Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Electron irradiation effects on the optical properties of Hf- and Zn-doped β -Ga 2 O 3

Optical and electrical properties of Hf- and Zn-doped β-Ga 2 O 3 samples, which are n-type and insulating, respectively, were altered via high-energy electron irradiation at 2.5 or 0.5 MeV. The β-Ga 2 O 3 :Hf samples irradiated with 2.5 MeV electrons experienced a color change from blue to yellow and a large drop in conductivity, attributed to the creation of gallium vacancies, which compensate donors. This irradiation resulted in the absence of free carrier absorption and the presence of Cr 3+ photoluminescence (PL). PL mapping prior to irradiation revealed optically active ZnO precipitates that formed during the growth of β-Ga 2 O 3 :Zn. These precipitates have a 384 nm (3.23 eV) stacking fault emission in the core; in the outer shell of the precipitate, the PL blue-shifts to 377 nm (3.29 eV) and a broad defect band is observed. After 0.5 MeV electron irradiation, the defect band broadened and increased in intensity. The blue PL band (435 nm) of β-Ga 2 O 3 was enhanced for both Hf- and Zn-doped samples irradiated with 0.5 MeV. This enhancement is correlated with an increase in oxygen vacancies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The influence of waveguide doping on the output characteristics of AlGaAs/GaAs lasers

The influence of doping of waveguide layers on the output characteristics of lasers based on AlGaAs/GaAs double separate-confinement heterostructures is analysed. The heterostructures with narrow and broadened waveguides are studied. Samples of laser diode bars with undoped and doped waveguide layers are experimentally fabricated and compared. It is shown that the latter type of structures with a broadened waveguide allows one to increase the output power of the laser diode bars by 10 % – 15 %, all other conditions being equal. (lasers. control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Doping evolution of the Mott–Hubbard landscape in infinite-layer nickelates

The recent observation of superconductivity in N d 0.8 S r 0.2 N i O 2 has raised fundamental questions about the hierarchy of the underlying electronic structure. Calculations suggest that this system falls in the Mott–Hubbard regime, rather than the charge-transfer configuration of other nickel oxides and the superconducting cuprates. Here, we use state-of-the-art, locally resolved electron energy-loss spectroscopy to directly probe the Mott–Hubbard character of N d 1 − x S r x N i O 2 . Upon doping, we observe emergent hybridization reminiscent of the Zhang–Rice singlet via the oxygen-projected states, modification of the Nd 5d states, and the systematic evolution of Ni 3d hybridization and filling. These experimental data provide direct evidence for the multiband electronic structure of the superconducting infinite-layer nickelates, particularly via the effects of hole doping on not only the oxygen but also nickel and rare-earth bands.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Intercalation leads to inverse layer dependence of friction on chemically doped MoS 2

Here, we present results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS 2 ). In stark contrast to the widespread observation of decreasing friction with increasing number of layers on two-dimensional (2D) materials, friction on Re-doped MoS 2 exhibits an anomalous, i.e. inverse, dependence on the number of layers. Raman spectroscopy measurements combined with ab initio calculations reveal signatures of Re intercalation. Calculations suggest an increase in out-of-plane stiffness that inversely correlates with the number of layers as the physical mechanism behind this remarkable observation, revealing a distinctive regime of puckering for 2D materials.

42 ENGINEERING↗
DOE OSTI2021

Tuning 2D magnetism in Fe 3+X GeTe 2 films by element doping

Two-dimensional (2D) ferromagnetic materials have been discovered with tunable magnetism and orbital-driven nodal-line features. Controlling the 2D magnetism in exfoliated nanoflakes via electric/magnetic fields enables a boosted Curie temperature (T C ) or phase transitions. One of the challenges, however, is the realization of high T C 2D magnets that are tunable, robust and suitable for large scale fabrication. Here, we report molecular-beam epitaxy growth of wafer-scale Fe 3+X GeTe 2 films with T C above room temperature. By controlling the Fe composition in Fe 3+X GeTe 2 , a continuously modulated T C in a broad range of 185–320 K has been achieved. This widely tunable T C is attributed to the doped interlayer Fe that provides a 40% enhancement around the optimal composition X = 2. We further fabricated magnetic tunneling junction device arrays that exhibit clear tunneling signals. Our results show an effective and reliable approach, i.e. element doping, to producing robust and tunable ferromagnetism beyond room temperature in a large-scale 2D Fe 3+X GeTe 2 fashion.

2D ferromagnetic material↗
DOE OSTI2020

Probing free carrier plasmons in doped semiconductors using spatially resolved electron energy loss spectroscopy

We report spatially resolved measurements of free carrier collective excitations in a doped semiconductor. Using ~10 meV resolution electron energy loss spectroscopy (EELS) in an electron microscope with Å spatial resolution, we identify both surface and bulk carrier plasmons at infrared energies in a freestanding film of indium tin oxide (ITO). The interference patterns of long wavelength propagating surface carrier plasmons are revealed using spatially resolved EELS, from which we extract a dispersion relation. We further show that the energies of these plasmons vary near the surfaces and grain boundaries of the film due to band bending. Modeling based on dielectric theory agrees very well with experimental results. Finally, carrier plasmons in amorphous and crystalline ITO films are compared. These results should also be helpful for understanding the free carrier plasmons in other doped semiconductors in nanoscale volumes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Carbon complexes in highly C-doped GaN

We investigate the properties of heavily C-doped GaN grown by hydride vapor phase epitaxy using both optical experiments and hybrid density functional theory calculations. Previous work has established that carbon acceptors (C N ) give rise to a yellow luminescence band near 2.2 eV along with a blue luminescence band near 2.9 eV. Photoluminescence measurements show the yellow band shifting as a function of carbon concentration, suggesting a change in the behavior of carbon species as carbon content increases. With hybrid density functional theory we calculate the electrical and optical behavior of carbon centers containing multiple carbon impurities, which may arise in heavily doped material. We compare the behavior of these complexes to the isolated centers, and find that the dicarbon donor-acceptor (C Ga –C N ) complex is a candidate to explain the shift in the yellow luminescence peak. Tricarbon complexes have high formation energies and modest binding energies, and also give rise to optical transitions that are inconsistent with the observed spectra. We also identify the split dicarbon interstitial on the gallium site as a low-energy species with a large binding energy that may act to compensate carbon acceptors. Here, local vibrational modes are calculated for carbon impurity centers, and we compare these results to recent experiments. Dicarbon and tricarbon complexes involving C Ga and C N exhibit modes that are only slightly higher than the isolated species, while carbon interstitials and related complexes give rise to vibrational modes much higher than C Ga and C N .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Composite excitonic states in doped semiconductors

We present a theoretical model of composite excitonic states in doped semiconductors. Many-body interactions between a photoexcited electron-hole pair and the electron gas are integrated into a computationally tractable few-body problem, solved by the variational method. We focus on electron-doped monolayer (ML)-MoSe 2 and ML-WSe 2 due to the contrasting character of their conduction bands. In both cases, the core of the composite is a tightly bound trion (two electrons and a valence-band hole) surrounded by a region depleted of electrons. The composite in ML-WSe 2 further includes a satellite electron with different quantum numbers. The theory is general and can be applied to semiconductors with various energy-band properties, allowing one to calculate their excitonic states and to quantify the interaction with the Fermi sea.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Doping as a tuning mechanism for magnetothermoelectric effects to improve z T in polycrystalline NbP

Weyl semimetals combine topological and semimetallic effects, making them candidates for interesting and effective thermoelectric transport properties. Here, we present experimental results on polycrystalline NbP, demonstrating the simultaneous existence of a large Nernst effect and a large magneto-Seebeck effect, which is typically not observed in a single material at the same temperature. We compare transport results from two polycrystalline samples of NbP with previously published work, observing a shift in the temperature at which the maximum Nernst and magneto-Seebeck thermopowers occur, while still maintaining thermopowers of similar magnitude. Theoretical modeling shows how doping strongly alters both the Seebeck and Nernst magneto-thermopowers by shifting the temperature-dependent chemical potential, and the corresponding calculations provide a consistent interpretation of our results. Thus, we offer doping as a tuning mechanism for shifting magneto-thermoelectric effects to temperatures appropriate for device applications, improving zT at desirable operating temperatures. Furthermore, the simultaneous presence of both a large Nernst and magneto-Seebeck thermopower is uncommon and offers unique device advantages if the thermopowers are used additively. Finally, we also propose a unique thermoelectric device which would collectively harness the large Nernst and magneto-Seebeck thermopowers to greatly enhance the output and zT of conventional thermoelectric devices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Spectral emission properties of a nitrogen-doped diamond (001) photocathode: Hot electron transport and transverse momentum filtering

The electron emission properties of a single-crystal nitrogen-doped diamond(001) photocathode inserted in a 10 kV DC photoelectron gun are determined using a tunable (235–410 nm) ultraviolet laser radiation source for photoemission from both the back nitrogen-doped substrate face and the front homoepitaxially grown and undoped diamond crystal face. Here, the measured spectral trends of the mean transverse energy and quantum efficiency of the emitted electrons are both anomalous and nonmonotonic, but are shown to be consistent with (i) the known physics of electron photoexcitation from the nitrogen substitution states into the conduction bands of diamond, (ii) the energy position and dispersion characteristics of the conduction bands of diamond in the (001) emission direction, (iii) the effective electron affinity of the crystal faces, (iv) the strong electron-(optical)phonon coupling in diamond, and (v) the associated hot electron transport dynamics under energy equipartition with the optical phonons. Notably, the observed hot electron emission is shown to be restricted parallel to the photocathode surface by the low transverse effective masses of the emitting band states—a transverse momentum filtering effect.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evolution of the Magnetic Excitations in Electron-Doped La 2 - x Ce x CuO 4

Here we investigated the high energy spin excitations in electron-doped La 2-x Ce x CuO 4 , a cuprate superconductor, by resonant inelastic x-ray scattering (RIXS) measurements. Efforts were paid to disentangle the paramagnon signal from non-spin-flip spectral weight mixing in the RIXS spectrum at Q ∥ =(0.6π,0) and (0.9π,0) along the (1 0) direction. Our results show that, for doping level x from 0.07 to 0.185, the variation of the paramagnon excitation energy is marginal. We discuss the implication of our results in connection with the evolution of the electron correlation strength in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Thickness dependent itinerant ferromagnetism in ultrathin Ba-doped SrRu O 3 films

The electronic and magnetic properties in AB⁢O 3 perovskite oxides are extremely sensitive to lattice structure, but also to dimensionality, such as the thickness in thin film-form. Here, we report the thickness-dependent electromagnetic properties of ultrathin epitaxially stabilized Sr 1-x ⁢Ba x ⁢Ru⁢O 3 (x = 0.08, 0.2) thin films on a SrTi⁢O 3 (001) substrate. The results reveal that the barium doping (0.08 ≤ x ≤ 0.20) reduces Ru⁢O 6 orthorhombic distortions existing in SrRu⁢O 3 and induces a tetragonal distortion, as evidenced by out-of-plane lattice expansion. A metal-to-insulator transition, accompanied by a ferromagnetic to nonmagnetic transition occurs with reducing film thickness from 10 to 3 unit cells for both x = 0.08 and 0.2, regardless of the doping level. The results suggest that the effects of compositional vacancies and surface/interface contributions introduced via dimensional confinement are more dominant than A-site chemical disorder or structural distortion for the loss of metallicity and ferromagnetism in ultra-thin epitaxial films.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Metallization and spin fluctuations in Cu-doped lead apatite

An electronic structure and magnetic properties analysis of the recently proposed Cu-doped lead apatite is performed. Here, we show that electronic structures of differently Cu-substituted structures are characterized by localized molecular Cu-O bands at or near the Fermi level. The Cu substitutions can happen at both Pb1 and Pb2 sites, leading to metallic and semiconducting systems differently. The electronic systems in these bands are highly unstable magnetically and form clusters of rigidly ferromagnetically coupled magnetic moments on Cu and neighboring oxygen atoms with a total moment of about 1µ B . The ground state of uniformly Cu-doped lead apatite appears to be magnetic and semiconducting. The nonuniform distribution of two Cu atoms at the nearest Pb2 sites leads to an antiferromagnetic semiconducting state with formation energy close to uniformly distributed Cu configurations. The inclusion of quantum spin fluctuations confirms the stability of magnetic Cu-O clusters. Our calculations revealed the absence of the long-range magnetic order between uniformly distributed Cu-O clusters, creating the spin glass type of system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electronic structure of nitrogen-doped lutetium hydrides

First-principles density functional theory (DFT) calculations of supercell structures based on N-doped Fm $\bar3$m LuH 3 reveal configurations of Fm $\bar3$m Lu 8 H 23–x N that exhibit novel electronic properties such as flat bands, sharply peaked densities of states (van Hove singularities, vHs), and intersecting Dirac cones near the Fermi energy (E F ). These electronic properties are present when N substitutes H in the octahedral interstices of Fm $\bar3$ m LuH 3 . These structures also exhibit an interconnected metallic hydrogen network, a common feature of high-T c hydride superconductors. Electronic property systematics gives an estimate of T c for one structure that is well above the critical temperatures predicted for structures considered previously. DFT + U has an especially strong effect on one of the structures considered, enhancing the vHs and flat bands near E F . Finally, these results provide a basis for understanding the electronic properties observed for nitrogen-doped lutetium hydride.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Disentangling the role of bond lengths and orbital symmetries in controlling $T_c$ of optimally doped YBa 2 Cu 3 O 7

Optimally doped YBa 2 Cu 3 O 7 (YBCO) has a high critical temperature, at 92 K. It is largely believed that Cooper pairs form in YBCO and other cuprates because of spin fluctuations, but the issue and the detailed mechanism are far from settled. In the present work, we employ a state-of-the-art first-principles ability to compute both the low- and high-energy spin fluctuations in optimally doped YBCO. We benchmark our results against recent inelastic neutron scattering and resonant inelastic x-ray scattering measurements. Further, we use strain as an external parameter to modulate the spin fluctuations and superconductivity. We disentangle the roles of barium-apical oxygen hybridization, interlayer coupling, and orbital symmetries by applying an idealized strain, and also a strain with a fully relaxed structure. We show that shortening the distance between Cu layers is conducive to enhanced Fermi surface nesting, which increases spin fluctuations and drives up $T_c$. However, when the structure is fully relaxed, electrons flow to the $d_{z^2}$ orbital as a consequence of a shortened Ba-O bond, which is detrimental for superconductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Defect Study of Group V Doped CdTe By Thermoelectric Effect Spectroscopy

Shallow acceptors in single crystal CdTe induced by Group V (P, As, and Sb) doping are identified by thermoelectric effect spectroscopy (TEES). Understanding defects in Group V doped CdTe is critical to improving and controlling the acceptor density and lifetime in the absorber material which is an important factor determining the open circuit voltage and efficiency in CdTe solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Doping CdSexTe1-x/CdTe Graded Absorber Films with Arsenic for Thin-Film Photovoltaics

CdTe thin-film photovoltaics have demonstrated some of the lowest costs of electricity generation owing to its low material cost and ease of manufacturing. However, the full potential of polycrystalline CdTe photovoltaics can only be realized if the open-circuit voltage can be increased beyond 1 V Open-circuit voltage ~850-900 mV has been consistently observed for state-of-the-art polycrystalline CdTe solar cells. Open-circuit voltage of over 1V has been demonstrated for single crystal CdTe devices by doping with Group V elements. Therefore, this study is aimed at understanding behavior of polycrystalline CdTe devices with arsenic doping, its activation and process and performance optimization in order to overcome current voltage limitations in CdTe solar cells.

14 SOLAR ENERGY↗
DOE OSTI2023

Effects of rhodium doping on dislocation nucleation in a [001] SrNi 2 P 2 single crystal under spherical nanoindentation

Nanoindentation was performed on SrNi 2 P 2 single crystals and their dilute solid solutions, Sr(Ni 1–x Rh x ) 2 P 2 (x = 0 ~ 0.055), under [001] loading to investigate the effects of elemental doping on Young’s modulus and dislocation nucleation stress. The results show that Young’s modulus and the dislocation nucleation stress decrease as the Rh content increases, and their Rh content dependence also varies with the Rh content. Electron diffraction analysis and the anisotropic lattice distortion calculations revealed that a local structural transition from the orthorhombic superstructure to the tetragonal structure and local compressive residual stresses could be the main reasons for the decrease in Young’s modulus and dislocation nucleation stress, respectively. The overlap of stress–strain fields between Rh atoms and the associated local structural transition contribute to their Rh content dependence. Here, the results also indicate that elemental doping does not necessarily strengthen materials if the incipient plasticity is controlled by dislocation nucleation, unlike conventional solid solution strengthening.

36 MATERIALS SCIENCE↗