Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Multifrequency observation of the optically violent variable quasar 3C 446

Nearly 20 years of optical and radio monitoring data as well as seven multifrequency spectra of the violently variable quasar 3C 446 are reported. The monitoring data suggest a correlation between the radio and optical outbursts, with the optical flare preceding the radio activity by 400-600 days. Considerable processing occurs in the optical-emitting plasma before it becomes radio-emitting plasma. Within the radio band, outbursts proceed from high to low frequencies. The flat radio spectrum turns over at 3-10 x 10 to the 11th Hz and the continuum steepens with frequency. The X-ray emission lies an order of magnitude above an extrapolation of the optical-UV spectrum and has a harder spectrum. The power is primarily concentrated in the submillimeter and infrared region. The data suggest that the X-rays are produced by the inverse Compton process from an emitting region smaller than but related to the synchrotron-emitting UV-IR region. The characteristic size of the emitting region increases with decreasing frequency.

Bregman, Joel N.↗

A Peak Generator for Gas Chromatography

Photoelectric peak generator for repeated reproduction of gas chromatogram peaks while data recording and integration variables are systematically studied

Johnson, R. D.↗

Space station/base food system study. Volume 2: System assessments

The evaluation modeling technique is described which was used to combine the candidate element concepts into systems that meet mission requirements. Results of the assessment are presented in terms of systems performance data and plots of system trade-off data by highest ranking variable.

Source record↗

Computer controlled performance mapping of thermionic converters: effect of collector, guard-ring potential imbalances on the observed collector current-density, voltage characteristics and limited range performance map of an etched-rhenium, niobium planar converter

The effect of collector, guard-ring potential imbalance on the observed collector-current-density J, collector-to-emitter voltage V characteristic was evaluated in a planar, fixed-space, guard-ringed thermionic converter. The J,V characteristic was swept in a period of 15 msec by a variable load. A computerized data acquisition system recorded test parameters. The results indicate minimal distortion of the J,V curve in the power output quadrant for the nominal guard-ring circuit configuration. Considerable distortion, along with a lowering of the ignited-mode striking voltage, was observed for the configuration with the emitter shorted to the guard ring. A limited-range performance map of an etched-rhenium, niobium, planar converter was obtained by using an improved computer program for the data acquisition system.

Manista, E. J.↗

OAO-2 observations of C III 1909 A line in gamma 2 Velorum

The C III 1909 A emission line in gamma 2 Velorum was observed over a period of 24 hours in an attempt to find short period time variability. Analysis of this data found no periods in the range of 0.5 to 200 minutes, and placed an upper limit of 3% on the amplitude of the stellar pulsations. Improved spectral resolution data for this line was obtained by offsetting the OAO-2 pointing in steps of 15 seconds of arc. The line profile derived by combining this offset data with the slit function shows a definite asymmetry. Although the improved resolution gives results which are barely sufficient for comparison with the prediction from model envelopes, some information concerning the abundance of carbon and the physical conditions of the envelope can be gained.

West, D. K.↗

Further joint X-ray, infrared and radio observations of Cygnus X-3

Observations of Cygnus X-3 were carried out at 2.5 - 7.5 keV, 2.2 micron, 8.1 GHz and 2.7 GHz over a two week period. The X-ray data show the periodic structure which is typical of Cyg X-3. At times the X-ray and infrared measurements show very similar periodic structure, both in phase and shape, while at other times the infrared data show no periodic variability. The radio fluxes were usually low during the period of observation; both the daily average radio flux levels and spectral index remained nearly constant.

Mason, K. O.↗

Use of remote sensing in agriculture

The remote sensing studies of (a) cultivated peanut areas in Southeastern Virginia; (b) studies at the Virginia Truck and Ornamentals Research Station near Painter, Virginia, the Eastern Virginia Research Station near Warsaw, Virginia, the Tidewater Research and Continuing Education Center near Suffolk, Virginia, and the Southern Piedmont Research and Continuing Education Center Blackstone, Virginia; and (c) land use classification studies at Virginia Beach, Virginia are presented. The practical feasibility of using false color infrared imagery to detect and determine the areal extent of peanut disease infestation of Cylindrocladium black rot and Sclerotinia blight is demonstrated. These diseases pose a severe hazard to this major agricultural food commodity. The value of remote sensing technology in terrain analyses and land use classification of diverse land areas is also investigated. Continued refinement of spectral signatures of major agronomic crops and documentation of pertinent environmental variables have provided a data base for the generation of an agricultural-environmental prediction model.

Pettry, D. E.↗

Further joint X-ray, infrared, and radio observations of Cygnus X-3

Observations of Cygnus X-3 have been carried out at 2.5-7.5 keV, 2.2 micrometers, 8.1 GHz, and 2.7 GHz over a two week period. The X-ray data show the periodic structure which is typical of Cyg X-3. At times the X-ray and infrared measurements show very similar periodic structure, both in phase and in shape, while at other times the infrared data show no periodic variability. The radio fluxes were unusually low during the period of observation; both the daily average radio flux levels and the spectral index remained nearly constant.

Mason, K. O.↗

Diminiode thermionic energy conversion with lanthanum-hexaboride electrodes

Thermionic conversion data obtained from a variable gap cesium diminiode with a hot pressed, sintered lanthanum hexaboride emitter and an arc melted lanthanum hexaboride collector are presented. Performance curves cover a range of temperatures: emitter 1500 to 1700 K, collector 750 to 1000 K, and cesium reservoir 370 to 510 K. Calculated values of emitter and collector work functions and barrier index are also given.

Kroeger, E. W.↗

Blade row dynamic digital compression program. Volume 2: J85 circumferential distortion redistribution model, effect of Stator characteristics, and stage characteristics sensitivity study

The results of dynamic digital blade row compressor model studies of a J85-13 engine are reported. The initial portion of the study was concerned with the calculation of the circumferential redistribution effects in the blade-free volumes forward and aft of the compression component. Although blade-free redistribution effects were estimated, no significant improvement over the parallel-compressor type solution in the prediction of total-pressure inlet distortion stability limit was obtained for the J85-13 engine. Further analysis was directed to identifying the rotor dynamic response to spatial circumferential distortions. Inclusion of the rotor dynamic response led to a considerable gain in the ability of the model to match the test data. The impact of variable stator loss on the prediction of the stability limit was evaluated. An assessment of measurement error on the derivation of the stage characteristics and predicted stability limit of the compressor was also performed.

Tesch, W. A.↗

Sialons as high temperature insulators

Sialons were evaluated for application as high temperature electrical insulators in contact with molybdenum and tungsten components in hard vacuum applications. Both D.C. and variable frequency A.C. resistivity data indicate the sialons to have electrical resistivity similar to common oxide in the 1000 C or higher range. Metallographic evaluations indicate good bonding of the type 15R ALN polytype to molybdenum and tungsten. The beta prime or modified silicon nitride phase was unacceptable in terms of vacuum stability. Additives effect on electrical resistivity. Similar resistivity decreases were produced by additions of molybdenum or tungsten to form cermets. The use of hot pressing at 1800 C with ALN, Al2 O3 and Si3N4 starting powders produced a better product than did a combination of SiO2 and AIN staring powders. It was indicated that sialons will be suitable insulators in the 1600K range in contact with molybdenum or tungsten if they are produced as a pure ceramic and subsequently bonded to the metal components at temperatures in the 1600K range.

Phillips, W. M.↗

Transient processes in the combustion of nitramine propellants

A transient combustion model of nitramine propellants is combined with an isentropic compression shock formation model to determine the role of nitramine propellant combustion in DDT, excluding effects associated with propellant structural properties or mechanical behavior. The model is derived to represent the closed pipe experiment that is widely used to characterize explosives, except that the combustible material is a monolithic charge rather than compressed powder. Computations reveal that the transient combustion process cannot by itself produce DDT by this model. Compressibility of the solid at high pressure is the key factor limiting pressure buildups created by the combustion. On the other hand, combustion mechanisms which promote pressure buildups are identified and related to propellant formulation variables. Additional combustion instability data for nitramine propellants are presented. Although measured combustion response continues to be low, more data are required to distinguish HMX and active binder component contributions. A design for a closed vessel apparatus for experimental studies of high pressure combustion is discussed.

Cohen, N. S.↗

CCEA second-generation wheat yield model for hard red wheat in North Dakota

The problem of estimating wheat yields for years with unusual planting dates and/or unusual phenological development is investigated. A yield model developed for hard red spring wheat in North Dakota using historical yields for crop reporting districts in conjunction with meteorological predictor variables based on weekly data is assessed.

Leduc, S. K.↗

A new coordinate transformation for turbulent boundary layer flows

The transformation permits a uniform mesh to be used in the computational coordinate which extends across the layer. This coordinate transformation uses the local value of the skin friction coefficient to scale the thickness of the wall layer region, and the local maximum value of turbulent viscosity to scale the boundary-layer thickness. Results are presented for two dimensional boundary layers in both positive and negative pressure gradients and comparisons are made with experimental data and conventional variable-grid results for low speed turbulent boundary-layers. The cases chosen illustrate the capability of this new transformation to capture the boundary layer growth over the full extent of laminar, transitional, and turbulent flow with no grid adjustment as well as its ability to consistently enlarge the wall layer region for accurate shear stress representation. Results of mesh refinement studies using the new coordinate transformation are presented.

Carter, J. E.↗

Basic research in wake vortex alleviation using a variable twist wing

The variable twist wing concept was used to investigate the relative effects of lift and turbulence distribution on the rolled up vortex wake. Several methods of reducing the vortex strength behind an aircraft were identified. These involve the redistribution of lift spanwise on the wing and drag distribution along the wing. Initial attempts to use the variable twist wing velocity data to validate the WAKE computer code have shown a strong correlation, although the vorticity levels were not exactly matched.

Morris, D. J.↗

Numerical approximation of boundary conditions with applications to inviscid equations of gas dynamics

A comprehensive overview of the state of the art of well-posedness and stability analysis of difference approximations for initial boundary value problems of the hyperbolic type is presented. The applicability of recent theoretical development to practical calculations for nonlinear gas dynamics is examined. The one dimensional inviscid gas dynamics equations in conservation law form are selected for numerical experiments. The class of implicit schemes developed from linear multistep methods in ordinary differential equations is chosen and the use of linear extrapolation as an explicit or implicit boundary scheme is emphasized. Specification of boundary data in the primitive variables and computation in terms of the conservative variables in the interior is discussed. Some numerical examples for the quasi-one-dimensional nozzle are given.

Yee, H. C.↗

A diagnostic model for studying daytime urban air quality trends

A single cell Eulerian photochemical air quality simulation model was developed and validated for selected days of the 1976 St. Louis Regional Air Pollution Study (RAPS) data sets; parameterizations of variables in the model and validation studies using the model are discussed. Good agreement was obtained between measured and modeled concentrations of NO, CO, and NO2 for all days simulated. The maximum concentration of O3 was also predicted well. Predicted species concentrations were relatively insensitive to small variations in CO and NOx emissions and to the concentrations of species which are entrained as the mixed layer rises.

Brewer, D. A.↗

User's manual for a computer program to calculate discrete frequency noise of conventional and advanced propellers

A user's manual is presented for a computer program for the calculation of discrete frequency noise of conventional and advanced propellers. The structure of the program and the subroutines describing the input functions are discussed. Input variables and their default values and the variables in the output data sheet are defined. Two versions of the program are available. These differ only in the graphic output capability. One version has only printed output capability. A second version with extensive graphic output capability is available for the computer system at Langley. This Manual includes four detailed examples of both the printed and graphic outputs. These examples may be reproduced by users to check their code on their computer system.

Martin, R. M.↗