Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANALOG SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Laboratory Studies of the Optical Properties and Condensation Processes of Cosmic Dust Particles

A laboratory facility for levitating single isolated dust particles in an electrodynamics balance has been developing at NASA/Marshall Space Flight Center for conducting a variety of experimental, of astrophysical interest. The objective of this research is to employ this innovative experimental technique for studies of the physical and optical properties of the analogs of cosmic grains of 0.2-10 micron size in a chamber with controlled pressure/temperatures simulating astrophysical environments. In particular, we will carry out three classes of experiments to investigate the microphysics of the analogs of interstellar and interplanetary dust grains. (1) Charge characteristics of micron size single dust grains to determine the photoelectric efficiencies, yields, and equilibrium potentials when exposed to UV radiation. These measurements will provide the much-needed photoelectric emission data relating to individual particles as opposed to that for the bulk materials available so far. (2) Infrared optical properties of dust particles obtained by irradiating the particles with radiation from tunable infrared diode lasers and measuring the scattered radiation. Specifically, the complex refractive indices, the extinction coefficients, the scattering phase functions, and the polarization properties of single dust grains of interest in interstellar environments, in the 1-25 micron spectral region will be determined. (3) Condensation experiments to investigate the deposition of volatile gases on colder nucleated particles in dense interstellar clouds and lower planetary atmospheres. The increase in the mass or m/q ratio due to condensation on the particle will be monitored as a function of the dust particle temperature and the partial pressure of the injected volatile gas. The measured data wild permit determination of the sticking efficiencies of volatile gases of astrophysical interest. Preliminary results based on photoelectric emission experiments on 0.2-6.6 micron size silica particles exposed to UV radiation in the 120-200 nm spectral region will be presented.

Abbas, Mian M.↗

Holographic Quantum Simulation of Strongly Correlated Electron Systems

The project aimed to demonstrate a new holographic quantum simulation approach and co‐ designed quantum hardware to tackle three specific problems that fall within the broad umbrella of unraveling the physics of strongly correlated electron systems (SCES). These tasks were: (1) holographic preparation of ground‐ and thermal‐ states of correlated magnetic and electronic systems including quasi‐2d frustrated‐spin, Fermi‐Hubbard, and fractional quantum Hall (FQH) systems, (2) holographic‐simulation of long‐time out‐of‐equilibrium dynamics and (3) holographic analogs of embedding methods such as dynamical mean‐ field theory (DMFT) and density‐matrix embedding theory (DMET) to solve systems with complex structure or long‐range interactions. These tasks are prototypes for the kinds of material simulation problems of interest to BES, such as the simulation of multiferroic materials, perovskite photovoltaics and high‐temperature superconductors, that tax the capabilities of the most powerful classical supercomputers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gravity-Assist Mechanical Simulator for Outreach

There is no convenient way to demonstrate mechanically, as an outreach (or inreach) topic, the angular momentum trade-offs and the conservation of angular momentum associated with gravityassist interplanetary trajectories. The mechanical concepts that underlie gravity assist are often misunderstood or confused, possibly because there is no mechanical analog to it in everyday experience. The Gravity Assist Mech - anical Simulator is a hands-on solution to this longstanding technical communications challenge. Users intuitively grasp the concepts, meeting specific educational objectives. A manually spun wheel with high angular mass and low-friction bearings supplies momentum to an attached spherical neodymium magnet that represents a planet orbiting the Sun. A steel bearing ball following a trajectory across a glass plate above the wheel and magnet undergoes an elastic collision with the revolving magnet, illustrating the gravitational elastic collision between spacecraft and planet on a gravity-assist interplanetary trajectory. Manually supplying the angular momentum for the elastic collision, rather than observing an animation, intuitively conveys the concepts, meeting nine specific educational objectives. Many NASA and JPL interplanetary missions are enabled by the gravity-assist technique.

Doody, David F.↗

Hybrid quantum-classical approach for coupled-cluster Green's function theory

The three key elements of a quantum simulation are state preparation, time evolution, and measurement. While the complexity scaling of time evolution and measurements are well known, many state preparation methods are strongly system-dependent and require prior knowledge of the system's eigenvalue spectrum. Here, we report on a quantum-classical implementation of the coupled-cluster Green's function (CCGF) method, which replaces explicit ground state preparation with the task of applying unitary operators to a simple product state. While our approach is broadly applicable to many models, we demonstrate it here for the Anderson impurity model (AIM). The method requires a number of T gates that grows as O ( N 5 ) per time step to calculate the impurity Green's function in the time domain, where N is the total number of energy levels in the AIM. Since the number of T gates is analogous to the computational time complexity of a classical simulation, we achieve an order of magnitude improvement over a classical CCGF calculation of the same order, which requires O ( N 6 ) computational resources per time step.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trends in Covalency for d- and f-Element Metallocene Dichlorides Identified Using Chlorine K-Edge X-Ray Absorption Spectroscopy and Time Dependent-Density Functional Theory

We describe the use of Cl K-edge X-ray Absorption Spectroscopy (XAS) and both ground state and time-dependent hybrid density functional theory (DFT) to probe electronic structure and determine the degree of orbital mixing in M-Cl bonds for (C5Me5)2MCl2 (M = Ti, 1; Zr, 2; Hf, 3; Th, 4; and U, 5), where we can directly compare a class of structurally similar compounds for d- and f-elements. We report direct experimental evidence for covalency in M-Cl bonding, including actinides, and offer insight into the relative roles of the valence f- and dorbitals in these systems. The Cl K-edge XAS data for the group IV transition metals, 1 – 3, show slight decreases in covalency in M-Cl bonding with increasing principal quantum number, in the order Ti > Zr > Hf. The percent Cl 3p character per M-Cl bond was experimentally determined to be 25, 23, and 22% per M-Cl bond for 1-3, respectively. For actinides, we find a shoulder on the white line for (C5Me5)2ThCl2, 4, and distinct, but weak pre-edge features for 2 (C5Me5)2UCl2, 5. The percent Cl 3p character in Th-Cl bonds in 4 was determined to be 14 %, with high uncertainty, while the U-Cl bonds in 5 contains 9 % Cl 3p character. The magnitudes of both values are approximately half what was observed for the transition metal complexes in this class of bent metallocene dichlorides. Using the hybrid DFT calculations as a guide to interpret the experimental Cl K-edge XAS, these experiments suggest that when evaluating An- Cl bonding, both 5f- and 6d-orbitals should be considered. For (C5Me5)2ThCl2, the calculations and XAS indicate that the 5f- and 6d-orbitals are nearly degenerate and heavily mixed. In contrast, the 5f- and 6d-orbitals in (C5Me5)2UCl2 are no longer degenerate, and fall in two distinct energy groupings. The 5f-orbitals are lowest in energy and split into a 5-over-2 pattern with the high lying U 6d-orbitals split in a 4-over-1 pattern, the latter of which is similar to the dorbital splitting in group IV transition metal (C5R5)2MCl2 (R = H, Me) compounds. Time dependent-DFT (TD-DFT) was used to calculate the energies and intensities of Cl 1s transitions into empty metal based orbitals containing Cl 3p character, and provide simulated Cl K-edge XAS spectra for 1 - 4. However, for 5, which has two unpaired electrons, analogous information was obtained from transition dipole calculations using ground state Kohn-Sham orbitals. The simulations provide additional confidence in the interpretation of spectra based on ground state calculations. Overall, this study demonstrates that Cl K-edge XAS and DFT calculations represent powerful tools that can be used to evaluate electronic structure and covalency in actinide metal-ligand bonding. In addition, these results provide a framework that can be used in future studies to evaluate actinide covalency in compounds that contain transuranic elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CrossSim

CrossSim is a simulator for modeling neural-inspired machine learning algorithms on analog hardware, such as resistive memory crossbars. It includes noise models for reading and updating the resistances, which can be based on idealized equations or experimental data. It can also introduce noise and finite precision effects when converting values from digital to analog and vice versa. All of these effects can be turned on or off as an algorithm processes a data set and attempts to learn its salient attributes so that it can be categorized in the machine learning training/classification context. CrossSim thus allows the robustness, accuracy, and energy usage of a machine learning algorithm to be tested on simulated hardware.

Plimpton, StevenJ.↗

Ground-state entanglement in a system with many-body interactions

Entanglement refers to the inability of many-body quantum mechanical systems to be separated into independent subsystems. This has been well investigated in systems consisting of two entangled subsystems. In larger systems, more complex types of entanglement exist. In a system consisting of three subsystems (e.g., qubits), it is possible that all three subsystems are entangled with each other in a way that cannot be reduced to bipartite entanglement, and it is known that two different, inequivalent forms of tripartite entanglement exist such as the GHZ and W states (GHZ denotes 'Greenberger-Horne-Zeilinger'). Here, we investigate a particularly interesting system with competing one-, two-, and three-body interactions. Its ground state can be a product state, a GHZ state, or a W state, depending on the type and strength of the spin-spin couplings. By varying an external control parameter, the system can be made to undergo quantum transitions between the various ground-state-entanglement phases. We implement the system in an NMR quantum simulator and use adiabatic evolution of the effective Hamiltonian to drive the system through the quantum transitions. In the experimental and numerical simulations, we check the suitability of different observables for making the quantum transitions visible and for characterizing the different phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Programmable solar array simulator.

Operational and circuit features of laboratory device built to simulate dynamic electrical output characteristics of programmable solar array in orbital flight

ANALOG COMPUTER↗

An Analysis of DES Cluster Simulations through the IMCAT and Shapelets Weak Lensing Pipelines

We have run two completely independent weak lensing analysis pipelines on a set of realistic simulated images of a massive galaxy cluster with a singular isothermal sphere profile (galaxy velocity dispersion sigma_v=1250 km/ sec). The suite of images was constructed using the simulation tools developed by the Dark Energy Survey. We find that both weak lensing pipelines can accurately recover the velocity dispersion of our simulated clusters, suggesting that current weak lensing tools are accurate enough for measuring the shear profile of massive clusters in upcoming large photometric surveys. We also demonstrate how choices of some cuts influence the final shear profile and sigma_v measurement. Analogously to the STEP program, we make all of these cluster simulation images publically available for other groups to analyze through their own weak lensing pipelines.

Gill, M. S.S.↗

Application of Simulated Annealing and Related Algorithms to TWTA Design

Simulated Annealing (SA) is a stochastic optimization algorithm used to search for global minima in complex design surfaces where exhaustive searches are not computationally feasible. The algorithm is derived by simulating the annealing process, whereby a solid is heated to a liquid state and then cooled slowly to reach thermodynamic equilibrium at each temperature. The idea is that atoms in the solid continually bond and re-bond at various quantum energy levels, and with sufficient cooling time they will rearrange at the minimum energy state to form a perfect crystal. The distribution of energy levels is given by the Boltzmann distribution: as temperature drops, the probability of the presence of high-energy bonds decreases. In searching for an optimal design, local minima and discontinuities are often present in a design surface. SA presents a distinct advantage over other optimization algorithms in its ability to escape from these local minima. Just as high-energy atomic configurations are visited in the actual annealing process in order to eventually reach the minimum energy state, in SA highly non-optimal configurations are visited in order to find otherwise inaccessible global minima. The SA algorithm produces a Markov chain of points in the design space at each temperature, with a monotonically decreasing temperature. A random point is started upon, and the objective function is evaluated at that point. A stochastic perturbation is then made to the parameters of the point to arrive at a proposed new point in the design space, at which the objection function is evaluated as well. If the change in objective function values (Delta)E is negative, the proposed new point is accepted. If (Delta)E is positive, the proposed new point is accepted according to the Metropolis criterion: rho((Delta)f) = exp((-Delta)E/T), where T is the temperature for the current Markov chain. The process then repeats for the remainder of the Markov chain, after which the temperature is decremented and the process repeats. Eventually (and hopefully), a near-globally optimal solution is attained as T approaches zero. Several exciting variants of SA have recently emerged, including Discrete-State Simulated Annealing (DSSA) and Simulated Tempering (ST). The DSSA algorithm takes the thermodynamic analogy one step further by categorizing objective function evaluations into discrete states. In doing so, many of the case-specific problems associated with fine-tuning the SA algorithm can be avoided; for example, theoretical approximations for the initial and final temperature can be derived independently of the case. In this manner, DSSA provides a scheme that is more robust with respect to widely differing design surfaces. ST differs from SA in that the temperature T becomes an additional random variable in the optimization. The system is also kept in equilibrium as the temperature changes, as opposed to the system being driven out of equilibrium as temperature changes in SA. ST is designed to overcome obstacles in design surfaces where numerous local minima are separated by high barriers. These algorithms are incorporated into the optimal design of the traveling-wave tube amplifier (TWTA). The area under scrutiny is the collector, in which it would be ideal to use negative potential to decelerate the spent electron beam to zero kinetic energy just as it reaches the collector surface. In reality this is not plausible due to a number of physical limitations, including repulsion and differing levels of kinetic energy among individual electrons. Instead, the collector is designed with multiple stages depressed below ground potential. The design of this multiple-stage collector is the optimization problem of interest. One remaining problem in SA and DSSA is the difficulty in determining when equilibrium has been reached so that the current Markov chain can be terminated. It has been suggested in recent literature that simulating the thermodynamic properties opecific heat, entropy, and internal energy from the Boltzmann distribution can provide good indicators of having reached equilibrium at a certain temperature. These properties are tested for their efficacy and implemented in SA and DSSA code with respect to TWTA collector optimization.

Radke, Eric M.↗

Effects of Microsecond Pulse Laser Irradiation on Vis-NIR Reflectance Spectrum of Carbonaceous Chondrite Simulant: Implications for Martian Moons and Primitive Asteroids

Goal of this study is to make a progress in understanding the optical effects of space weathering on small bodies believed to be similar in composition to carbonaceous chondrites: C, G, B, F, T, D, and P asteroids and possibly Martian satellites Phobos and Deimos. The companion work focuses on petrological and mineralogical aspects of this process. One of the main factors of space weathering is meteorite and micrometeorite bombardment leading, in particular, to impact melting of components of the regolith. Studies of lunar regolith and laboratory experiments simulating impact melting show that the melting products differ from the unmelted material in mineralogy and distribution of chemical components among different phases that results in spectral changes. We simulate impact melting of CM chondrite by pulse laser irradiation of an artificial analog of such a meteorite. The analog is a mixture of 46 wt.% non-magnetic fraction of L5 ordinary chondrite Tsarev, 47 wt.% serpentine, 5 wt.% kerite, and 2 wt.% calcite. It simulates rather well bulk chemistry, including volatiles such as H2O and CO2, and only approximately the CM chondrite mineralogy. Thus, we do not expect the mixture to be spectrally similar to CM chondrites, but expect the laser melting products to be similar to those formed by impact melting of natural CM chondrites.

Hiroi, T.↗

Closed-Loop HIRF Experiments Performed on a Fault Tolerant Flight Control Computer

ABSTRACT Closed-loop HIRF experiments were performed on a fault tolerant flight control computer (FCC) at the NASA Langley Research Center. The FCC used in the experiments was a quad-redundant flight control computer executing B737 Autoland control laws. The FCC was placed in one of the mode-stirred reverberation chambers in the HIRF Laboratory and interfaced to a computer simulation of the B737 flight dynamics, engines, sensors, actuators, and atmosphere in the Closed-Loop Systems Laboratory. Disturbances to the aircraft associated with wind gusts and turbulence were simulated during tests. Electrical isolation between the FCC under test and the simulation computer was achieved via a fiber optic interface for the analog and discrete signals. Closed-loop operation of the FCC enabled flight dynamics and atmospheric disturbances affecting the aircraft to be represented during tests. Upset was induced in the FCC as a result of exposure to HIRF, and the effect of upset on the simulated flight of the aircraft was observed and recorded. This paper presents a description of these closed- loop HIRF experiments, upset data obtained from the FCC during these experiments, and closed-loop effects on the simulated flight of the aircraft.

Belcastro, Celeste M.↗

Rapid Composting of Crop Space Waste

This project processed multiple types of waste simulant feedstocks using commercial composting units and NASA Trash-to-Gas (TtG) technology processing units to see what solids, liquids, and gases could be recovered. The feedstock waste included inedible biomass, mission waste from the Johnson Space Center (JSC) Crew Health and Performance Exploration Analog (CHAPEA), Mars analog, and the long duration Orbital Syngas/Commodity Augmentation Reactor (OSCAR) Waste Simulant (OWS) and OSCAR Full Scale (FS) (also referred to as Mars 850-day mission waste simulant). The performance data was collected, and overall performance of the waste processing systems, as well as elemental analysis of the product yields for enabling Lunar and Martian regolith mixtures in a crop grow-out study, were performed. Germination took place in certain Lunar and Martian regolith studies, with promising preliminary results that TtG solid products can be used as plant nutrients to enable crop growth in off-world regolith simulants.

Anne Meier↗

ON THE FREQUENCY OF JUPITER ANALOGS

The Anglo-Australian Planet Search has now accumulated 12 years of radial-velocity data with long-term instrumental precision better than 3 m s{sup -1}. In this paper, we expand on earlier simulation work, to probe the frequency of near-circular, long-period gas-giant planets residing at orbital distances of 3-6 AU-the so-called Jupiter analogs. We present the first comprehensive analysis of the frequency of these objects based on radial-velocity data. We find that 3.3% of stars in our sample host Jupiter analogs; detailed, star-by-star simulations show that no more than 37% of stars host a giant planet between 3 and 6 AU.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum walks and quantum simulations with Bloch-oscillating spinor atoms

We propose a scheme for the realization of a quantum walker and a quantum simulator for the Dirac equation with ultracold spinor atoms in driven optical lattices. A precise control of the dynamics of the atomic matter wave can be realized using time-dependent external forces. If the force depends on the spin state of the atoms, the dynamics will entangle the inner and outer degrees of freedom, which offers unique opportunities for quantum information and quantum simulation. Here we introduce a method to realize a quantum walker based on the state-dependent transport of spinor atoms and a coherent driving of the internal state. In the limit of weak driving the dynamics are equivalent to that of a Dirac particle in 1+1 dimensions. Thus it becomes possible to simulate relativistic effects such as Zitterbewegung and Klein tunneling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integral equation theory of thermodynamics, pair structure, and growing static length scale in metastable hard sphere and Weeks-Chandler-Andersen fluids

Here, we employ the Ornstein-Zernike integral equation theory with the Percus-Yevick (PY) and modified-Verlet (MV) closures to study the equilibrium structural and thermodynamic properties of metastable monodisperse hard sphere and continuous repulsion Weeks-Chandler-Andersen (WCA) fluids under density and temperature conditions where the system is strongly overcompressed or supercooled, respectively. The theoretical results are compared to crystal-avoiding simulations of these dense monodisperse model one-component fluids. The equation of state (EOS) and dimensionless compressibility are computed using both the virial and compressibility routes. For hard spheres, the MV-based virial route EOS and dimensionless compressibility are in very good agreement with simulation for all packing fractions, much better than the PY analogs. The corresponding MV-based predictions for the static structure factor are also very good. The amplitude of density fluctuations on the local cage scale and in the long wavelength limit, and three technically different measures of the density correlation length, are studied with both closures. All five properties grow in a roughly exponential manner with density in the metastable regime up to packing fractions of 58% with no sign of saturation. The MV-based results are in good agreement with our crystal-avoiding simulations. Interestingly, the density dependences of long and short wavelength quantities are closely related. The MV-based theory is also quite accurate for the thermodynamics and structure of supercooled monodisperse WCA fluids. Overall our findings are also relevant as critical input to microscopic theories that relate the equilibrium pair correlation function or static structure factor to dynamical constraints, barriers, and activated relaxation in glass-forming liquids.

36 MATERIALS SCIENCE↗

The Life Cycle Application of Intelligent Software Modeling for the First Materials Science Research Rack

Marshall Space Flight Center (MSFC) has been funding development of intelligent software models to benefit payload ground operations for nearly a decade. Experience gained from simulator development and real-time monitoring and control is being applied to engineering design, testing, and operation of the First Material Science Research Rack (MSRR-1). MSRR-1 is the first rack in a suite of three racks comprising the Materials Science Research Facility (MSRF) which will operate on the International Space Station (ISS). The MSRF will accommodate advanced microgravity investigations in areas such as the fields of solidification of metals and alloys, thermo-physical properties of polymers, crystal growth studies of semiconductor materials, and research in ceramics and glasses. The MSRR-1 is a joint venture between NASA and the European Space Agency (ESA) to study the behavior of different materials during high temperature processing in a low gravity environment. The planned MSRR-1 mission duration is five (5) years on-orbit and the total design life is ten (IO) years. The MSRR-1 launch is scheduled on the third Utilization Flight (UF-3) to ISS, currently in February of 2003). The objective of MSRR-1 is to provide an early capability on the ISS to conduct material science, materials technology, and space product research investigations in microgravity. It will provide a modular, multi-user facility for microgravity research in materials crystal growth and solidification. An intelligent software model of MSRR-1 is under development and will serve multiple purposes to support the engineering analysis, testing, training, and operational phases of the MSRR-1 life cycle development. The G2 real-time expert system software environment developed by Gensym Corporation was selected as the intelligent system shell for this development work based on past experience gained and the effectiveness of the programming environment. Our approach of multi- uses of the simulation model and its intuitive graphics capabilities is providing a concurrent engineering environment for rapid prototyping and development. Operational schematics of the MSRR-1 electrical, thermal control, vacuum access, and gas supply systems, and furnace inserts are represented graphically in the environment. Logic to represent first order engineering calculations is coded into the knowledge base to simulate the operational behavior of the MSRR-1 systems. An example of engineering data provided includes electrical currents, voltages, operational power, temperatures, thermal fluid flow rates. pressures, and component status indications. These type of data are calculated and displayed at appropriate instrumentation points, and the schematics are animated to reflect the simulated operational status of the MSRR-1. The software control functions are also simulated to represent appropriate operational behavior based on automated control and response to commands received by the crew or ground controllers. The first benefit of this simulation environment is being realized in the high fidelity engineering analysis results from the electrical power system G2 model. Secondly, the MSRR-1 simulation model will be embedded with a hardware mock-up of the MSRR-1 to provide crew training on MSRR-1 integrated payload operations. G2 gateway code will output the simulated instrumentation values, termed as telemetry, in a flight-like data stream so that the crew has realistic and accurate simulated MSRR-1 data on the flight displays which will be designed for crew use. The simulation will also respond appropriately to crew or ground initiated commands, which will be part of normal facility operations. A third use of the G2 model is being planned; the MSRR-1 simulation will be integrated with additional software code as part of the test configuration of the primary onboard computer, or Master Controller, for MSRR-1. We will take advantage of the G2 capability to simulate the flight like data stream to test flight software responses and behavior. A fourth use of the G2 model will be to train the Ground Support Personnel that will monitor the MSRR-1 systems and payloads while they are operating aboard the ISS. The intuitive, schematic based environment will provide an excellent foundation for personnel to understand the integrated configuration and operation of the MSRR-1, and the anticipated telemetry feedback based on operational modes of the equipment. Expert monitoring features will be enhanced to provide a smart monitoring environment for the operators. These features include: (1) Animated, intuitive schematic-based displays which reflect telemetry values, (1) Real-time plotting of simulated or incoming sensor values, (3) High/Low exception monitoring for analog data, (4) Expected state monitoring for discrete data, (5) Data trending, (6) Automated malfunction procedure execution to diagnose problems, (7) Look ahead capability to planned MSRR-1 activities in the onboard timeline. And finally, the logic to calculate telemetry values will be deactivated, and the same environment will interface to the incoming data for the real-time telemetry stream to schematically represent the onboard hardware configuration. G2 will be the foundation for the real-time monitoring and control environment. In summary, our MSRR-1 simulation model spans many elements of the life cycle development of this project: Engineering Analysis, Test and Checkout, Training of Crew and Ground Personnel, and Real-time monitoring and control. By utilizing the unique features afforded by an expert system development environment, we have been able to synergize a powerful tool capable of addressing our project needs at every phase of project development.

Rice, Amanda↗