SEARCH · Engineering Papers

Results for “transparency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Investigation of environmental change pattern in Japan. Investigation of variations in the prominent oceanic current, Kuroshio

The author has identified the following significant results. It was confirmed that band 4 and 5 had some information as to the sea surface, such as spreading of coastal waters or eddy-like motion of surface water. It was concluded that the front line along the coast from Kumano-nada to Shiono-misaki in the monochromatic prints and in the pseudocolor images was a boundary between coastal waters and offshore water. Most of Ise Bay was covered by polluted water, having salinity values less than 30%, high water color scale of 6 to 8, and transparency less than 5 m.

Maruyasu, T.↗

NASA NTRS1977

Particle size and velocity measurement by laser anemometry

The use of a forward scattering Laser Anemometer system for the measurement of particle diameters larger than the fringe spacing is investigated. A systematic calibration experiment demonstrates a direct relationship between signal amplitude and particle diameter for transparent particles between 30 microns and 240 microns in diameter. A light scattering analysis confirms these measurements and indicates how the range of particles which can be measured using the peak (mean) signal depends on the optical arrangement and particle properties. On the basis of this work a real time Laser Anemometer signal processor is modified so that the peak of the mean of each signal can be measured. A method of correcting data for the effect of particles which do not go through the center of the measurement volume is derived. Good agreement is found between particle size distributions measured in sprays by using the Laser Anemometer and size distributions measured by collecting the particles on a slide and using an image analysis computer.

Yule, A. J.↗

NASA NTRS1977

Effects of high temperature and e-beam irradiation on the stability of refractory thin films

Refractory thin films of Al2O3, ZrO2, MgO, ThO2, and BN have been investigated in situ in an UHV transmission electron microscope. The electron transparent refractory films were prepared by electron-beam evaporation, anodization, RF sputtering, and thinning of bulk crystal materials. The study concentrates on monitoring the thermal and mechanical stability of the films, phase and structural changes, and electron irradiation effects as a function of film-preparation conditions. With increasing temperatures, five different crystallographic phases were observed for both anodized and electron-beam-evaporated alumina films. Zirconia films exhibited two phase transitions upon heating to 1200 C and electron-irradiation-induced crystallization of ZrO2 even at room temperature. MgO, ThO2, and BN films did not undergo any noticeable phase transformation but ruptured due to sintering below 1200 C.

Lee, E. H.↗

NASA NTRS1977

Analyses of atmospheric extinction data obtained by astronomers. II - Seasonal variations in astronomical extinction

Archival astronomical atmospheric extinction records obtained from fifteen observatory sites were analyzed by not strictly rigorous statistical averaging procedures in order to obtain sufficiently reliable pictures of the trends and variations in atmospheric transparency for the period 1956-1972. While the northern hemisphere sites reveal definite seasonal variations with maxima occurring during local summer, the southern hemisphere displays little such effect. The only southern hemisphere sites with any variation were in South Africa, where a late winter maximum was observed.

Laulainen, N. S.↗

NASA NTRS1977

Plasma polymerized coating for polycarbonate - Single layer, abrasion resistant, and antireflection

Plasma polymerized vinyltrimethoxy silane films were deposited on transparent polycarbonate substrates. The adherent, clear films protected the substrates from abrasion and also served as antireflection coatings. Posttreatment of the vinyltrimethoxy silane films in an oxygen glow discharge further improved the abrasion resistance. ESCA (electron spectroscopy for chemical analysis) and IR transmission spectra of some films were recorded, and an elemental analysis of the films was obtained.

Wydeven, T.↗

NASA NTRS1976

Satellite cloud climatology of summertime cumulus research areas

Defense Meteorological Satellite Program data available for the summer of 1974 was used to construct a cloud climatology of areas where weather modification experiments are currently being conducted or planned; the three High Plains Experiment sites at Colby, Kansas, Big Springs, Texas, and Miles City, Montana; South Park, Colorado, where the South Park Area Cumulus Experiment is being conducted; and the National Hail Research Experiment area in northeastern Colorado. Digital data tapes were produced from the transparencies, obtained from the sun-synchronous polar-orbiting satellite passing over the study areas at about 1200 local time, and a computer analysis was carried out, producing areas and numbers of clouds for each area and day as well as providing data for cumulative averages over selected time periods for each study area.

Stodt, R. W.↗

NASA NTRS1976

Conductivity effects in high-voltage spacecraft insulating materials

Laboratory measurements were performed to assess the influence of various external parameters on the conductivity properties of several typical and potential spacecraft insulating materials in a simulated space environment. The materials tested include Kapton, Teflon, quartz, and polyvinylidene fluoride. The parameters measured comprise sample thickness, temperature, applied voltage, illumination intensity and wavelength, and electron beam energy and current density. All tests were conducted in a vacuum chamber at a pressure of about one millionth Torr both with conventional optically-transparent gold front-surface electrodes and with the front surfaces of the test samples exposed directly to an electron beam. The data presented illustrate some of the complexities in electrical characteristics exhibited by the materials as a result of interactions with various conditions of their environment.

Adamo, R. C.↗

NASA NTRS1977

A radio lens in the ionosphere

Using a modified version of the classical Cornu spiral, fading patterns in agreement with observations of radio signals on 140 and 360 MHz from the geostationary satellite ATS6, have been obtained. The particular fading patterns chosen show modulated quasi-periodic fading before and after a deep central minimum. It is shown that a cylindrical lens in the ionosphere required to produce this is only about 100 m across (an order of magnitude smaller than the size of the pattern on the ground) and if it were circular in cross-section would have a maximum plasma frequency of over 40 MHz. This suggests the reason why calculations based on a transparent phase screen did not give the observed fading pattern for 40 MHz signals. It was not possible to deduce the height of the lens above the ground, though we would incline to an E-region origin.

Davies, K.↗

NASA NTRS1976

Subsolidus reduction phenomena in lunar norite 78235 - Observations and interpretations

Lunar rock 78235 is a coarse-grained strongly shocked cumulate norite consisting of about equal proportions of chromian bronzite and anorthite. A study of the rock has revealed the presence in the partly maskelynitized plagioclase of oriented sets of metallic iron rods, what appear to be sets of oriented transparent anisotropic iron-bearing silicate rods and disseminated hard aluminum-rich domains. It is suggested that the apparent nonopaque rods might have the hollandite structure and contain Fe(+3), while the Al-rich domains could represent iron-depleted regions in the plagioclase.

Sclar, C. B.↗

NASA NTRS1977

An improved Venus cloud model

An inhomogeneous cloud model for Venus is presented in which a (transparent) sulfuric acid aerosol extends above the tropopause, but an (absorbing) sulfur aerosol consisting of much larger particles does not. It is shown that the temperature dependence of the absorption spectrum of sulfur, combined with the lapse rate in the planet's atmosphere, can explain the color of Venus. A simple 'black-white' radiative-transfer model is developed, the spectral reflectance of the cloud model is computed for the 60-km level in Marov's (1972) model atmosphere, and strong evidence is obtained that sulfur is the UV absorber on Venus. The wavelength variation of contrast in UV cloud features is analyzed, and absorption is found to increase with depth at every wavelength due to the inward increase in temperature. The black-white model is applied to CO2 absorption, variations in CO2 and UV absorption with phase angle are compared, and line profiles are calculated for pressure-broadened CO2 lines. The theoretical results are compared with Venera 9 and 10 data.

Young, A. T.↗

NASA NTRS1978

Cryostat safety tent

Transparent vinyl tent is designed for easy assembly with minimum use of handtools. Tent prevents toxic or explosive vapors from entering building. Frame posts are mounted on casters to allow easy mobility.

Millman, J. L.↗

NASA NTRS1978

Window flaw detection by backscatter lighting

Portable fiber-optic probe detects tiny flaws in transparent materials. Probe transmits light through surface to illuminate interior of material by backscattering off its edges. Light-sensitive contact paper records scratch pattern. Technique can be used for rapid visual checks. Flexible fiber optics are safely used in explosive or flammable areas; they present no hazard of breakage or contamination in controlled environments.

Crockett, L. K.↗

NASA NTRS1978

Wide angle pinhole camera

Hemispherical refracting element gives pinhole camera 180 degree field-of-view without compromising its simplicity and depth-of-field. Refracting element, located just behind pinhole, bends light coming in from sides so that it falls within image area of film. In contrast to earlier pinhole cameras that used water or other transparent fluids to widen field, this model is not subject to leakage and is easily loaded and unloaded with film. Moreover, by selecting glass with different indices of refraction, field at film plane can be widened or reduced.

Franke, J. M.↗

NASA NTRS1978

Fire-retardant epoxy polymers

Phosphorus atoms in molecular structure of epoxies make them fire-retardant without degrading their adhesive strength. Moreover, polymers are transparent, unlike compounds that contain arsenic or other inorganics. They have been used to bond polyvinylfluoride and polyether sulfone films onto polyimide glass laminates.

Akawie, R. I.↗

NASA NTRS1979

Orifice calibration module

Module, consisting of transparent plastic cylinder containing separate suction and calibration chambers, allows static-pressure orifices to be calibrated, and rapidly checked for leaks. Device is compact, saves time, and improves accuracy, and reliability of pressure measurements.

Culotta, R.↗

NASA NTRS1979

Improved method of solar-cell assembly

Method bonds solar-cell modules between rigid or flexible base and plastic protective cover. Method relies on using one of several commercially-available, transparent, silicone adhesives as bonding agent. Should it ever be necessary to repair or replace some part of assembly, it may be possible to remove cover without destroying package since adhesive remains flexible.

Broder, J. D.↗

NASA NTRS1977

Conductive spacecraft materials development program

The objectives of this program are to provide design criteria, techniques, materials, and test methods to ensure control of absolute and differential charging of spacecraft surfaces. The control of absolute and differential charging of spacecraft cannot be effected without the development of new and improved or modified materials or techniques that will provide electrical continuity over the surface of the spacecraft. The materials' photoemission, secondary emission, thermooptical, physical, and electrical properties in the space vacuum environment both in the presence and absence of electrical stress and ultraviolet, electron, and particulate radiation, are important to the achievement of charge control. The materials must be stable or have predictable response to exposure to the space environment for long periods of time. The materials of interest include conductive polymers, paints, transparent films and coatings as well as fabric coating interweaves.

Lehn, W. L.↗

NASA NTRS1977

Materials and techniques for spacecraft static charge control

An overview of the design, development, fabrication, and testing of transparent conductive coatings and conductive lattices deposited or formed on high resistivity spacecraft dielectric materials to obtain control static charge buildup on spacecraft external surfaces is presented. Fabrication techniques for the deposition of indium/tin oxide coatings and copper grid networks on Kapton and FEP Teflon films and special frit coatings for OSR and solar cell cover glasses are discussed. The techniques include sputtering, photoetching, silkscreening, and mechanical processes. A facility designed and built to simulate the electron plasma at geosynchronous altitudes is described along with test procedures. The results of material characterizations as well as electron irradiation aging effects in this facility for spacecraft polymers treated to control static charge are presented. The data presents results for electron beam energies up to 30 kV and electron current densities of 30 nA/cm squared. Parameters measured include secondary emission, surface leakage, and through the sample currents as a function of primary beam energy and voltage.

Amore, L. J.↗