Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BRITTLENESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Elastic Properties and Deformation Mechanisms in the van der Waals Single-Crystalline Indium Selenide

The bulk van der Waals (vdW) single-crystalline indium selenide (β-InSe) displays exceptional plasticity in a layered crystalline form at both micro- and macroscale. However, the nanoscale origin of plasticity remains unclear. Herein, an atomic-level study on the deformation mechanisms of InSe by using first-principles calculations is reported. Remarkable anisotropic elasticity is observed in the vdW InSe layered crystal, and the stiffness is dramatically softened because of the vdW gap in the layered structure. The simulations capture the distinct fracture modes in the uniaxial tensile deformation, depending on the loading directions—brittle fracture in the [100] and [110] directions while ductile failure in the [001] direction. The InSe layered crystal structure exhibits superplastic deformability under uniaxial compression. Different transition pathways, including interlayer tangling, amorphization, and cross-linking, are tracked along respective deformation directions. The unprecedented plasticity of InSe layered crystals can be attributed to the phase transition coupled with interlayer gliding and cross-layer dislocation slipping. Here, this study deepens our understanding of the deformation mechanisms of layered materials at the atomistic level and provides insights into tailoring material properties for low-dimensional material design based on its deformation mechanisms.

2D materials↗

Strain Field Around Individual Dislocations Controls Failure

Understanding material failure on a fundamental level is a key aspect in the design of robust structural materials, especially for metals and alloys capable to undergo plastic deformation. In the last decade, significant progress is made in quantifying the stresses associated with failure in both experiments and simulations. Nonetheless, the processes occurring on the most essential level of individual dislocations that govern semi-brittle and ductile fracture are still experimentally not accessible, limiting the failure prediction capabilities. Therefore, in the present work, a one-of-a-kind nanoscale fracture experiment is conducted on a single crystalline Cr bending beam in situ in the transmission electron microscope and for the first time quantify the transient strains around individual dislocations, as well as of the whole dislocation network during crack opening. The results reveal the importance of both pre-existing and newly emitted dislocations for crack-tip shielding via their intrinsic strain field and provide guidelines to design more damage tolerant materials.

36 MATERIALS SCIENCE↗

Super Flexible Transparent Conducting Oxide-Free Organic–Inorganic Hybrid Perovskite Solar Cells with 19.01% Efficiency (Active Area=1 cm 2 )

Highly efficient organic-inorganic hybrid perovskite solar cells (OIHP-SCs) are often fabricated on a transparent conducting oxide (TCO) substrate such as indium tin oxide (ITO). However, the presence of TCOs is disadvantageous to the development of flexible OIHP-SCs due to the brittle nature of ITO which is easily breakable during bending. Herein, a flexible TCO-free OIHP-SC is demonstrated by using lithium bis(trifluoromethane)sulfonimide (Li-TFSI) as a codopant for the single-layer graphene transparent conducting electrode and poly(triarylamine) hole-transporting material (HTM) on a flexible polydimethylsiloxane substrate. The optical and electrical properties of the Li-TFSI-doped graphene substrate are measured by controlling the doping amount and the best conditions for charge extraction are established at a doping concentration of 20 mm Li-TFSI, thus optimizing the device photovoltaic performance. As a result, a highest power conversion efficiency of 19.01% is demonstrated by the flexible TCO-free OIHP-SC devices with an active area of 1 cm 2 . In addition, the flexible TCO-free OIHP-SCs exhibit good bending stability after 5000 bending cycles at radii of 6, 4, and 2 mm and excellent light soaking stability under 1 Sun light intensity over 1000 h as opposed to the poor stability when using poly(3,4-ethylenedioxythiophene) polystyrene sulfonate as the HTM.

14 SOLAR ENERGY↗

Rate dependent response and failure of a ductile epoxy and carbon fiber reinforced epoxy composite

An extensive characterization suite has been performed on the response and failure of a ductile epoxy 55A and uniaxial carbon fiber reinforced epoxy composite of IM7 fibers in 55A resin from the quasistatic to shock regime. The quasistatic and intermediate strain rate response, including elastic modulus, yield and failure have are characterized by quasistatic, SHPB, and DMA measurements as a function of fiber orientation and temperature. The high strain rate shock effect of fiber orientation in the composite and response of the pure resin are presented for plate impact experiments. It has previously been shown that at lower impact velocities the shock velocity is strongly dependent on fiber orientation but at higher impact velocity the in-plane and through thickness Hugoniots converge. The current results are compared with previous studies of the shock response of carbon fiber composites with more conventional brittle epoxy matrices. The spall response of the composite is measured and compared with quasistatic fracture toughness measurements.

36 MATERIALS SCIENCE↗

An Improved Fracture Mechanics-Informed Multiscale Thermomechanical Damage Model for Ceramic Matrix Composites

This paper extends recent work done by the authors in modeling length scale-dependent damage behavior of ceramic matrix composites (CMCs) to include effects of local anisotropy introduced by matrix cracking. This model captures scale-dependent damage initiation and propagation behavior of the brittle matrix by employing internal state variable (ISV) theory within a multiscale modeling framework to obtain damaged matrix stress/strain constitutive relationships at each length scale. The damage ISV captures the effects of matrix cracking and growth by using fracture mechanics and the self-consistent scheme to determine the reduced stiffness of the cracked matrix. Matrix cracks, which activate when stress intensity factors near manufacturing induced cavities exceed the fracture toughness of the material, are assumed to be transversely isotropic in the plane of the crack, and matrix anisotropy occurs when the damaged stiffness tensor is rotated from the crack plane to the global axes. The crack progression and temporal evolution of the damage ISV are governed by fracture mechanics and crack growth kinetics. The model effectively captures first matrix cracking, which is the first significant deviation from linear elasticity. The nonlinear predictive capabilities of the material model are demonstrated for monolithic silicon carbide (SiC) and a 2D woven five-harness satin (5HS) carbon fiber SiC matrix (C/SiC) CMC.

Skinner, Travis↗

Joining Dissimilar Materials via Rotational Hammer Riveting Technique

A mechanically robust joining method for Mg/Al and Mg/CFRP could enable multi-material assemblies that decrease vehicle weight while offering more flexibility for designers. However, certain challenges exist for joining Mg/Al and Mg/CFRP. Mechanical joining, such as conventional riveting, clinching and bolting do not form a metallurgical bond between the fastener and metal sheet being fastened. Large differences in physical and mechanical properties of metals and polymers make joining Al or Mg to CFRP challenging via various welding techniques. With solid-state and fusion based welding, rapid formation of brittle intermetallic compounds at the Mg/Al interface lead to interfacial fracture under mechanical loading. In this study, a Rotational Hammer Rivet (RHR) technique was developed to fabricate Mg/CFRP and Mg/Al joints. With RHR technique, direct joining between Mg/Al and Mg/CFRP were replaced by joining Mg rivet head and top Mg sheet. Through heat generated by plastic deformation of an Mg rivet, RHR creates a metallurgical bond between rivet head and Mg sheet which seals corrosive electrolyte from penetrating around the rivet head.

riveting, magnesium alloys, CFRP, Dissimilar Joini↗

Anodization Compatibility of Eutectic Aluminum–Cerium Alloys

Anodizing is the most common method for producing corrosion resistant layer coatings for aluminum alloys. It is possible to use anodizing with most commercial aluminum alloys to increase material corrosion resistance, but often the brittle, passive oxide layer formed during anodization does not adhere well to the material, reducing effectiveness, and overall compatibility. Therefore, it is important for the compatibility and effect of anodization to be studied for any newly developed alloys. Recently developed eutectic Al–Ce alloys offer advantages like high castability, limited or no heat treatment requirements, and high-temperature strength retention. In this work, Al–Ce alloys are shown to have good compatibility with current processes and may exhibit improved adhesion of passivated layer because intermetallic phases anchor the anodized product to unconverted bulk. The source of these phenomena and their effect on material corrosion and layer adhesion properties of Al–Ce alloys will be discussed and compared with results from common commercial aluminum alloys.

Sims, Zachary↗

Observation of the Kaiser Effect Using Noble Gas Release Signals

The Kaiser effect was defined in the early 1950s (Kaiser 1953) and was extensively reviewed and evaluated by Lavrov (2002) with a view toward understanding stress estimations. The Kaiser effect is a stress memory phenomenon which has most often been demonstrated in rock using acoustic emissions. During cyclic loading–unloading–reloading, the acoustic emissions are near zero until the load exceeds the level of the previous load cycle. Here, we sought to explore the Kaiser effect in rock using real-time noble gas release. Laboratory studies using real-time mass spectrometry measurements during deformation have quantified, to a degree, the types of gases released (Bauer et al. 2016a, b), their release rates and amounts during deformation, estimates of permeability created from pore structure modifications during deformation (Gardner et al. 2017) and the impact of mineral plasticity upon gas release. We found that noble gases contained in brittle crystalline rock are readily released during deformation.

58 GEOSCIENCES↗

Creep Properties of Shale and Predicted Impact on Proppant Embedment for the Caney Shale, Oklahoma

The Caney shale is an emerging hydrocarbon play located in southwest Oklahoma, USA. Within the Caney shale exist facies which were initially dubbed “reservoir” and “ductile” based on evaluation of well logging data. While past work has shown the distinction of “brittle” and “ductile” is not mechanically justifiable according to formal definitions, here the current work shows some important differences between nominally ductile and reservoir zones. First, the “ductile” zones are more clay rich and have textural differences which can be expected to lead to differences in mechanical properties. One important impact of these differences is observed in triaxial creep experiments showing the “ductile” zones are more prone to creep deformation. Numerical simulations predict the “reservoir” zones will experience very little proppant embedment due to creep deformation of hydraulic fractures around proppant particles. On the other hand, “ductile” zones can be expected to undergo creep-driven proppant embedment leading to loss of fracture aperture ranging up to 100% loss, depending upon the spatial density of the proppant distribution. Hence, this research shows the identification of nominally “ductile” zones from well logs, while a misnomer, can be useful in finding clay-rich, creep-prone zones which will be the most prone to proppant embedment and hence vulnerable to greater production decline over time.

58 GEOSCIENCES↗

Peri-Net-Pro: the neural processes with quantified uncertainty for crack patterns

Abstract This paper develops a deep learning tool based on neural processes (NPs) called the Peri-Net-Pro, to predict the crack patterns in a moving disk and classifies them according to the classification modes with quantified uncertainties. In particular, image classification and regression studies are conducted by means of convolutional neural networks (CNNs) and NPs. First, the amount and quality of the data are enhanced by using peridynamics to theoretically compensate for the problems of the finite element method (FEM) in generating crack pattern images. Second, case studies are conducted with the prototype microelastic brittle (PMB), linear peridynamic solid (LPS), and viscoelastic solid (VES) models obtained by using the peridynamic theory. The case studies are performed to classify the images by using CNNs and determine the suitability of the PMB, LBS, and VES models. Finally, a regression analysis is performed on the crack pattern images with NPs to predict the crack patterns. The regression analysis results confirm that the variance decreases when the number of epochs increases by using the NPs. The training results gradually improve, and the variance ranges decrease to less than 0.035. The main finding of this study is that the NPs enable accurate predictions, even with missing or insufficient training data. The results demonstrate that if the context points are set to the 10th, 100th, 300th, and 784th, the training information is deliberately omitted for the context points of the 10th, 100th, and 300th, and the predictions are different when the context points are significantly lower. However, the comparison of the results of the 100th and 784th context points shows that the predicted results are similar because of the Gaussian processes in the NPs. Therefore, if the NPs are employed for training, the missing information of the training data can be supplemented to predict the results.

Mathematics↗

Molecular dynamics-based multiscale damage initiation model for CNT/epoxy nanopolymers

This study presents a methodology that accurately simulates the brittle behavior of epoxy polymers initiating at the molecular level due to bond elongation and subsequent bond dissociation. The system investigated in this study comprises a combination of crystalline carbon nanotubes (CNTs) dispersed in epoxy polymer molecules. Molecular dynamics (MD) simulations are performed with an appropriate bond order-based force field to capture deformation-induced bond dissociation between atoms within the simulation volume. During deformation, the thermal vibration of molecules causes the elongated bonds to re-equilibrate; thus, the effect of mechanical deformation on bond elongation and scission cannot be captured effectively. This issue is overcome by deforming the simulation volume at zero temperature—a technique adopted from the concept of quasi-continuum and demonstrated successfully in the authors’ previous work. Results showed that a combination of MD deformation tests with ultra-high strain rates at near-zero temperatures provides a computationally efficient alternative for the study of bond dissociation phenomenon in amorphous epoxy polymer. In this paper, the ultra-high strain rate deformation approach is extended to the CNT-epoxy system at various CNT weight fractions and the corresponding bond disassociation energy extracted from the simulation volume is used as input to a low-fidelity continuum damage mechanics (CDM) model to demonstrate the bridging of length scales and to study matrix failure at the microscale. The material parameters for the classical CDM model are directly obtained from physics-based atomistic simulations, thus improving the accuracy of the multiscale approach.

36 MATERIALS SCIENCE↗

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Amorphous flexible (co)polyesters with low glass transition temperature (T{sub g}) are very desirable in impact modification of biodegradable brittle polymers and synthesis of biodegradable elastomers. However, most flexible polyesters and binary copolyesters made from linear diacid(s) and diol(s) are crystalline polymers. In order to investigate the effect of monomer structure on the crystallization and T{sub g} of such copolyesters, novel ternary or multiple flexible copolyesters containing various structural units were designed and synthesized in this study, and characterized with {sup 1}HNMR, GPC, DSC, WAXD, TGA and tensile testing. Introducing aromatic diacid (especially asymmetric one) or short-chain branched diol is favorable to depress copolyester crystallization, and leads to higher T{sub g} at the same time. From easily crystallized to fully amorphous copolyesters with low T{sub g} were successfully synthesized by adopting different combination of structural units. In addition, the existence of aromatic structural unit in copolyesters is helpful to improve their tensile properties. Graphical Abstract: Flexible copolyesters containing various structural units were designed and synthesized. Introducing asymmetric, rigid aromatic or short-chain branched unit is favorable to depress copolyester crystallization, and leads to higher T{sub g} at the same time. Crystalline to fully amorphous copolyesters with low enough T{sub g} have been successfully synthesized by adjusting the structural units. .

36 MATERIALS SCIENCE↗

Transdermal Delivery of Nicotine Using Pectin Isolated from Durian Fruit-Hulls-Based Polymer Blends as a Matrix Layer

Many natural polymers with various chemical structures are used to prepare transdermal patches. Pectin is a one interesting type of polymer because it can control drug release when used in transdermal patches. In Thailand, the waste from durian fruit-hulls is a major problem for the environment. However, the pectin from it can be isolated under acid conditions and used to prepare transdermal patches for nicotine delivery which has not yet been reported. As the isolated pectin is a natural polymer, the film made from isolated pectin is a brittle; therefore, adding a low protein natural rubber latex (LPNRL) polymer was needed to increase its flexibility. The transdermal patches were amorphous and had T{sub g} values ranging from 81.0 to 93.3 °C. Moisture uptake, swelling ratio, and erosion values of the patches were significantly decreased after addition of LPNRL, which resulted in low hydrophilicity. The in vitro release and permeation of nicotine depends on the hydrophilicity of the patches. The kinetic models for in vitro release and permeation of nicotine were Higuchi model and zero order, respectively. In conclusion, pectin isolated from fruit-hulls of Mon Thong durians is an effective polymer to control the release of nicotine. It also is an option that could solve the environmental problems caused by durian fruit-hulls waste.

36 MATERIALS SCIENCE↗

Use of Isolated Pectin from a Cissampelos pareira-Based Polymer Blend Matrix for the Transdermal Delivery of Nicotine

Pectin is a natural biopolymer, and a major component of a complex heterogeneous polysaccharide found in the primary cell walls and middle lamella of plant tissues. This paper used pectin isolated from Cissampelos pareira (Krueo Ma Noy) leaves to prepare the matrix layer for nicotine transdermal patches. However, the patch was a brittle film, thus, deproteinized natural rubber latex (DNRL) was blended to improve flexibility of the patch. Here we present for the first time a preparation study exploring the suitability of isolated pectin blends to serve as drug carriers and the mechanism controlling the release patterns of nicotine. The hydrophilicity of the patches was found to decrease when increasing the DNRL ratio. Differential scanning calorimetry and X-ray diffraction experiments were used to characterize the interactions between the investigated drugs and the matrix polymers. In vitro studies showed that the isolated pectin blends were an effective matrix for controlled nicotine release. The release and permeation patterns of nicotine depend on the hydrophilicity of the patches. The kinetic models of nicotine were found to be a Higuchi model and zero order for in vitro release and skin permeation, respectively.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Preparation of nanofibrillated cellulose and application in reinforced PLA/starch nanocomposite film

Polylactic acid (PLA), one of the most promising biopolymers with exceptional properties, is being used in a wide variety of applications in diverse fields. However, low degradation rate, relatively high cost and inherently high brittleness of PLA severely hamper its further development, particularly in functional nanocomposites for bio-based packaging. In the present work, green, biodegradable and reinforced PLA-based nanocomposite films were designed and prepared, where starch was incorporated for reducing the overall cost of nanocomposites for large-scale application, and nanofibrillated cellulose (NFC) isolated from microcrystalline cellulose (MCC) via a completely green process was employed as a reinforcing phase. Initially, the morphology structure and dimension of the NFC samples isolated by high-pressure homogenization (HPH) coupled with hot water pretreatment were characterized using SEM, FT-IR, XRD, and laser scattering particle analyzer. Moreover, the effect of NFC loadings on the rheological behavior of the PLA based nanocomposite suspensions and the overall properties of the corresponding nanocomposite films were investigated. Results indicated that increased NFC loadings reduced the shear viscosity and shear stress of the nanocomposite suspensions. Furthermore, the desired PLA/starch/NFC nanocomposite films were found to exhibit improved tensile strength, Young’s modulus and reduced air permeability in comparison to pure PLA/starch films. This work offered an effective route for the preparation of biodegradable and reinforced PLA-based nanocomposite films, which may be promising bio-nanocomposite materials for food packaging applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Electronic, Magnetic and Optical Investigations of Half-Heusler Compounds YZSb (Z = Cr, Mn): FP-LAPW Method

Half-Heusler compounds YZSb (Z = Cr, Mn) are theoretically explored in the framework of density functional theory (DFT). We have investigated a number of different properties with the help of the WIEN2k simulation package. Equilibrium lattice constants fall in the range 6.0–7.0 Å for both compounds. Elastic properties are also studied and it is found that the compound YCrSb is of brittle and YMnSb is of ductile nature as indicated by a number of parameters including Cauchy pressure, Pugh’s ratio and Poisson’s ratio. Electronically, these compounds are found to be half-metals as their spin-up states are semiconducting and hence 100% spin polarized at the Fermi level while spin-down states are conducting. The total magnetic moments are equal to 4μ{sub B} and 3.15μ{sub B} for YCrSb and YMnSb, respectively. The optical properties including dielectric function, reflectivity, refractive index, conductivity and absorption coefficients are calculated and discussed. Optical characteristics of the compounds hint that they are more active in the infrared region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Density Functional Theory Investigations of Half-Heusler Compounds RhVZ (Z = P, As, Sb)

We have studied the half-Heusler compounds RhVZ (Z = P, As, Sb) using Density Functional Theory (DFT). The method of the Full Potential Linearly Augmented Plane Wave (FP-LAPW) is employed in the Wien2k package for calculation of structural, elastic, mechanical, electronic, magnetic, and optical properties. Lattice constants are found in the range 5.67 − 5.80 Å. Analysis of elastic properties shows that two of the compounds namely RhVP and RhVAs are ductile while RhVSb is brittle in nature. All three compounds are half-metals as revealed from the band structures and Density of States (DoS) calculations. In all of them, spin-down channels have the small band gaps, while spin-up channels are conducting. These compounds follow the Slater-Pauling 18 (M{sub Tot} = Z{sub Tot} − 18) electron rule with the total magnetic moments in the range 1 − 2 μ{sub B}. Optical properties like dielectric function, refractive index, reflectivity, conductivity, and absorption coefficient are calculated and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗