Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data bias”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Comparison Study of Upper Subcritical Limits Derived Using Sensitivity/Uncertainty Tools: Case Studies of U233-SOL-THERM-001-001, MIX-COMP-THERM-001-001, IEU-MET-FAST-002-001, LEU-COMP-THERM-001-001, LEU-SOL-THERM-004-001

Neutron transport methods used to establish subcriticality require validation by comparison to critical experiments considered to be benchmarks. Whisper is a sensitivity/uncertainty analysis tool developed to assist with the task of validation in nuclear criticality safety. Details on the Whisper methodology can be found in References 1-3 on the MCNP® reference collection website at https://mcnp.lanl.gov. Whisper-1.0 was originally developed in 2014 and used to assist with nuclear criticality safety validation at Los Alamos National Laboratory. Whisper was upgraded in 2016 to Whisper-1.1 and prepared for release with MCNP6.2 [References 3-5]. Whisper contains a library of over 1100 critical experiment benchmarks and quantifies neutronic similarity of an application to benchmarks in the library. Using highest similarity benchmarks, Whisper computes a calculational margin (CM) encompassing of the worst-case bias and bias uncertainty at a 99% confidence level for each application. In addition, portions of the margin of subcriticality (MOS) for nuclear data uncertainty and potential code errors are computed. The baseline upper subcritical limit (USL) computed by Whisper is comprised of the CM, MOS nuclear data , and MOS code errors . The Whisper baseline USL is absent a portion of the MOS due to the area of application, which is applied based upon judgment by the criticality safety analyst. An objective of this paper is to present the baseline USL, CM and portions of the MOS as computed by Whisper for comparison with similar sensitivity/uncertainty tools, such as those used by IRSN and ORNL. An initial comparison involved four critical experiment benchmarks: HEU-MET-FAST-013-001, HEU-SOLTHERM-001-008, PU-MET-FAST-022-001, AND PU-SOL-THERM-001-001, which have been documented in References 10-13. This study extends the comparison to include cases U233-SOL-THERM-001-001, MIX-COMP-THERM-001-001, IEU-MET-FAST-002-001, LEU-COMP-THERM-001-001, LEU-SOL-THERM- 004-001.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The X-Ray Fundamental Plane of the Platinum Sample, the Kilonovae, and the SNe Ib/c Associated with GRBs

A large fraction of gamma-ray burst (GRB) lightcurves (LCs) show X-ray plateaus. We analyze all GRBs with known redshifts presenting plateaus observed by The Neil Gehrels Swift Observatory from its launch until 2019 August. The fundamental plane relation between the rest-frame time and X-ray luminosity at the end of the plateau emission and the peak prompt luminosity holds for all the GRB classes when selection biases and cosmological evolutions are applied. We have discovered two important findings: (1) a new class of long GRBs with good data coverage: the platinum sample; and (2) the platinum, the SNe-LGRB, and the KN-SGRB samples, yield the smallest intrinsic scatter with σ platinum , GRB-SNe = 0.22 ± 0.10 and σ KN-SGRB = 0.24 ± 0.12. The SNe-LGRBs are composed of GRBs associated spectroscopically with the SNe Ib,c, the KN-SGRBs are composed by eight GRBs associated with kilonovae or where there could have been such an association. The highest correlation coefficients are yielded for the SN-LGRB-ABC sample, which includes GRBs spectroscopically associated with SNe Ib/c or with a clear optical bump in the LC resembling the SNe Ib/c, ( ), the SN-LGRBs ( ), and the KN-SGRBs ( ) when the redshift evolution is considered. We find that these category planes are reliable candidates to use as cosmological tools. Furthermore, the distance from the gold fundamental plane is a crucial discriminant among classes. In fact, we find that the distributions of the distances of the SNe-LGRB, SNe-LGRB-ABC, KN-SGRB, and SGRB samples from the gold fundamental plane are statistically different from the distribution of the gold GRBs' distances from the gold fundamental plane with and without considering evolution cases. <

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

GAINN: The Galaxy Assembly and Interaction Neural Networks for High-redshift JWST Observations

We present the Galaxy Assembly and Interaction Neural Networks (Gainn), a series of artificial neural networks for predicting the redshift, stellar mass, halo mass, and mass-weighted age of simulated galaxies based on James Webb Space Telescope (JWST) photometry. Our goal is to determine the best neural network for predicting these variables at 11 < z < 15. The parameters of the optimal neural network can then be used to estimate these variables for real, observed galaxies. The inputs of the neural networks are JWST filter magnitudes of a subset of five broadband filters (F150W, F200W, F277W, F356W, and F444W) and two medium-band filters (F162M and F182M). We compare the performance of the neural networks using different combinations of these filters, as well as different activation functions and numbers of layers. The best neural network predicted redshift with a normalized rms error of $0.010^{+0.003}_{-0.001}$, stellar mass with rms = $0.089^{+0.044}_{-0.022}$, halo mass with a mean-squared error of $0.022^{+0.014}_{-0.008}$, and mass-weighted age with rms = $12.466^{+5.065}_{-2.408}$. We also test the performance of Gainn on real data from MACS0647JD, an object observed by JWST. Predictions from Gainn for the first projection of the object (JD1) have normalized bias $\langle$Δz$\rangle$ < 0.00228, which is significantly smaller than found with template-fitting methods. We find that the optimal filter combination is F277W, F356W, F162M, and F200W when considering both theoretical accuracy and observational resources from JWST.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Global variance decomposition of downscaled and bias-corrected CMIP6 climate projections

This dataset provides the results of a global variance decomposition of downscaled and bias-corrected CMIP6 climate projections. The total projection variance for a set of climate metrics is partitioned into contributions from: scenario uncertainty, model/GCM uncertainty, downscaling and bias-correction uncertainty, and interannual variability. The contribution from each source is expressed as a percentage of the total variance. Seven climate metrics are analyzed: Annual average temperature (avg_tas.nc) Annual total precipitation (tot_pr.nc) Annual maximum of daily maximum temperature (max_tasmax.nc) Annual maximum 1-day precipitation (max_pr.nc) Annual number of extremely hot days (hot_days.nc) Annual number of extremely wet days (wet_days.nc) Annual number of dry days (dry_days.nc) Extremely hot/wet days are defined to occur when temperature/precipitation exceeds the local 99th percentile defined over 1980-2014. Dry days are defined to occur when daily precipitation is less than 1mm. all_metrics_timesliced.nc gives the results for all metrics averaged over three 20-year periods: 2020-2039, 2050-2069, 2080-2099. For more details on the methods, see: Lafferty & Sriver, Downscaling and bias-correction contribute considerable uncertainty to local climate projections in CMIP6, npj Climate & Atmospheric Science (2023) An interactive visualization of this data can be found at: https://lafferty-sriver-2023-downscaling-uncertainty.msdlive.org

Lafferty, David↗
DOE OSTI2025

DESI-DR1 $3 \times 2$-pt analysis: consistent cosmology across weak lensing surveys

We present a joint cosmological analysis of projected galaxy clustering observations from the Dark Energy Spectroscopic Instrument Data Release 1 (DESI-DR1), and overlapping weak gravitational lensing observations from three datasets: the Kilo-Degree Survey (KiDS-1000), the Dark Energy Survey (DES-Y3), and the Hyper-Suprime-Cam Survey (HSC-Y3). This combination of large-scale structure probes allows us to measure a set of $3 \times 2$-pt correlation functions, breaking the degeneracies between parameters in cosmological fits to individual observables. We obtain mutually-consistent constraints on the parameter $S_8 = σ_8 \sqrt{Ω_{\rm m}/0.3} = 0.786^{+0.022}_{-0.019}$ from the combination of DESI-DR1 and DES-Y3, $S_8 = 0.760^{+0.020}_{-0.018}$ from KiDS-1000, and $S_8 = 0.771^{+0.026}_{-0.027}$ from HSC-Y3. These parameter determinations are consistent with fits to the Planck Cosmic Microwave Background dataset, albeit with $1.5-2σ$ lower values in the $S_8-Ω_{\rm m}$ plane. We perform our analysis with a unified pipeline tailored to the requirements of each cosmic shear survey, which self-consistently determines cosmological and astrophysical parameters. We generate an analytical covariance matrix for the correlation data including all cross-covariances between probes, and we design a new blinding procedure to safeguard our analysis against confirmation bias, whilst leaving goodness-of-fit statistics unchanged. Our study is part of a suite of papers that present joint cosmological analyses of DESI-DR1 and weak gravitational lensing datasets.

Porredon, A. [Madrid, CIEMAT; Edinburgh U., Inst. ↗
DOE OSTI2022

Turbulence-induced bias in time-averaged laser absorption tomography of correlated concentration and temperature fields with a first-order correction

The influence of correlated scalar fluctuations on time-averaged laser absorption tomography measurements of temperature and species in a piloted turbulent premixed flame was examined using a coupled spectroscopic and fluid-dynamic analysis. To understand bias associated with turbulence, spatio-temporally resolved temperature and species mole fraction profiles predicted by large eddy simulations (LES) were used to synthetically generate time-resolved line-of-sight absorption measurements at short time scales (microsecond) to reflect the unsteady nature of a canonical jet burner across various transverse measurement planes. Inversion methods were employed on the time-averaged line-of-sight data to produce radially-resolved temperature and mole fraction profiles, analogous to those produced by laser absorption tomography performed on a time-averaged axisymmetric flowfield. It is shown that bias in the measurements compared to true time-averaged scalar fields is a function primarily of temperature dependence in absorptivity and non-zero correlation between temperature and species concentration scalars. Finally, a first-order correction to tomography measurements is proposed to account for the bias based on estimated correlations and the known spectroscopic parameters of the probed absorption transitions.

42 ENGINEERING↗
DOE OSTI2024

Summertime Continental Shallow Cumulus Cloud Detection Using GOES‐16 Satellite and Ground‐Based Ceilometer at North Alabama

Abstract Accurate simulations of boundary layer cloud processes remain challenging in Earth system modeling. Observations are essential to evaluate and improve models of such processes. This study introduces a comprehensive validation framework for a satellite‐based detection algorithm of continental shallow cumulus (ShCu) clouds during the daytime, which was initially developed using ground‐based observations of stereo cameras at the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains site (J. Tian et al., 2021, https://doi.org/10.3390/rs13122309 , 2022, https://doi.org/10.1029/2021gl097070 ). To validate this algorithm, the framework employs ground‐based ceilometer measurements from North Alabama (NA) where ShCu populations are prevalent. This study first generates clear‐sky surface reflectance maps at NA and identifies ShCu pixels with a detection threshold using Geostationary Operational Environmental Satellite (GOES) reflectance data. The obtained cloud fractions (CFs) are then compared against CFs from a ground‐based ceilometer, considering factors such as observed area differences, satellite parallax issue, and systematic biases. We found that with a detection threshold (∆R) of 0.05, the ShCu detection algorithm is effective for NA, enabling the reproduction of hourly ShCu CFs using GOES. Our framework is straightforward and easily repeatable to evaluate the effectiveness of a ∆R threshold for detecting ShCu clouds in various geographic regions where ceilometers are deployed. This satellite detection of ShCu provides a crucial regional context for ground‐based measurements, facilitating the tracking of convection initiation and its coupling with land surface conditions. Integrating localized ground‐based and regional satellite data will enhance our ability to conduct thorough studies of cloud morphology and land‐atmosphere interactions in North Alabama.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Multitaper Magnitude‐Squared Coherence for Time Series With Missing Data: Understanding Oscillatory Processes Traced by Multiple Observables

To explore the hypothesis of a common source of variability in two time series, observers may estimate the magnitude-squared coherence (MSC), which is a frequency-domain view of the cross correlation. For time series that do not have uniform observing cadence, MSC can be estimated using Welch's overlapping segment averaging. However, multitaper has superior statistical properties to Welch's method in terms of the tradeoff between bias, variance, and bandwidth. The classical multitaper technique has recently been extended to accommodate time series with underlying uniform observing cadence from which some observations are missing. This situation is common for solar and geomagnetic data sets, which may have gaps due to breaks in satellite coverage, instrument downtime, or poor observing conditions. We demonstrate the scientific use of missing-data multitaper magnitude-squared coherence by detecting known solar mid-term oscillations in simultaneous, missing-data time series of solar Lyman α flux and geomagnetic Disturbance Storm Time index. Due to their superior statistical properties, we recommend that multitaper methods be used for all heliospheric time series with underlying uniform observing cadence.

Astro-statistics techniques (1886)↗
DOE OSTI2020

Spatially resolved absolute quantitation in thin tissue by mass spectrometry

Mass spectrometry (MS) has become the de facto tool for routine quantitative analysis of biomolecules. MS is increasingly being used to reveal the spatial distribution of proteins, metabolites, and pharmaceuticals in tissue and interest in this area has led to a number of novel spatially resolved MS technologies. Most spatially resolved MS measurements are qualitative in nature due to a myriad of potential biases, such as sample heterogeneity, sampling artifacts, and ionization effects. As applications of spatially resolved MS in the pharmacological and clinical fields increase, demand has become high for quantitative MS imaging and profiling data. As a result, several varied technologies now exist that provide differing levels of spatial and quantitative information. Furthermore, this review provides an overview of MS profiling and imaging technologies that have demonstrated quantitative analysis from tissue. Focus is given on the fundamental processes affecting quantitative analysis in an array of MS imaging and profiling technologies and methods to address these biases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Development of online pulse-finding algorithms for the Mu2e Stopping Target Monitor and an evaluation of the signal to background ratio for the Mu2e stopped-muon rate determination

This thesis presents a determination of the acceptance of the Mu2e Stopping Target Monitor (STM) detector for both signal and background events. The rate of X-rays of a specific energy in the STM is used to determine the rate of stopped muons in the aluminium stopping target, which is used as the normalisation for all Mu2e measurements, particularly the branching ratio for a charged lepton flavour violating (cLFV) process. The acceptance for the 347\,keV $2p-1s$ aluminium signal X-ray is determined to be $(8.03 \pm 0.05) \times 10^{-10}$\,cm$^{-2}$ and the acceptance for the background photons (at 347\,keV) to be $(3.19 \pm 0.21) \times 10^{-8}$\,cm$^{-2}$. This results in a signal-to-background ratio of approximately two which is significantly higher than had previously been estimated. These signal-to-background rates are used to determine the time required to achieve a statistical uncertainty of 10\% on the number of 347\,keV X-rays as a function of the detector resolution and back ground rate. For a resolution of 2\,keV, and the background rate determined in this thesis, approximately one minute of data is required. The three corrections needed to be applied to the measured 347\,keV rate to determine the rate of stopped muons are also determined and potential sources of bias arising from the background shape, background fit range and energy calibration are investigated and found to be insignificant. The raw energy of the particles in the STM detector comes from a 16-bit ADC digitising at $\sim 300$\,MHz. It is not possible to store all the raw digitisations and online algorithms have been developed to rapidly select pulses in the detector and reconstruct their energy. The performance of these algorithms has been characterised with simulated data as a function of detector rate and resolution and optimum operating points for the algorithms have been defined. The integrity of the algorithms has also been demonstrated and characterised on test-beam data at high r ates and with radioactive sources at low rates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Summary of NDC Capacity Building Workshop and Regional Seismic Travel Time (RSTT) in combination with Data Sharing and Integration Training

The NNSA Seismic Cooperation Program (SCP) sponsored Stephen Myers (LLNL), Michael Begnaud (LANL), Brian Young (SNL) and Istvan Bondar (Research Center for Astronomy and Earth Sciences, Hungary) to serve as a presenters/trainers at the “NDC Capacity Building Workshop and Regional Seismic Travel Time (RSTT) in combination with Data Sharing and Integration Training” September 4-8 2022 in Muscat, Oman (See Appendix A for the agenda). The workshop and training (workshop from here forward) was organized by the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) Provisional Technical Secretariat (PTS). The first half of the week was devoted to NDC workshop activities, and the second half was devoted to RSTT training. Fifty-five participants from 27 countries and the CTBTO-PTS attended the 5-day workshop (See Appendix B for list of participants and countries of origin). Presentations from the PTS described the International Monitoring System (IMS), International Data Centre (IDC) products, and metrics of regional data utilization. Contributed presentations from each country’s scientists included descriptions of regional and national networks, methods of data analysis, and needs for material and technical assistance. Training included an overview of the RSTT method and instruction on how to locate seismic events with the iLoc program, which utilizes RSTT travel times to reduce bias in event location estimates. Methods of seismic tomography and the need for a high-quality tomographic set, including seismological “ground truth”, were emphasized. Seismological “ground truth” or “GT” is a term that has come to mean both events with known location and events with well-characterized locations that are estimated using seismological data, typically with epicenter accuracy of 5 km or better. Notably, the instructional platform has migrated from UNIX shell scripts to Jupyter Notebooks. Jupyter Notebooks have the advantage being more visually intuitive, including display of graphics within the notebook. Each notebook includes every processing step that participants need to reproduce the entire exercise.

58 GEOSCIENCES↗
DOE OSTI2020

Clustering earthquake signals and background noises in continuous seismic data with unsupervised deep learning

The continuously growing amount of seismic data collected worldwide is outpacing our abilities for analysis, since to date, such datasets have been analyzed in a human-expert intensive, supervised fashion. Moreover, analyses that are conducted can be strongly biased by the standard models employed by seismologists. In response to both of these challenges, we develop a new unsupervised machine learning framework for detecting and clustering seismic signals in continuous seismic records. Our approach combines a deep scattering network and a Gaussian mixture model to cluster seismic signal segments and detect novel structures. To illustrate the power of the framework, we analyze seismic data acquired during the June 2017 Nuugaatsiaq, Greenland landslide. We demonstrate the blind detection and recovery of the repeating precursory seismicity that was recorded before the main landslide rupture, which suggests that our approach could lead to more informative forecasting of the seismic activity in seismogenic areas.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Experimental Covariance Determination for Critical Integral Experiments

Integral benchmarks for criticality safety and nuclear data validation require expensive uncertainty quantification studies. In general, uncertainty quantification techniques ignore correlations between experiments and shared parts. Experiments, such as the TEX (Thermal/Epithermal eXperiments) campaigns, consist of many shared parts, such as the ‘Jemima’ HEU fuel plates, which create a strong correlation in their uncertainties. While these correlations are known to exist, they are often not estimated due to the complexity of such calculations. This paper describes an intuitive method of determining the covariance for each of the experimental components, providing a correlation for each family of parts across the multiple cases examined within a benchmark. A proof-of-principle study using the TEX-HEU experimental campaign was performed and verified that the correlations can be calculated with information commonly found in the ICSBEP (International Criticality Safety Benchmark Evaluation Project) benchmarks. This study showed that the introduction of model and experimental covariances reduces the χ 2 per degree of freedom from 2.203 to 1.179, indicating that the omission causes overly pessimistic bias quantifications. This technique can be seamlessly integrated to current benchmark evaluations as well as reevaluations of legacy benchmarks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Hedonic Price Estimates of Lake Water Quality: Valued Attribute, Instrumental Variables, and Ecological-Economic Benefits

We estimate the effect of lake water quality on residential housing prices using cross-sectional data on water clarity from 113 lakes across the United States. An instrumental-variables approach is developed to address potential endogeneity bias in the water-clarity variable. Three lake-based physical variables serve as instrumental variables: total nitrogen concentration in lake water, total phosphorus concentration in lake water, and water temperature near the lake surface. The econometric results include three methodological findings: the instruments are valid and strong; the ordinary-least-squares estimate of the coefficient on the water-clarity variable is unbiased; and water clarity is the attribute of water quality valued in the housing market. The estimated water-clarity effect shows that a one-tenth of a meter change in water clarity leads to a one-percent change in housing price, or an elasticity of 0.20 at mean clarity. Coupling this effect with estimates of an ecological production function, a lake-specific benefit index is developed that shows the effect on housing values of bringing lakes into compliance with the US Environmental Protection Agency's regional recommendations for phosphorous concentration in lake waters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Empirical estimation of weather-driven yield shocks using biophysical characteristics for U.S. rainfed and irrigated maize, soybeans, and winter wheat

Agricultural yields are highly susceptible to changes in weather system patterns, including both annual and sub-annual changes in temperature and precipitation. Understanding the impacts of future changes in meteorological variables on crop yields have been widely studied in both empirical and process-based models. This work presents a structural econometric approach that combines historical weather data with information about the biophysical growth cycles of maize, winter wheat, and soy to predict the year-to-year yield responses for rainfed crops. Modeled soil moisture and temperature are taken as key predictors, which allows testing the fitted rainfed model’s ability to predict irrigated yields by assuming irrigation produces the numerically optimal level of soil moisture. This approach is grounded in known biophysical processes, which improves confidence in the model predictions. It produces estimates of interannual variability in yields, which enable study of the effects of extreme events on agricultural productivity. Finally, it enables prediction of the potential impacts of changing weather patterns on irrigated crops in areas that are currently primarily rainfed. We present the results of the empirical model, fitted with rainfed data; out-of-sample validation on irrigated crops; and projections of yield shocks under multiple future climate scenarios. Under a bias-corrected GFDL RCP8.5 scenario, this approach predicts average yield change, relative to 2006-2020 average yields, across U.S. counties in the 2040-2060 period of -16.9% and -13.4% for rainfed and irrigated maize, of -19.1% and -18.4% for rainfed and irrigated soy, and of -4.0% and -2.0% for rainfed and irrigated winter wheat. And in the 2070-2090 period of -30.3% and -28.8 % for rainfed and irrigated maize, of -33.1% and -32.8% for rainfed and irrigated soy, and of -6.5% and -5.2%for rainfed and irrigated winter wheat.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The Effects of Threshold Voltage and Number of Fins per Transistor on the TID Response of GF 12LP Technology

This abstract presents a comprehensive analysis of total ionizing dose (TID) response in GlobalFoundries’ 12LP 12nm bulk FinFET technology using 10keV X-rays. Devices with higher threshold voltages (VTs) demonstrated lower increases in off-state leakage current (IDS,OFF) post-irradiation, highlighting the mitigating role of high VT in TID response. Our data shows that transistors with fewer fins exhibit superior TID resistance, implying lower susceptibility to radiation effects. Our study also probed two bias conditions, "Gate-On" and "Pass-Gate," with the former displaying more severe TID degradation. Interestingly, p-type devices displayed negligible degradation, underscoring their inherent resilience to TID effects. Additionally, medium thick n-type devices echoed the fin-count-dependent TID response observed in other transistor types, further strengthening our findings. These results underscore the importance of strategic transistor selection and design for enhancing the TID resilience of future CMOS FinFET architectures, particularly critical in radiation-intense environments.

42 ENGINEERING↗
DOE OSTI2020

Computational Modeling of Heterogeneity of Stress, Charge, and Cyclic Damage in Composite Electrodes of Li-Ion Batteries

Charge heterogeneity is a prevalent feature in many electrochemical systems. In a commercial cathode of Li-ion batteries, the composite is hierarchically structured across multiple length scales including the sub-micron single-crystal primary-particle domains up to the macroscopic particle ensembles. The redox kinetics of charge transfer and mass transport strongly couples with mechanical stresses. This interplay catalyzes substantial heterogeneity in the charge (re)distribution, stresses, and mechanical damage in the composite electrode during charging and discharging. We assess the heterogeneous electrochemistry and mechanics in a LiNi x Mn y Co z O 2 (NMC) cathode using a fully coupled electro-chemo-mechanics model at the cell level. A microstructure-resolved model is constructed based on the synchrotron X-ray tomography data. We calculate the stress field in the composite and then quantitatively evaluate the kinetics of surface charge transfer and Li transport biased by mechanical stresses. We further model the cyclic behavior of the cell. The repetitive deformation of the active particles and the weakening of the interfacial strength cause gradual increase of the interfacial debonding. The mechanical damage impedes electron transfer, incurs more charge heterogeneity, and results in the capacity degradation in batteries over cycles.

25 ENERGY STORAGE↗
DOE OSTI2020

S/U Comparison Study with a Focus on USLs

Under a DOE Nuclear Criticality Safety Program (NCSP) task involving Analytical Methods, three Laboratories collaborated in a comparison of results obtained from Sensitivity/Uncertainty (S/U) packages relevant to validation of transport codes. The task involves Institut de Radioprotection et de Sûreté Nucléaire (IRSN), Los Alamos National Laboratory (LANL), and Oak Ridge National Laboratory (ORNL) comparing results of MORET 5/MACSENS V3.0, MCNP6.2/Whisper-1.1, and SCALE 6.2.3/TSUNAMI/USLSTATS respectively. All Monte Carlo transport code results utilize ENDF/B-VII.1. Four cases from the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) were selected as application models: HEU-MET-FAST-013-001, HEU-SOL-THERM 001-008, PU-MET-FAST-022-001, and PU-SOL-THERM 001-001. Ultimately, comparison is made between Upper Subcritical Limits (USLs) obtained using each code package for each application case. Since differences exist in whether packages take into account margin of subcriticality (MOS), the USL may be computed using bias and bias uncertainty, also known as the calculational margin (CM) in ANSI/ANS 8.24. Application of portions of MOS to the USL for nuclear data uncertainty of and potential code margin is referred to as USL herein. In either case, additional MOS is considered for actual application cases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗