Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Highly dispersed Co deposited on Al 2 O 3 particles via CoCp 2 + H 2 ALD

Highly dispersed cobalt atoms were deposited on porous alumina particles using atomic layer deposition (ALD) with a CoCp 2 /H 2 chemistry at approximately 7 wt%. H 2 did not completely reduce the cyclopentadienyl organic ligands bound to deposited Co atoms at ALD reaction conditions. A sharp decline in Co deposited per cycle for two or more ALD cycles indicates that much of the Al 2 O 3 surface is sterically blocked from further CoCp 2 deposition after the first CoCp 2 exposure. Temperature programmed reduction confirmed that the adsorbed precursor organic ligands persist after H 2 exposures during ALD and temperatures as high as 500 °C are required to fully reduce the organic ligands to CH 4 . High resolution, element sensitive imaging showed that Co atoms were dispersed on the Al 2 O 3 surface and could deposit in previously unobserved multiple growth morphologies, specifically layers that were continuous over several angstroms or discrete nanoparticles. Density functional theory calculations were used to examine Co atom adsorption, show the altered haptic binding of cracked Cp ligands, and to calculate the thermodynamics of Cp ligand decomposition. The lateral steric hindrance between organic ligands bound to deposited Co atoms, Cp ligand decomposition mechanism, and local Al 2 O 3 surface termination all likely determine the observed Co growth morphology during initial ALD cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Effect of Fluoroethylene Carbonate Additives on the Initial Formation of the Solid Electrolyte Interphase on an Oxygen-Functionalized Graphitic Anode in Lithium-Ion Batteries

The formation of a solid electrolyte interphase (SEI) at the electrode/electrolyte interface substantially affects the stability and lifetime of lithium-ion batteries (LIBs). One of the methods to improve the lifetime of LIBs is by the inclusion of additive molecules to stabilize the SEI. To understand the effect of additive molecules on the initial stage of SEI formation, in this work we compare the decomposition and oligomerization reactions of a fluoroethylene carbonate (FEC) additive on a range of oxygen-functionalized graphitic anodes to those of an ethylene carbonate (EC) organic electrolyte. A series of density functional theory (DFT) calculations augmented by ab initio molecular dynamics (AIMD) simulations reveal that EC decomposition on an oxygen-functionalized graphitic ($11\bar{2}0$) edge facet through a nucleophilic attack on an ethylene carbon site (C E ) of an EC molecule (S2 mechanism) is spontaneous during the initial charging process of LIBs. However, decomposition of EC through a nucleophilic attack on a carbonyl carbon (C C ) site (S1 mechanism) results in alkoxide species regeneration that is responsible for continual oligomerization along the graphitic surface. In contrast, FEC prefers to decompose through an S1 pathway, which does not promote alkoxide regeneration. Including FEC as an additive is thus able to suppress alkoxide regeneration and results in a smaller and thinner SEI layer that is more flexible toward lithium intercalation during the charging/discharging process. In addition, we find that the presence of different oxygen functional groups at the surface of graphite dictates the oligomerization products and the LiF formation mechanism in the SEI.

25 ENERGY STORAGE↗
DOE OSTI2021

A systematic study of lanthanide titanates (A 2 Ti 2 O 7 ) chemical durability: corrosion mechanisms and control parameters

Dense lanthanide titanates ranging from La 2 Ti 2 O 7 to Yb 2 Ti 2 O 7 were synthesized by spark plasma sintering with similar micro-sized microstructure, and their chemical durability and degradation mechanisms were investigated by semi-dynamic leaching tests. Different corrosion mechanisms from incongruent to congruent dissolution were observed with preferential elemental releases of lanthanides in A 2 Ti 2 O 7 (A = La to Gd) and Ti in Er 2 Ti 2 O 7 and Yb 2 Ti 2 O 7 . Initial leaching was controlled by surface dissolution and long-term dissolution shifted to a diffusion-controlled mechanism for titanate pyrochlores from Sm 2 Ti 2 O 7 to Yb 2 Ti 2 O 7 . Both short-term and long-term leaching rates decreased from La 2 Ti 2 O 7 to Yb 2 Ti 2 O 7 , and materials became more corrosion resistant with decreasing ionic radius ratios of the rare-earth elements and titanium. Amorphous passivation films of several nm-thick enriched with Ti formed on the surfaces of the corroded materials, and the formation mechanisms were governed either by surface reorganization with preferential release of lanthanides or dissolution-precipitation from saturated bulk solutions with preferential release of titanium. Finally, these results demonstrate that the ionic size plays a dominant role in determining chemical durability of lanthanide titanates and a strong correlation is established among chemical composition/structural variation, passivation film formation and corrosion mechanisms, and materials chemical durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Growth and structural studies of In/Au(111) alloys and InO x /Au(111) inverse oxide/metal model catalysts

Indium oxide has received attention as an exciting candidate for catalyzing the CO 2 hydrogenation to methanol due to its high selectivity (>80%). Compared to the extent of research on the activity of indium oxide-based powder catalysts, very little is known about the phenomena associated with the formation of surface alloys involving indium or the growth mechanism for indium oxide nanoparticles. In this report, scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) were employed to elucidate the growth mode, structure, and chemical state of In/Au(111) alloys and InO x /Au(111) inverse model catalysts. Here, our study reveals distinct morphological differences between In/Au(111) and InO x /Au(111), and the InO x structure also depends strongly on the preparation conditions. In/Au surface alloy systems with extremely low coverage (0.02 ML) form islands preferentially on the elbow sites of reconstructed Au(111) herringbone, regardless of hcp and fcc stacking. At higher coverage (0.1 ML), the In islands expand over the herringbone in the <110> direction and create two dimensional domain structures over the entire surfaces. Moreover, this 2D domain structure is disturbed by temperature with high dispersion of indium atoms observed during the annealing process. Oxidation of the In/Au(111) surface alloys with O 2 at 550 K produces InO x /Au(111) systems which contain various sizes of InO x aggregates (from 0.7 to 10 nm). On the other hand, InO x /Au(111) surfaces prepared by vapor deposition of In at 550 K in an O 2 background exhibit highly dispersed and uniformly small InO x particles (~1 nm). Both InO x systems were confirmed to be partially oxidized by XPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dependency of solvation effects on metal identity in surface reactions

Solvent interactions with adsorbed moieties involved in surface reactions are often believed to be similar for different metal surfaces. However, solvents alter the electronic structures of surface atoms, which in turn affects their interaction with adsorbed moieties. To reveal the importance of metal identity on aqueous solvent effects in heterogeneous catalysis, we studied solvent effects on the activation free energies of the O–H and C–H bond cleavages of ethylene glycol over the (111) facet of six transition metals (Ni, Pd, Pt, Cu, Ag, Au) using an explicit solvation approach based on a hybrid quantum mechanical/molecular mechanical (QM/MM) description of the potential energy surface. A significant metal dependence on aqueous solvation effects was observed that suggests solvation effects must be studied in detail for every reaction system. The main reason for this dependence could be traced back to a different amount of charge-transfer between the adsorbed moieties and metals in the reactant and transition states for the different metal surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface electron modulation of metal oxide‐based electrochemical devices by surface additives—linking sensors and fuel cells

Abstract The interaction between ambient oxygen and the metal oxide surface is central to various electrochemical devices. Solid oxide fuel cell cathodes and semiconducting metal oxide gas sensors are two prominent examples. Parallels between these two systems are highlighted in this perspective. In both cases, the presence of foreign surface species has been found to significantly alter the interactions of the metal oxides’ surfaces with oxygen. On the one hand, interactions are hindered due to the presence of certain impurities, such as the degradation of fuel cell cathode by Si‐species that originate from processing or from operating environments. On the other hand, electrochemically active noble metal additives have been intentionally used to tune the sensor response of metal oxides. In the case of electrochemically active additives, the need for operando spectroscopies to elucidate the mechanism is discussed. Electronic coupling of the surface additive with the metal oxide is found to play a central role in both cases. We use these results to demonstrate that insights gained from either field can be effectively applied to the other.

Materials Science↗
DOE OSTI2023

The Origin and Evolution of the Normal Type Ia SN 2018aoz with Infant-phase Reddening and Excess Emission

SN 2018aoz is a Type Ia SN with a B-band plateau and excess emission in infant-phase light curves ≲1 day after the first light, evidencing an over-density of surface iron-peak elements as shown in our previous study. Here, we advance the constraints on the nature and origin of SN 2018aoz based on its evolution until the nebular phase. Near-peak spectroscopic features show that the SN is intermediate between two subtypes of normal Type Ia: core normal and broad line. The excess emission may be attributable to the radioactive decay of surface iron-peak elements as well as the interaction of ejecta with either the binary companion or a small torus of circumstellar material. Nebular-phase limits on Hα and He ι favor a white dwarf companion, consistent with the small companion size constrained by the low early SN luminosity, while the absence of [O ι] and He ι disfavors a violent merger of the progenitor. Of the two main explosion mechanisms proposed to explain the distribution of surface iron-peak elements in SN 2018aoz, the asymmetric Chandrasekhar-mass explosion is less consistent with the progenitor constraints and the observed blueshifts of nebular-phase [Fe ιι] and [Ni ιι]. The helium-shell double-detonation explosion is compatible with the observed lack of C spectral features, but current 1D models are incompatible with the infant-phase excess emission, $B_{max}$--$V_{max}$ color, and weak strength of nebular-phase [Ca ιι]. Although the explosion processes of SN 2018aoz still need to be more precisely understood, the same processes could produce a significant fraction of Type Ia SNe that appear to be normal after ~1 day.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Reconstructing the Wave Function of Magnetic Topological Insulators MnBi 2 ⁢Te 4 and MnBi 4 ⁢Te 7 Using Spin-Resolved Photoemission

Despite their importance for exotic quantum effects, the surface electronic structure of magnetic topological insulators MnBi 2 ⁢Te 4 and MnBi 4 ⁢Te 7 remains poorly understood. Using high-efficiency spin- and angle-resolved photoemission spectroscopy, we directly image the spin-polarization and orbital character of the surface states in both compounds and map our observations onto a model wave function to describe the complex spin-orbital texture, which solidifies our understanding of the surface band structure by establishing the single-band nature of the most prominent states. Most importantly, our analysis reveals a new mechanism for reducing the magnetic gap of the topological surface states based on the orbital composition of the wave function.

Han, Xue [SLAC National Accelerator Laboratory (SL↗
DOE OSTI2021

Recent Advances in Functional Materials through Cellulose Nanofiber Templating

Advanced templating techniques have enabled delicate control of both nano- and microscale structures and have helped thrust functional materials into the forefront of society. Cellulose nanomaterials are derived from natural polymers and show promise as a templating source for advanced materials. Use of cellulose nanomaterials in templating combines nanoscale property control with sustainability, an attribute often lacking in other templating techniques. Use of cellulose nanofibers for templating has shown great promise in recent years, but previous reviews on cellulose nanomaterial templating techniques have not provided extensive analysis of cellulose nanofiber templating. Cellulose nanofibers display several unique properties, including mechanical strength, porosity, high water retention, high surface functionality, and an entangled fibrous network, all of which can dictate distinctive aspects in the final templated materials. Many applications exploit the unique aspects of templating with cellulose nanofibers that help control the final properties of the material, including, but not limited to, applications in catalysis, batteries, supercapacitors, electrodes, building materials, biomaterials, and membranes. A detailed analysis on the use of cellulose nanofibers templating is provided, addressing specifically how careful selection of templating mechanisms and methodologies, combined toward goal applications, can be used to directly benefit chosen applications in advanced functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Factors Determining Selectivity of Acid- and Base-Catalyzed Self- and Cross-Condensation of Acetone and Cyclopentanone

In a combined kinetics and density functional theory (DFT) study, we have explored several factors that affect the selectivity of acid- and base-catalyzed self- and cross-aldol condensation of acetone (ACE) and cyclopentanone (CPO). These factors include competitive adsorption, molecular structure, and electron polarization of the two ketones on the catalyst surface. Here, kinetic analysis shows that on MgO, self-condensation of both ACE and CPO is limited by the initial unimolecular enolization step. Accordingly, CPO exhibits a higher self-condensation rate than ACE due to the more favorable α-C–H abstraction by the basic O site. The thermodynamic parameters derived from the kinetic analysis indicate that under cross-condensation reaction conditions, the MgO surface fraction covered by CPO is significantly higher than that covered by ACE. Therefore, the product distribution is dominated by [CPO]-activated products ([CPO]CPO + [CPO]ACE). Also, for a given enolate (indicated as [CPO] or [ACE]), the higher surface coverage of CPO leads to enhanced C–C coupling with CPO as the electrophile ([CPO]CPO > [CPO]ACE; [ACE]CPO > [ACE]ACE). By contrast, for both acid catalysts investigated, the rate-limiting step is the bimolecular C–C coupling, with aspects of this step depending on the density of acid sites. That is, on the high-acid-density MCM-41-SO 3 H catalyst, condensation follows a bimolecular dual-site mechanism (Langmuir–Hinshelwood model). On this catalyst surface, the ACE coverage is higher than that of CPO, which causes a higher selectivity for those products in which ACE is the electrophile ([CPO]ACE > [CPO]CPO; [ACE]ACE > [ACE]CPO). Steric hindrance is another factor that affects selectivity in the same way, favoring products in which the electrophile is ACE since it presents a lower steric hindrance to C–C coupling than CPO. Therefore, the same sequence of products is obtained for the low-acid-density MCM-41-SO 3 H catalyst, which proceeds on a single-acid site with the other molecule in the liquid phase (Eley–Rideal model). In this case, the electrophile coverage is not relevant, but the steric hindrance is, yielding the same trend as above ([CPO]ACE > [CPO]CPO; [ACE]ACE > [ACE]CPO).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Transition state stabilization depends on solvent identity, pore size, and hydrophilicity for epoxidations in zeolites

Ti-silicates activate H 2 O 2 to form Ti-hydroperoxo and Ti-peroxo intermediates that can react with alkenes to form epoxide products. Comparisons of kinetics for 1-octene epoxidation with H 2 O 2 on Ti-BEA and Ti-MFI catalysts with different hydrophilicities in methanol (CH 3 OH) or acetonitrile (CH 3 CN) solvents show the significance of the solvent for stabilizing catalytically-relevant species and the complex interdependencies between solvent, catalyst topology, and hydrophilicity. Epoxidation turnover rates are higher in CH 3 CN than CH 3 OH for Ti-BEA, but the opposite trend is observed for Ti-MFI. Ti-silicates with greater silanol densities, however, give greater epoxidation turnover rates than their hydrophobic counterparts in both solvents. Kinetic, spectroscopic, and thermodynamic analyses show that differences in turnover rates mainly arise from changes in the stabilization of reactive surface species by solvent mediated interactions, because the mechanism of the reaction and stability of the fluid-phase reactants remain similar in CH 3 CN and CH 3 OH. Specifically, apparent activation free energy values ($ΔG^{‡}_{App}$) indicate that surface intermediates responsible for alkene epoxidation are stabilized to a greater extent in CH 3 CN on Ti-BEA and in CH 3 OH on Ti-MFI. Hydrophilic Ti-silicates present lower ($ΔG^{‡}_{App}$) values regardless of solvent identity, which suggests that these differences correspond to the number of hydrogen-bonding solvent molecules found near reactive species bound to Ti active sites. Finally, taken together, these findings demonstrate the role of solvent molecules in allowing reactive intermediates to recognize the properties of active sites beyond the length-scale of covalent bonds, which carry implications for epoxidation but also other reactions within solvent-filled pores of microporous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Upper bounds for 21st-century surface air temperatures in the Western United States

The last decade has seen a large number of severe heatwaves that were unprecedented in the observational record, highlighting challenges associated with observationally-based statistical quantification of the likelihood and magnitude of future extreme temperatures. An alternative to such probabilistic assessments is identification of upper bounds that quantify the hottest surface air temperatures that can possibly be achieved by the end of the 21st century. Theory, simulations, and observational analyses support the existence of a finite upper bound for surface air temperature; however, estimates for future upper-bound values that are realistic and usable for planning remain unavailable. Here, we combine atmospheric theory with large ensembles of dynamically downscaled projections to estimate historical and end-of-century upper bounds for surface air temperatures. A number of physical mechanisms can influence upper bounds, and at the end of the 21st century, estimates based on mechanisms that yield more moderate upper-bounds produce values around 60∘C for much of the Western United States and in excess of 80∘C for the hottest parts of the domain. Even cooler high-altitude locations have end-of-century upper bounds over 50∘C. Although these upper-bound estimates might seem implausibly large, increases in the upper bounds over the 21st century are similar to increases in dynamically downscaled peak surface temperatures after adjusting those downscaled temperatures to eliminate the possibly biased model trends in surface specific humidity. While upper bound estimates are high relative to historical observations, they nonetheless suggest that heatwave intensity risk is bounded, with uncertainty dominated by projections of surface and upper-level humidity.

Risser, Mark D↗
DOE OSTI2024

Environmental damping and vibrational coupling of confined fluids within isolated carbon nanotubes

Abstract Because of their large surface areas, nanotubes and nanowires demonstrate exquisite mechanical coupling to their surroundings, promising advanced sensors and nanomechanical devices. However, this environmental sensitivity has resulted in several ambiguous observations of vibrational coupling across various experiments. Herein, we demonstrate a temperature-dependent Radial Breathing Mode (RBM) frequency in free-standing, electron-diffraction-assigned Double-Walled Carbon Nanotubes (DWNTs) that shows an unexpected and thermally reversible frequency downshift of 10 to 15%, for systems isolated in vacuum. An analysis based on a harmonic oscillator model assigns the distinctive frequency cusp, produced over 93 scans of 3 distinct DWNTs, along with the hyperbolic trajectory, to a reversible increase in damping from graphitic ribbons on the exterior surface. Strain-dependent coupling from self-tensioned, suspended DWNTs maintains the ratio of spring-to-damping frequencies, producing a stable saturation of RBM in the low-tension limit. In contrast, when the interior of DWNTs is subjected to a water-filling process, the RBM thermal trajectory is altered to that of a Langmuir isobar and elliptical trajectories, allowing measurement of the enthalpy of confined fluid phase change. These mechanisms and quantitative theory provide new insights into the environmental coupling of nanomechanical systems and the implications for devices and nanofluidic conduits.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic lattice distortions driven by surface trapping in semiconductor nanocrystals

Nonradiative processes limit optoelectronic functionality of nanocrystals and curb their device performance. Nevertheless, the dynamic structural origins of nonradiative relaxations in nanocrystals are not understood. Here, femtosecond electron diffraction measurements corroborated by atomistic simulations uncover transient lattice deformations accompanying radiationless electronic processes in semiconductor nanocrystals. Investigation of the excitation energy dependence shows that hot carriers created by a photon energy considerably larger than the bandgap induce structural distortions at nanocrystal surfaces on few picosecond timescales associated with the localization of trapped holes. On the other hand, carriers created by a photon energy close to the bandgap result in transient lattice heating that occurs on a much longer 200 ps timescale, governed by an Auger heating mechanism. Elucidation of the structural deformations associated with the surface trapping of hot holes provides atomic-scale insights into the mechanisms deteriorating optoelectronic performance and a pathway towards minimizing these losses in nanocrystal devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fundamental Investigations into the Properties and Performance of Advanced Materials

Intelligent engineering designs require an accurate understanding of material behavior, since any uncertainties or gaps in knowledge must be counterbalanced with heightened factors of safety, leading to overdesign. Therefore, building better structures and pushing the performance of new components requires an improved understanding of the thermomechanical response of advanced materials under service conditions. This dissertation provides fundamental investigations of several advanced materials: thermoset polymers, a common matrix material for fiber-reinforced composites and nanocomposites; aluminum alloy 7075-T6 (AA7075-T6), a high-performance aerospace material; and ceramic matrix composites (CMCs), an advanced composite for extreme-temperature applications. To understand matrix interactions with various interfaces and nanoinclusions at their fundamental scale, the properties of thermoset polymers are studied at the atomistic scale. An improved proximity-based molecular dynamics (MD) technique for modeling the crosslinking of thermoset polymers is carefully established, enabling realistic curing simulations through its ability to dynamically and probabilistically perform complex topology transformations. The proximity-based MD curing methodology is then used to explore damage initiation and the local anisotropic evolution of mechanical properties in thermoset polymers under uniaxial tension with an emphasis on changes in stiffness through a series of tensile loading, unloading, and reloading experiments. Aluminum alloys in aerospace applications often require a fatigue life of over 109 cycles, which is well over ii the number of cycles that can be practically tested using conventional fatigue testing equipment. In order to study these high-life regimes, a detailed ultrasonic cycle fatigue study is presented for AA7075-T6 under fully reversed tension-compression loading. The geometric sensitivity, frequency effects, size effects, surface roughness effects, and the corresponding failure mechanisms for ultrasonic fatigue across different fatigue regimes are investigated. Finally, because CMCs are utilized in extreme environments, oxidation plays an important role in their degradation. A multiphysics modeling methodology is thus developed to address the complex coupling between oxidation, mechanical stress, and oxygen diffusion in heterogeneous carbon fiber-reinforced CMC microstructures.

Schichtel, Jacob J.↗
DOE OSTI2024

Link Budget Analysis of Interrogation of Surface Acoustic Wave Sensors in Metallic Tubular Structures

For presentation at, and publication in the proceedings of, the National Radio Science Meeting, Boulder, CO, January 9-13, 2024.In this paper, we report on loss mechanisms contributing to the link budget for interrogation of Surface Acoustic Wave (SAW) devices in metallic tubular structures. Impedance matching losses associated with a SAW device are minimized by design optimization and antenna coupling losses and resulting propagation losses are measured in metallic tubular structures enabling prediction of interrogation distances with various antenna configurations.

Pingree, Rick↗
DOE OSTI2022

Addition of transient kinetics capabilities to an infrared reflection absorption spectroscopy system through synchronized gas pulsing and data acquisition

Surface science methodologies for understanding thermodynamic aspects of surface processes are at an advanced level. However, instrumentation and approaches for extracting kinetic parameters from elementary steps are far less accessible. In this work, we present an approach combining the use of a fast gas pulsing valve synchronized with data acquisition to enable surface transient kinetics studies using infrared reflection absorption spectroscopy. This methodology applies to the study of reversible processes and borrows concepts and ideas from molecular beam scattering and temporal analysis of products. Here, a temporal resolution of ~67 ms is achieved, and this is illustrated through the study of CO adsorption and desorption on a Pd(111) crystal in the presence and absence of background O 2 . The same approach can be extended to other surface spectroscopies, such as X-ray photoelectron spectroscopy, to obtain spectra with high temporal resolution and signal-to-noise ratio and enable future multimodal surface transient kinetic studies aiming at elucidating reaction mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unveiling the origins of work-hardening enhancement and mechanical instability in laser shock peened titanium

Laser shock-peening (LSP) produces complex gradients in microstructures and residual stresses, which enables fabrication of metallic engineering components with superior mechanical properties. In this work, we use non-destructive and spatially resolved high-energy X-ray diffraction (HE-XRD) to investigate the influences of LSP on microstructure, surface topography, and residual stress for high purity titanium plates. LSP is found to produce large compressive in-plane residual stresses near the peened surface which monotonically decay to zero about 2.5 mm below the surface. These properties were also tracked during in-situ tensile loading, allowing stress partitioning and work-hardening rates to be measured as a function of depth. The surface region is found to have the highest work-hardening rate and remain mechanically stable up to sample failure. In addition, a crystal rigid rotation along a transversal axis of about 27 & nbsp; was observed at large applied strain near the surface region, which is attributed to the formation of denser dispersed shear bands. Furthermore, a sudden drop in tensile stress was observed at a depth of similar to 160 mu m from the LSP surface, indicating the formation of a localized mechanical instability zone (LMIZ). The origin of this LMIZ could be attributed to the increase in shear stress induced by a load transfer from LSP surface due to the formation of denser dispersed shear bands. These observations indicate a localized transition in deformation behavior has occurred from dispersed shear banding to LMIZ and homogeneous deformation.

36 MATERIALS SCIENCE↗