Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DFT Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Towards extreme fast charging of 4.6V LiCoO 2 via mitigating high-voltage kinetic hindrance

High-voltage LiCoO 2 (LCO) is an attractive cathode for ultra-high energy density lithium-ion batteries (LIBs) in the 3C markets. However, the sluggish lithium-ion diffusion at high voltage significantly hampers its rate capability. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that the kinetic limitations can be mitigated by a facial Mg 2+ +Gd 3+ co-doping method. The as-prepared LCO shows significantly enhanced Li-ion diffusion mobility at high voltage, making more homogenous Li-ion de/intercalation at a high-rate charge/discharge process. The homogeneity enables the structural stability of LCO at a high-rate current density, inhibiting stress accumulation and irreversible phase transition. When used in combination with a Li metal anode, the doped LCO shows an extreme fast charging (XFC) capability, with a superior high capacity of 193.1 mAhg -1 even at the current density of 20C and high-rate capacity retention of 91.3% after 100 cycles at 5C. In conclusion, this work provides a new insight to prepare XFC high-voltage LCO cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Electronic, magnetic, and optical properties of bulk and (1 1 1)-surfaces of CoMnZnSi quaternary Heusler alloy

The structural stability, electronic structure, and magnetic and optical properties of CoMnZnSi quaternary Heusler alloy (QHA) in the bulk and (1 1 1)-slab forms have been investigated by performing density functional theory (DFT) calculations. Formation and cohesive energies, and elastic constants confirm that the bulk CoMnZnSi is chemically and mechanically stable at an equilibrium lattice parameter of 5.81 Å. The calculated elastic constants also indicate that this QHA has ductile and anisotropic features. We investigate and discuss the bonding behavior from charge density distribution and density of states. Furthermore, these calculations in the bulk phase show a perfect half-metallic behavior with an integer value of magnetic moment (4 µB) and a large spin-flip gap of 0.39 eV. On the other hand, the Co (1 1 1) and Si (1 1 1)-slabs exhibit semi-metallic nature at the Fermi level. These results indicate that CoMnZnSi qualifies for spintronic applications. In the bulk and Co (1 1 1), Zn (1 1 1), and Si (1 1 1)-surfaces, the magnetic moment of Co and Mn atoms are ferromagnetically aligned, while the ferrimagnetic alignment of Co with Mn has been found in Mn (1 1 1)-surface. We also investigate the optimal conductivity, dielectric functions, reflectivity, absorption coefficient, refractive index, and loss function to understand the underlying optical properties of this alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetic structure and magnetodielectric behavior of the chiral magnet CoTeMoO 6

We investigate the magnetic structure and magnetodielectric behavior of the chiral magnet CoTeMoO 6 (CTMO) through neutron diffraction, magnetization, and magnetodielectric measurements, complemented by density functional theory (DFT) calculations. Our findings reveal a canted magnetic structure with moments confined to the ab plane, giving rise to weak ferromagnetism under an external magnetic field. Additionally, we observe magnetodielectric coupling that strongly correlates with the magnetic ordering temperature and magnetic structure. Furthermore, these results are discussed in the context of potential mechanisms involving spin-dependent p-d hybridization and spin-phonon coupling.

Canted magnetism↗
DOE OSTI2020

Nd, SbNd and Sb 3 Nd 4 and their interactions with the cladding alloy HT9

Lanthanide fission products, such as neodymium, formed during the irradiation of metallic fuels are known to cause deleterious effects from chemical interactions occurring at the fuel-cladding interface; a phenomenon known as fuel-cladding chemical interaction (FCCI). The use of fuel-based additives that bind with the lanthanide elements within the fuel meat, alleviating their interactions at the fuel-cladding interface, is one potential method proposed to mitigate the FCCI phenomenon and extend the burnup potential of such metallic fuel systems. In this study, antimony (Sb) is evaluated as one such additive, and neodymium (Nd) is used to represent the lanthanides. A Sb-Nd alloy is fabricated, which consists of two intermetallic phases, SbNd and Sb 3 Nd 4 . Isothermal diffusion couple experiments are carried out at 675 °C for 24 h between Nd and the Fe-12Cr based HT9 cladding alloy. The results are compared against similar diffusion couple experiments carried out between the Sb-Nd alloy and also HT9. Inter-diffusion between Nd/HT9 diffusion couple is characterized and the phases Fe 17 Nd 5 and Fe 17 Nd 2 were found to form whereas no interactions were observed in the Sb-Nd/HT9 diffusion couple. The lack of compound forming tendencies between Fe, the primary alloying constituent of HT9, and SbNd is elucidated through density functional theory (DFT) calculations on enthalpy of mixing, aligning well with the experimental observations. Lastly, the strong binding of Nd with Sb appears to be favorable, alleviating Nd interactions with HT9 constituent elements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Evaluation of Sb-Nd and Te-Nd phases within the U-Zr fuel matrix and their interactions with HT9 alloy

Antimony (Sb) and tellurium (Te) were investigated as potential additives for U-10Zr (wt.%) metallic fuel to limit the fuel-cladding chemical interaction (FCCI) with HT-9 alloy. Neodymium (Nd) was utilized to simulate the formation of lanthanide-based solid fission products which are known to play a detrimental role in FCCI. Fuel alloys of U-Zr-Sb-Nd and U-Zr-Te-Nd were evaluated in their annealed condition and compared against their as-cast conditions. Isothermal diffusion couple experiments were performed between U-Zr-Nd, U-Zr-Sb-Nd, and U-Zr-Te-Nd against the cladding alloy HT9 to evaluate the effectiveness of the additives to stabilize Nd within the fuel alloys, as well as investigate the interaction regions that form between the different fuel alloys and HT9. Further, SbNd and Sb 3 Nd 4 , and TeNd are found to be the primary neodymium-based phases formed in the U-Zr-Sb-Nd and U-Zr-Te-Nd alloys, respectively. The zirconium-based phase, Zr 2 Sb, is also found to form within the former alloy. All phases were found to remain stable through the diffusion experiments and exhibited no interaction with HT9 constituent elements. Preferential interaction between Nd with additivities Te and Sb compared to constituting elements in HT9 was further verified based on density functional theory (DFT) calculated enthalpy of mixing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Raman spectroscopy of zirconium hydride

The characterization of zirconium hydride is important in the nuclear industry because of the hydrogen-induced embrittlement of Zircaloy cladding and its use as a neutron moderator. This paper introduces the use of Raman spectroscopy for the characterization of zirconium hydride. First-principles density functional theory (DFT) calculations were used to predict the Raman spectra of ζ-ZrH 0.5 , γ-ZrH, δ-ZrH 1.5 , δ-ZrH 1.66 , and ε-ZrH 2 with all their predicted symmetries; ζ-ZrH 0.5 (P3m1, R$\overline{3}$m, C2/m, Cm, Cmmm, and Pn$\overline{3}$m); γ-ZrH (P222, Ccce, and P4 2 /mmc); δ-ZrH 1.5 (P$\overline{4}$m2, P4 2 /mcm, Fmmm, Pn$\overline{3}$m, Ibam, P2/c, PI, and P4 2 /nnm); δ-ZrH 1.66 (Fm$\overline{3}$m); and ε-ZrH 2 (Fm$\overline{3}$m, R$\overline{3}$m, and I 4 /mmm). Two samples of Zircaloy-4 containing 133 wt ppm and 360 wt ppm hydrogen were characterized by Raman spectroscopy, showing two signal lines at 215 cm -1 and 1,187 cm -1 , which were assigned to the presence of δ-ZrH 1.66 . These signals had a good spatial correlation with visible hydride precipitates in Raman spectroscopy images. In conclusion, this work provides the basis for the characterization of all possible zirconium hydride compositions and structures using Raman spectroscopy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

First-principles investigation of cerium and neodymium diffusion in BCC chromium and vanadium via vacancy-mediated transport

Lanthanide transport plays a crucial role in the performance and longevity of metallic nuclear fuels. This study examines the diffusion behavior of Ce and Nd—two major fission products—in body-centered cubic (BCC) Cr and V, which are potential liner or coating materials for mitigating fuel-cladding chemical interactions (FCCI). Using density functional theory (DFT) calculations and self-consistent mean-field (SCMF) analysis, the vacancy-mediated diffusion coefficients are evaluated. Our findings reveal that Ce and Nd act as oversized solutes and are strongly bound to vacancies in BCC Cr and V, with diffusivities in Cr significantly lower than in V and in hexagonal closed-packed (HCP) Zr, as investigated in our previous work. The activation energies for Ce and Nd diffusion are 3.39 and 3.32 eV, respectively, in BCC Cr, and 2.56 and 2.33 eV, respectively, in BCC V. Analysis of vacancy drag and partial diffusion coefficient ratios indicates a strong tendency for lanthanide enrichment at vacancy sinks in BCC Cr, and to a lesser extent in BCC V, with this effect persisting up to the melting point in Cr and remaining substantial for Nd in V at high temperatures. Under irradiation, the increase in vacancy concentration is expected to enhance lanthanide transport, potentially accelerating interactions at liner-cladding interfaces. Although BCC Cr exhibits relatively low lanthanide diffusivities under equilibrium conditions, the expected segregation tendencies under irradiation suggest that Zr liners may be a more favorable option. Further investigations using rate theory, cluster dynamics, and phase-field modeling are required to quantitatively assess the performance of these materials in reactor environments.

36 - MATERIALS SCIENCE↗
DOE OSTI2023

Kinetic study of the azo – Hydrazone photoinduced mechanism in complexes with a -Re(CO) 3 L 0/+ core by flash photolysis

The photoprocesses of three rhenium(I) tricarbonyl complexes, fac-Re(NN)(CO) 3 L 0/+ , bearing an azo/hydrazone ligand, NN, and L = Cl, Br or CH 3 CN as axial ligand, were studied by time-resolved spectroscopic techniques. Flash irradiation of deaerated solutions of the complexes in acetonitrile photogenerated intermediates with intense optical absorptions in the UV–vis spectral region of the hydrazone ligand. The decay of the intermediates photogenerated with the Cl, Br and CH 3 CN ligands in the axial position proceeds by three different mechanisms. For the fac-Re(NN)(CO) 3 Cl, a three-step mechanism involving isomerization, tautomerization and rotation accounts for the spectroscopic transformations. In contrast to the flash photolysis result, the continuous photolysis of the complex in acetonitrile does not show spectroscopic changes associated with the generation of a stable product, i.e., the complex exhibits a photoreversible behavior. The first step observed in the flash irradiation of fac-Re(NN)(CO) 3 Cl, is missing in the decay of the photogenerated intermediates with fac-Re(NN)(CO) 3 Br and fac-[Re(NN)(CO) 3 CH 3 CN] + . A possible reason for this absence is that the process is too fast for the time-response of the flash photolysis set-up. Time-resolved spectra and associated reaction rate data for the Re(I) complexes are communicated and discussed. Finally, DFT calculations support a plausible E → Z mechanism with thermal back-isomerization mediated by tautomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantitative nanoscale tracking of oxygen vacancy diffusion inside single ceria grains by in situ transmission electron microscopy

Oxygen vacancy formation and migration in ceria is critical to its electrochemical and catalytic properties in systems for chemical and energy transformation, but its quantification is rather challenging especially at atomic-scale because of disordered distribution. Here we report a rational approach to track oxygen vacancy diffusion in single grains of pure and Sm-doped ceria at -20 °C to 160 °C using in situ (scanning) transmission electron microscopy ((S)TEM). To create a gradient in oxygen vacancy concentration, a small region (~30 nm in diameter) inside a ceria grain is reduced to the C-type CeO 1.68 phase by the ionization or radiolysis effect of a high-energy electron beam. The evolution in oxygen vacancy concentration is then mapped through lattice expansion measurement using scanning nano-beam diffraction or 4D STEM at a spatial resolution better than 2 nm; this allows direct determination of local oxygen vacancy diffusion coefficients in a very small domain inside pure and Sm-doped ceria at different temperatures. Further, the activation energies for oxygen transport are determined to be 0.59, 0.66, 1.12, and 1.27 eV for pure CeO 2 , Ce 0.94 Sm 0.06 O 1.97 , Ce 0.89 Sm 0.11 O 1.945 , and Ce 0.8 Sm 0.2 O 1.9 , respectively, implying that activation energy increases due to impurity scattering. The results are qualitatively supported by density functional theory (DFT) calculations. In addition, our in situ TEM investigation reveals that dislocations impede oxygen vacancy diffusion by absorbing oxygen vacancies from the surrounding areas and pinning them locally. With more oxygen vacancies absorbed, dislocations show extended strain fields with local tensile zone sandwiched between the compressed ones. Therefore, dislocation density should be reduced in order to minimize the resistance to oxygen vacancy diffusion at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Influence of Al location on formation of silver clusters in mordenite

Formation of zeolite supported Ag 0 clusters depends on a combination of thermodynamically stable atomic configurations, charge balance considerations, and mobility of species on the surface and within pores. Periodic density functional theory (DFT) calculations were performed to evaluate how the location of Al in the mordenite (MOR) framework and humidity control Ag 0 nanocluster formation. Four Al framework sites were studied (T1-T4) and the Al positions in the framework were identified by the shifts in the differential Al…Al pair distribution function (PDF). Furthermore, structural information about the Ag 0 nanoclusters, such as dangling bonds, can be identified by Ag…Ag PDF data. For Ag 0 formation in vacuum MOR structures with a Si:Al ratio of 5:1 with Al in the T1 position resulted in the most framework flexibility and the lowest Ag 0 nanocluster charge, indicating the best result for formation of charge neutral nanoclusters. When water is present, Al in the T3 and T4 positions results in the formation of the smallest average Ag 0 nanoclusters plus greater expansion of the O-T-O bond angle than in vacuum, indicating easier diffusion of the Ag 0 nanoclusters to the surface. Here, the presence of Al in 4-membered rings and in pairs indicates favorable MOR structures for formation of single Ag atoms, despite the existence of synthesis challenges. Therefore, Al in the T2 position is the least favorable for Ag 0 nanocluster formation in both vacuum and in the presence of water. Al in the T1, T3, and T4 positions provides beneficial effects through framework flexibility and changes in nanocluster size or charge that can be leveraged for design of zeolites for formation of metallic nanoclusters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enantioselective catalysts based on metal-organic framework-supported nucleotides

Adenosine triphosphate (ATP) and other nucleotides can be irreversibly bound to the metal-organic framework (MOF) MIL-101(Cr). Analysis of X-ray diffraction data suggests that the location of the adsorbed ATP molecule is in proximity of the Cr 3 clusters. Solid-state NMR and DFT calculations indicate that ATP is bound to MIL-101(Cr) through linkages of the terminal phosphate group with Cr(III) of the framework. In the presence of Cu(II) ions, the MOF-supported nucleotides can function as stable and reusable enantioselective heterogeneous catalysts for reactions like Diels-Alder and Michael addition. In conclusion, compared to the corresponding homogeneous nucleotide-based artificial metalloenzymes (ArMs), the MOF-supported nucleotide-based ArMs exhibit significantly enhanced activity and selectivity in certain cases, demonstrating their potential as a new class of enantioselective heterogeneous catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermophysical properties of FLiBe using moment tensor potentials

Fluoride salts are prospective materials for applications in some next-generation nuclear reactors and their thermophysical properties at various conditions are of interest. Experimental measurement of the properties of these salts is often difficult and, in some cases, unfeasible due to challenges from high temperatures, impurity control, and corrosivity. Therefore, accurate theoretical methods are needed for fluoride salt property prediction. In this work, we used moment tensor potentials (MTP) to approximate the potential energy surface of eutectic FLiBe (66.6% LiF – 33.3% BeF2) predicted by the ab initio (DFT-D3) method. Here, we then used the developed potential and molecular dynamics to obtain several thermophysical properties of FLiBe, including radial distribution functions, density, self-diffusion coefficients, thermal expansion, specific heat capacity, bulk modulus, viscosity, and thermal conductivity. Our results show that the MTP potential approximates the potential energy surface accurately and the overall approach yields very good agreement with experimental values. The converged fitting can be obtained with less than 600 configurations generated from DFT calculations, which data can be generated in just 1200 core hours on today's typical processors. The MTP potential is faster than many machine learning potentials and about one order of magnitude slower than widely used empirical molten salt potentials such as Tosi/Fumi.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Striking stability of a mixed-valence thallium(III)-thallium(I) complex in some solvents

At the dissolution of solid anhydrous thallium(III) trifluoromethanesulfonate, Tl(CF 3 SO 3 ) 3 , or thallium(III) trifluoroacetate, Tl(CF 3 COO) 3 , in dimethylsulfoxide (dmso) or N,N,N’,N’-tetramethylurea (tmu), intensely red-colored complexes are formed. This red thallium complex is stable for years in dmso, while it is reduced fairly rapidly to thallium(I) in tmu with a half-life time of an hour. At the dissolution of Tl(CF 3 SO 3 ) 3 in N,N-dimethylpropyleneurea (dmpu) an immediate reduction to thallium(I) takes place. A stable colorless aqueous thallium(III) solution is obtained at the dissolution in acidic water. Stable dmso solutions and solid dmso solvates of thallium(III) perchlorate, nitrate and trifluormethanesulfonate can be prepared by adding dmso to concentrated acidic aqueous thallium(III) solutions. These experimental observations conclude that the pure solids Tl(CF 3 SO 3 ) 3 and Tl(CF 3 COO) 3 play an essential role in the formation of the red-colored thallium complexes. 205 Tl NMR data show that the red thallium complex contains equal amounts of thallium(III) and thallium(I). The structure of the red thallium complex in dmso, as determined by EXAFS, has Tl–O bond distances of 2.216(3) and 2.80(2) Å, which are in very close agreement with the bond distances obtained in the pure dmso solvates of the thallium(III) and thallium(I) ions, respectively, and a Tl···Tl distance of 3.49(1) Å bridged by oxygen atoms. From the EXAFS data it is impossible to distinguish if dmso molecules and/or trifluoromethanesulfonate ions act as bridges. DFT calculations could eliminate some structures due to the irrelevant structural parameters or the energetics of the proposed reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chromium enhances the mechanical performance of 3d transition metal high entropy alloys

A comprehensive examination of the compositional effects on the deformation behavior of high entropy alloys (HEAs) was conducted through nanoindentation, indentation creep, and stress relaxation experiments at ambient temperature. The alloys investigated included NiCoFe, NiCoCr, NiCoCrFe, and NiCoCrFeMn, all of which underwent identical thermomechanical processing. From the experimental results, NiCoCr exhibited the highest maximum shear stress for dislocation nucleation (13 GPa) and nanoindentation hardness (3.8 GPa) among the alloys tested. It also showed the lowest stress sensitivity (0.02) and activation volume (3–4 b 3 ) under creep and stress relaxation conditions, indicative of its superior plastic flow properties. Density functional theory (DFT) calculations further revealed an uneven charge density and larger bonding-length variation in NiCoCr due to the presence of Cr, which increased lattice distortion, impeding dislocation movement. Furthermore, in this study, post-deformation microscopy using transmission electron microscopy (TEM) revealed a high density of stacking faults and twins in NiCoCr that effectively enhanced its creep strength. The results highlight the significance of specific elemental effects, particularly from Cr in this study, over configurational entropy effect (i.e., compositional complexity) in governing the deformation microstructure and mechanical properties of HEAs. Finally, these insights will be instrumental for the design and optimization of advanced alloys for load-bearing applications.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Direct observation of key aluminum hydroxide prenucleation oligomers for gibbsite nucleation and crystallization in sodium aluminate solution by liquid ToF-SIMS

The mechanism of gibbsite (aluminum hydroxide) crystallization from highly alkaline solutions such as Bayer liquors remains poorly understood, where aluminum (Al) transforms from largely tetrahedrally coordinated aluminate monomers in sodium aluminate solutions into a network of octahedra in gibbsite crystals. A variety of traditional analytical approaches applied to this system do not readily reveal the presence of higher-order oligomeric intermediates. To overcome this limitation, we employed in-situ liquid Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) to examine the Al species present in concentrated sodium aluminate solutions favoring crystallization of gibbsite or sodium aluminate. A complex mixture of Al oligomers was found. By comparing the change in the relative concentration of Al oligomers with +1 and -1 charge, we were able to identify three major Al oligomer candidates, iso-tetramers, iso-pentamers, and cyclic-hexamers, for the nucleation and crystallization of gibbsite. The concentrations of iso-tetramers and iso-pentamers significantly surpass those of cyclic-hexamers. Time-dependent in-situ Raman spectroscopy analysis indicated that the appearance of gibbsite coincided with the peak concentration of these oligomers. The Density-functional theory (DFT) calculation suggests that the formation of iso-oligomers is more favorable than that of cyclic-hexamers. The combined results suggest that iso-tetramers and iso-pentamers play the most substantial role in the nucleation and growth of gibbsite in the sodium aluminate solutions. Our findings also suggest that the oligomers that promote gibbsite crystallization are more stable in dilute sodium aluminate solutions, making these solutions particularly suitable for efficient gibbsite crystallization. In conclusion, our study fills a major knowledge gap in understanding Al speciation that leads to the nucleation and crystallization of gibbsite in concentrated sodium aluminate solutions.

Bayer liquor↗
DOE OSTI2022

Atomically sharp jagged edges of chemical vapor deposition-grown WS 2 for electrocatalysis

Chemical vapor deposition (CVD)-grown 2D transition metal dichalcogenides can adopt faceted edges. To investigate how sharp these sites can be, we utilize aberration-corrected annular dark-field scanning transmission electron microscopy (ADF-STEM) to resolve the atomic structure of two-dimensional (2D) WS 2 domains that show jagged edges. Nanoscale triangular edge structures with S zigzag terminations are observed. Both the peak and valley regions exhibit near-atomic sharpness. The peaks are as sharp as two atoms in width. Highly ordered valley sites display a minimum width of three atoms, and prospective single-atom valleys appear as two-atom-wide sites in the ADF-STEM contrast. Regarding the kinetics, density-functional theory (DFT) calculations indicate that the 2-W-atom peak would not evolve into a single-W-atom peak even though the latter configuration is also stable with a high enough binding energy under the growth conditions. These results help deepen our understanding of the possible structuring at the nanoscale and the atomic-scale limits of peaks and valleys formed via intersection of two zigzag edges. The enriched edge sites lead to higher catalytic activities for the hydrogen evolution reaction (HER).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Defective Sn-Zn perovskites through bio-directed routes for modulating CO 2 RR

Sn and Zn oxides can catalyze electrochemical CO 2 reduction reactions (CO 2 RR) to produce useful chemicals. Herein, we report on perovskite-type tin-zinc oxides (TZO) synthesized by a biomineralization approach under benign aqueous conditions. The resulting TZO catalysts are disordered and possess a high quantity of defects, which serve as highly reactive active sites in CO 2 RR. Selectively toward formate or CO is tunable toward the relative amounts of Sn and Zn and their associated O defects. In-situ X-ray absorption spectroscopy measurements reveal electronic and structural transformations consistent with oxygen vacancy formation at Sn-O-Zn bridges as a function of cathodic potential that strongly correlates to CO2RR selectivity. Further, Density functional theory (DFT) calculations demonstrate that introducing an oxygen vacancy in TZO influences drastically influences formate/CO selectivity, consistent with our in-situ XAS findings and catalytic performance. Overall, these findings demonstrate the potential of biomineralization to fabricate perovskite-type metal oxides for energy conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrochemical dynamics of imidazolium ionic liquids at graphene electrodes for energy storage applications

Electric double layer capacitors (EDLCs) are prominent energy storage systems that constitute the foundation of more reliable and sustainable energy infrastructures. Modern EDLCs often incorporate ionic liquids (ILs) as a key component in their electrolytes, leveraging the high electrochemical stability of ILs to enhance device performance. The performance and functionality of these capacitors also hinge on the interfacial behavior of ILs at electrode surfaces, which remain insufficiently understood. Here, we performed synchrotron infrared nanospectroscopy (SINS) in combination with density functional theory (DFT) calculations to investigate the electric double layers (EDLs) of three imidazolium-based ILs in a custom-designed graphene liquid cell. This approach revealed new insights into the dynamics of IL EDLs and the underpinning factors originating from the IL structures. Variations in anion size and structure were found to tune the ILs’ ability to form EDLs with compact and closely-correlated ion arrangements, which are critical for enhancing their capacitive performance. These findings highlight the intricate interactions between ions governed by their structures and charge behaviors, which underscores the opportunities for targeted design of IL-based electrolytes to optimize EDLC functionality.

Electric double layers↗