Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALTERNATIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Maximizing oil production from water alternating gas (CO 2 ) injection into residual oil zones: The impact of oil saturation and heterogeneity

Residual oil zones (ROZs) are widespread reservoirs, characterized by oil at residual saturation, either underlying oil fields (brownfield) or lateral (greenfield) to such fields. These reservoirs have the potential to produce volumes of oil sufficiently significant to make appreciable impacts on the US’s oil reserves and associated incidental CO 2 sequestration. The objective of this study is to improve our understanding the impact of heterogeneous and low oil saturations, in brownfield ROZs, on the effectiveness of water alternating gas (WAG) injection strategies. ROZs occur in the Permian Basin and elsewhere, and operators are using CO 2 injection for enhanced oil recovery (EOR) in these zones. The consensus model for the formation of ROZs is that they were formed by the effect of faster regional aquifer flow, acting over millions of years. Both the magnitude of oil saturation and the spatial distribution of oil differ from water-flooded main pay zones (MPZs). To explore the most effective injection strategies, we conducted simulations of CO 2 injection into synthetic geologic reservoirs. These simulations focused on injection into reservoirs subject to either man-made waterflooding or long-term natural waterflooding. By exploring the impact of varying: oil saturation; well patterns; reservoir heterogeneity; and permeability anisotropy, we attempt to quantify the factors that most influence the effectiveness of WAG injection. WAG ratios (the ratio of injected water and CO 2 , in reservoir volumes) of interest are those that either minimize the net CO 2 utilization ratios or maximize oil production rates. In general, the most effective WAG ratios for ROZs, are consistently less than those observed undergoing CO 2 injection in the same geologic reservoir models after traditional (man-made) waterflooding. This work demonstrates that most favorable WAG ratios for oil production in ROZs are different from those in traditional MPZs because of oil saturation differences. Therefore, CO 2 injection into both zones or directly copying WAG injection designs from MPZs to ROZs might not maximize oil production.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2024

Characterization of alternate encounter assemblies of SARS-CoV-2 main protease

The assembly of two monomeric constructs spanning segments 1-199 (MPro 1-199 ) and 10-306 (MPro 10-306 ) of SARS-CoV-2 main protease (MPro) was examined to assess the existence of a transient heterodimer intermediate in the N-terminal autoprocessing pathway of MPro model precursor. Together, they form a heterodimer population accompanied by a 13-fold increase in catalytic activity. Addition of inhibitor GC373 to the proteins increases the activity further by ~7-fold with a 1:1 complex and higher order assemblies approaching 1:2 and 2:2 molecules of MPro 1-199 and MPro 10-306 detectable by analytical ultracentrifugation and native mass estimation by light scattering. Assemblies larger than a heterodimer (1:1) are discussed in terms of alternate pathways of domain III association, either through switching the location of helix 201 to 214 onto a second helical domain of MPro 10-306 and vice versa or direct interdomain III contacts like that of the native dimer, based on known structures and AlphaFold 3 prediction, respectively. At a constant concentration of MPro 1-199 with molar excess of GC373, the rate of substrate hydrolysis displays first order dependency on the MPro 10-306 concentration and vice versa. An equimolar composition of the two proteins with excess GC373 exhibits half-maximal activity at ~6 μM MPro 1-199 . Catalytic activity arises primarily from MPro 1-199 and is dependent on the interface interactions involving the N-finger residues 1 to 9 of MPro 1-199 and E290 of MPro 10-306 . Importantly, our results confirm that a single N-finger region with its associated intersubunit contacts is sufficient to form a heterodimeric MPro intermediate with enhanced catalytic activity.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2012

A new green phosphor of SrAl{sub 2}O{sub 4}:Eu{sup 2+},Ce{sup 3+},Li{sup +} for alternating current driven light-emitting diodes

Graphical abstract: Display Omitted Highlights: ► This work focuses on exploring new phosphors of SrAl{sub 2}O{sub 4}:Eu{sup 2+},Ce{sup 3+},Li{sup +} for AC LEDs. ► The work provides a new route to synthesize the pure phase of SrAl{sub 2}O{sub 4}. ► The formation of the impurity phase of Sr{sub 4}Al{sub 14}O{sub 25} was suppressed by using Ce{sup 3+}. ► Charger defects were compensated by using Li{sup +}. ► The luminescence intensity was enhanced significantly by co-doping Ce{sup 3+} and Li{sup +}. -- Abstract: New phosphors are desired to overcoming the flickering luminescence of alternating current light-emitting diodes (AC-LEDs) by compensating dark duration with appropriately persistent luminescence. Here, the phosphor of SrAl{sub 2}O{sub 4}:Eu{sup 2+},Ce{sup 3+},Li{sup +} was developed for this application. The phosphor was synthesized with solid-state reaction method by using H{sub 3}BO{sub 3} as flux. The XRD patterns show that the impurity phase of Sr{sub 4}Al{sub 14}O{sub 25} which always formed together with SrAl{sub 2}O{sub 4} during reaction was suppressed by using Ce. The charger defects caused by the non-equivalent substitution of Sr{sup 2+} with Ce{sup 3+} were compensated with Li{sup +}. Thus, the luminescence intensity of SrAl{sub 2}O{sub 4}:Eu{sup 2+} was enhanced significantly by co-doping Ce{sup 3+} and Li{sup +}. The fluorescence lifetime of the phosphor is about 36.5 ms. The energy dispersive spectra (EDS) assisted with scanning electron microscope (SEM) pictures reveal that Ce ions mainly distribute along grain boundary.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Alternating-current conductivity and dielectric relaxation of bulk iodoargentate

Graphical abstract: The electric modulus shows single dielectric relaxation process in the measured frequency range. - Highlights: • The conduction mechanism is described by quantum mechanical tunneling model. • The applications of dielectric modulus give a simple method for evaluating the activation energy of the dielectric relaxation. • The [Ag{sub 2}I{sub 4}]{sup 2−}1-D chain and [Cu(en){sub 2}]{sup 2+} cation column form the layered stacks by hydrogen bond interactions. - Abstract: An inorganic-organic hybrid compound Cu(en){sub 2}Ag{sub 2}I{sub 4} (en = ethylenediamine) (1) was synthesized and single crystal structurally characterized. Along the [001] direction, the inorganic parts form an infinite 1-D chain and [Cu(en){sub 2}]{sup 2+} cations are separated by inorganic chain. The electrical conductivity and dielectric properties of 1 have been investigated over wide ranges of frequency. The alternating-current conductivities have been fitted to the Almond–West type power law expression with use of a single value of S. It is found that S values for 1 are nearly temperature-independent, which indicates that the conduction mechanism could be quantum mechanical tunneling (QMT) model. The dielectric loss and electric modulus show single dielectric relaxation process. The activation energy obtained from temperature-dependent electric modulus compare with the calculated from the dc conductivity plots.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Alternating current conduction mechanisms of RbMgPO4 compound

Highlights: • Two displacive reversible phase transitions located at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). • The temperature dependence of conductivity was described in terms of Arrhenius relation. • The ac conductivity of this compound is proportional to ω{sup s} where the s values are between 0 and 2. • The (CBH) model was found to be the appropriate transport mechanism in RbMgPO{sub 4} compound. - Abstract: Rubidium magnesium monophosphate (RbMgPO{sub 4}) compound was prepared from highly pure constituents by solid state reaction. It was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC) and impedance spectroscopy. The infrared and Raman spectra were interpreted on the basis of PO{sub 4}{sup 3−} vibrations. DSC revealed two displacive and reversible phase transitions at T{sub 1} = 442/432 K and T{sub 2} = 460/445 K (heating/cooling). The electrical conductivity was measured in the frequency and temperature range 200 Hz-5 MHz and 423 K–523 K, respectively. The obtained results were analysed by fitting the experimental data to an equivalent circuit model. The temperature dependence of alternating and direct current conductivities (σ{sub ac}, σ{sub dc}) confirms the observed transitions in the calorimetric study; they were described in terms of Arrhenius relation. The activation energy’s values were determined in each phase. The AC conductivity behavior is ensured by a single process defined as a hopping transport mechanism. The conductivity frequency dependence was interpreted using the correlated barrier-hopping model (CBH) in all phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Assessment of alternative radionuclides for use in a radioisotope thermoelectric generator

238 Pu is the current fuel source for MMRTGs. This is due to favorable properties, such as high decay heat and low gamma emissions. 238 Pu supplies are dwindling rapidly, necessitating the review of potential replacement isotopes for deep space missions. This work considers nine potential replacements, Ac-227, Am-241, Cf-252, Cm-244, Cs-137, Po-210, Sr-90, Th-228, and Th-170. We have assessed performance of alternatives to 238 Pu by modeling the specific decay-heat and gamma spectra of several potential radioisotopes in SCALE-ORIGEN, and comparing these with 238 Pu. An analysis of heat output, heat stability, safety, availability and required mass, baselined against 238 Pu demonstrates that of those radioisotopes studied, 241 Am has properties that make it most conducive for 238 Pu replacement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Abatement cost curve analysis of freight rail decarbonization alternatives

This paper investigates decarbonization alternatives for the freight rail industry, considering economic, environmental, and operational aspects. The study compares battery-electric and hydrogen fuel cell locomotives, drop-in fuels including biofuels and e-fuels, and overhead catenary electrification through abatement cost analyses. Scenario analysis identifies the cost-effectiveness of each of the technologies at different stages of decarbonization in the US Class 1 freight railroad network. We show that though battery locomotives offer a lower-cost decarbonization option in the considered scenarios, green hydrogen fuel-powered locomotives become more attractive when battery charging delays are considered. We introduce the concept of the technology margin to cater for uncertainties in battery charging operations and hydrogen fuel production for cases where carbon taxes are imposed on railroad operations. In conclusion, the study provides valuable insights for policymakers and rail operators, contributing to sustainable freight rail operations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Deconstructing criterion a of the alternative model for personality disorders.

Here, the construct composition of the Level of Personality Functioning Scale (LPFS; Criterion A) of the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition alternative model for personality disorders (American Psychiatric Association, 2013) was examined in a clinical vignette rating study. Multiple indices of level of personality functioning, psychiatric and psychosocial impairment, Criterion B maladaptive personality traits, and conceptually divergent variables (intellectual level, socioeconomic status, and likability) were used to deconstruct the LPFS. Most variables were highly intercorrelated, but partial correlational analyses showed the LPFS possesses meaningful personality construct variance not fully explained by severity of pathological traits, psychiatric and psychosocial impairment, or the conceptually divergent variables. This exploratory study offers initial evidence that the LPFS contains substantive LPF variance beyond PD severity. Results are framed and discussed in terms of the known conceptual and empirical overlap between Criterion A and Criterion B as well as the differing ways a dimension of personality disorder (PD) severity may be interpreted. Finally, we propose the LPFS is more than statistical artifact created by empirical covariation but less than a true latent dimension of PD severity. The LPFS may be understood as a methodologically pragmatic but theoretically substantive dimension of PD severity.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2011

Study of corrosion of super martensitic stainless steel under alternating current in artificial seawater with electrochemical impedance spectroscopy

The assessment of corrosion requires the use of tools able to quantify the corrosion but often times also qualify it. Electrochemical Impedance Spectroscopy (EIS) is a laboratory tool that can provide both qualification and quantification of corrosion. EIS was successfully used to compare the thickness of the corrosion products formed during the application of different alternating current (AC) densities as well as to characterize pitting. When EIS is applied at the open circuit potential, the technique is nondestructive and predicts the corrosion behavior of the electrode. It can also be used at cathodic potentials while still being nondestructive, providing information about the electrode reaction kinetics, diffusion and electrical double layer.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Alternating and direct current field effects on the structure-property relationships in Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}-x%BaTiO{sub 3} textured ceramics

The influence of alternating (ac) and direct current (dc) fields on the structural and dielectric properties of [001]{sub PC} textured Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}-7%BaTiO{sub 3} (NBT-7%BT) ceramics has been investigated. X-ray diffraction measurements revealed that the depolarization at temperature T{sub d} in poled samples resulted from a tetragonal {yields} pseudo-cubic transition on heating. Moderate ac drive and dc bias had opposite influences on T{sub d}: ac drive decreased the T{sub d}, whereas dc bias increased it. These investigations suggested an effective method to expand the working temperature range of NBT-x%BT textured ceramics to a high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Electro-optically responsive composites of gold nanospheres in 5CB liquid crystal under direct current and alternating current joint action

Direct current (DC) electro-optical (EO) control of transmitted laser beam intensity based on EO controlled coherent light scattering and diffraction by stationary longitudinal texture pattern (LTP) is achieved in planar-oriented cells with a composite mixture of polymer-coated gold spherical nanoparticles (Au-NPs) with a mean diameter of about 12 nm and the room-temperature nematic pentylcyanobiphenyl (5CB). At relatively low DC voltage of about 5 V, the effective scattering/diffraction by Au-NPs/5CB composites leads to a spatial spreading of transmitted coherent light from a low-power continuous wave laser beam, resulting in a drastic reduction of its local intensity. The effect is polarization dependent and is strongest when the polarization of the input laser beam is along the LTP. The EO response of Au-NPs/5CB mixtures is studied under DC and alternating current (AC) joint action with the aim of the potential use of these composite materials as EO controlled diffusers. The specific V-shaped sharp dip in the DC voltage-dependent coherent light transmittance of Au-NPs/5CB planar films, as well as the possibility for erasing the scattering/diffractive LTP in the films by joint low AC voltage, can be useful for EO applications in the field of process control and for detection of weak dynamic electric fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Enhancement of crystal homogeneity of protein crystals under application of an external alternating current electric field

X-ray diffraction rocking-curve measurements were performed on tetragonal hen egg white (HEW) lysozyme crystals grown with and without the application of an external alternating current (AC) electric field. The crystal quality was assessed by the full width at half maximum (FWHM) value for each rocking curve. For two-dimensional maps of the FWHMs measured on the 440 and the 12 12 0 reflection, the crystal homogeneity was improved under application of an external electric field at 1 MHz, compared with that without. In particular, the significant improvement of the crystal homogeneity was observed for the 12 12 0 reflection.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

DC bias effect on alternating current electrical conductivity of poly(ethylene terephthalate)/alumina nanocomposites

Polymer nanocomposites based on metal oxide (ceramic) nanoparticles are a new class of materials with unique properties and designed for various applications such as electronic device packaging, insulation, fabrication and automotive industries. Poly(ethylene terephthalate) (PET)/alumina (Al{sub 2}O{sub 3}) nanocomposites with filler content between 1 wt% and 5 wt% were prepared by melt compounding method using co-rotating twin screw extruder and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and precision LCR meter techniques. The results revealed that proper uniform dispersion at lower content up to 2 wt% of nano-alumina observed by using TEM. Aggregation of nanoparticles was observed at higher content of alumina examined by using SEM and TEM. The frequency dependences of the alternating current (AC) conductivity (σ{sub AC}) of PET/alumina nanocomposites on the filler content and DC bias were investigated in the frequency range of 20Hz - 1MHz. The results showed that the AC and direct current (DC) conductivity increases with increasing DC bias and nano-alumina content upto 3 wt%. It follows the Jonscher’s universal power law of solids. It revealed that σ{sub AC} of PET/alumina nanocomposites can be well characterized by the DC conductivity (σ{sub DC}), critical frequency (ω{sub c}), critical exponent of the power law (s). Roll of DC bias potential led to an increase of DC conductivity (σ{sub DC}) due to the creation of additional conducting paths with the polymer nanocomposites and percolation behavior achieved through co-continuous morphology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Alternating current calorimeter for specific heat capacity measurements at temperatures below 10 K and pressures up to 10 GPa

A developed alternating current calorimeter for measuring the absolute value of specific heat C of a very small sample under a pressure up to 10 GPa and low temperature below 10 K is described. A Bridgman anvil cell made of tungsten carbide with a top diameter of 3 mm is used. A hollow at the top prevents expansion of the sample space over the anvil top. Two chip resistors, which act as a thermometer and a heater, are mounted on the outer part of a copper–beryllium gasket with a frying pan-like shape. Thus, the thermometer is not pressurized. In order to isolate the gasket from the anvil thermally, diamond powder with a grain size of 0.25 μm is placed on the anvil top. Two jumps of C at the superconducting transitions of Pb (3.3 mg) and In (5.0 mg) are observed under various pressures up to 9 GPa, as clearly as those at the ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Luminescence evolution from alumina ceramic surface before flashover under direct and alternating current voltage in vacuum

The luminescence evolution phenomena from alumina ceramic surface in vacuum under high voltage of direct and alternating current are reported, with the voltage covering a large range from far below to close to the flashover voltage. Its time resolved and spatial distributed behaviors are examined by a photon counting system and an electron-multiplying charge-coupled device (EMCCD) together with a digital camera, respectively. The luminescence before flashover exhibits two stages as voltage increasing, i.e., under a relative low voltage (Stage A), the luminescence is ascribed to radiative recombination of hetero-charges injected into the sample surface layer by Schottky effect; under a higher voltage (Stage B), a stable secondary electron emission process, resulting from the Fowler-Nordheim emission at the cathode triple junction (CTJ), is responsible for the luminescence. Spectrum analysis implies that inner secondary electrons within the surface layer of alumina generated during the SSEE process also participate in the luminescence of Stage B. A comprehensive interpretation of the flashover process is formulated, which might promote a better understanding of flashover issue in vacuum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Alternative outlets for sustaining photosynthetic electron transport during dark-to-light transitions

Environmental stresses dramatically impact the balance between the production of photosynthetically derived energetic electrons and Calvin–Benson–Bassham cycle (CBBC) activity; an imbalance promotes accumulation of reactive oxygen species and causes cell damage. Hence, photosynthetic organisms have developed several strategies to route electrons toward alternative outlets that allow for storage or harmless dissipation of their energy. In this work, we explore the activities of three essential outlets associated with Chlamydomonas reinhardtii photosynthetic electron transport: (i) reduction of O 2 to H 2 O through flavodiiron proteins (FLVs) and (ii) plastid terminal oxidases (PTOX) and (iii) the synthesis of starch. Real-time measurements of O 2 exchange have demonstrated that FLVs immediately engage during dark-to-light transitions, allowing electron transport when the CBBC is not fully activated. Under these conditions, we quantified maximal FLV activity and its overall capacity to direct photosynthetic electrons toward O 2 reduction. However, when starch synthesis is compromised, a greater proportion of the electrons is directed toward O 2 reduction through both the FLVs and PTOX, suggesting an important role for starch synthesis in priming/regulating CBBC and electron transport. Moreover, partitioning energized electrons between sustainable (starch; energetic electrons are recaptured) and nonsustainable (H 2 O; energetic electrons are not recaptured) outlets is part of the energy management strategy of photosynthetic organisms that allows them to cope with the fluctuating conditions encountered in nature. Finally, unmasking the repertoire and control of such energetic reactions offers new directions for rational redesign and optimization of photosynthesis to satisfy global demands for food and other resources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

A Note on Alternating Minimization Algorithm for the Matrix Completion Problem

Here, we consider the problem of reconstructing a low-rank matrix from a subset of its entries and analyze two variants of the so-called alternating minimization algorithm, which has been proposed in the past.We establish that when the underlying matrix has rank one, has positive bounded entries, and the graph underlying the revealed entries has diameter which is logarithmic in the size of the matrix, both algorithms succeed in reconstructing the matrix approximately in polynomial time starting from an arbitrary initialization.We further provide simulation results which suggest that the second variant which is based on the message passing type updates performs significantly better.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2012

Alternatives to Helium-3 for Neutron Multiplicity Counters

Multiplicity counters are an example of a neutron detection system affected by the shortage of 3He. Efforts are underway to identify potential 3He neutron detector replacements for use in multiplicity counters. Boron-10 and 6Li based systems are two of the options being explored as near-term 3He alternatives for neutron multiplicity counters. Simulations of BF3, 10B-lined proportional counters and 6Li/ZnS(Ag) sheets in various configurations have been performed with the Monte Carlo particle transport code MCNPX and compared to simulations of existing 3He counters. The system performances are being compared using figure of merits that are the square or cube of the total system efficiency divided by the die-away time. Design considerations include developing a system with enough neutron detection material to achieve the highest possible efficiency, while simultaneously minimizing system size. Adequate moderation is required to thermalize the incident neutrons for increased counting efficiency but as the system size increases so will the die-away time (average lifetime of neutrons in the counter). The optimal moderator configuration is one for which the increase in neutron detection efficiency is not defeated by an increase in die-away time. Thus, the entire system performance must be evaluated with every configuration change. The simulation results will be validated against a bench-top demonstrator unit design based on the system identified through simulations as having the highest performance potential. Presented here are the simulation results with various configurations of BF3 filled proportional counters, 10B lined proportional counters and 6Li/ZnS(Ag) sheets, and preliminary bench-top measurements.

Alternatives to Helium-3 for Neutron Multiplicity ↗