SEARCH · Engineering Papers

Results for “theoretical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Analysis of generic scramjet external nozzle flowfields employing simulant gases

Experimental and computational results are presented for a generic scramjet nozzle/afterbody model. Mixtures of argon and Freon were employed as simulant scramjet exhaust gases because they correctly model the inviscid simulation parameters of actual scramjet combustion products, allowing test and analysis at significantly reduced temperatures. Air was also employed as an exhaust gas to provide experimental and computational comparisons with simulant gas effects. Several computational aerodynamic analysis codes, employing different levels of theoretical modeling, were applied to compute solutions about the scramjet geometry. The solutions are compared with measured surface static and flowfield pitot pressure data taken in a Mach 6 freestream.

Tatum, Kenneth E.↗

NASA NTRS2010

Aeroelastic Studies of a Rectangular Wing with a Hole: Correlation of Theory and Experiment

Two rectangular wing models with a hole have been designed and tested in the Duke University wind tunnel to better understand the effects of damage. A rectangular hole is used to simulate damage. The wing with a hole is modeled structurally as a thin elastic plate using the finite element method. The unsteady aerodynamics of the plate-like wing with a hole is modeled using the doublet lattice method. The aeroelastic equations of motion are derived using Lagrange's equation. The flutter boundary is found using the V-g method. The hole's location effects the wing's mass, stiffness, aerodynamics and therefore the aeroelastic behavior. Linear theoretical models were shown to be capable of predicting the critical flutter velocity and frequency as verified by wind tunnel tests.

Conyers, Howard J.↗

NASA NTRS2016

The Effects of Temporal and Topographic Decorrelation on Forest Height Retrieval Using Airborne Repeat-Pass L-Band Polarimetric SAR Interferometry

We have explored the effects of temporal baseline and terrain slope on forest height estimation using L-band repeat-pass polarimetric-interferometric synthetic aperture radar (PolIn-SAR). Data were collected using NASA’s Uninhabited Aerial Vehicle Synthetic Aperture Radar instrument over a study area exhibiting high slope topography in the Laurentides Wildlife Reserve of Quebec, Canada. We used lidar-derived canopy height and terrain slope maps to quantify the decorrelation effects, in both magnitude and phase, that distort the observed coherences compared to the random volume over ground forest model. We derived forest height maps for a number of different temporal baselines using both fixed model parameters and model parameters that varied with slope, and compared the results. Further work is necessary to develop improved slope correction methods, and to see if slope corrections derived from lidar data for this study area can be applied to other study areas, or generalized to a theoretical model.

polarimetric SAR interferometry↗

NASA NTRS1975

Electromagnetic wave energy conversion research

Known electromagnetic wave absorbing structures found in nature were first studied for clues of how one might later design large area man-made radiant-electric converters. This led to the study of the electro-optics of insect dielectric antennae. Insights were achieved into how these antennae probably operate in the infrared 7-14um range. EWEC theoretical models and relevant cases were concisely formulated and justified for metal and dielectric absorber materials. Finding the electromagnetic field solutions to these models is a problem not yet solved. A rough estimate of losses in metal, solid dielectric, and hollow dielectric waveguides indicates future radiant-electric EWEC research should aim toward dielectric materials for maximum conversion efficiency. It was also found that the absorber bandwidth is a theoretical limitation on radiant-electric conversion efficiency. Ideally, the absorbers' wavelength would be centered on the irradiating spectrum and have the same bandwith as the irradiating wave. The EWEC concept appears to have a valid scientific basis, but considerable more research is needed before it is thoroughly understood, especially for the complex randomly polarized, wide band, phase incoherent spectrum of the sun. Specific recommended research areas are identified.

Bailey, R. L.↗

NASA NTRS2003

Formation of Giant Planets and Brown Dwarves

According to the prevailing core instability model, giant planets begin their growth by the accumulation of small solid bodies, as do terrestrial planets. However, unlike terrestrial planets, the growing giant planet cores become massive enough that they are able to accumulate substantial amounts of gas before the protoplanetary disk dissipates. Models predict that rocky planets should form in orbit about most stars. It is uncertain whether or not gas giant planet formation is common, because most protoplanetary disks may dissipate before solid planetary cores can grow large enough to gravitationally trap substantial quantities of gas. Ongoing theoretical modeling of accretion of giant planet atmospheres, as well as observations of protoplanetary disks, will help decide this issue. Observations of extrasolar planets around main sequence stars can only provide a lower limit on giant planet formation frequency . This is because after giant planets form, gravitational interactions with material within the protoplanetary disk may cause them to migrat~ inwards and be lost to the central star. The core instability model can only produce planets greater than a few jovian masses within protoplanetary disks that are more viscous than most such disks are believed to be. Thus, few brown dwarves (objects massive enough to undergo substantial deuterium fusion, estimated to occur above approximately 13 jovian masses) are likely to be formed in this manner. Most brown dwarves, as well as an unknown number of free-floating objects of planetary mass, are probably formed as are stars, by the collapse of extended gas/dust clouds into more compact objects.

Lissauer, Jack J.↗

NASA NTRS1979

The influence of grazing flow on the acoustic impedance of a cylindrical wall cavity

The acoustic impedance at low frequencies of a circular cylindrical cavity in the wall of a duct in the presence of a low Mach number mean flow is examined. A linearized theoretical model is proposed which involves the unsteady shedding of vorticity from the upstream edge of the cavity aperture. The shed vorticity causes a 'potential difference' to be established across the aperture which modifies the reciprocating volume flux and results in the dissipation of acoustic energy. Comparison of theoretical predictions with preliminary experimental data obtained by Parrott (1978) provides tentative support for the present analysis. Certain difficulties associated with the linearized treatment of cavity oscillations are also discussed.

Howe, M. S.↗

NASA NTRS1987

Remote sensing of earth terrain

A systematic approach for the identification of terrain media such as vegetation canopy, forest, and snow covered fields is developed using the optimum polarimetric classifier. The covariance matrices for the various terrain cover are computed from theoretical models of random medium by evaluating the full polarimetric scattering matrix elements. The optimal classification scheme makes use of a quadratic distance measure and is applied to classify a vegetation canopy consisting of both trees and grass. Experimentally measured data are used to validate the classification scheme. Theoretical probability of classification error using the full polarimetric matrix are compared with classification based on single features including the phase difference between the VV and HH polarization returns. It is shown that the full polarimetric results are optimal and provide better classification performance than single feature measurements.

Kong, J. A.↗

NASA NTRS1988

Remote sensing of earth terrain

A systematic approach for the identification of terrain media such as vegetation canopy, forest, and snow covered fields is developed using the optimum polarimetric classifier. The covariance matrices for the various terrain covers are computed from the theoretical models of random medium by evaluating the full polarimetric scattering matrix elements. The optimal classification scheme makes use of a quadratic distance measure and is applied to classify a vegetation canopy consisting of both trees and grass. Experimentally measured data are used to validate the classification scheme. Theoretical probability of classification error using the full polarimetric matrix are compared with classification based on single features including the phase difference between the VV and HH polarization returns. It is shown that the full polarimetric results are optimal and provide better classification performance than single feature measurements. A systematic approach is presented for obtaining the optimal polarimetric matched filter which produces maximum contrast between two scattering classes, each represented by its respective covariance matrix.

Kong, J. A.↗

NASA NTRS1991

Response characteristics of the phase Doppler particle analyzer for sizing spherical particles larger than the light wavelength

A theoretical model, based on the geometrical optics approach, has been developed to simulate various aspects of the phase Doppler particle analyzer (PDPA). The model has taken into consideration the nonuniform (Gaussian) illumination of the particles as they pass through the measurement probe volume. Instrument response curves have been generated for various scattering angles by performing spatial and temporal integration of the scattered intensity distribution over the receiver surface. Experimental and theoretical investigations have established the applicability of this instrument to both forward scattered and backscattered angles.

Sankar, Subramanian V.↗

NASA NTRS1993

Evidence for protostellar collapse in B335

We have observed five rotational transitions of H2CO and CS toward the Bok globule, B335, with high spatial and spectral resolution. The characteristic shape of the observed profiles provides direct, kinematic evidence of collapse. In addition, we have modeled line profiles of collapsing dense cores with density and velocity structures taken from the theory of Shu and coworkers. Using the age of collapse as the only free parameter, we found that the strengths and profiles of the observed lines can be well fitted by the theoretical model. Our best-fit model gives an age of 1.5 x 10 exp 5 yr, corresponding to an infall radius of 0.04 pc and a total mass of 0.4 solar mass for the central star and disk. Outside the infall radius, there is a static envelope with a r exp -2 density distribution, an average temperature of 13 K, and a turbulent velocity (1/e width) of 0.12 km/s. The CS abundance is 3.6 x 10 exp -9 with about 30 percent uncertainty.

Zhou, Shudong↗

NASA NTRS1995

Modeling and numerical simulation of microwave pulse propagation in air breakdown environment

It is shown that ionization occurs wherever the field intensity of the pulse exceeds the local breakdown threshold field of the background air. The produced plasma then attenuates the pulse and gives rise to a tail erosion phenomenon that plays the primary role in limiting the energy transfer of the pulse from source to destination. A theoretical model describing the propagation of an intense microwave pulse in an air breakdown environment is developed that includes the possible focusing effect introduced by either using phase array antennas or the other arrangements. The self-consistent description of the propagation process is provided by a set of two modal equations. These include a continuity equation (Poynting's equation) for the energy density of the pulse and a rate equation of the electron density. A forward wave approximation is used to simplify Poynting's equation, and a semiempirical formula is used for the ionization frequency, nu(sub i). This frequency provides the coupling between the two modal equations, and is used to express the electron rate equation explicitly. In terms of the relevant parameters of the atmosphere, these two equations are normalized for numerical analysis of pulse propagation in the atmosphere. The dependencies of the propagation characteristics of the pulse on intensity, frequency, width, and shape of the pulse are determined. The numerical simulations lead to a useful empirical relation p(exp 3)w = alpha = constant, where p and w are the incident power and width of the pulse and alpha depends on the percentage of pulse energy transferred from the source point to a destined position. The density distribution of the pulse's self-generated plasma is also evaluated. The results also show that for ionization caused by a single unfocused microwave pulse transmitted upwards from the ground, the maximum electron density produced at, for example, 50 km altitude is limited by the tail erosion effect to below 10(exp 6) cm(exp -3). Repetitive pulse and focused beam approaches are also examined. Both approaches can increase the maximum electron density by no more than an order of magnitude. A scheme using two obliquely propagating pulses intersecting at the destined height, e.g. 50 km, is considered. It is shown that the electron density generated at the lowest intersecting position can easily reach a value of 6.6 x 10(exp 8) cm(exp -3), which is considered to be high enough for artificial ionospheric mirror (AIM) application.

Kim, J.↗

NASA NTRS1984

Low-energy proton stopping power of N2, O2 and water vapor and deviations from Bragg's rule

A modified local plasma model, based on the works of Lindhard and Winther; and Bethe, Brown, and Walske, is established. The Gordon-Kim model for molecular electron density is used to calculate stopping power of N2, O2, and water vapor for protons of energy ranging from 40 keV to 2.5 MeV, resulting in good agreement with experimental data. Deviations from Bragg's rule are evaluated and are discussed under the present theoretical model.

Xu, Y. J.↗

NASA NTRS1988

Analysis of the light scattering interferometry for spheres larger than the light wavelength

A theoretical model, based on the geometrical optics approach, has been developed to simulate various aspects of the phase Doppler particle analyzer (PDPA). The model has taken into consideration the non-uniform (Gaussian) illumination of the particles as they pass through the probe volume. Instrument response curves have been generated for various scattering angles by performing spatial and temporal integration of the scattered intensity distribution over the receiver surface. Experimental and theoretical investigations have established the applicability of this instrument to both forward and backscatter angles.

Bachalo, W. D.↗

NASA NTRS1991

Laboratory simulation of the surface of Halley's Comet

In the past year we have developed a model for the dissociation of icy grains in comets. In general, this model does not predict the radical yield that is observed in the jets of comets. To reproduce these yields, the concentration of the radical's precursors will have to be too high to be consistent with the abundance that we expect in comets. We have also constructed a theoretical model for the formation of ions on icy cometary grains. That model shows that only a small number of the cometary ions could be produced as ions in icy grains if the particle has only positively charged ions. If it contains both positive and negative ions then it could have a higher concentration of ions without violating charge neutrality. When such a particle evaporates, it can release ions with both charges into the gas phase. These ions could produce radicals via dissociative recombination with electrons if they are positive ions or by photoattachment of electrons if they are negative electrons. Finally, an avalanche process involving the acceleration of electrons towards charged particles is evaluated. It is shown that this will not lead directly to gas phase ions, but it might lead to additional ionization and dissociation on the grain.

Jackson, William M.↗

NASA NTRS1992

Modeling and analysis methodology for aeroelastically tailored chordwise deformable wings

Structural concepts have been created which produce chordwise camber deformation that results in enhanced lift. A wing box can be tailored to utilize each of these with composites. In attempting to optimize the aerodynamic benefits, we have found there are two optimal designs that are of interest. There is a weight optimum which corresponds to the maximum lift per unit structural weight. There is also a lift optimum that corresponds to maximum absolute lift. New structural models, the basic deformation mechanisms that are utilized and typical analytical results are presented. It appears that lift enhancements of sufficient magnitude can be produced to render this type of wing tailoring of practical interest. Experiments and finite element correlations are performed which confirm the validity of the theoretical models utilized.

Rehfield, Lawrence W.↗

NASA NTRS1996

Oscillating-Flow Regenerator Test Rig: Hardware and Theory With Derived Correlations for Screens and Felts

A number of wire mesh and metal felt test samples, with a range of porosities, yield generic correlations for friction factor, Nusselt number, enhanced axial conduction ratio, and overall heat flux ratio. This information is directed primarily toward stirling cycle regenerator modelers, but will be of use to anyone seeking to better model fluid flow through these porous materials. Behind these results lies an oscillating-flow test rig, which measures pumping dissipation and thermal energy transport in sample matrices, and several stages of data-reduction software, which correlate instantaneous values for the above dimensionless groups. Within the software, theoretical model reduces instantaneous quantifies from cycle-averaged measurables using standard parameter estimation techniques.

Gedeon, D.↗

NASA NTRS2016

Slow Solar Wind: Observations and Modeling

While it is certain that the fast solar wind originates from coronal holes, where and how the slow solar wind (SSW) is formed remains an outstanding question in solar physics even in the post-SOHO era. The quest for the SSW origin forms a major objective for the planned future missions such as the Solar Orbiter and Solar Probe Plus. Nonetheless, results from spacecraft data, combined with theoretical modeling, have helped to investigate many aspects of the SSW. Fundamental physical properties of the coronal plasma have been derived from spectroscopic and imaging remote-sensing data and in situ data, and these results have provided crucial insights for a deeper understanding of the origin and acceleration of the SSW. Advanced models of the SSW in coronal streamers and other structures have been developed using 3D MHD and multi-fluid equations.

Abbo, L.↗

NASA NTRS1990

Numerical simulation of fluid flow and heat transfer in a thin liquid film over a stationary and rotating disk and comparison with experimental data

In the first section, improvements in the theoretical model and computational procedure for the prediction of film height and heat-transfer coefficient of the free surface flow of a radially-spreading thin liquid film adjacent to a flat horizontal surface of finite extent are presented. Flows in the presence and absence of gravity are considered. Theoretical results are compared to available experimental data with good agreement. In the presence of gravity, a hydraulic jump is present, isolating the flow into two regimes: supercritical upstream from the jump and subcritical downstream of it. In this situation, the effects of surface tension are important near the outer edge of the disk where the fluid experiences a free fall. A region of flow separation is present just downstream of the jump. In the absence of gravity, no hydraulic jump or separated flow region is present. The variation of the heat-transfer coefficient for flows in the presence and absence of gravity are also presented. In the second section, the results of a numerical simulation of the flow field and associated heat transfer coefficients are presented for the free surface flow of a thin liquid film adjacent to a horizontal rotating disk. The computation was performed for different flow rates and rotational velocities using a 3-D boundary-fitted coordinate system. Since the geometry of the free surface is unknown and dependent on flow rate, rate of rotation, and other parameters, an iterative procedure had to be used to ascertain its location. The computed film height agreed well with existing experimental measurements. The flow is found to be dominated by inertia near the entrance and close to the free surface and dominated by centrifugal force at larger radii and adjacent to the disk. The rotation enhances the heat transfer coefficient by a significant amount.

Faghri, Amir↗