Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Significantly increased Raman enhancement on defect-rich O-incorporated 1T-MoS 2 nanosheets

Improving charge transfer is the key to the performance of non-noble metal semiconductor-based surface enhanced Raman scattering (SERS) substrates. In this work, the O-incorporated 1T-MoS 2 nanosheets with rich sulfur defects (ID-MoS 2 ) are obtained by simple calcination of 1T-MoS 2 nanosheets in air atmosphere. Using rhodamine 6G (R6G) as typical probe molecules, ID-MoS 2 nanosheets show ultrahigh Raman enhancement effects with an enhancement factor of 1.24 × 10 7 due to sulfur defects and O incorporation in the 1T-MoS 2 lattice. First-principle density functional theory calculations suggest that the existence of sulfur defects and O incorporation significantly increase the Fermi energy level (E f ) and electronic density of states of ID-MoS 2 . Furthermore, O incorporation can enhance the interactions between the substrate and the adsorbed molecules through electrostatic and hydrogen bonding. All these improve the charge transfer resonance and result in the remarkable SERS activity of ID-MoS 2 nanosheets. This is the first study on the increasing SERS performance of semiconductor substrates by simultaneously employing defect and dopant incorporation. This study provides an approach to optimize the performance of semiconductor-based SERS substrates.

36 MATERIALS SCIENCE↗

Syntheses and Crystal Structures of Rare-Earth Oxyapatites Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm)

Four different rare-earth oxyapatites of Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm) were synthesized using a solution-based method followed by drying, calcination, and high-temperature sintering in air. X-ray powder diffraction and Raman spectroscopy were performed on the synthesized oxyapatites. Here, the RE oxyapatites crystallize in the hexagonal space group P6 3 /m with similar unit cell parameters, increasing linearly with larger RE cations. The unit cell volumes increase linearly whereas the densities decrease nonlinearly with larger RE cations. Raman spectra showed intense bands of the symmetric bending and stretching modes of SiO 4 at ~ 400 and 860 cm -1 regions, respectively. The bands generally shifted to higher frequencies with smaller RE cations in the structures.

36 MATERIALS SCIENCE↗

Enrichment and Recovery of Cr(VI) from Aqueous Solution via a Monolithic Loofah Sponge Modified by Tannins and Arginine

In this study, a monolithic loofah sponge (LS) matrix, which was pretreated by hemicellulase and decorated by amino and guanidine, was successfully endowed with two functions: adsorption and recovery for Cr(VI). As an adsorbent, the modified LS (LS–TAA) has a high adsorption capacity (327.91 mg/g) for Cr(VI), and can be handily reused because of its integrity, good mechanical strength and convenient separation from aqueous solution. As a carrier, the residue of Cr-loaded LS–TAA was discovered to be pure Cr{sub 2}O{sub 3} nanoparticles after calcination. The effect of hemicellulase pretreatment and influencing factors, adsorption kinetics, thermodynamics and isotherm adsorption models were investigated. The samples were characterized by various means including SEM, EDX, FT–IR, XRD, XPS and TEM. The results demonstrated that the LS–TAA should be viewed as a low-cost environment functional material with application potential to treat Cr-polluted wastewater. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Production Procedure and Characterization of Zn-Doped Y-123 Superconducting Samples Prepared by Sol-Gel Method

The superconducting YBa{sub 2}Cu{sub 3−x}Zn{sub x}O{sub 7} (Y-123) bulk materials have been synthesized by using the sol-gel method. Samples are produced as undoped Y-123 and transition metal (Zn)-doped Y-123. Before the final heat treatment, the samples are calcined at 850 °C for 24 h. This process is repeated three times. Then, samples are sintered at 950 °C for 24 h in an air environment and at 500 °C for 5 h in an oxygen atmosphere. The synthesized products are characterized by XRD, R-T, and Vickers microhardness tester. The XRD investigation revealed that the prepared sample has an orthorhombic structure. According to XRD measurements, an orthorhombic structure has not changed with Zn doping. It was observed that undoped and Zn-doped samples have superconductivity properties by electrical measurements. T{sub c}{sup onset} is 89 K for undoped Y-123 sample, and the T{sub c}{sup onset} value decreases monotically with Zn addition. All samples show metallic behavior above T{sub c}{sup onset} temperature. As a result of Vickers microhardness measurements, it is observed that all samples have reverse indentation size effect (RISE) behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation of Cr{sup 3+}-Substituted NiFe{sub 2}O{sub 4} Nanoparticles and Its Microwave Absorption Properties

In the present work, spinel Ni{sub (1−X)}Cr{sub X}Fe{sub 2}O{sub 4} (X = 0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 M) nanoparticles were synthesized by co-precipitation method followed by calcination at 400 °C for 2 h. The structural and morphological properties of the synthesized nanoparticles were studied using powder XRD,micro-Raman measurements, FE-SEM, TEM and EDS. The results revealed that the synthesized nanoparticles were single-crystal, cubic-phase structure with spherical shape. Energy-dispersive X-ray spectroscopy confirmed the elements present in the synthesized nanoparticles. Moreover, microwave absorption properties were measured using vector network analyser (VNA). The minimum reflection loss − 14.44 dB at 9.49 GHz was observed for Ni{sub (1−X)}Cr{sub X}Fe{sub 2}O{sub 4} (X = 0.5 M) nanoparticles at 3 mm thickness. These results suggest that Ni{sub (1−X)}Cr{sub X}Fe{sub 2}O{sub 4} (X = 0.5 M) nanoparticles would be applicable for microwave absorption application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ce-Doping and Reduction Annealing Effects on Magnetic Properties of Pr{sub 2-x}Ce{sub x}CuO{sub 4} Nanoparticles

Magnetic properties of reduced T’-Pr{sub 2-x}Ce{sub x}CuO{sub 4} (T’-PCCO) nanoparticles with x = 0, 0.10, and 0.15 have been investigated. The T’-PCCO samples were synthesized by the chemically dissolved method with HNO{sub 3} as dissolving agents and by the succeeding calcination at 1000 °C for 15 h in air. The reduced T’-PCCO samples were obtained by the reduction annealing at 700 °C for 10 h in Argon atmosphere and at 700 °C for 12 h in vacuum. Rietveld analyses of the X-ray diffraction (XRD) patterns for all the samples have revealed dependences of the c-axis length and the crystal size on the Ce doping and the reduction annealing. XRD analyses and transmission electron microscopy (TEM) images have confirmed T’-PCCO nanoparticles with the size of around 40–100 nm. Magnetic properties of all the T’-PCCO nanoparticles were studied by a superconducting quantum interference device (SQUID) showing a dominant paramagnetic feature with very weak ferromagnetism in the as-synthesized samples at room temperature. It has changed to a pure paramagnetic feature after the reduction annealing in argon atmosphere and an enhanced ferromagnetism through vacuum annealing. This is probably due to the change in the number of oxygen vacancies through the defect recovery and the removal of excess oxygen after both reduction annealing processes, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and Magnetic Behavior of BaAl{sub x}Cr{sub y}Fe{sub 11}O{sub 19} (x + y = 1) Hexagonal Ferrites

The present study aims to analyze barium hexagonal ferrite and its derivation behavior using sol-gel auto-combustion co-doped with Al{sup 3+}/Cr{sup 3+}ions. Also, the effects of dopants on structural and magnetic properties of prepared samples were investigated. To this purpose, the finest powders were preheated at 500 °C for 1 h and calcinated at 900 °C about 2 h. Then, the magnetic powders were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), and vibrating sample magnetometer (VSM). The XRD patterns show the magnetoplumbite phase. According to the Scherrer equation applied, inserting ions led to a decrease in lattice parameters (a and c) and crystallite size. The morphology of synthesized samples was observed by FESEM and proved the hexagonal shapes of the prepared samples. The nanoparticles sizes were recorded between 59 and 79 nm. Moreover, the magnetic properties of prepared samples were specified by VSM. The saturation magnetization (M{sub s}) and remnant magnetization (M{sub r}) of the synthesized magnetic powders were decreased by inserting Al{sup 3+}/Cr{sup 3+} ions, while coercivity (H{sub c}) increased from 5215 to 7178 Oe. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chlorine-free, monolithic lanthanide series rare earth oxide aerogels via epoxide-assisted sol-gel method

Synthesis of chlorine-free, rare earth oxide aerogels from the lanthanide series was achieved using a modified epoxide-assisted sol-gel method. An ethanolic solution of the hydrated metal nitrate, propylene oxide, and ammonium carbonate was found to gel upon heating to 333 K. Critical point drying of the wet gel in CO 2 yielded monolithic aerogels. Most of the aerogels were amorphous as-prepared, but became nano-crystalline after calcination at 923 K in air. The aerogels had high surface areas (up to 150 m 2 /g), low densities (40–225 mg/cm 3 ), and were photoluminescent.

Rietveld refinement↗

Synthesis and characterization of substituted garnet and perovskite-based lithium-ion conducting solid electrolytes

In this study, titanium, tantalum-substituted Li 7 La 3 Z r2-x A x O 12 (LLZO, A = Ta, Ti) garnets, and chromium-substituted La (2/3)-x Li 3x Ti 1-y Cr y O 3 (LLTO) perovskites were prepared by a conventional solid-state reaction and the Pechini processes. The desired crystal phases were obtained by varying the calcination temperature and time, as well as the substitution concentration. All samples indicated decomposition of the precursors when heated above 750 °C and formation of the desired phase after heat treatment at higher temperatures. Neutron diffraction data shows the formation of a predominant cubic phase in the case of Ta-LLZO, and monoclinic phase with minor impurity phases for Cr-LLTO. Ionic conductivity for Ti-LLZO (Li 7 La 3 Zr 1.4 Ti 0.6 O 12 ), Ta-LLZO (Li 6.03 La 3 Zr 1.533 Ta 0.46 O 12 ), and Cr-LLTO (La (2/3)-x Li 3x Ti 0.9 Cr 0.1 O 3 ) at room temperature were found to be 5.21 × 10 –6 , 1.01 ×10 –6 , and 1.2 × 10 –4 S cm –1 , respectively. The activation energies of the compounds were determined from the Arrhenius plot and were 0.44 eV (Ti 0.6 -LLZO), 0.54 eV (Ta 0.5 -LLZO), and 0.20 eV (Cr 0.1 -LLTO).

36 MATERIALS SCIENCE↗

Mechanism of Na{sub 2}SO{sub 4} Promoting Nickel Extraction from Sulfide Concentrates by Sulfation Roasting–Water Leaching

As a more environmentally friendly and energy-efficient route, the sulfation roasting–water leaching technique has been developed for highly effective extraction of non-ferrous metals from nickel sulfide concentrate in the presence of a Na{sub 2}SO{sub 4} additive. The effects of several important roasting parameters—the roasting temperature, the addition of Na{sub 2}SO{sub 4}, the holding time, and the heating rate in particular—have been investigated. The results suggest that about 90 pct Ni, 92 pct Co, 95 pct Cu, and < 1 pct Fe can be leached from the calcine roasted under the optimum conditions. Furthermore, the behavior and mechanism of the Na{sub 2}SO{sub 4} additive in the roasting process have been well addressed by detailed characterization of the roasted product and leaching residue using quantitative phase analysis (QPA) and energy dispersive spectroscopy (EDS) mapping. The Na{sub 2}SO{sub 4} additive was observed to play a noticeable role in promoting the sulfation degree of valuable metals by forming liquid phases [Na{sub 2}Me(SO{sub 4}){sub 2}] at the outermost layer, which can create a suitable dynamic environment for sulfation. Thus, addition of Na{sub 2}SO{sub 4} might be conducive to an alternative metallurgical process involving complex sulfide ores.

36 MATERIALS SCIENCE↗

Improving the Desulfurization Degree of High-Grade Nickel Matte via a Two-Step Oxidation Roasting Process

Generally, sulfur elimination from nickel matte was incomplete in the one-step oxidation roasting process. In this work, X-ray diffraction, scanning electron microscopy/energy-dispersive X-ray spectroscopy, and chemical analysis of the roasted products were carried out to explain this phenomenon. The results indicated that the melting of heazlewoodite was the main limiting factor. Thereafter, the oxidation mechanism of high-grade nickel matte from room temperature to 1000 °C was studied. It was found that the transformation from heazlewoodite (Ni{sub 3}S{sub 2}) to nickel sulfide (NiS) took place from 400 °C to 520 °C. Considering that the melting temperature of NiS was much higher than that of Ni{sub 3}S{sub 2}, a low-temperature roasting step was suggested to suppress the melting of heazlewoodite. Under the optimum conditions (520 °C for 120 minutes followed by 800 °C for 80 minutes), the degree of desulfurization reached 99.52 pct. These results indicated that the two-step oxidation roasting method could be a promising process for producing low-sulfur calcine from high-grade nickel matte.

36 MATERIALS SCIENCE↗

Study of Morphology and Magnesium Purity, Formed by Vapor Phase Through Silicothermic Reduction

This article describes the influence of temperature profile on the morphology and impurity distributions of magnesium vapor condensation during silicothermic reduction of calcined dolomite. The formation of magnesium crystals was comprehensively analyzed by optical microscopy, scanning electron microscopy (SEM), and inductively coupled plasma (ICP). The results showed that the temperature changed the morphology and purity of condensation products in the condenser. When the temperature of the condenser zone was lower than 250 °C, the magnesium vapor condensation was fine and noncompacted. The crystal growth of magnesium occurred in the range of 250 °C and 380 °C. It was found that crystal magnesium became coarser and denser at higher temperatures. Based on the analysis of crystallized magnesium, the impurity distributions decreased at temperatures higher than those of the condenser. Furthermore, this indicates that the impurity contents with less than 0.04 pct were distributed randomly through the condenser.

36 MATERIALS SCIENCE↗

Mechanism and Kinetics of Stibnite Chloridizing with Calcium Chloride-Oxygen at 500 °C to 650 °C

Copper concentrates with high levels of toxic impurity elements such as As, Sb Bi, must be pretreated before processing in the current smelting/converting refineries. The classical method for the pretreatment of dirty copper concentrates is partial oxidizing roasting, where the impurities are eliminated through the gas phase. However, volatilization of antimony and bismuth in conventional roasting processes using air or oxygen-deficient air is hardly achieved since antimony and bismuth remain in the calcine as non-volatile oxides. The chloridizing of stibnite with calcium chloride was studied as an alternative to volatilize antimony from impure copper concentrates because the vapor pressure of antimony chloride is higher than the vapor pressures of antimony oxide or sulfide at low temperatures. Thus, in the present work, the kinetic study of chloridizing of antimony from stibnite using calcium chloride as the chloridizing agent was studied at roasting temperatures 500 °C to 650 °C. The salient aspects determined in this study are that the chloridizing of stibnite starts with the formation of Sb{sub 2}O{sub 3} followed by the chloridizing of this oxide by chlorine gas. The formation of antimony oxide Sb{sub 6}O{sub 13} deters the complete elimination of antimony from stibnite. By using the unreacted shrinking core model 1 − (1 − α){sup 1/3} = k{sub r}t, the chloridizing rate of stibnite with CaCl{sub 2} and oxygen was found to be of 0.6 order with respect to the oxygen partial pressure, and the calculated energy of activation is 62 kJ mol{sup −1} in the range from 500 °C to 650 °C.

36 MATERIALS SCIENCE↗

Synthesis of Self-Assembled rGO-Co{sub 3}O{sub 4} Nanoparticles in Nanorods Structure for Supercapacitor Application

A simple hydrothermal process was used to design self-assembled Co{sub 3}O{sub 4} nanoparticles in nanorod structure in the presence of graphene oxide as a template. The as-prepared Co{sub 3}O{sub 4} sample in a loose powder form was calcined at 450 °C to get the well-crystalline phase of the same compound. The obtained Co{sub 3}O{sub 4} powder sample was characterized by using the powder XRD and SEM. The XRD pattern shows totally nine distinct reflection peaks of (111), (220), (311), (222), (400), (422), (511), (440), and (533) planes. The most intense peaks were chosen to evaluate the structural parameters. The lattice parameters (a), volume (V), and density (ρ) of the samples are 8.09 Å, 529.47 Å{sup 3}, 6.06 g/cc, which are comparable to the value of lattice parameter (a = 8.056 Å), volume (V = 528.30 Å{sup 3}), and density (ρ = 6.055 gm/cc) for bulk Co{sub 3}O{sub 4}. The average size of the Co{sub 3}O{sub 4} nanoparticles is 14 nm which is smaller than the SEM size of 50 nm corresponding to the agglomeration of tiny particles. Further, the formation of Co{sub 3}O{sub 4} nanoparticles were also confirmed by obtaining the band at 569, 1334,1337, 1566, and 3397 cm{sup −1} in FTIR spectrum. Totally five characteristics peaks from Co{sub 3}O{sub 4} at 182.57, 456.49, 505.84, 605.80, and 618.02 cm{sup −1} and peaks from GO-Co{sub 3}O{sub 4} at 182.57, 483.44, 505.84, 605.80, and 618.02 cm{sup −1} corresponding to F{sub 2g}, E{sub g}, F{sub 2g}, F{sub 2g,} and A{sub g} modes of the crystalline Co{sub 3}O{sub 4}, respectively, in the Raman spectra. In the case of GO-Co{sub 3}O{sub 4} composite, low-intensity peaks of D and G bands are observed. The specific capacitance in rGO-Co{sub 3}O{sub 4} nanocomposite is about 65.15 Fg{sup −1}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, Processing and Properties of Calcium- and Nickel-Doped Yttrium Chromates(III) Y{sub 0.8}Ca{sub 0.2}Cr{sub 1−x}Ni{sub x}O{sub 3} (x = 0-0.3) and Studies on Their Potential Application as Coatings for SOFC Interconnects

In the present study, a calcium- and nickel-doped yttrium chromates (YCCN)-based, conductive–protective layers for metallic interconnects used in the intermediate-temperature solid oxide fuel cells (IT-SOFCs) were investigated. Synthesis of Y{sub 0.8}Ca{sub 0.2}Cr{sub 1−x}Ni{sub x}O{sub 3} (x = 0; 0.15 and 0.3) powders was performed using a wet chemistry method with two different complexing agents: ethylenediaminetetraacetic acid and glycine. Based on the result of thermal analysis of obtained precursors, optimal conditions of the calcination process were determined. Powders were then milled, compacted and sintered at different temperatures using free sintering method, into series of dense, polycrystalline sinters. The use of glycine precursor allowed obtaining a single-phase material in all cases. Based on the electrical and sintering properties, the Y{sub 0.8}Ca{sub 0.2}Cr{sub 0.85}Ni{sub 0.15}O{sub 3} material was selected for further studies. It was deposited using cost-effective screen-printing method on the Crofer 22APU ferritic stainless steel. To investigate properties and suitability of the resulting layer/steel system for IT-SOFCs applications, the high-temperature, dual-atmosphere studies were carried out for the first time for ceramic/metallic system, in conditions as close as possible to actual working conditions of the fuel cell. The layer exhibited high stability and good protective properties. The area-specific resistance of the studied ceramic layer/metallic substrate composite was determined, with the obtained value of 0.0366 Ω cm{sup 2} being within the arbitrary limit set for these materials (0.1 Ω cm{sup 2}). The results show that the investigated materials are suitable for the projected application.

36 MATERIALS SCIENCE↗

Chloride Molten Salt Electrolysis Enables Integrated and Energy-Efficient Process for NdFeB Magnet Fabrication

Rare-earth elements (REEs) have been identified by NATO, the USDOE, and USGS as critical materials, i.e., materials which have significant demand yet pose supply-chain risks. Many of the existing processes for separations, metallization, and final parts production used across the REE supply chain involve energy intensive steps. For example, neodymium (Nd or NdPr) is produced using oxyfluoride electrolysis of Nd 2 O 3 , which requires hydrofluoric acid to produce a key electrolyte component (NdF 3 ) and generates undesired perfluorocarbon (PFC) gases. Such challenges make securing a resilient supply chain for NdFeB permanent magnets in countries like the United States prohibitively difficult. Here, we propose a chloride-based MSE process that circumvents these challenges, delivering high-purity NdPr from a (NdPr)Cl 3 feed from upstream REE separations. This eliminates environmentally-damaging steps of oxalate or carbonate precipitation and calcination, and enables superior production rates due to greater solubility of (NdPr)Cl 3 in chloride melts compared to Nd 2 O 3 . We show that CMSE generates high-purity NdPr (99.4 wt.%) while being energy-efficient (~ 6 kWh/kg-Nd). NdPr from CMSE was used to fabricate a NdFeB magnet with an excellent maximum energy product (> 40 MGOe), comparable to commercially available NdFeB magnets. This establishes CMSE as a leading approach for integrated, energy-efficient NdFeB magnet production.

Materials science↗

Ultrasound-driven fabrication of high-entropy alloy nanocatalysts promoted by alcoholic ionic liquids

High-entropy alloy nanoparticles (HEA-NPs) are highly underutilized in heterogeneous catalysis due to the absence of a reliable, sustainable, and facile synthetic method. Herein, we report a facile synthesis of HEA nanocatalysts realized via an ultrasound-driven wet chemistry method promoted by alcoholic ionic liquids (AILs). Owing to the intrinsic reducing ability of the hydroxyl group, AILs were synthesized and utilized as environmentally friendly alternatives to conventional reducing agents and volatile organic solvents in the synthetic process. Under high-intensity ultrasound irradiation, Au 3+ , Pd 2+ , Pt 2+ , Rh 3+ , and Ru 3+ ions were co-reduced and transformed into single-phase HEA (AuPdPtRhRu) nanocrystals without calcination. Characterization results reveal that the as-synthesized nanocrystals are composed of elements of Au, Pd, Pt, Rh, and Ru as expected. Compared to the monometallic counterparts such as Pd-NPs, the carbon-supported HEA nanocatalysts show superior catalytic performance for selective hydrogenation of phenol to cyclohexanone in terms of yield and selectivity. Our synthetic strategy provides an improved and facile methodology for the sustainable synthesis of multicomponent alloys for catalysis and other applications.

36 MATERIALS SCIENCE↗

Template-free fabrication of fractal porous Y 2 O 3 monolithic foam and its functional modification by Ni-doping

Fractal structures which display nearly the same character at every scale exist widely in nature, however, it is still a great challenge to fabricate a fractal nanostructure. Herein, a Y 2 O 3 monolith with unique hierarchically fractal porous structure was fabricated via calcination of a fractal porous coordination polymer precursor. The monolith exhibits porous feature with the pore-size ranging from micrometers to nanometers. Interestingly, each level of the pore-wall is composed of secondary porous structures, whose pore-wall is composed of sub-level self-similar porous feature. Moreover, by Ni-doping in the coordination polymer precursor, fractal porous Ni@Y 2 O 3 was prepared, and exhibited enhanced activity in ethanol steam reforming compared with that of a common supported NiO catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗