Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Band structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Cross-shell excitations in Ca 46 studied with fusion reactions induced by a reaccelerated rare isotope beam

Discovering unexplored high-spin states in neutron-rich nuclei can open up a new direction to study band structure and the associated shell structure in isospin-asymmetric many-body systems. However, experimental reach has so far been limited to neutron-deficient or stable nuclei which are preferentially produced in fusion reactions used in such studies. Here in this paper, we report the first γ-ray spectroscopy with fusion reactions using a reaccelerated rare-isotope beam of 45 K performed at the ReA3 facility of the National Superconducting Cyclotron Laboratory. Using particle and γ-ray coincidence techniques, three new higher-lying states around 6 MeV and five new γ-ray transitions were identified for 46 Ca, suggesting three independent band structures formed from different particle-hole configurations. The rotational-like band built on the 0$^+_2$ state is established up to the tentatively assigned 6$^+_2$ state. New results are compared to large-scale shell model calculations, confirming the validity of the effective interaction describing particle-hole excitations across the Z=20 and N=28 shell gaps in the vicinity of doubly-magic 48 Ca.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Study of the electronic and magnetic properties of EuAlO{sub 3} using FP-LAPW method

The electronic and magnetic properties of EuAlO{sub 3} is calculated by first-principles full-potential linearized augmented plane wave (FP-LAPW) method based on density functional theory (DFT). Density of states (DOS), magnetic moments and band structures of the systems are presented. For the exchange and correlation energy, local spin density approximation (LSDA+U) with the inclusion of Hubbard potential U is used. Our calculation showed an indirect band gap of the order of 4 eV for EuAlO{sub 3} in the spin down channel of the DOS and band structures supporting HMF nature of the system. The effective magnetic moment of 6.00 µ{sub B} also supported the above conclusion with an integral value. The DOS of Eu were found responsible for the HMF nature of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and x-ray magnetic circular dichroism in YbAgCu4 and YbInCu4

X-ray absorption and magnetic circular dichroism spectra at the L-3 edge of Yb have been studied theoretically in the mixed-valent compounds YbAgCu4 and YbInCu4 using the fully relativistic Dirac linear muffin-tin orbital band structure method. The effect of the spin-orbit (SO) interaction and Coulomb repulsion U on the electronic structure of YbAgCu4 and YbInCu4 is examined in the frame of the local spin-density approximation (LSDA)+SO+U method. The core-hole effect in the final states as well as the effect of the electric quadrupole E-2 and magnetic dipole M-1 transitions have been investigated. The calculated results are compared with available experimental data.

Antonov, VN↗

Single-crystal oxoborate (Pb{sub 3}O){sub 2}(BO{sub 3}){sub 2}WO{sub 4}: Growth and characterization

Highlights: ► (Pb{sub 3}O){sub 2}(BO{sub 3}){sub 2}WO{sub 4}, has been prepared by solid-state reaction methods below 620 °C. ► Single-crystal XRD analysis showed that it crystallizes in the orthorhombic group. ► The crystal structure is composed of one-dimensional 1/∞ [Pb{sub 3}O]{sup 4+} chains. ► BO{sub 3} and WO{sub 4} groups are located around the chains to hold them via Pb-O bonds. ► The IR spectra further confirmed the presence of BO{sub 3} groups. -- Abstract: An oxoborate, (Pb{sub 3}O){sub 2}(BO{sub 3}){sub 2}WO{sub 4}, has been prepared by solid-state reaction methods below 620 °C. Single-crystal XRD analysis shows that it crystallizes in the orthorhombic group Cmcm with a = 18.480(4) Å, b = 6.3567(13) Å, c = 11.672(2) Å, Z = 4. The crystal structure is composed of one-dimensional 1/∞ [Pb{sub 3}O]{sup 4+} chains formed by corner-sharing OPb{sub 4} tetrahedra. BO{sub 3} and WO{sub 4} groups are located around the chains to hold them together via Pb-O bonds. The IR spectra further confirmed the presence of BO{sub 3} groups. Furthermore we have performed theoretical calculations by employing the all-electron full potential linearized augmented plane wave (FP-LAPW) method to solve the Kohn Sham equations. Starting from our XRD data we have optimized the atomic positions by minimizing the forces. These are used to calculate the electronic band structure, the atomic site-decomposed density of states, electron charge density and the chemical bonding features. The calculated electronic band structure and densities of states suggest that this oxoborate possesses a wide energy band gap. The valence band maxima and the conduction band minima are located at Y point in the Brillouin zone resulting in a direct energy band gap of 2.3 eV using the local density approximation and 2.6 eV for the Engel–Vosko generalized gradient approximation. This compares well with our experimentally measured energy band gap of 2.9 eV. From our calculated electron charge density distribution, we obtain an image of the electron clouds that surround the molecules in the unit cell of the crystal. The chemical bonding features were analyzed and the substantial covalent interactions are observed between Pb and O, B and O and W and O atoms.

36 MATERIALS SCIENCE↗

Anisotropic superconductivity in the spin-vortex antiferromagnetic superconductor CaK(Fe 0.95 Ni 0.05 ) 4 As 4

High critical temperature superconductivity often occurs in systems where an antiferromagnetic order is brought near T = 0 K by slightly modifying pressure or doping. CaKFe 4 As 4 is a superconducting, stoichiometric iron-pnictide compound showing optimal superconducting critical temperature with T c as large as 35 K. Doping with Ni induces a decrease in T c and the onset of spin-vortex crystal (SVC) antiferromagnetic order, which consists of spins pointing inwards to or outwards from alternating As sites on the diagonals of the in-plane square Fe lattice. In this work we study the band structure of CaK(Fe 0.95 Ni 0.05 ) 4 As 4 (T c = 10 K, T SVC = 50 K) using quasiparticle interference with a scanning tunneling microscope and show how the SVC modifies the band structure and induces a fourfold superconducting gap anisotropy.

36 MATERIALS SCIENCE↗

Thévenin equivalence in disorderless quantum networks

We outline the procedure of extending the Thévenin equivalence principle for classical electric circuits to reducing Aharonov-Bohm-based quantum networks into equivalent models. With examples, we show from first principles how the requirements are related to the electron band structure's Fermi level and the lattice spacing of the network. Quantum networks of varying degrees of coupling strength from four basic classifications of single and double entangled loops sharing symmetry and highly correlated band structures are used to demonstrate the concept. We show the limitations of how the principle may be applied. Several classes of examples are given and their equivalent forms are shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of pressure on the physical properties of the superconductor NiBi 3

Here, we present an experimental study of the superconducting properties of NiBi 3 as a function of pressure by means of resistivity and magnetization measurements and combine our results with DFT calculations of the band structure under pressure. We find a moderate suppression of the critical temperature T c from ~ 4.1 K to ~ 3 K by pressures up to 2 GPa. By taking into account the change of the band structure as a function of pressure, we argue that the decrease in T c is consistent with conventional, electron-phonon-mediated BCS-type superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi surface interconnectivity and topology in Weyl fermion semimetals TaAs, TaP, NbAs, and NbP

The family of binary compounds including TaAs, TaP, NbAs, and NbP was recently discovered as the first realization of Weyl semimetals. In order to develop a comprehensive description of the charge carriers in these Weyl semimetals, we performed detailed and systematic electronic band structure calculations which reveal the nature of Fermi surfaces and their complex interconnectivity in TaAs, TaP, NbAs, and NbP. In conclusion, our work reports a comparative and comprehensive study of Fermi surface topology and band structure details of all known members of the Weyl semimetal family and hence provides the fundamental knowledge for realizing the many predicted exotic topological quantum physics of Weyl semimetals based on the TaAs class of materials.

36 MATERIALS SCIENCE↗

Nernst power factor and figure of merit in the compensated semimetal ScSb

Recently, topological semimetals have emerged as strong candidates for solid-state thermomagnetic refrigerators due to their enhanced Nernst effect. This enhancement arises from the combined contributions of the Berry-curvature-induced anomalous Nernst coefficient associated with topological bands and the normal Nernst effect resulting from synergistic electron-hole compensation. Generally, these two effects are intertwined in topological semimetals, making it challenging to evaluate them independently. Here, we report the observation of a high Nernst effect in the electron-hole compensated semimetal ScSb with topologically trivial electronic band structures. Remarkably, we find a high maximum Nernst power factor of 𝑃⁢𝐹 𝑁 ∼ 35 × 10 −4 W m −1 K −2 in ScSb. The Nernst thermopower (𝑆 𝑥⁢𝑦 ) exhibits a peak of ∼ 47 µ⁢V/K at 12 K and 14 T, yielding a Nernst figure of merit (𝑧 𝑁 ) of ∼ 28 × 10 −4 K −1 . Notably, despite its trivial electronic band structure, both the 𝑃⁢𝐹 𝑁 and 𝑧 𝑁 values of ScSb are comparable to those observed in topological semimetals with Dirac band dispersions. In conclusion, the origin of the large Nernst signal in ScSb is explained by compensated electron and hole carriers, through Hall resistivity measurements, angle-resolved photoemission spectroscopy, and density functional theory calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and theoretical electronic structure and symmetry effects in ultrathin NbSe2 films

Layered quasi-two-dimensional transition-metal dichalcogenides (TMDCs), which can be readily made in ultrathin films, offer excellent opportunities for studying how dimensionality affects electronic structure and physical properties. Among all TMDCs, NbSe2 is of special interest; bulk NbSe2 hosts a charge-density-wave phase at low temperatures and has the highest known superconducting transition temperature, and these properties can be substantially modified in the ultrathin film limit. Motivated by these effects, we report herein a study of few-layer NbSe2 films, with a well-defined single-domain orientation, epitaxially grown on GaAs. Angle-resolved photoemission spectroscopy was used to determine the electronic band structure and the Fermi surface as a function of layer thickness; first-principles band-structure calculations were performed for comparison. The results show interesting changes as the film thickness increases from a monolayer (ML) to several layers. The most notable changes occur between a ML and a bilayer, where the inversion symmetry in bulk NbSe2 is preserved in the bilayer but not in the ML. Finally, the results illustrate some basic dimensional effects and provide a basis for further exploring and understanding the properties of NbSe2.

36 MATERIALS SCIENCE↗

Tuning the photovoltaic effect of multiferroic CoFe{sub 2}O{sub 4}/Pb(Zr, Ti)O{sub 3} composite films by magnetic fields

The 0–3 type CoFe{sub 2}O{sub 4}-Pb(Zr,Ti)O{sub 3} (CFO-PZT) multiferroic composite films have been prepared by a sol-gel process and spin-coating technique. A confirmable photovoltaic effect is observed under ultraviolet light irradiation. Moreover, this photovoltaic effect can be tuned by external magnetic fields. The maximum magnetic modulation ratios of short-circuit current density and open-circuit voltage can reach as high as 13.7% and 12.8% upon the application of 6 kOe DC magnetic field. Through remnant polarization measurements under various magnetic fields and detailed analysis of the energy band structures, we elucidate the mechanism of tuning photovoltaic effect by magnetic fields and attribute it to the combination of two factors. One is the decreased ferroelectric-polarization-induced depolarization electric field and another is the band structure reconstruction at CFO-PZT interfaces, both of which are dominated by the magnetoelectric coupling via interfacial stress transferring at nanoscale. This work makes some attempts of coupling photo-induced effects with magnetoelectric effect in multiferroic materials and will widen the practical ranges of multiferroic-based applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Half-Heusler topological insulators: A first-principles study with the Tran-Blaha modified Becke-Johnson density functional

We systematically investigate the topological band structures of half-Heusler compounds using first- principles calculations. The modified Becke-Johnson exchange potential together with local-density approxi- mation for the correlation potential MBJLDA has been used here to obtain accurate band inversion strength and band order. Our results show that a large number of half-Heusler compounds are candidates for three- dimensional topological insulators. The difference between band structures obtained using the LDA and MB- JLDA potential is also discussed.

36 MATERIALS SCIENCE↗

Existence of electron and hole pockets and partial gap opening in the correlated semimetal Ca 3 Ru 2 O 7

The electronic band structure of correlated Ca 3 Ru 2 O 7 featuring an antiferromagnetic (AFM) as well as a structural transition has been determined theoretically at high temperatures, which has led to the understanding of the remarkable properties of Ca 3 Ru 2 O 7 , such as the bulk spin-valve effects. However, its band structure and Fermi surface (FS) below the structural transition have not been resolved, even though a FS consisting of electron pockets was found experimentally. Here we report magnetoelectrical transport and thermoelectric measurements with the electric current and temperature gradient directed along the a and b axes, respectively, of an untwined single crystal of Ca 3 Ru 2 O 7 . The thermopowers obtained along the two crystal axes were found to show opposite signs at low temperatures, demonstrating the presence of both electron and hole pockets on the FS. In addition, how the FS evolves across T* = 30K at which a distinct transition from coherent to incoherent behavior occurs was also inferred: the Hall and Nernst coefficient results suggest a temperature- and momentum-dependent partial gap opening in Ca 3 Ru 2 O 7 below the structural transition with a possible Lifshitz transition occurring at T*. In conclusion, the experimental demonstration of a correlated semimetal ground state in Ca 3 Ru 2 O 7 calls for further theoretical studies of this remarkable material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of strain along C-axis NbS{sub 2}

We have studied electronic properties of double layered hexagonal structure of the Niobium Di-Sulphide (2H-NbS{sub 2}) superconductor for various strains introduced along the c-axis using ab-initio calculations. The DFT calculations based on Full Potential Linearized Augmented Plane Wave (FPLAPW) method are performed using the ELK code. The total energy curve (E vs a), Density of States (DOS) and the Band structure calculations obtained in this work are matching with the earlier reports. The Pressure-Volume (P-V) diagram for 2H-NbS{sub 2} was obtained using the Equation of State(EOS) calculations, which provides the relationship between the pressure and strain applied along the c-axis. The band structures for various strains ranging from 0 percent to 10 percent along c-axis in steps of 2 percent are obtained. We note that there are increasing number of bands crossing over the Fermi energy level with increase in strain. Thus, we conclude that with increasing strain along c-axis, number of conduction bands crossing the E{sub F} increases, which gives rise to more conduction states and hence higher conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiband effects in equations of motion of observables beyond the semiclassical approach

The equations of motion (EOM)for the position and gauge invariant crystal momentum are considered for multiband wave packets of Bloch electrons. For a localized packet in a subset of bands well-separated from the rest of the band structure of the crystal, one can construct an effective electromagnetic Hamiltonian with respect to the center of the packet. We show that the EOM can be obtained via a projected operator procedure, which is derived from the adiabatic approximation within perturbation theory. These relations explicitly contain information from each band captured in the expansion coefficients and energy band structure of the Bloch states as well as non-Abelian features originating from interband Berry phase properties. This general and transparent Hamiltonian-based approach is applied to a wave packet spread over a single band, a set of degenerate bands, and two linear crossing bands. The generalized EOM hold promise for novel effects in transport currents and Hall effect phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-principles study of mechanical and electronic properties of bent monolayer transition metal dichalcogenides

The mechanical and electronic properties of transition metal dichalcogenide (TMD) monolayers corresponding to transition groups IV, VI, and X are explored under mechanical bending from first principles calculations using the strongly constrained and appropriately normed (SCAN) meta-GGA. SCAN provides an accurate description of the phase stability of the TMD monolayers. Our calculated lattice parameters and other structural parameters agree well with experiment. We find that bending stiffness (or flexural rigidity) increases as the transition metal group goes from IV to X to VI, with the exception of PdTe 2 . Variation in mechanical properties (local strain, physical thickness) and electronic properties (local charge density, band structure) with bending curvature is discussed. The local strain profile of these TMD monolayers under mechanical bending is highly nonuniform. The mechanical bending tunes not only the thickness of the TMD monolayers, but also the local charge distribution as well as the band structures, adding more functionalization options to these materials.

36 MATERIALS SCIENCE↗

Spin-resolved self-doping tunes the intrinsic half-metallicity of AlN nanoribbons

Here, we present a first-principles theoretical study of electric field-and straincontrolled intrinsic half-metallic properties of zigzagged aluminium nitride (AlN) nanoribbons. We show that the half-metallic property of AlN ribbons can undergo a transition into fully-metallic or semiconducting behavior with application of an electric field or uniaxial strain. An external transverse electric field induces a full charge screening that renders the material semiconducting. In contrast, as uniaxial strain varies from compressive to tensile, a spin-resolved selective self-doping increases the half-metallic character of the ribbons. The relevant strain-induced changes in electronic properties arise from band structure modifications at the Fermi level as a consequence of a spin-polarized charge transfer between p-orbitals of the N and Al edge atoms in a spin-resolved self-doping process. This band structure tunability indicates the possibility of designing magnetic nanoribbons with tunable electronic structure by deriving edge states from elements with sufficiently different localization properties. Finite temperature molecular dynamics reveal a thermally stable half-metallic nanoribbon up to room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Genomic Design of Strong Direct-Gap Optical Transition in Si/Ge Core/Multishell Nanowires

Finding a Si-based material with strong optical activity at the band-edge remains a challenge despite decades of research. The interest lies in combining optical and electronic functions on the same wafer, while retaining the extraordinary know-how developed for Si. However, Si is an indirect-gap material. The conservation of crystal momentum mandates that optical activity at the band-edge includes a phonon, on top of an electron-hole pair, and hence photon absorption and emission remain fairly unlikely events requiring optically rather thick samples. A promising avenue to convert Si-based materials to a strong light-absorber/emitter is to combine the effects on the band-structure of both nanostructuring and alloying. The number of possible configurations, however, shows a combinatorial explosion. Furthermore, whereas it is possible to readily identify the configurations that are formally direct in the momentum space (due to band-folding) yet do not have a dipole-allowed transition at threshold, the problem becomes not just calculation of band structure but also calculation of absorption strength. Using a combination of a genetic algorithm and a semiempirical pseudopotential Hamiltonian for describing the electronic structures, we have explored hundreds of thousands of possible coaxial core/multishell Si/Ge nanowires with the orientation of [001], [110], and [111], discovering some 'magic sequences' of core followed by specific Si/Ge multishells, which can offer both a direct bandgap and a strong oscillator strength. The search has revealed a few simple design principles: (i) the Ge core is superior to the Si core in producing strong bandgap transition; (ii) [001] and [110] orientations have direct bandgap, whereas the [111] orientation does not; (iii) multishell nanowires can allow for greater optical activity by as much as an order of magnitude over plain nanowires; (iv) the main motif of the winning configurations giving direct allowed transitions involves rather thin Si shell embedded within wide Ge shells. We discuss the physical origin of the enhanced optical activity, as well as the effect of possible experimental structural imperfections on optical activity in our candidate core/multishell nanowires.

36 MATERIALS SCIENCE↗