Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BATTERIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Two-Dimensional Holey Co 3 O 4 Nanosheets for High-Rate Alkali-Ion Batteries: From Rational Synthesis to in Situ Probing

A general template-directed strategy is developed for the controlled synthesis of two-dimensional (2D) assembly of Co 3 O 4 nanoparticles (ACN) with unique holey architecture and tunable hole sizes that enable greatly improved alkali-ion storage properties (demonstrated for both Li and Na ion storage). The as-synthesized holey ACN with 10 nm holes exhibit excellent reversible capacities of 1324 mAh/g at 0.4 A/g and 566 mAh/g at 0.1 A/g for Li and Na ion storage, respectively. The improved alkali-ion storage properties are attributed to the unique interconnected holey framework that enables efficient charge/mass transport as well as accommodates volume expansion. In situ TEM characterization is employed to depict the structural evolution and further understand the structural stability of 2D holey ACN during the sodiation process. The results show that 2D holey ACN maintained the holey morphology at different sodiation stages because Co 3 O 4 are converted to extremely small interconnected Co nanoparticles and these Co nanoparticles could be well dispersed in a Na 2 O matrix. These extremely small Co nanoparticles are interconnected to provide good electron pathway. In addition, 2D holey Co 3 O 4 exhibits small volume expansion (~6%) compared to the conventional Co 3 O 4 particles. The 2D holey nanoarchitecture represents a promising structural platform to address the restacking and accommodate the volume expansion of 2D nanosheets for superior alkali-ion storage.

2D holey assembly of nanoparticles↗

Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging

Lithium-rich layered oxides (LRLO) are among the leading candidates for the next-generation cathode material for energy storage, delivering 50% excess capacity over commercially used compounds. Despite excellent prospects, voltage fade has prevented effective use of the excess capacity, and a major challenge has been a lack of understanding of the mechanisms underpinning the voltage fade. Here, using operando three-dimensional Bragg coherent diffractive imaging, we directly observe the nucleation of a mobile dislocation network in LRLO nanoparticles. The dislocations form more readily in LRLO as compared with a classical layered oxide, suggesting a link between the defects and voltage fade. We show microscopically how the formation of partial dislocations contributes to the voltage fade. The insights allow us to design and demonstrate an effective method to recover the original high-voltage functionality. Furthermore, our findings reveal that the voltage fade in LRLO is reversible and call for new paradigms for improved design of oxygen-redox active materials.

25 ENERGY STORAGE↗

Polysulfide Speciation in the Bulk Electrolyte of a Lithium Sulfur Battery

In situ Raman microscopy was used to study polysulfide speciation in the bulk ether electrolyte during the discharge and charge of a Li-S electrochemical cell to assess the complex interplay between chemical and electrochemical reactions in solution. During discharge, long chain polysulfides and the S 3 - radical appear in the electrolyte at 2.4 V indicating a rapid equilibrium of the dissociation reaction to form S 3 - . When charging, however, an increase in the concentration of all polysulfide species was observed. This highlights the importance of the electrolyte to sulfur ratio and suggests a loss in the useful sulfur inventory from the cathode to the electrolyte.

25 ENERGY STORAGE↗

Kinetics of Nanoparticle Interactions in Battery Electrodes

Nanoparticles with a tendency to phase separate interact with each other during a process of either intraparticle phase separation (occurring inside the particle) or interparticle phase separation (occurring between particles). In this paper, we examine a halfcell consisting of two particles to systematically analyze the particle interactions and their resulting voltage response at different insertion currents. The kinetics of the interactions between nanoparticles is studied for cases in which particles undergo interparticle and intraparticle phase separation. Our results indicate that the interactions between particles in a cell containing only particles that undergo intraparticle phase separation are similar to those in a cell containing only particles that undergo interparticle phase separation. In both cases, sequential transformation occurs at low currents, whereas a simultaneous transformation occurs at high currents. Furthermore, such transformation dynamics changes in cases where the cell contains a mixture of particles that undergo interparticle and intraparticle phase separations, which exhibits more complex dynamics.

25 ENERGY STORAGE↗

Hybrid Ag 2 VO 2 PO 4 /CF x as a High Capacity and Energy Cathode for Primary Batteries

In this report, we describe the electrochemistry of hybrid dual silver vanadium phosphorus oxide/carbon fluoride (Ag 2 VO 2 PO 4 /CF x ) cathodes with various weight ratios. Through modification of the Ag 2 VO 2 PO 4 /CF x ratio, we can control the gravimetric and volumetric capacity, as well as mitigate the voltage drop during high current pulses. The increase in impedance caused by irreversible LiF formation in CFx was reduced by the silver reduction-displacement during electrochemical discharge of the Ag 2 VO 2 PO 4 . Moreover, the addition of graphite was shown to reduce initial voltage delay. When Ag 2 VO 2 PO 4 dominates the electrode mass (i.e. 75/25 Ag 2 VO 2 PO 4 /CF x ) in the hybrid cathode, pulse testing shows less voltage drop and delay, but at the expense of capacity and energy density. As the amount of CFx in the composite increases (i.e. Ag 2 VO 2 PO 4 /CF x ratio of to 50/50 or 25/75), charge capacity and energy density increases, but at the expense of larger voltage drops and delays early in the discharge process. Thus, controlling the Ag 2 VO 2 PO 4 /CF x ratio can be used to tune the electrochemical properties of the dual cathode, allowing for optimization of capacity and power depending on the application.

25 ENERGY STORAGE↗

Exceptionally High Ionic Conductivity in Na 3 P 0.62 As 0.38 S 4 with Improved Moisture Stability for Solid-State Sodium-Ion Batteries

A Na-ion solid-state electrolyte, Na 3 P 0.62 As 0.38 S 4 , is developed with an exceptionally high conductivity of 1.46 mS cm -1 at 25 degrees C and enhanced moisture stability. Dual effects of alloying element As (lattice expansion and a weaker As. S bond strength) are responsible for the superior conductivity. Improved moisture stability is regulated by shifting low-energy moisture reactions to high-energy ones due to As.

Yu, Zhaoxin↗