Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

S-matrix calculation of the triple-alpha reaction

An S-matrix formalism is developed which can be applied to reactions in which electron screening is important, including three-body reactions and reactions involving weak interactions. The various regimes of the triple-alpha reactions are systematically discussed, and a new nonresonant regime at high densities is identified. Using the S-matrix formalism, an analytic expression is obtained for the screened triple-alpha reactions which is accurate for all temperatures and densities. The results are compared with those of Cameron (1959) and Nomoto et al. (1985), and the latter's expression for the unscreened reaction rate is verified. However, it is shown that the reaction rate in the pycnonuclear regime cannot be obtained from the unscreened rate using a screening factor, and that the results of Nomoto et al. therefore cannot be used in this regime.

Fushiki, Ikko↗
NASA NTRS2010

Microscopic Scale Simulation of the Ablation of Fibrous Materials

Ablation by oxidation of carbon-fiber preforms impregnated in carbonized phenolic matrix is modeled at microscopic scale. Direct numerical simulations show that the carbonized phenolic matrix ablates in volume leaving the carbon fibers exposed. This is due to the fact that the reactivity of carbonized phenolic is higher than the reactivity of carbon fibers. After the matrix is depleted, the fibers ablate showing progressive reduction of their diameter. The overall material recession occurs when the fibers are consumed. Two materials with the same carbon-fiber preform, density and chemical composition, but with different matrix distributions are studied. These studies show that at moderate temperatures (< 1000 K) the microstructure of the material influences its recession rate; a fact that is not captured by current models that are based on chemical composition only. Surprisingly, the response of these impregnated-fiber materials is weakly dependent on the microstructure at very high temperatures (e.g., Stardust peak heating conditions: 3360K).

Lachaud, Jean Romain↗
NASA NTRS2010

Microscopic Scale Simulation of the Ablation of Fibrous Materials

This slide presentation reviews the ablation by oxidation of carbon-fiber preforms impregnated in carbonized phenolic-formaldehyde matrix is modeled at microscopic scale. Direct numerical simulations show that the matrix ablates in volume leaving the carbon fibers exposed. This is due to the fact that the reactivity of carbonized phenolics is higher than the reactivity of carbon fibers. After the matrix is depleted, the fibers ablate showing progressive reduction of their diameter. The overall material recession occurs when the fibers are consumed. Two materials with the same carbon-fiber preform, density and chemical composition, but with different matrix distributions are studied. These studies show that at moderate temperatures (< 1000K) the microstructure of the material influences its recession rate; a fact that is not captured by current models that are based on chemical composition only. Surprisingly, the response of these impregnated-fiber materials is weakly dependent on the microstructure at very high temperatures (e.g., Stardust peak heating conditions: 3360K).

Lachaud, Jean↗
DOE OSTI2026

Tensor-polarized parton density in the 𝑁 → Δ transition from the large-𝑁 𝑐 light-cone wave function

The tensor-polarized parton density is defined by the forward matrix element of a partonic operator in the 𝑁 → Δ transition. In this work, we investigate it by employing the large-𝑁 𝑐 light-cone wave function derived from the mean-field approach. The mean-field picture is based on low-energy effective dynamics in the large-𝑁 𝑐 limit, where the baryon wave function is formulated in the rest frame. By exploiting the covariance of the mean-field solution, we derive the corresponding large-𝑁 𝑐 light-cone wave function—decomposed unambiguously into 3⁢𝑄 , 5⁢𝑄 , 7⁢𝑄 , and higher Fock components—in the infinite momentum frame. Evaluating the overlap of these wave functions, we derive an overlap representation of the tensor-polarized parton density in the 𝑁 → Δ transition and find that the leading contribution arises from the 5⁢𝑄 Fock sector. This indicates that the tensor-polarized parton density directly probes the genuine 5⁢𝑄 component and is governed by chiral dynamics. Our numerical analysis shows that the 𝑁 → Δ tensor-polarized parton density is suppressed, consistent with standard large-𝑁 𝑐 expectations. Finally, we establish connections among the tensor-polarized parton density, the generalized parton distribution 𝐻 𝑋 , and the energy-momentum tensor form factor 𝐹 4 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Radiative and Nonradiative Recombinations in Organic Radical Emitters: The Effect of Guest–Host Interactions

Radical-carrying organic molecules have received significant attention to bypass the issue related to harvesting triplet excitons in current light-emitting materials. While the computational efforts conducted so far have treated these radical emitters as isolated entities, in actual devices, they are embedded in a host matrix and subject to emitter–host interactions. In this study, by combining molecular dynamics simulations and density functional theory calculations, the impact of the host matrix on the optoelectronic performance of radical emitters is evaluated, taking as a representative example the (4-ncarbazolyl-2,6-dichlorophenyl)bis(2,4,6-trichlorophenyl)-methyl (TTM-3NCz) radical emitter dispersed in a 4,4-bis(carbazol-9-yl)biphenyl (CBP) host. A morphological analysis shows that steric effects around the radical centers, carried by the TTM electron-poor moieties of the emitters, disfavor π–π interactions with the host molecules, which leads to random intermolecular orientations around the TTM moieties. The 3NCz electron-rich moieties of the emitters, however, have much lesser spatial hindrance for intermolecular π–π stacking, which modulates the structural and electronic properties of the emitters in the host matrix. The influence of dynamic and static disorders on the radiative and nonradiative recombination processes is also investigated and it is found that the rates of nonradiative recombination are small, which opens the way to 100% internal quantum efficiency for the doublet-based emission process.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Virasoro minimal string

We introduce a critical string theory in two dimensions and demonstrate that this theory, viewed as two-dimensional quantum gravity on the worldsheet, is equivalent to a double-scaled matrix integral. The worldsheet theory consists of Liouville CFT with central charge c ≥ ≥ 25 coupled to timelike Liouville CFT with central charge 26-c. The double-scaled matrix integral has as its leading density of states the universal Cardy density of primaries in a two-dimensional CFT, thus motivating the name Virasoro minimal string. The duality holds for any value of the continuous parameter c c and reduces to the JT gravity/matrix integral duality in the large central charge limit. It thus provides a precise stringy realization of JT gravity. The main observables of the Virasoro minimal string are quantum analogues of the Weil-Petersson volumes, which are computed as absolutely convergent integrals of worldsheet CFT correlators over the moduli space of Riemann surfaces. By exploiting a relation of the Virasoro minimal string to three-dimensional gravity and intersection theory on the moduli space of Riemann surfaces, we are able to give a direct derivation of the duality. We provide many checks, such as explicit numerical - and in special cases, analytic - integration of string diagrams, the identification of the CFT boundary conditions with asymptotic boundaries of the two-dimensional spacetime, and the matching between the leading non-perturbative corrections of the worldsheet theory and the matrix integral. As a byproduct, we discover natural conformal boundary conditions for timelike Liouville CFT.

Physics↗
DOE OSTI2025

Structure and Sulfur: Tuning the Viscoelastic and Surface Properties of Natural Keratin Fibers

Natural keratin fibers, such as wool, possess a complex hierarchical structure that governs their mechanical properties and surface energy. However, the extent to which these characteristics are influenced by combined contributions of structural variations (e.g., fiber diameter, intermediate filament (IF) packing) and chemical composition (e.g., disulfide bond density) remains poorly understood. In this study, we investigate wool fibers from five sheep breeds (Merino, Polwarth, Cheviot, Eider, and Devon) to elucidate how these factors influence viscoelasticity and surface interactions. Using a multimodal approach integrating interfacial and bulk characterization methods, including inverse gas chromatography (IGC), atomic force microscopy-infrared spectroscopy (AFM-IR), X-ray photoelectron spectroscopy (XPS), uniaxial tensile testing, and synchrotron small-angle X-ray scattering (SAXS), we show that the nanometer-thick 18-methyleicosanoic acid (18-MEA) layer is consistently present across all wool types and plays a key role in governing hydrophobicity and surface heterogeneity. A controlled isothermal treatment at 200 °C, designed to cleave disulfide bonds, results in a nearly 40% reduction in specific surface area across all fiber types, accompanied by a significant decrease in tensile strength and 80% reduction in elongation at break for Merino and Devon wool, but limited influence on the mechanical properties of Eider fibers. Furthermore, rate-dependent tensile testing within the elastic regime reveals distinct viscoelastic responses among the fiber types, suggesting that the sulfur-rich protein matrix surrounding IFs and its structure contribute actively to stress partitioning. Altogether, when combined with conclusions from SAXS measurements of IF spacing, our work offers compelling insights into the role of the keratin-associated protein (KAP) matrix in shaping wool fiber mechanics. Differences in mechanical behavior among wool types, despite similar IF spacing or sulfur content, highlight the importance of matrix composition and cross-linking density, suggesting that the molecular architecture of the KAP network may be a dominant factor in determining fiber performance.

X-ray scattering↗
NASA NTRS1988

Continuous fiber ceramic matrix composites for heat engine components

High strength at elevated temperatures, low density, resistance to wear, and abundance of nonstrategic raw materials make structural ceramics attractive for advanced heat engine applications. Unfortunately, ceramics have a low fracture toughness and fail catastrophically because of overload, impact, and contact stresses. Ceramic matrix composites provide the means to achieve improved fracture toughness while retaining desirable characteristics, such as high strength and low density. Materials scientists and engineers are trying to develop the ideal fibers and matrices to achieve the optimum ceramic matrix composite properties. A need exists for the development of failure models for the design of ceramic matrix composite heat engine components. Phenomenological failure models are currently the most frequently used in industry, but they are deterministic and do not adequately describe ceramic matrix composite behavior. Semi-empirical models were proposed, which relate the failure of notched composite laminates to the stress a characteristic distance away from the notch. Shear lag models describe composite failure modes at the micromechanics level. The enhanced matrix cracking stress occurs at the same applied stress level predicted by the two models of steady state cracking. Finally, statistical models take into consideration the distribution in composite failure strength. The intent is to develop these models into computer algorithms for the failure analysis of ceramic matrix composites under monotonically increasing loads. The algorithms will be included in a postprocessor to general purpose finite element programs.

Tripp, David E.↗
DOE OSTI2020

Microscopic calculations of nuclear level densities with the Lanczos method

A new method for computing the density of states in nuclei making use of an extrapolated form of the tridiagonal matrix obtained from the Lanczos method is presented. It will be shown that the global, average properties of the entire Lanczos matrix can be predicted from just four Lanczos iterations. The extrapolated Lanczos matrix (ELM) approach provides for an accurate computation of the density of states described within the configuration space, which, in some cases, is sufficient to accurately calculate the density of states at, or near, the neutron separation energy. Comparisons between theory and experiment are shown for $^{57}Fe$, $^{74}Ge$, and $^6Ge$. In addition, we show results for the J -dependence of moments and the level density for these three nuclei.

Shell model↗
DOE OSTI2021

Dynamics of disordered mechanical systems with large connectivity, free probability theory, and quasi-Hermitian random matrices

Disordered mechanical systems with high connectivity represent a limit opposite to the more familiar case of disordered crystals. Individual ions in a crystal are subjected essentially to nearest-neighbor interactions. In contrast, the systems studied in this paper have all their degrees of freedom coupled to each other. Thus, the problem of linearized small oscillations of such systems involves two full positive-definite and non-commuting matrices, as opposed to the sparse matrices associated with disordered crystals. Consequently, the familiar methods for determining the averaged vibrational spectra of disordered crystals, introduced many years ago by Dyson and Schmidt, are inapplicable for highly connected disordered systems. In this paper we apply random matrix theory (RMT) to calculate the averaged vibrational spectra of such systems, in the limit of infinitely large system size. At the heart of our analysis lies a calculation of the average spectrum of the product of two positive definite random matrices by means of free probability theory techniques. We also show that this problem is intimately related with quasi-hermitian random matrix theory (QHRMT), which means that the ‘hamiltonian’ matrix is hermitian with respect to a non-trivial metric. This extends ordinary hermitian matrices, for which the metric is simply the unit matrix. The analytical results we obtain for the spectrum agree well with our numerical results. The latter also exhibit oscillations at the high-frequency band edge, which fit well the Airy kernel pattern. We also compute inverse participation ratios of the corresponding amplitude eigenvectors and demonstrate that they are all extended, in contrast with conventional disordered crystals. Finally, we compute the thermodynamic properties of the system from its spectrum of vibrations. In addition to matrix model analysis, we also study the vibrational spectra of various multi-segmented disordered pendula, as concrete realizations of highly connected mechanical systems. A universal feature of the density of vibration modes, common to both pendula and the matrix model, is that it tends to a non-zero constant at vanishing frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Energy efficient photonic memory based on electrically programmable embedded III-V/Si memristors: switches and filters

Abstract Over the past few years, extensive work on optical neural networks has been investigated in hopes of achieving orders of magnitude improvement in energy efficiency and compute density via all-optical matrix-vector multiplication. However, these solutions are limited by a lack of high-speed power power-efficient phase tuners, on-chip non-volatile memory, and a proper material platform that can heterogeneously integrate all the necessary components needed onto a single chip. We address these issues by demonstrating embedded multi-layer HfO 2 /Al 2 O 3 memristors with III-V/Si photonics which facilitate non-volatile optical functionality for a variety of devices such as Mach-Zehnder Interferometers, and (de-)interleaver filters. The Mach-Zehnder optical memristor exhibits non-volatile optical phase shifts > π with ~33 dB signal extinction while consuming 0 electrical power consumption. We demonstrate 6 non-volatile states each capable of 4 Gbps modulation. (De-) interleaver filters were demonstrated to exhibit memristive non-volatile passband transformation with full set/reset states. Time duration tests were performed on all devices and indicated non-volatility up to 24 hours and beyond. We demonstrate non-volatile III-V/Si optical memristors with large electric-field driven phase shifts and reconfigurable filters with true 0 static power consumption. As a result, co-integrated photonic memristors offer a pathway for in-memory optical computing and large-scale non-volatile photonic circuits.

Cheung, Stanley (ORCID:0000000248860013)↗
DOE OSTI2021

Characterisation of nano-assemblies inside mesopores using neutron scattering

Adsorption of molecular and nanoscale matter in mesoporous materials is important in filtration and chromatography as well as membrane processes. However, the morphology and distribution of self-assembled structures of adsorbate formed within nanoconfined environments is largely unknown. Small Angle Neutron Scattering (SANS) with porous matrix matching the neutron scattering length density of the solvent has the potential to provide detailed information on the self-assemblies formed in pore spaces. However, analysis of such SANS profiles remains a challenge. In this study, we extend the SANS analysis method previously developed by Findenegg and co-workers to include interparticle correlations, providing a qualitative characterisation of the adsorption state of surfactants and nanoparticles in the cylindrical pores of silica nanomaterials. We find that the pore filling fraction and the self-assembled state of the adsorbate governs the scattering profile. We apply the model to two materials namely, triethyleneglycol monohexyl ether (C 6 E 3 ) surfactant and gold nanoparticles adsorbed in SBA-15 mesoporous silica. In contrast to the C 6 E 3 system, Bragg scattering dominates the diffuse scattering in gold nanoparticle system, which we attribute to the immobile internal structure of the nanoparticles. In conclusion, this new SANS analysis method has potential to elucidate structures of soft matter nanoassemblies inside mesopores.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Theory for transport in magnetized plasmas

We present a two fluid model for anomalous thermal, particle and momentum transport which has been derived from kinetic theory using a small parameter ε~10-2. This small parameter can come from either the ratio of wave frequency to cyclotron frequency or the ratio of potential to thermal energies. This fluid model is strongly nonlinear and has an exact closure within the accuracy ε. It can be used to simulate the full radius of a tokamak including internal and edge transport barriers at the same time without introducing any local assumptions for physics model or grid size. It involves a full transport matrix, thus giving possibility for both density and heat pinches. The model can be derived from the Vlasov equation, adding also close collisions and includes particle pinches of the type found in the magnetosphere and in the Massachusetts Institute of Technology elevated dipole machine. Pinches are also in agreement for the heat pinch experiments on Doublet III D including simultaneous particle and heat pinches. For tokamaks it gives the right scaling of confinement time versus heating power. Finally, we have also recovered the Turbulent Equipartition result that the density scales as inverse safety factor q in typical simulations. Thus this model is both fundamental and of high practical use.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Method for estimating the density of high-level nuclear waste glass

A database of over 1100 silicate glass compositions and densities was compiled and used to evaluate the efficacy of an algorithm for estimating the density of silicate glass compositions. We sought to develop a parsimonious algorithm based on the additivity of partial molar volumes of individual oxide components weighted by their mole fraction in a glass composition. Bound molar volumes were used for oxides in which the density of the oxide bound in a glass matrix was previously determined. The bound molar volumes were known for oxides covering 97.5 mole percent of the database compositional space. The measured glass densities were plotted against the estimated glass densities and a linear regression yielded an R 2 adj. = 0.95 and a slope and intercept of approximately one and zero, respectively. This regression suggests that glass densities estimated by the algorithm, within analysis uncertainty, are equal to the measured densities of the glasses. In addition to the development of the density estimation, we corroborated many of the referenced bound molar volume data used in the parameterization of the estimation algorithm via linear regression of the individual partial molar volumes versus the inverse measured densities (specific volumes) of the glasses in the database.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1971

Inelastic transition densities

Inelastic scattering transition densities in single particle operator reduced matrix elements between initial and final nuclear states for nucleon angular momentum calculations

Braley, R. C.↗
NASA NTRS1980

Trophic classification of Tennessee Valley area reservoirs derived from LANDSAT multispectral scanner data

LANDSAT MSS data from four different dates were extracted from computer tapes using a semiautomated digital data handling and analysis system. Reservoirs were extracted from the surrounding land matrix by using a Band 7 density level slice of 3; and descriptive statistics to include mean, variance, and ratio between bands for each of the four bands were calculated. Significant correlations ( 0.80) were identified between the MSS statistics and many trophic indicators from ground truth water quality data collected at 35 reservoirs in the greater Tennessee Valley region. Regression models were developed which gave significant estimates of each reservoir's trophic state as defined by its trophic state index and explained in all four LANDSAT frames at least 85 percent of the variability in the data. To illustrate the spatial variations within reservoirs as well as the relative variations between reservoirs, a table look up elliptical classification was used in conjunction with each reservoir's trophic state index to classify each reservoir on a pixel by pixel basis and produce color coded thematic representations.

Meinert, D. L.↗
NASA NTRS1988

Feedforward, high density, programmable read only neural network based memory system

Neural network-inspired, nonvolatile, programmable associative memory using thin-film technology is demonstrated. The details of the architecture, which uses programmable resistive connection matrices in synaptic arrays and current summing and thresholding amplifiers as neurons, are described. Several synapse configurations for a high-density array of a binary connection matrix are also described. Test circuits are evaluated for operational feasibility and to demonstrate the speed of the read operation. The results are discussed to highlight the potential for a read data rate exceeding 10 megabits/sec.

Daud, Taher↗