Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Modeling of Micro-Hardness in the Au-Doped YBCO Bulk Superconductors

In this study, in order to investigate the effect of Au doping on mechanical properties of YBCO, Au-doped (from x = 1 wt% to x = 20 wt%) and pure YBa{sub 2}Cu{sub 3}O{sub 7-x} samples were prepared by standard solid-state reaction method. The indentation load versus diagonal length of the samples under various indentation loads in the range of 0.245–2.940 N is measured. The micro-indentation measurements showed that the load-dependent micro-hardness value for Au-doped samples is lower in comparison with that of the pure sample. The values of the hardness are found to be load and Au content-dependent. For each sample, the reverse indentation size effect (RISE) is observed in which micro-hardness value increased with increasing the load. In addition, we extract the load-independent (true) micro-hardness using Meyer’s law, Kick’s law, proportional specimen resistance, modified proportional specimen resistance, the Hays-Kendall, and the indentation-induced cracking (IIC) models and compare the true hardness with the apparent hardness. Among the investigated models, IIC model is determined to be the most successful one describing the mechanical properties of our samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant dielectric constant response of the composites in ternary system CuO-TiO{sub 2}-CaO

The subsolidus phase relations of the ternary system CuO-TiO{sub 2}-CaO sintered at 950 deg. C in air have been determined by powder X-ray diffraction method. Only one ternary compound CaCu{sub 3}Ti{sub 4}O{sub 12} was found in this system. From room-temperature dielectric property mapping at 10 kHz, a giant dielectric constant (epsilon{sub r}>10{sup 4}) was observed for most of the ceramic composites in the CuO-rich region and in the region along the CaO-CuO binary line. The composites in the CaCu{sub 3}Ti{sub 4}O{sub 12}-rich region were found to give a comparable giant dielectric constant when sintered at 1050 deg. C. The particular microstructure of larger grains with predominant phase surrounded by smaller grains with the secondary phases was found in such composites with a high dielectric constant. The relations between structures and dielectric properties were investigated. An internal barrier layer capacitance effect is the most probable mechanism to explain this particular dielectric behavior. - Graphical Abstract: In the ternary system, CuO-TiO{sub 2}-CaO, a giant dielectric constant (epsilon{sub r}) above 10{sup 4} (red color) was observed in most of the composites sintered at only 950 deg. C in the CuO-rich region. Dashed lines show the phase boundaries.

36 MATERIALS SCIENCE↗

Etch Products of Copper Atomic Layer Etching by Oxidation and Formic Acid Vapor

Atomic layer etching (ALE) of metals offers a path to greater control of selectivity, etch rate, and etch profile. However, tailoring a process to meet these demands requires an understanding of the volatile etch product, which is challenging to detect due to low product concentrations and the paramagnetism of many metalorganic products. Here, in this work, several complementary analysis techniques were used to determine the volatile etch product and residual surface species of a Cu ALE process based on plasma oxidation and formic acid vapor etching of the oxidized layer. It was shown that the volatile product was copper formate with a Cu 2+ paramagnetic center, in concordance with prior density functional theory (DFT) calculations. While copper formate tetrahydrate was formed, it was determined that the tetrahydrate product was confined to the surface, with anhydrous copper formate being the volatile etch product.

Smith, Taylor G. [Univ. of California, Los Angeles↗

Ubiquitous long-range antiferromagnetic coupling across the interface between superconducting and ferromagnetic oxides

The so-called proximity effect is the manifestation, across an interface, of the systematic competition between magnetic order and superconductivity. This phenomenon has been well documented and understood for conventional superconductors coupled with metallic ferromagnets; however it is still less known for oxide materials, where much higher critical temperatures are offered by copper oxide-based superconductors. In this paper, we show that, even in the absence of direct Cu–O–Mn covalent bonding, the interfacial CuO 2 planes of superconducting La 1.85 Sr 0.15 CuO 4 thin films develop weak ferromagnetism associated to the charge transfer of spin-polarised electrons from the La 0.66 Sr 0.33 MnO 3 ferromagnet. Theoretical modelling confirms that this effect is general to all cuprate/manganite heterostructures and the presence of direct bonding only affects the strength of the coupling. Finally, the Dzyaloshinskii–Moriya interaction, also at the origin of the weak ferromagnetism of bulk cuprates, propagates the magnetisation from the interface CuO 2 planes into the superconductor, eventually depressing its critical temperature.

36 MATERIALS SCIENCE↗

Numerical analysis of ac loss in bifilar stacks and coils of ion beam assisted deposition YBCO coated conductors

In this paper we present a finite element model using the commercial COMSOL software package for calculating the ac loss in bifilar stacks of high temperature superconducting tape. In the model, the current-voltage relationship characterizing the superconducting properties is assumed to follow a power law. The calculations were performed for infinite bifilar stacks with different values of layer-to-layer separation D. With appropriate settings for the boundary conditions, the numerical results agree well with the analytical data obtained from a recently proposed model [J. R. Clem, Phys. Rev. B 77, 134506 (2008)]. The numerical approach was also used to investigate the end effects in a bifilar stack to answer the following question: how many layers away from the end of a stack are required before the environment of a given layer is identical to that in an infinite stack? We find that the answer to this question depends strongly on the value of D. Based on this study, a model for calculating the ac loss in bifilar noninductively wound coils with a finite number of turns is proposed.

36 MATERIALS SCIENCE↗

Much simplified ion-beam assisted deposition-TiN template for high-performance coated conductors

A much simplified template, i.e., two nonsuperconducting layers between the superconducting YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO) and the polycrystalline metal substrate, has been developed for high-performance coated conductors by using biaxially aligned TiN as a seed layer. A combination of a thin TiN ({approx}10 nm by ion-beam assisted deposition) layer and an epitaxial buffer LaMnO{sub 3} layer ({approx}120 nm) allows us to grow epitaxial YBCO films with values of full width at half-maximum around 3.5 deg. and 1.7 deg. for the {phi}-scan of (103) and rocking curve of (005) YBCO, respectively. The YBCO films grown on electropolished polycrystalline Hastelloy using this two-layer template exhibited a superconducting transition temperature of 89.5 K, a critical current density of 1.2 MA/cm{sup 2} at 75.5 K, and an {alpha} value (proportional factor of critical current density J{sub c}{approx}H{sup -}{alpha}) of around 0.33, indicating a high density of pinning centers and an absence of weak links.

36 MATERIALS SCIENCE↗

Connection stiffness and dynamical docking process of flux pinned spacecraft modules

This paper describes a novel kind of potential flux pinned docking system that consists of guidance navigation and control system, the traditional extrusion type propulsion system, and a flux pinned docking interface. Because of characteristics of passive stability of flux pinning, the docking control strategy of flux pinned docking system only needs a series of sequential control rather than necessary active feedback control, as well as avoidance of hazardous collision accident. The flux pinned force between YBaCuO (YBCO) high temperature superconductor bulk and permanent magnet is able to be given vent based on the identical current loop model and improved image dipole model, which can be validated experimentally. Thus, the connection stiffness between two flux pinned spacecraft modules can be calculated based on Hooke's law. This connection stiffness matrix at the equilibrium position has the positive definite performance, which can validate the passively stable connection of two flux pinned spacecraft modules theoretically. Furthermore, the relative orbital dynamical equation of two flux pinned spacecraft modules can be established based on Clohessy-Wiltshire's equations and improved image dipole model. The dynamical docking process between two flux pinned spacecraft modules can be obtained by way of numerical simulation, which suggests the feasibility of flux pinned docking system.

42 ENGINEERING↗

Detection of diffusion limited oxidation in thermally aged ethylene propylene rubber cable insulation material

The lifetime prediction of electrical cable insulation in nuclear power plants (NPPs) is primarily based on accelerated aging. Polymeric insulation exposed to accelerated aging at high temperatures may demonstrate diffusion limited oxidation (DLO) where oxygen within the material is consumed faster than can be supplied by diffusion from the surrounding air. This situation leads to equilibrium oxidation at the exposed surfaces and limited oxidation away from the surfaces. Therefore, DLO results in a heterogeneously aged material which can lead to underestimation of lifetime for in-service cable insulation. In this study, the presence of inhomogeneous aging caused by DLO was evaluated on cross-sectioned cable insulation specimens made of ethylene propylene rubber (EPR). The studies were performed on thermally aged specimens (165 °C, 1 day and 165 °C, 16 days) using local measurement techniques including nanoindentation, micro-Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) - energy dispersive spectroscopy (EDS). All the results indicate some degree of heterogenous aging, with 165 °C, 16 days, aging demonstrating highest degree of oxidative degradation on the inside edges presumably caused due to copper catalyzed oxidation.

Pallaka, Madhusudhan Reddy↗

The Effect of γ Irradiation on Phase Transitions in the Polyimide–YBa{sub 2}Cu{sub 3}O{sub 6+} {sub x} System

The effect of γ irradiation on optical properties of films of the polyimide–YBa{sub 2}Cu{sub 3}O{sub 6.7} system with different concentrations of the filler in the form of the finely crystalline compound YBa{sub 2}Cu{sub 3}O{sub 6.7} (0.05 wt %, 0.10 wt %, and 0.50 wt %) has been investigated. The properties were studied on an IKS-29 infrared spectrophotometer in a spectral range of 400–4200 cm{sup –1} at room temperature. The samples were irradiated in air under room conditions on an RKhM-γ-20 by doses of 150, 250, and 600 kGy. The power of the exposure dose of the {sup 60}Co source was 0.16 rad/s. It has been established that irradiation with a dose of up to 600 kGy of the abovementioned system slightly affects the structure of the polyimide matrix but decreases the number of free radical groups in the film structure with the formation of hydrogen bonds. In the range of 400–4200 cm{sup –1} at D = 150 kGy, the most intense changes in spectra of polymeric composite samples have been revealed. In the range of 2850–3350 cm{sup –1}, the wide absorption spectrum band is preserved, which is caused by the presence of Cu, Y, and Ba crystallohydrates. The band is related to deformation vibrations of the Cu–O bond in YBa{sub 2}- Cu{sub 3}O{sub 6.7} (YBCO) chains due to properties of barium carbonate, formation of oxygen vacancies in the filler, and vibrations of the Cu(I)–O(I) bonds near one or several O(4) vacancies. Irradiation by doses of 250 and 600 kGy for different concentrations of the filler leads to a decrease in the signal intensity in the range of 1800–3600 cm{sup –1} by 20–35% on average. Peaks related to interband transitions (transitions of the Cu(I)–Cu(IY)–Cu(II) system) and bending vibrations O(I)–Cu(I) are not changed by strains of O(IY)–Cu(I) bonds. This testifies to the radiation-stimulated diffusion of oxygen atoms to O(IY) sites determining the orthorhombic phase of YBa{sub 2}Cu{sub 3}O{sub 6.7} from the occupied positions in the Cu–O sublattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Characterization of YBa 2 Cu 4 O 8 Superconductor

Solid-state reaction of appropriate amounts of Y 2 O 3 , BaCOs, and CuO for 2 h at 800°C in flowing oxygen with a total pressure of 2.7 x 10 2 Pa (2 mm Hg), followed by cooling and annealing at 750°C for 10 h in oxygen at ambient pressure, has produced orthorhombic YBa 2 Cu 4 O 8 (124) as the main phase with YBa 2 Cu 3 O x (123) as an impurity phase. After the as-calcined powder was annealed in oxygen at 800°C for 24 h under ambient pressure, the phase purity improved considerably. Calcined 124 powder was pressed into pellets and rapidly annealed at temperatures from 870°C to 935°C. At these temperatures, the 124 decomposed into 123. The superconducting transition temperature, T c , of the annealed samples depended upon the annealing temperature and atmosphere. The decomposed samples have been characterized by low field RF SQUID magnetometer and high resolution transmission electron microscopy.

36 MATERIALS SCIENCE↗

Large-Scale and Galvanic Replacement Free Synthesis of Cu@Ag Core–Shell Nanowires for Flexible Electronics

Copper nanowires (CuNWs) are considered a promising alternative to indium tin oxide (ITO) due to their high transparency, conductivity and low cost. However, the susceptibility to oxidation of copper in ambient conditions largely overshadows their practical applications. Here, a facile adsorption and subsequent heat-treatment method is developed to obtain uniform Cu@Ag core-shell nanowires. Ag-ammonia complex (Ag[(NH2R)2]+) as silver source adsorbs on the surface of CuNWs to form Cu@Ag-ammonia core-shell precursors and then decomposes to pure Ag shell through a simple thermal annealing process under air. The thickness of Ag shell can easily be controlled by adjusting the concentration of Ag-ammonia. The Ag shell perfectly prevents the oxidation of CuNWs, enabling the core-shell nanowires to maintain stability at high temperature (140 °C) and high humidity (85 °C, 85% RH) for at least 500 h. More importantly, transparent conductive films made from our Cu@Ag nanowires hold comparable optical and electrical properties to pure CuNWs. The large-scale and facile strategy demonstrated in this study offers huge potential to further explore the applications of CuNWs in flexible and stretchable electronic and optoelectronic devices.

Zhang, Bowen (ORCID:000000030432745X)↗

One-step green synthesis of cuprous oxide crystals with truncated octahedra shapes via a high pressure flux approach

Cuprous oxide (Cu{sub 2}O) was synthesized via reactions between cupric oxide (CuO) and copper metal (Cu) at a low temperature of 300 deg. C. This progress is green, environmentally friendly and energy efficient. Cu{sub 2}O crystals with truncated octahedra morphology were grown under high pressure using sodium hydroxide (NaOH) and potassium hydroxide (KOH) with a molar ratio of 1:1 as a flux. The growth mechanism of Cu{sub 2}O polyhedral microcrystals are proposed and discussed. - Graphical Abstract: The Cu{sub 2}O crystals with truncated octahedral shape were one-step synthesized in high yield via high pressure flux method for the first time, which is green and environmentally friendly. The mechanisms of synthesis and crystal growth were discussed in this paper. Highlights: > Cuprous oxide was one-step green synthesized by high pressure flux method. > The approach was based on the reverse dismutation reactions between cupric oxide and copper metal. > This progress is green, environmentally friendly and energy efficient. > The synthesized Cu2O crystals were of truncated octahedra morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ oxidation studies on /001/ copper-nickel alloy thin films

High-resolution transmission electron microscopy studies are reported of (001)-oriented single crystalline thin films of Cu-3%Ni, Cu-4.6%Ni, and Cu-50%Ni alloy which were prepared by vapor deposition onto (001) NaCl substrates and subsequently annealed at around 1100 K and oxidized at 725 K at low oxygen partial pressure. At all alloy concentrations, Cu2O and NiO nucleated and grew independently without the formation of mixed oxides. The shape and growth rates of Cu2O nuclei were similar to rates found earlier. For low-nickel alloy concentrations, the NiO nuclei were larger and the number density of NiO was less than that of Cu-50%Ni films for which the shape and growth rates of NiO were identical to those for pure nickel films. Phenomena involving a reduced induction period, surface precipitation, and through-thickness growth are also described. The results are consistent with previously established oxidation mechanisms for pure copper and pure nickel films.

Heinemann, K.↗

Preparation of Cu-doped nickel oxide thin films and their properties

Copper doped Nickel oxide film was preferred on glass substrate by simple nebulizer technique keeping the substrate temperature at 350°C and characterized by X-ray diffraction (XRD), Photoluminescence (PL) and Four probe resistivity measurements. XRD studies indicated cubic structure and the crystallites are preferentially oriented along the [111] direction. Interesting results have been obtained from the study of PL spectra. A peak corresponding to 376nm in the emission spectra for 0%, 5% and 10% copper doped samples. The samples show sharp and strong UV emission corresponding to the near band edge emission under excitation of 275nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase relations in a barium-rich high-temperature region (25-45 mol% CuO, 900-1100 deg. C) of the BaO-CuO{sub x} system

The phase relations have been studied in the BaO-CuO{sub x} system in the range of 25.0-45.0 mol% CuO at 900-1100 deg. C at P(O{sub 2})=21 kPa (air) by visual polythermal analysis (VPA), powder X-ray diffraction (XRD), electron diffraction (ED) with simultaneous energy-dispersive X-ray (EDX) elemental analysis in a transmission electron microscope (TEM), and iodometric chemical analysis. The discrete deviations 2.02 (101:50), 2.04 (102:50), 2.10 (105:50) of Ba/Cu (Ba:Cu) composition from the stoichiometric ratio 2:1 have been found for the known Ba{sub 2}CuO{sub 3+{delta}} oxides in the subsolidus region 900-970 deg. C. Unit cell parameters of the 101:50 orthorhombic oxide, 102:50 tetragonal one, 105:50 orthorhombic one are, respectively, a=4.049, b=3.899, c=13.034 A; a=3.985, c=12.968 A; a=4.087, b=3.897 and c=12.950 A. ED patterns of the 101:50, 102:50, 105:50 oxides show characteristic supercell reflections with the respective vector 1/60[5 4 0], {approx}2/11<1 1 0> and 1/6[2 0 0]. Oxides of the 2:1, 7:4, 5:3 and 23:20 compositions have been found in the crystallization region 970-1050 deg. C. Unit cell parameters of the 2:1 orthorhombic oxide are a=4.095, b=3.795, c=13.165 A. Interplanar spacings and X-ray characteristic peak intensities of the 7:4, 5:3 and 23:20 oxides are given. Oxides 2:1 and 7:4 melt pseudocongruently at 1020 and 1005 deg. C, oxides 5:3 and 23:20 melt incongruently at 995 and 980 deg. C, respectively. A diagram of the phase relations in the studied region of the BaO-CuO{sub x} system has been constructed, whose structure is considered as the total projection of phase states of the system existing for different x. - Graphical Abstract: A diagram of phase relations in the BaO-CuO{sub x} system in the range of 30.0-45.0 mol% CuO at 900-1050 deg. C at P(O{sub 2})=21 kPa (air) constructed on the data obtained by visual polythermal analysis (the liquidus line), XRD and ED with elemental analysis. Highlights: > A combination of physical-chemical and structural methods was used. > New discrete oxides have been found. > The diagram reflects the total projection of phase states at different x.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of propylene glycol/nitrates ratio on microwave-assisted combustion synthesis of CuO-ZnO-Al2O3 nanocatalyst: Structural and catalytic properties toward hydrogen production from methanol

Highlights: • Applicability of propylene glycol in synthesis of CuO/ZnO/Al{sub 2}O{sub 3} via combustion method. • Addressing the influence of fuel to nitrates ratio on catalytic properties and performance. • Synthesis of stable and active CuO/ZnO/Al{sub 2}O{sub 3} nanocatalyst in methanol to hydrogen. • Achievement of complete conversion at 260 °C by choosing appropriate amount of fuel. • Decrease of CO production by applying suitable fuel/nitrates ratio. - Abstract: A series of CuO-ZnO-Al{sub 2}O{sub 3} nanocatalysts were fabricated by microwave-assisted combustion method to investigate the role of propylene glycol/nitrates ratio. XRD, FESEM, FTIR, EDX, BET and TG techniques were applied to study the physicochemical properties of prepared nanocatalysts. It was found that increasing of fuel/nitrates ratio decreased the specific surface area due to incomplete combustion reaction. TG and FTIR results proved that some combustion residuals such as nitrate species and propylene glycol remained in fabricated samples and their amount increased by increasing of fuel/nitrates ratio. Also, higher dispersion of CuO crystallites as the major active sites of steam methanol reforming achieved by CZA(PG/N = 1). So, it reached the complete conversion of methanol at lower temperature compared to the other samples. The synthesized sample with propylene glycol to nitrates ratio of 1 showed high stability during 1200 min. Moreover, the deactivation study was performed on best and worst synthesized nanocatalysts.

36 MATERIALS SCIENCE↗

Electronic structure of p -type transparent conducting oxide CuAlO 2

We report copper-based delafossite oxides are excellent candidates for the p-type transparent conducting oxide (TCO), which is essential in realizing transparent semiconductor applications. Using angle-resolved photoemission spectroscopy (ARPES), we report the low-energy electronic structure of CuAlO 2 . We found that the band structure near the valence band top is characterized by hole bands with their maxima along the Brillouin zone boundary. Furthermore, the effective masses along the Γ–M and Γ–K directions were found to be (0.6 ± 0.1) m0 and (0.9 ± 0.1) m 0 , respectively, which impose an important benchmark against the existing band calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

200 MeV silver ion irradiation induced structural modification in YBa{sub 2}Cu{sub 3}O{sub 7-y} thin films at 89 K: An in situ x-ray diffraction study

We report in situ x-ray diffraction (XRD) study of 200 MeV Ag ion irradiation induced structural modification in c-axis oriented YBa{sub 2}Cu{sub 3}O{sub 7-y} (YBCO) thin films at 89 K. The films remained c-axis oriented up to a fluence of 2x10{sup 13} ions cm{sup -2}, where complete amorphization sets in. The amorphous ion tracks, the strained region around these tracks, and irradiation induced point defects are shown to control the evolution of the structure with ion fluence. Secondary electrons emanating from the ion paths are shown to create point defects in a cylindrical region of 97 nm radius, which corresponds to their maximum range in the YBCO medium. The point defects are created exclusively in the CuO basal planes of fully oxygenated YBCO, which has not been possible, by other techniques including low energy ion irradiation and thermal quenching. The point defects led to a faster decrease in the integral intensity of XRD peaks at very low fluences of irradiation (PHI<=3x10{sup 10} ions cm{sup -2}) than what can be expected from amorphous tracks. The radius of amorphous ion tracks, estimated from the fluence dependence of integral XRD peak intensity beyond this fluence, was found to be 1.9 nm. Both point defect and the strained region around amorphous ion tracks are shown to contribute to the increase in the c-parameter at 89 K. The full width at half maximum (FWHM) of XRD peaks arising mostly due to the strained region around the ion tracks showed an incubation effect up to 10{sup 12} ions cm{sup -2}, before increasing at higher fluences. Fluence dependence of FWHM gives the cross section of the strained region as 37.9 nm{sup 2}, which is more than three times the cross section of the amorphous ion tracks.

36 MATERIALS SCIENCE↗