular complexes on recycling endosomes. Furthermore, we find conserved PARD3-PCM1-CEP83-RAB11 associations in human cortical brain organoids. Our findings uncover that Pcm1 links centrosome asymmetry to polarized endosome trafficking, thereby regulating RGP fate decisions.

Cell fate and cell lineage↗
DOE OSTI2021

A Projected Network Model of Online Disinformation Cascades

Within the past half-decade, it has become overwhelmingly clear that suppressing the spread of deliberate false and misleading information is of the utmost importance for protecting democratic institutions. Disinformation has been found to come from both foreign and domestic actors, but the effects from either can be disastrous. From the simple encouragement of unwarranted distrust to conspiracy theories promoting violence, the results of disinformation have put the functionality of American democracy under direct threat. Present scientific challenges posed by this problem include detecting disinformation, quantifying its potential impact, and preventing its amplification. We present a model on which we can experiment with possible strategies toward the third challenge: the prevention of amplification. This is a social contagion network model, which is decomposed into layers to represent physical, ''offline'', interactions as well as virtual interactions on a social media platform. Along with the topological modifications to the standard contagion model, we use state-transition rules designed specifically for disinformation, and distinguish between contagious and non-contagious infected nodes. We use this framework to explore the effect of grassroots social movements on the size of disinformation cascades by simulating these cascades in scenarios where a proportion of the agents remove themselves from the social platform. We also test the efficacy of strategies that could be implemented at the administrative level by the online platform to minimize such spread. These top-down strategies include banning agents who disseminate false information, or providing corrective information to individuals exposed to false information to decrease their probability of believing it. We find an abrupt transition to smaller cascades when a critical number of random agents are removed from the platform, as well as steady decreases in the size of cascades with increasingly more convincing corrective information. Finally, we compare simulated cascades on this framework with real cascades of disinformation recorded on Whatsapp surrounding the 2019 Indian election. We find a set of hyperparameter values that produces a distribution of cascades matching the scaling exponent of the distribution of actual cascades recorded in the dataset. We acknowledge the available future directions for improving the performance of the framework and validation methods, as well as ways to extend the model to capture additional features of social contagion.

42 ENGINEERING↗
DOE OSTI2026

Horizontal transfer of chromosomal DNA mediated by an integrative and conjugative element generates frequent localized recombination in Novosphingobium aromaticivorans

Horizontal gene transfer is an important evolutionary process by which DNA is exchanged between cells that are physically co-located but not direct evolutionary descendants. Horizontal transfer of highly divergent DNA is relatively easy to detect and can produce major phenotypic changes, exemplified by the acquisition of antibiotic resistance determinants. However, transfer of high-identity DNA, for example, between strains of the same species, is likely to be more frequent, harder to detect, and highly impactful in aggregate. In this work, we demonstrate that soil isolates of the alphaproteobacterium Novosphingobium aromaticivorans can exchange chromosomal DNA, leading to multiple unselected recombination events spanning approximately 10% of the chromosome. Chromosomal recombination was directional and more efficient near an integrative and conjugative element (ICE), and required a relaxase found in the ICE. Recombination could not be observed in strains from closely related Novosphingobium species. In combination, these results suggest that ICE-mediated recombination can efficiently recombine DNA within N. aromaticivorans, increasing the adaptive potential of the species while also enforcing species boundaries through preferential intraspecific recombination.

Allemann, Marco [ORNL]↗
DOE OSTI2024

A new aerial approach for quantifying and attributing methane emissions: implementation and validation

Methane (CH 4 ) is a powerful greenhouse gas that is produced by a diverse set of natural and anthropogenic emission sources. Biogenic methane sources generally involve anaerobic decay processes such as those occurring in wetlands, melting permafrost, or the digestion of organic matter in the guts of ruminant animals. Thermogenic CH 4 sources originate from the breakdown of organic material at high temperatures and pressure within the Earth's crust, a process which also produces more complex trace hydrocarbons such as ethane (C 2 H 6 ). Here, we present the development and deployment of an uncrewed aerial system (UAS) that employs a fast (1 Hz) and sensitive (1–0.5 ppb s -1 ) CH 4 and C 2 H 6 sensor and ultrasonic anemometer. The UAS platform is a vertical-takeoff, hexarotor drone (DJI Matrice 600 Pro, M600P) capable of vertical profiling to 120 m altitude and plume sampling across scales up to 1 km. Simultaneous measurements of CH 4 and C 2 H 6 concentrations, vector winds, and positional data allow for source classification (biogenic versus thermogenic), differentiation, and emission rates without the need for modeling or a priori assumptions about winds, vertical mixing, or other environmental conditions. The system has been used for direct quantification of methane point sources, such as orphan wells, and distributed emitters, such as landfills and wastewater treatment facilities. With detectable source rates as low as 0.04 and up to ~1500 kg h -1 , this UAS offers a direct and repeatable method of horizontal and vertical profiling of emission plumes at scales that are complementary to regional aerial surveys and localized ground-based monitoring.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Characterization of just one atom using synchrotron X-rays

Since the discovery of X-rays by Roentgen in 1895, its use has been ubiquitous, from medical and environmental applications to materials sciences. X-ray characterization requires a large number of atoms and reducing the material quantity is a long-standing goal. Here we show that X-rays can be used to characterize the elemental and chemical state of just one atom. Using a specialized tip as a detector, X-ray-excited currents generated from an iron and a terbium atom coordinated to organic ligands are detected. The fingerprints of a single atom, the L 2,3 and M 4,5 absorption edge signals for iron and terbium, respectively, are clearly observed in the X-ray absorption spectra. The chemical states of these atoms are characterized by means of near-edge X-ray absorption signals, in which X-ray-excited resonance tunnelling (X-ERT) is dominant for the iron atom. The X-ray signal can be sensed only when the tip is located directly above the atom in extreme proximity, which confirms atomically localized detection in the tunnelling regime. Finally, our work connects synchrotron X-rays with a quantum tunnelling process and opens future X-rays experiments for simultaneous characterizations of elemental and chemical properties of materials at the ultimate single-atom limit.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Octofitter: Fast, Flexible, and Accurate Orbit Modeling to Detect Exoplanets

As next-generation imaging instruments and interferometers search for planets closer to their stars, they must contend with increasing orbital motion and longer integration times. These compounding effects make it difficult to detect faint planets but also present an opportunity. Increased orbital motion makes it possible to move the search for planets into the orbital domain, where direct images can be freely combined with the radial velocity and proper motion anomaly, even without a confirmed detection in any single epoch. In this paper, we present a fast and differentiable multimethod orbit-modeling and planet detection code called Octofitter. This code is designed to be highly modular and allows users to easily adjust priors, change parameterizations, and specify arbitrary function relations between the parameters of one or more planets. Octofitter further supplies tools for examining model outputs including prior and posterior predictive checks and simulation-based calibration. We demonstrate the capabilities of Octofitter on real and simulated data from different instruments and methods, including HD 91312, simulated JWST/NIRISS aperture masking interferometry observations, radial velocity curves, and grids of images from the Gemini Planet Imager. We show that Octofitter can reliably recover faint planets in long sequences of images with arbitrary orbital motion. This publicly available tool will enable the broad application of multiepoch and multimethod exoplanet detection, which could improve how future targeted ground- and space-based surveys are performed. Finally, its rapid convergence makes it a useful addition to the existing ecosystem of tools for modeling the orbits of directly imaged planets.

79 ASTRONOMY AND ASTROPHYSICS↗