Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Long‐Range Confinement‐Driven Enrichment of Surface Oxygen‐Relevant Species Promotes C−C Electrocoupling in CO 2 Reduction

Abstract CO 2 reduction is a highly attractive route to transform CO 2 into useful feedstocks, of which C 2 products are more desired than C 1 , yet face high kinetic barriers of C−C electrocoupling. Here, the engineering of pore‐enabled local confinement reaction environments is reported for tuning the enrichment of surface‐adsorbed oxygen‐relevant species and the establishment of their pronounced benefits in promoting C−C coupling over oxide‐derived Cu‐based catalysts. A new approach of utilizing the microphase separation of a block copolymer is developed to fabricate bicontinuous mesoporous CuO nanofibers (CuO‐BPNF). The enhanced confinement from long‐range mesochannels enables the adsorption of OH ad /O ad on the Cu surface at a wide negative potential range of −0.7 – −1.3 V in CO 2 reduction, which cannot be achieved over conventional deficient and short‐range pores. Constant‐potential DFT calculations reveal that the surface‐bound oxygen species weakens *CO affinity with the Cu (111) surface and lowers the kinetic barriers for both *CO−CO dimerization and *CO hydrogenation to enable *CO−CHO coupling. Accordingly, a CO 2 ‐to‐C 2 Faradaic efficiency of 74.7% over CuO‐BPNF is shown, significantly larger than counterparts with conventional pores. This work offers a general design principle of confinement engineering to manage the adsorption of reactive species for steering reaction pathways in interfacial catalysis.

Chemistry↗
DOE OSTI2022

Modification of LiMn 2 O 4 surfaces by controlling the Acid–Base surface chemistry of atomic layer deposition

In this combined theoretical and experimental study, we report the effects of Al precursor selection on the growth chemistry, interfacial structure, and electrochemistry of Al 2 O 3 coatings on spinel LiMn 2 O 4 (LMO) surfaces by atomic layer deposition (ALD). Five Al precursors, exhibiting a range of Lewis acid-base properties, were used to establish trends in the ALD Al 2 O 3 growth chemistry on LMO powders in comparison to redox-inactive planar silicon substrates. We show that the Lewis acid-base properties of the Al precursor ligands can be used to tune both the Mn oxidation states and the Al 2 O 3 coverage on the LMO surface. Density functional theory calculations are used to examine the reaction mechanism of each precursor on LMO surfaces, elucidating a correlation between the Lewis acidity of the ligands and the decomposition thermochemistry. In-depth X-ray photoelectron spectroscopy and in situ Fourier transform infrared spectroscopy measurements support these theoretical predictions and further reveal how different Al precursors modify the atomic and electronic structure near the LMO surface during ALD. While the Mn oxidation state is strongly influenced by the Lewis acidity of the precursor ligand, the surface coverage and thickness of the Al 2 O 3 coating are a more representative descriptor of the electrochemical performance measured in coin cell experiments. Finally, we show how the ligand acid-base properties of ALD precursors can be used to rationally tailor atomic layer growth mechanisms, which may enable atomic level control over the structure of functionalized interfaces for various applications related to catalysis, semiconductors, and energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Water-promoted interfacial pathways in methane oxidation to methanol on a CeO 2 -Cu 2 O catalyst

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the pro­motion of this reaction by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from carbon monoxide and carbon dioxide to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to methane and oxygen led to surface methoxy groups and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations, which showed that water preferentially dissociates over the active cerium ions at the CeO 2 –Cu 2 O/Cu(111) interface. The adsorbed hydroxyl species blocked O-O bond cleavage that would dehydrogenate methoxy groups to carbon monoxide and carbon dioxide, and it directly converted this species to methanol, while oxygen reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Wall catalysis experiment on AFE

This paper describes the wall catalysis experiment which is planned as part of the Aeroassist Flight experiments (AFE) that will be flown from the Space Shuttle Orbiter in late 1993. Research on candidate high-catalytic efficiency overcoats for the experiment conducted in an arc-jet air stream are discussed. The temperature distribution over the AFE heat shield is also predicted using a reacting boundary layer solution that includes surface kinetics and optical properties determined from these tests.

Stewart, David A.↗
NASA NTRS1989

Mineral catalysis of the formation of the phosphodiester bond in aqueous solution - The possible role of montmorillonite clays

The possible role of montmorillonite clays in the spontaneous formation on the primitive earth of the phosphodiester bond in the presence of water was investigated in experiments measuring the binding of various nucleosides and nucleotides with Na(+)-montmorillonite 22A and the reactions of these compounds with a water-soluble carbodiimide. It was found that, at neutral pH, adenine derivatives bind stronger than the corresponding uracil derivatives, consistent with the protonation of the adenine by the acidic clay surface and a cationic binding of the protonated ring to the anionic clay surface. The reaction of the 5-prime-AMP with carbodiimide resulted in the formation of 2-prime,5-prime-pApA (18.9 percent), 3-prime,5-prime-pApA (11 percent), and AppA (4.8 percent). The yields of these oligomers obtained when poly(U) was used in place of the clay were 15.5 percent, 3.7 percent, and 14.9 percent AppA, respectively.

Ferris, James P.↗
DOE OSTI2020

The role of atomic carbon in directing electrochemical CO (2) reduction to multicarbon products

Electrochemical reduction of carbon-dioxide/carbon-monoxide (CO (2) R) to fuels and chemicals presents an attractive approach for sustainable chemical synthesis, but it also poses a serious challenge in catalysis. Understanding the key aspects that guide CO (2) R towards value-added multicarbon (C 2+ ) products is imperative in designing an efficient catalyst. Herein, we identify the critical steps toward C 2 products on copper through a combination of energetics from density functional theory and micro-kinetic modeling. We elucidate the importance of atomic carbon in directing C 2+ selectivity and how it introduces surface structural sensitivity on copper catalysts. Overall, this insight enables us to propose two simple thermodynamic descriptors that effectively identify C 2+ selectivity on metal catalysts beyond copper and hence it defines an intelligible protocol to screen for materials that selectively catalyze CO (2) to C 2+ products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

M-Edge Spectroscopy of Transition Metals: Principles, Advances, and Applications

M-edge X-ray absorption spectroscopy (XAS), which probes 3p→3d transitions in first-row transition metals, provides detailed insights into oxidation states, spin-states, and local electronic structure with high element and orbital specificity. Operating in the extreme ultraviolet (XUV) region, this technique provides sharp multiplet-resolved features with high sensitivity to ligand field and covalency effects. Compared to K- and L-edge XAS, M-edge spectra exhibit significantly narrower full widths at half maximum (typically 0.3–0.5 eV versus >1 eV at the L-edge and >1.5–2 eV at the K-edge), owing to longer 3p core-hole lifetimes. M-edge measurements are also more surface-sensitive due to the lower photon energy range, making them particularly well-suited for probing thin films, interfaces, and surface-bound species. The advent of tabletop high-harmonic generation (HHG) sources has enabled femtosecond time-resolved M-edge measurements, allowing direct observation of ultrafast photoinduced processes such as charge transfer and spin crossover dynamics. This review presents an overview of the fundamental principles, experimental advances, and current theoretical approaches for interpreting M-edge spectra. We further discuss a range of applications in catalysis, materials science, and coordination chemistry, highlighting the technique’s growing impact and potential for future studies.

M-edge XANES↗
DOE OSTI2024

The evolution of model Rh/Fe 3 O 4 (001) catalysts in hydrogen environments

Single metal atoms dispersed on oxides are a new emerging class of catalysts owing to their unique electronic and chemical properties. Here, in this study, we have prepared a series of model single-atom catalysts possessing well-characterized Rh sites that include Rh adatoms (Rh ad ), mixed surface layers with octahedrally-coordinated Rh (Rh oct ), as well as metallic Rh clusters and nanoparticles (Rh met ) on Fe 3 O 4 (001). Using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), we investigated the activity of such model systems towards H2 and their stability in reducing environments. Our results show that the atomically dispersed Rhad and Rhoct species do not activate H 2 , which would result in the formation of surface hydroxyls on Fe 3 O 4 (001). In contrast, the presence of Rh met in H 2 results in the formation of hydroxyls and subsequent etching of the Fe 3 O 4 (001) at higher temperatures (≥ 500 K) due to water formation via the Mars-van Krevelen mechanism. Additionally, such surface etching leads to the release of the Rh oct from the surface lattice and their sintering to Rh met . To bridge the material gap between the surface science models and high surface area catalysts, we perform parallel studies on powder Rh/Fe 3 O 4 catalysts. The XPS characterization shows remarkable similarities between these systems. Further, our surface science studies provide an atomistic picture of the behavior of high surface area catalysts in the H 2 atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fine-Tuning of Pt Dispersion on Al 2 O 3 and Understanding the Nature of Active Pt Sites for Efficient CO and NH 3 Oxidation Reactions

Fine-tuning the dispersion of active metal species on widely used supports is a research hotspot in the catalysis community, which is vital for achieving a balance between the atomic utilization efficiency and the intrinsic activity of active sites. In this work, using bayerite Al(OH) 3 as support directly or after precalcination at 200 or 550 °C, Pt/Al 2 O 3 catalysts with distinct Pt dispersions from single atoms to clusters (ca. 2 nm) were prepared and evaluated for CO and NH 3 removal. Richer surface hydroxyl groups on AlO x (OH) y support were proved to better facilitate the dispersion of Pt. However, Pt/Al 2 O 3 with relatively lower Pt dispersion could exhibit better activity in CO/NH 3 oxidation reactions. Further reaction mechanism study revealed that the Pt sites on Pt/Al 2 O 3 with lower Pt dispersion could be activated to Pt 0 species much easier under the CO oxidation condition, on which a higher CO adsorption capacity and more efficient O 2 activation were achieved simultaneously. Compared to Pt single atoms, PtO x clusters could also better activate NH 3 into –NH 2 and –HNO species. The higher CO adsorption capacity and the more efficient NH 3 /O 2 activation ability on Pt/Al 2 O 3 with relatively lower Pt dispersion well explained its higher CO/NH 3 oxidation activity. This study emphasizes the importance of avoiding a singular pursuit of single-atom catalyst synthesis and instead focusing on achieving the most effective Pt species on Al 2 O 3 support for targeted reactions. Finally, this approach avoids unnecessary limitations and enables a more practical and efficient strategy for Pt catalyst fabrication in emission control applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Transition Metal Dichalcogenides as Effective Catalysts for High-Rate Lithium–Sulfur Batteries

In today’s renaissance of high energy density secondary batteries, lithium-sulfur (Li-S) batteries represent one of the most promising candidates for the next generation of renewable energy storage systems, due to sulfur’s high theoretical specific capacity of 1675 mAh g -1 and high earth abundance. However, despite decades of study, the issues associated with capacity fade via the polysulfide shuttle and sluggish kinetics remain. Through a rigorous and detailed electrochemical study of lithium polysulfides via rotating disk electrode voltammetry (RDE), we have investigated the kinetics of the redox reactions, and explored candidate catalysts to potentially overcome/mitigate the polysulfide shuttle effect. From these RDE studies, supported by comprehensive electronic-structure calculations of conversion-type surface reactions, we determined that WSe 2 can effectively catalyze the polysulfide redox reaction, though further studies are necessary to improve overall Li-S battery performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Kinetics and Reaction Mechanisms of Acetic Acid Hydrodeoxygenation over Pt and Pt–Mo Catalysts

In this work, kinetic measurements for silica-supported Pt and Pt-Mo catalysts were collected in vapor-phase acetic acid hydrodeoxygenation by varying the hydrogen partial pressure between 18 and 72 kPa and acetic acid partial pressure between 7 and 18 kPa at 423-473 K. At all testing conditions, the Pt-Mo catalyst was more active and selective. In addition, the apparent activation energy for Pt-Mo of 76±3 kJ/mol was lower than that of 84±4 kJ/mol for Pt. The apparent reaction orders were also different. The order in hydrogen of 0.8±0.1 for Pt-Mo changed to zero at higher hydrogen partial pressures while that for Pt remained constant at 0.6±0.1. A near-zero order in acetic acid for Pt-Mo changed to -2.1 at higher acetic acid pressures while that for Pt remained constant at -2.9±0.3. These differences in reaction kinetics as well as in selectivity trends with changes in temperature and feed composition indicated a change in the reaction mechanism for Pt-Mo. The catalysts were characterized with hydrogen temperature programmed desorption, oxygen temperature programmed oxidation and transmission electron microscopy with energy-dispersed X-ray spectroscopy elemental mapping. Mo was present in the form of subnanometer-size clusters on the surface of Pt nanoparticles. Both Pt and Pt-Mo catalysts were stable under the reaction conditions for 10 h, and the size and structure of Pt and Pt-Mo particles remained mostly unchanged, without coke accumulation. Density functional theory calculations show that surface acetate is not a major reaction intermediate on both Pt and Pt-Mo and, instead, C-OH bond splitting with the formation of acetyl is the first reaction step in hydrodeoxygenation. The activation energy for this step is dramatically lower on Pt-Mo. Furthermore, the activity of acetyl on Pt-Mo is different. Unlike on pure Pt, the reaction of C-O bond splitting becomes exothermic with a lower activation energy on Pt-Mo, and the reaction of C-C bond splitting, in contrast, becomes endothermic with a higher activation energy, explaining the experimentally observed higher activities and selectivities of Pt-Mo. In addition, the calculations demonstrate that a pair of Pt-Mo surface atoms acts as a single active site where Mo serves as a preferential binding anchor for O atoms. The presence of Mo atoms changes the structure and energy of adsorbed and reacting surface species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular-scale Insights into Cooperativity Switching of x TAB Adsorption on Gold Nanoparticles

Quantifying adsorption behaviors is crucial for various applications such as catalysis, separation, and sensing, yet it is generally challenging to access in solution. Here, we report a combined experimental and computational study of the adsorption behaviors of alkyl-trimethylammonium bromides (xTAB), a class of ligands important for colloidal nanoparticle stabilization and shape control, with various alkyl chain lengths x on Au nanoparticles. We use density functional theory (DFT) to calculate xTAB binding energies on Au{111} and Au{110} surfaces with standing-up and lying-down configurations, which provides insights into the adsorption affinity and cooperativity differences of xTAB on these two facets. We demonstrate the key role of van der Waals interactions in determining the xTAB adsorption behavior. These computational results predict and explain the experimental discovery of xTAB’s adsorption behavior switch from stronger affinity, negative cooperativity to weaker affinity, positive cooperativity when the concentration of xTAB increases in solution. We also show that in the standing-up configuration, bilayer adsorption may occur on both facets, which can lead to different differential binding energies and consequently adsorption crossover between the two facets when the ligand concentration increases. Our combined experimental and computational approaches demonstrate a paradigm for gaining molecular-scale insights into adsorbate–surface interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revisiting Understanding of Electrochemical CO 2 Reduction on Cu(111): Competing Proton-Coupled Electron Transfer Reaction Mechanisms Revealed by Embedded Correlated Wavefunction Theory

Copper (Cu) electrodes, as the most efficacious of CO 2 reduction reaction (CO 2 RR) electrocatalysts, serve as prototypes for determining and validating reaction mechanisms associated with electrochemical CO 2 reduction to hydrocarbons. As in situ electrochemical mechanism determination by experiments is still out of reach, such mechanistic analysis typically is conducted using density functional theory (DFT). The semilocal exchange-correlation (XC) approximations most often used to model such catalysis unfortunately engender a basic error: predicting the wrong adsorption site for CO (a key CO 2 RR intermediate) on the most ubiquitous facet of Cu, namely, Cu(111). This longstanding inconsistency casts lingering doubt on previous DFT predictions of the attendant CO 2 RR kinetics. Here, we apply embedded correlated wavefunction (ECW) theory, which corrects XC functional error, to study the CO 2 RR on Cu(111) via both surface hydride (*H) transfer and proton-coupled electron transfer (PCET). We predict that adsorbed CO (*CO) reduces almost equally to two intermediates, namely, hydroxymethylidyne (*COH) and formyl (*CHO) at –0.9 V vs the RHE. In contrast, semilocal DFT approximations predict a strong preference for *COH. With increasing applied potential, the dominance of *COH (formed via potential-independent surface *H transfer) diminishes, switching to the competitive formation of both *CHO and *COH (both formed via potential-dependent PCET). Furthermore, our results also demonstrate the importance of including explicitly modeled solvent molecules in predicting electron-transfer barriers and reveal the pitfalls of overreliance on simple surface *H transfer models of reduction reactions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Stabilization of Catalytically Active Surface Defects on Ga-doped La–Sr–Mn Perovskites for Improved Solar Thermochemical Generation of Hydrogen

Solar thermochemical hydrogen (STCH) production from water splitting typically requires performing redox cycles at temperatures above 1200 °C to reduce and re-oxidize the bulk of a reversible material. Bulk processes such as oxygen vacancy formation and oxygen diffusion energies dictate the viability of a material for STCH. The surface plays an important role in the formation and destruction of vacancies and interacts with gas phase water and surface adsorbed species. These surface processes can lead to surface reconfigurations and even the formation of surface phases with stoichiometry and oxygen content very different from the bulk composition. Understanding in-situ the surface chemical state and its evolution under water splitting is important to design nonstoichiometric oxides capable of longer-lasting STCH generation at lower temperatures. In this work, we describe the water splitting active defect sites in LSM ((La 0.65 Sr 0.35 ) 0.95 MnO 3–δ ) and Ga-doped LSM ((La 0.6 Sr 0.4 ) 0.95 (Mn 0.8 Ga 0.2 )O 3–δ ) perovskites during Operando thermochemical water splitting conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) experiments at 800 °C under steam. We show that sub-stoichiometric La +3 in the oxygen-vacancy rich surface at operating conditions can be used to correlate surface water splitting activity and the creation of surface hydroxide intermediates. The addition of Ga in LSM is shown to drastically stabilize the surface chemical composition by preventing Sr segregation and stabilizing catalytically active surface defects that promote the binding of adsorbed hydroxides. Here, we use Operando AP-XPS quantification of metastable surface hydroxide intermediates (La(OH) 3 ) to determine the amount of catalytically active surface sites in LSM (2.9%) and in LSMG (7.8–8.1%, depending on the bulk oxidation state).

08 HYDROGEN↗
DOE OSTI2021

Defect-driven selective metal oxidation at atomic scale

Nanoscale materials modified by crystal defects exhibit significantly different behaviours upon chemical reactions such as oxidation, catalysis, lithiation and epitaxial growth. However, unveiling the exact defect-controlled reaction dynamics (e.g. oxidation) at atomic scale remains a challenge for applications. Here, using in situ high-resolution transmission electron microscopy and first-principles calculations, we reveal the dynamics of a general site-selective oxidation behaviour in nanotwinned silver and palladium driven by individual stacking-faults and twin boundaries. The coherent planar defects crossing the surface exhibit the highest oxygen binding energies, leading to preferential nucleation of oxides at these intersections. Planar-fault mediated diffusion of oxygen atoms is shown to catalyse subsequent layer-by-layer inward oxide growth via atomic steps migrating on the oxide-metal interface. These findings provide an atomistic visualization of the complex reaction dynamics controlled by planar defects in metallic nanostructures, which could enable the modification of physiochemical performances in nanomaterials through defect engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cryogenic Carbon Monoxide Oxidation on Cuprous Oxide

Performing oxidation reactions at low temperatures using earth-abundant materials is crucial for advancing solutions for sustainable chemistry. CO oxidation serves as a benchmark reaction to characterize oxidation and to advance fundamental concepts in surface chemistry. While there are several examples of CO oxidation occurring on metal oxides at low temperatures, from 300 K to ∼200 K, reactivity in the cryogenic temperature regime typically requires a metal nanoparticle on a metal oxide. Here, we show oxygen atoms on the (111) facet of Cu 2 O react with CO to form CO 2 at temperatures below 100 K. Combining spectroscopic experimental evidence with calculations, we propose a low barrier path for CO oxidation at reconstructed surface sites on Cu 2 O(111). This finding is a rare example of an earth-abundant metal oxide, in this case copper, that can provide highly reactive multifunctional sites, enabling both adsorption and reaction fundamental steps toward the efficient heterogeneous oxidation of chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Boosting Hydrogenation of CO 2 Using Cationic Cu Atomically Dispersed on 2D γ‐Al 2 O 3 Nanosheets

The continuous development of novel catalytic approaches is crucial for advancing efficient CO 2 hydrogenation processes. Drawing inspiration from single-atom catalysis and 2D materials, we designed a new 2D single-atom catalyst with excellent thermal stability by thermally treating Cu-adsorbed γ-AlOOH nanosheets, which yielded a Cu/γ-Al 2 O 3 catalyst with high activity in the hydrogenation of CO 2 -yielding methanol (CH 3 OH), dimethyl ether (DME), and CO as products. The active Cu sites are monodispersed and highly stable due to their cationic oxidation state and their substitution for pentacoordinated aluminum (Al P ) sites on particle surfaces. This study demonstrates an efficient approach for achieving a high CO 2 hydrogenation rate (30.45 mol mol −1 h −1 ) using a catalyst system that lacks metallic Cu centers, traditionally considered essential for H₂ dissociation, and employs what was previously thought to be an inert metal oxide (γ-Al 2 O 3 ) for CO and CH 3 OH production. Ongoing mechanistic studies aim to elucidate the synergy between cationic Cu single atoms and γ-Al 2 O 3 , a Lewis acid support, in facilitating hydrogen (H 2 ) activation and methanol formation.

2D catalyst↗