Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

An Assessment of Stratospheric Water Vapor Trends and Variations Above the Boulder Region

This study analyzes time series of stratospheric water vapor (SWV) data at 30 hPa, based on frost-point hygrometer (FPH) measurements at Boulder, CO (40°N, 255°E), and on sets of HALOE scans above that region for 1993 through 2005; their differing trends agree with previously published findings. Yet, there is an apparent switch over in 2002 from positive to negative trends in the HALOE time series, and that change follows the episodic decrease of tropical, lower stratospheric SWV in early 2001. The HALOE data points only resolve medium to large scale spatial variations, as they are based on an average of four or more limb scans within a latitude/longitude sector near Boulder. The FPH time series do not indicate a similar change of trend in 2002, although its time series points have variations about the mean that are twice as large as those from HALOE. The FPH soundings are sensitive to variations from all spatial scales, however, including the effects of a local vertical mixing of the air due to gravity waves. The vertical gradient SWV mixing ratio with altitude is positive at 30 hPa. There is also a positive trend in methane and its conversion to water vapor during this time that may explain a slightly larger SWV trend from the local FPH data than from the HALOE data. The Nimbus 7 LIMS experiment provides daily SWV plots at medium to large scales during the dynamically active, winter and springtime periods, for assessing the effects of meridional transport of SWV from its source regions. There is transport of high SWV from polar regions and of lower SWV from the subtropics at those times. SWV variations and trends from both the FPH and HALOE time series are reasonable and in accord with the spatial scales that they observed.

Ellis Remsberg↗

Variation in Predicted Orbital Lifetime Due to Launch Year

We present trends in predicted orbital lifetimes of CubeSats based not only on orbital parameters, but also launch year and the Area-to-Mass (AtM) ratio of the CubeSat. Determining the orbital lifetime variation of CubeSats in low-Earth orbit (LEO) is an important aspect of mission planning because of two competing factors: (1) the maximum orbital lifetime for orbital debris mitigation requirements, and (2) the minimum orbit duration necessary to accomplish the spacecraft mission requirements. The orbital lifetime is a function of orbital parameters, the AtM ratio of the CubeSat, and date of orbit insertion. Solar flux varies with time, peaking and declining across the 11-year solar cycle and affecting the amount of atmospheric drag on the CubeSat. This results in large variations in orbital lifetime dependent on the mission's launch date. We calculated the variation of orbital lifetime for multiple commonly used 1U to 6U CubeSat mission types across the two upcoming solar cycles. For any given AtM ratio and altitude combination in this analysis, the predicted orbital lifetime varies up to a factor of five due to orbit insertion occurring in a different year. Some examples of orbital lifetime spreads are 5 months to 2 years, and 1.5 to 7.5 years. While orbital lifetimes correlate to the solar cycle, the phasing of the maximum values varies based on a given AtM ratio and altitude combination. Different combinations of these two factors will result in the maximum predicted orbital lifetime occurring at different launch years throughout the solar cycle. Therefore, there is not a specific year within a solar cycle which can be used to calculate the maximum predicted orbital lifetime for all CubeSats. Since CubeSats are typically flown as a rideshare payload on a launch vehicle, mission planners must account for launch date variation in their orbital lifetime predictions. We recommend calculating orbital lifetime for a range of dates to allow for risk planning due to launch date slips, and other mission planning best practices.

CubeSat↗

Variational Information Planning for Sequential Decision Making

We consider the setting of sequential decision making where, at each stage, potential actions are evaluated based on expected reduction in posterior uncertainty, given by mutual information (MI). As MI typically lacks a closed form, we propose an approach which maintains variational approximations of, both, the posterior and MI utility. Our planning objective extends an established variational bound on MI to the setting of sequential planning. The result, variational information planning (VIP), is an efficient method for sequential decision making. We further establish convexity of the variational planning objective and, under conditional exponential family approximations, we show that the optimal MI bound arises from a relaxation of the well-known exponential family moment matching property. Here, we demonstrate VIP for sensor selection, experiment design, and active learning, where it meets or exceeds methods requiring more computation, or those specialized to the task.

Pacheco, Jason↗

Seasonal Variation of Indoor Radon Concentration in the Tropics: Comparative studies between Kuala Lumpur, Malaysia and Kerala, India

The radiation dose received by man from indoor radon and its progeny is the largest at more than 50% of total dose received. The seasonal variation of indoor radon concentration in Kerala, India and Kuala Lumpur, Malaysia were studied. The Southwest coast of the Kerala state in India is known to have very high levels of natural background radiation owing to the rare earths rich monazite sand available in large amount. Kuala Lumpur, Malaysia used to be a famous tin mining area where it was done using open cast system. One-year measurements of radon concentration in houses were done for these two regions. It was found that there is considerable seasonal variation in the levels of radon in Kerala but the variation in Kuala Lumpur is only less than 10%.

58 GEOSCIENCES↗

ADM Analysis of gravity models within the framework of bimetric variational formalism

Bimetric variational formalism was recently employed to construct novel bimetric gravity models. In these models an affine connection is generated by an additional tensor field which is independent of the physical metric. In this work we demonstrate how the ADM decomposition can be applied to study such models and provide some technical intermediate details. Using ADM decomposition we are able to prove that a linear model is unstable as has previously been indicated by perturbative analysis. Moreover, we show that it is also very difficult if not impossible to construct a non-linear model which is ghost-free within the framework of bimetric variational formalism. However, we demonstrate that viable models are possible along similar lines of thought. To this end, we consider a set up in which the affine connection is a variation of the Levi-Civita one. As a proof of principle we construct a gravity model with a massless scalar field obtained this way.

79 ASTRONOMY AND ASTROPHYSICS↗

Environmental resource deficit may drive the evolution of intraspecific trait variation in invasive plant populations

Intraspecific trait variation within natural populations (i.e. intra-population trait variation, IPTV) is the basic source for selection and can have significant ecological consequences. Higher IPTV may increase a population's niche breath and benefit interspecies competition under a resource-limited environment, thus affecting the ability of a species to move into novel habitats. However, the reciprocal influences of variation in environmental conditions and phenotypic trait expression in spreading plant populations are not clearly defined. Here, we propose that during invasion, IPTV and its relative change in response to key resource enrichment may increase with the resource deficit of invaded sites, and that this relationship may facilitate plant invasions into resource-limited environments. We analyzed the invasion trend, IPTV and its response to water enrichment, and moisture variability among populations of an annual grass Brachypodium hybridum in California, United States. We incorporated a genotyping-by-sequencing approach, a common garden experiment that had two water level treatments, and public plant and climate databases. Our hypothesis was supported by the observation that for populations that invaded sites with higher spring moisture deficit, both their seed biomass IPTV (for the water-enriched treatment only) and relative change of the IPTV across water treatments were larger when examined in the common garden experiment. A generally north to south spreading direction was found in these B. hybridum populations, towards a drier and warmer climate exhibiting higher moisture deficit for plant growth. Our results suggest a role for interactions between IPTV (rather than trait means) and environmental resource availability in promoting plant invasions, providing new insights into the significance of IPTV in shaping plant geographic distributions.

54 ENVIRONMENTAL SCIENCES↗

An Introduction to Variational Calculus

Variational Calculus is an advanced topic in mathematics. This document exists to compile the basics of Variational Calculus in a readable and digestible manner for application by engineers. This document is a living document and will be updated as time moves forward. It is the hope that by reading this document, the basics of Variational Calculus can be readily applied to any system/function of interest. This does not serve as a replacement for textbooks or other learned sources but should act as a companion piece to better serve the reader in times of confusion and distress.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The relative variational model: A topological view of matter and its properties: Specific heat and enthalpy

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. The crystalline solid is a previously empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystal structure is determined by its mean vibrational volume. Thus, the changes of volume and the changes of internal energy are intrinsically linked. In fact, physical and material properties are the interdependent and bijective quantifications associated with variations of the internal energy. These properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. In this paper, the Debye's integral of the heat capacity at constant volume is analytically solved. The experimental data of the specific heat at constant pressure and the enthalpy variations are also analytically depicted by the model in the temperature range of 0 K up to the melting point. The data reductions were applied to the oxides Al{sub 2}O{sub 3} and UO{sub 2}. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The relative variational model - A topological view of matter and its properties: UO{sub 2}{sup {+-}x} density

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. The crystalline solid is a previously empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystal structure is determined by its mean vibrational volume. Thus, the changes of volume and the changes of internal energy are intrinsically linked. In fact, physical and material properties are the interdependent and bijective quantifications associated with variations of the internal energy. These properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. In this paper, the lattice parameter and specific mass of UO{sub 2}{sup {+-}x} are depicted in dependence on the variations of the stoichiometry in the band of -0.016 {<=} x and <0.25 and temperature from 0 K up to melting point. (authors)

36 MATERIALS SCIENCE↗

Linking Soil Moisture Variation and Abundance of Plants to Geomorphic Processes: A Generalized Model for Erosion-Uplifting Landscapes

American Geophysical Union. All Rights Reserved. The diffusive and advective erosion-created landscapes have similar structure (hillslopes and channels) across different scales regardless of variations in drivers and controls. The relative magnitude of diffusive erosion to advective erosion ( D/K ratio) in a landscape development model controls hillslope length, shape, and drainage density, which regulate soil moisture variation, one of the critical resources of plants, through the contributing area ( A ) and local slope ( S ) represented by a topographic index (TI). Here we explore the theoretical relation between geomorphic processes, TI, and the abundance and distribution of plants. We derived an analytical model that expresses the TI with D, K , and A . This gives us the relation between soil moisture variation and geomorphic processes. Plant tolerance curves are used to link plant performance to soil moisture. Using the hypothetical tolerance curves of three plants, we show that the abundance and distribution of xeric, mesic, and hydric plants on the landscape are regulated by the D/K ratio. Where diffusive erosion is the major erosion process (large D/K ratio), mesic plants have higher abundance relative to xeric and hydric plants and the landscape has longer and convex-upward hillslope and low channel density. Finally, increasing the dominance of advective erosion increases relative abundance of xeric and hydric plants dominance, and the landscape has short and concave hillslope and high channel density.

59 BASIC BIOLOGICAL SCIENCES↗

Radial Artery Coursing Behind the Biceps Brachii Tendon: Significance for the Transradial Catheterization and a Clinically Oriented Classification of the Radial Artery Variations

In routine clinical practice the variations of the radial artery are the main reason for technical failure during transradial catheterization. If these variations are well documented, however, they do not represent a problem in the transradial approach. Therefore, we report here a rare case of the radial artery which is very strange but potentially valuable for the clinical practice: it arises at a right angle from the brachial artery and passes behind the biceps brachii tendon. Based on our findings and on an extensive literature review, we propose for the first time a clinically oriented classification of the variations of the radial artery. This classification is related to the catheterization success at the usual access site of the radial artery at the wrist.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A variational multiscale immersed meshfree method for heterogeneous materials

Abstract We introduce an immersed meshfree formulation for modeling heterogeneous materials with flexible non-body-fitted discretizations, approximations, and quadrature rules. The interfacial compatibility condition is imposed by a volumetric constraint, which avoids a tedious contour integral for complex material geometry. The proposed immersed approach is formulated under a variational multiscale based formulation, termed the variational multiscale immersed method (VMIM). Under this framework, the solution approximation on either the foreground or the background can be decoupled into coarse-scale and fine-scale in the variational equations, where the fine-scale approximation represents a correction to the residual of the coarse-scale equations. The resulting fine-scale solution leads to a residual-based stabilization in the VMIM discrete equations. The employment of reproducing kernel (RK) approximation for the coarse- and fine-scale variables allows arbitrary order of continuity in the approximation, which is particularly advantageous for modeling heterogeneous materials. The effectiveness of VMIM is demonstrated with several numerical examples, showing accuracy, stability, and discretization efficiency of the proposed method.

36 MATERIALS SCIENCE↗

Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experiment

In laser powder bed fusion (L-PBF) additive manufacturing, the mechanical performance, microstructure and defects of fabricated parts are closely associated with the melt pool morphology, e.g., its dimension and shape through the building process. Past studies have largely focused on how the process parameters such as laser power and scan speed affect melt pool characteristics. In this study, the melt pool morphology variation as a function of preheating temperature in the conduction, transition, and keyhole regimes and the underlying mechanisms in each regime are investigated through ex-situ sample characterization and computation thermal fluid dynamics (CtFD) simulation. Single tracks with different combinations of laser power and scan speed are deposited on an Inconel 718 bare plate preheated to a temperature range of 100–500 °C in the experiment. Significant changes are observed in melt pool morphology as a function of preheating temperature from optical measurements of melt track cross sections. The depth of melt pool in the three regimes increases monotonically with preheating temperature, e.g., at 500 °C, the experimental melt pool depth is increased by 49% in conduction regime, 34% in transition regime and 33% in keyhole regime, respectively, while the variation of melt pool width in each regime does not all follow an increasing trend but depends on the melt pool regimes. Melt pool width variation in the conduction and transition regimes is found to depend on the enhanced heat conduction directly related to temperature dependent thermal properties. Through validated CtFD simulations, it is found that in the keyhole regime the evaporation mass, recoil pressure, and laser drilling effect is enhanced with higher preheating temperature, which gives rise to a deeper melt pool. The simulations also reveal that preheating temperature significantly elongates the melt track length due to the increased flow rate and strong recoil pressure that accelerates the backward flow.

36 MATERIALS SCIENCE↗

Variational encoder geostatistical analysis (VEGAS) with an application to large scale riverine bathymetry

Estimation of riverbed profiles, also known as bathymetry, plays a vital role in many applications, such as safe and efficient inland navigation, prediction of bank erosion, land subsidence, and flood risk management. The high cost and complex logistics of direct bathymetry surveys, i.e, depth imaging, have encouraged the use of indirect measurements such as surface flow velocities. However, estimating high-resolution bathymetry from indirect measurements is an inverse problem that can be computationally challenging. Here, we propose a reduced-order model (ROM) based approach that utilizes a variational autoencoder (VAE), a type of deep neural network with a narrow layer in the middle, to compress bathymetry and flow velocity information and accelerate bathymetry inverse problems from flow velocity measurements. In our application, the shallow-water equations (SWE) with appropriate boundary conditions (BCs), e.g., the discharge and/or the free surface elevation, constitute the forward problem, to predict flow velocity. Then, ROMs of the SWEs are constructed on a nonlinear manifold of low dimensionality through a variational encoder and the bathymetry inversion problem is derived on the low-dimensional latent space in a Hierarchical Bayesian setting. Further, the reformulation allows variational inference with a small number (e.g., $\mathscr{O}$ (100) of ROM runs and efficient uncertainty quantification. We have tested our inversion approach on a one-mile reach of the Savannah River, GA, USA. Once the neural network is trained (offline stage), the proposed technique can perform the inversion operation orders of magnitude faster than traditional inversion methods that are commonly based on linear projections, such as principal component analysis (PCA), or the principal component geostatistical approach (PCGA). Furthermore, tests show that the algorithm can estimate the bathymetry with good accuracy even with sparse flow velocity measurements.

54 ENVIRONMENTAL SCIENCES↗

Correlation functions from a unified variational principle: Trial Lie groups

Time-dependent expectation values and correlation functions for many-body quantum systems are evaluated by means of a unified variational principle. It optimizes a generating functional depending on sources associated with the observables of interest. It is built by imposing through Lagrange multipliers constraints that account for the initial state (at equilibrium or off equilibrium) and for the backward Heisenberg evolution of the observables. The trial objects are respectively akin to a density operator and to an operator involving the observables of interest and the sources. We work out here the case where trial spaces constitute Lie groups. This choice reduces the original degrees of freedom to those of the underlying Lie algebra, consisting of simple observables; the resulting objects are labeled by the indices of a basis of this algebra. Explicit results are obtained by expanding in powers of the sources. Zeroth and first orders provide thermodynamic quantities and expectation values in the form of mean-field approximations, with dynamical equations having a classical Lie–Poisson structure. At second order, the variational expression for two-time correlation functions separates–as does its exact counterpart–the approximate dynamics of the observables from the approximate correlations in the initial state. Two building blocks are involved: (i) a commutation matrix which stems from the structure constants of the Lie algebra; and (ii) the second-derivative matrix of a free-energy function. The diagonalization of both matrices, required for practical calculations, is worked out, in a way analogous to the standard RPA. The ensuing structure of the variational formulae is the same as for a system of non-interacting bosons (or of harmonic oscillators) plus, at non-zero temperature, classical Gaussian variables. This property is explained by mapping the original Lie algebra onto a simpler Lie algebra. The results, valid for any trial Lie group, fulfill consistency properties and encompass several special cases: linear responses, static and time-dependent fluctuations, zero- and high-temperature limits, static and dynamic stability of small deviations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A variational phase-field framework for thermal softening and dynamic ductile fracture

A variational phase field model for dynamic ductile fracture is presented. Here, the model is designed for elasto-viscoplastic materials subjected to rapid deformations in which the effects of heat generation and material softening are dominant. The variational framework allows for the consistent inclusion of plastic dissipation in the heat equation as well as thermal softening. It employs a coalescence function to degrade fracture energy during regimes of high plastic flow. A variationally consistent form of the Johnson–Cook model is developed for use with the framework. Results from various benchmark problems in dynamic ductile fracture are presented to demonstrate capabilities. In particular, the ability of the model to regularize shear band formation and subsequent damage evolution in two- and three-dimensional problems is demonstrated. Importantly, these phenomena are naturally captured through the underlying physics without the need for phenomenological criteria such as stability thresholds for the onset of shear band formation.

42 ENGINEERING↗

Variational integrators for reduced magnetohydrodynamics

Reduced magnetohydrodynamics is a simplified set of magnetohydrodynamics equations with applications to both fusion and astrophysical plasmas, possessing a noncanonical Hamiltonian structure and consequently a number of conserved functionals. We propose a new discretisation strategy for these equations based on a discrete variational principle applied to a formal Lagrangian. The resulting integrator preserves important quantities like the total energy, magnetic helicity and cross helicity exactly (up to machine precision). As the integrator is free of numerical resistivity, spurious reconnection along current sheets is absent in the ideal case. If effects of electron inertia are added, reconnection of magnetic field lines is allowed, although the resulting model still possesses a noncanonical Hamiltonian structure. After reviewing the conservation laws of the model equations, the adopted variational principle with the related conservation laws is described both at the continuous and discrete level. We verify the favourable properties of the variational integrator in particular with respect to the preservation of the invariants of the models under consideration and compare with results from the literature and those of a pseudo-spectral code.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A low-rank control variate for multilevel Monte Carlo simulation of high-dimensional uncertain systems

Multilevel Monte Carlo (MLMC) is a recently proposed variation of Monte Carlo (MC) simulation that achieves variance reduction by simulating the governing equations on a series of spatial (or temporal) grids with increasing resolution. Instead of directly employing the fine grid solutions, MLMC estimates the expectation of the quantity of interest from the coarsest grid solutions as well as differences between each two consecutive grid solutions. When the differences corresponding to finer grids become smaller, hence less variable, fewer MC realizations of finer grid solutions are needed to compute the difference expectations, thus leading to a reduction in the overall work. Here this paper presents an extension of MLMC, referred to as multilevel control variates (MLCV), where a low-rank approximation to the solution on each grid, obtained primarily based on coarser grid solutions, is used as a control variate for estimating the expectations involved in MLMC. Cost estimates as well as numerical examples are presented to demonstrate the advantage of this new MLCV approach over the standard MLMC when the solution of interest admits a low-rank approximation and the cost of simulating finer grids grows fast.

97 MATHEMATICS AND COMPUTING↗