Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Recent developments in monolithic phase-locked semiconductor laser arrays

Coherent combination of the power of several semiconductor lasers fabricated on the same substrate has been the subject of an intense research effort in recent years, the main motivation being to obtain higher power levels than those available from a single laser in a stable radiation pattern. Best results reported so far include 2.6 watts CW emitted power and less than 1 deg far-field angle (in the array plane) in arrays where all the lasers are electrically connected in parallel. A different type of coherent array, where each element has a separate contact, has been recently demonstrated. While requiring the more complex two-level metallization technology, applying a separate contact to each laser provides an additional degree of freedom in the design and the operation of monolithic arrays. The separate contacts can be employed to tailor the near-field and far-field distributions and to compensate for device-to-device nonuniformities. Furthermore, the control of the currents of the array elements allows the performance of a variety of other functions, such as beam scanning, spectral mode control, wavelength tuning and control of the mutual coherence between array elements.

Katz, J.↗

Testing of an Optical Fiber--Based Gamma Thermometer in the High Flux Isotope Reactor Gamma Irradiation Facility

This report describes the design, thermal modeling, and gamma irradiation testing of an optical fiber–based gamma thermometer (OFBGT), which was irradiated in the High Flux Isotope Reactor (HFIR) Gamma Irradiation Facility (GIF). OFBGTs are a promising technology for application in nuclear reactors because they can provide a distributed measurement of gamma ray heating rate, unlike thermocouple-based gamma thermometers, which are fixed in-core sensors that can be used in boiling water reactors to calibrate local power range monitors. OFBGTs measure gamma ray heating rate by measuring the temperature difference between a pair of optical fibers; one fiber is in thermal contact with a heat sink (usually the reactor coolant), and the other is in thermal contact with a thermally isolated mass. The device can be calibrated with a heating wire within the thermal mass. The OFBGT that was designed and fabricated at Oak Ridge National Laboratory can measure distributed gamma ray heating rate over an effective measurement length of 61 cm, and the outer diameter of the sensor is 12.7 mm, giving the prototypical sensor design a relatively small footprint. The sensor housing is backfilled with Ar to ensure a well-predicted thermal response that is not affected by humidity or chemical interactions during operation. For calibration, the sensor design uses a Ni–Cr wire, which can be supplied with currents from 0 to 1 A to capture the wide range of potential gamma ray heating rates expected in HFIR’s spent fuel elements. The OFBGT was thermally modeled analytically and numerically; both models account for temperature-dependent thermal conductivities of the materials and show good agreement. The thermal response of the sensor inside spent HFIR fuel elements was simulated for times up to 1 year after discharge of the fuel element. Out-of-pile open-air tests indicated that the steady-state response of the sensor matches modeled results within experimental uncertainty. Calibration tests were performed using electrical heating in the HFIR spent fuel pool, above the fuel elements, to establish a relationship between the difference in spectral shift measured by optical fibers located inside and outside the OFBGT and the applied electrical heating. Subsequently, the OFBGT was placed within the the spent fuel element from HFIR cycle 501 to measure the spatial profile of the gamma heating rates. Results showed good agreement between the theoretical and measured gamma dose rate profiles, with maximum deviations of ~10% or less.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

MinMap: An imaging spectrometer for high resolution compositional mapping of the Moon

MinMap has been selected by the Lunar Scout program to characterize and map the mineral composition of the Moon. The instrument will be built as a collaborative effort between Brown University, SETS Technology Inc., and Ball Aerospace Corp. MinMap is a visible to near-infrared imaging spectrometer that contains 192 spectral channels from 0.35-2.4 microns with signal to noise greater than 200 and 256 cross-track spatial elements. The spectrometer design has a 6 deg field of view (FOV) and utilizes grating dispersive elements and two dimensional detectors (no moving parts). An 'image cube' of data is produced that contains two dimensions of spatial information and one dimension of spectral information. All spectral channels and cross-track spatial elements are recorded simultaneously with spacecraft motion scanning the second spatial dimension. The high spectral resolution and continuous spectral range of MinMap are designed to measure the diagnostic absorption features of principal lunar minerals and their lithologic mixtures. Since the optical properties of lunar materials change in a regular manner upon exposure to the space environment, this spectral range is also quite sensitive to variations in exposure history (soil maturity). Nominal measurement stragegy is to obtain full global data of the Moon at 180 m/pixel from a 450 km polar orbit during the first month or two of operation. A 100 km orbit is anticipated for the remaining part of a 1 year mission allowing higher resolution data (approx. 80 m/pixel) to be obtained for targeted regions. MinMap exceeds LE x SWG's measurement recommendations and will provide the highest spatial resolution compositional map of lunar rocks and soils currently planned for orbital missions. Since all spectral channels are co-registered and obtained simultaneously, 'image cube' data swaths will be available for analysis almost immediately.

Pieters, C. M.↗

Method and apparatus for mapping the distribution of chemical elements in an extended medium

Contaminants in an extended medium such as the wall of a building are mapped by locating neutron excitation source on one side of the wall and a gamma ray spectrometer, including a gamma ray detector on the opposite side of the wall facing the excitation source. The source and detector are moved in unison in discrete steps over opposing wall surfaces so as to determine the chemical composition of the elements in a hemispheric region of the wall adjacent the detector with the radius of the region being substantially that of the mean free path distance of gamma rays emitted from elements interacting with neutrons on the detector side of the wall. The source and detector are reversed for relatively thick walls for mapping the distribution of elements on the other side of the wall thickness. The output of the detector is fed to a multichannel pulse height analyzer where the intensity of the various gamma ray spectral lines are indicated relative to a dominant constituent element such as silicon. Resolution of anomalies such as the presence of voids and/or determining the bulk density of the medium is achieved by substituting a gamma ray source technique is also applied to metal alloys, such as iron alloys, in either the solid or molten state.

Evans, L. G.↗

A priori error estimates for an hp-version of the discontinuous Galerkin method for hyperbolic conservation laws

A priori error estimates are derived for hp-versions of the finite element method for discontinuous Galerkin approximations of a model class of linear, scalar, first-order hyperbolic conservation laws. These estimates are derived in a mesh dependent norm in which the coefficients depend upon both the local mesh size h(sub K) and a number p(sub k) which can be identified with the spectral order of the local approximations over each element.

Bey, Kim S.↗

SUPERNOVA EJECTA IN THE YOUNGEST GALACTIC SUPERNOVA REMNANT G1.9+0.3

G1.9+0.3 is the youngest known Galactic supernova remnant (SNR), with an estimated supernova (SN) explosion date of {approx}1900, and most likely located near the Galactic center. Only the outermost ejecta layers with free-expansion velocities {approx}>18,000 km s{sup -1} have been shocked so far in this dynamically young, likely Type Ia SNR. A long (980 ks) Chandra observation in 2011 allowed spatially resolved spectroscopy of heavy-element ejecta. We denoised Chandra data with the spatio-spectral method of Krishnamurthy et al., and used a wavelet-based technique to spatially localize thermal emission produced by intermediate-mass elements (IMEs; Si and S) and iron. The spatial distribution of both IMEs and Fe is extremely asymmetric, with the strongest ejecta emission in the northern rim. Fe K{alpha} emission is particularly prominent there, and fits with thermal models indicate strongly oversolar Fe abundances. In a localized, outlying region in the northern rim, IMEs are less abundant than Fe, indicating that undiluted Fe-group elements (including {sup 56}Ni) with velocities >18,000 km s{sup -1} were ejected by this SN. However, in the inner west rim, we find Si- and S-rich ejecta without any traces of Fe, so high-velocity products of O-burning were also ejected. G1.9+0.3 appears similar to energetic Type Ia SNe such as SN 2010jn where iron-group elements at such high free-expansion velocities have been recently detected. The pronounced asymmetry in the ejecta distribution and abundance inhomogeneities are best explained by a strongly asymmetric SN explosion, similar to those produced in some recent three-dimensional delayed-detonation Type Ia models.

79 ASTRONOMY AND ASTROPHYSICS↗

Approach to using 3D laser-induced breakdown spectroscopy (LIBS) data to explore the interaction of FLiNaK and FLiBe molten salts with nuclear-grade graphite

Nuclear graphite has historically been a key component of many nuclear reactor designs and has emerged as key to numerous advanced nuclear reactor design concepts. Molten salt reactors (MSRs) are one broad group of advanced reactor designs currently being pursued by industry for commercialization. Several MSR designs under consideration use graphitic materials that directly interface with a molten salt, whether it is a fuel salt, coolant salt, or both. Therefore, the interaction of graphite materials with molten salts must be understood. To gain this required understanding, a range of data is needed including porosity, strength, and composition as a function of different salt exposure parameters. In this study, a laser-induced breakdown spectroscopy (LIBS) measurement and data analysis methodology was developed to obtain spatially resolved elemental composition information for graphite samples exposed to a molten fluoride salt. Traditional univariate emission line analysis of atomic, ionic, and molecular optical emission signals was coupled via correlation analysis with spectral decomposition of the data using principal component analysis. Elemental depth profiling and elemental mapping were also performed to visualize salt–graphite interactions. LIBS was demonstrated to be useful for measuring key analytes such as fluorine and hydrogen, which are troublesome for other analysis techniques. Evidence for complex behavior was found, thereby demonstrating the usefulness of the developed approach for future systematic studies.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparison of Numerical Methods for Modeling the Wave Field Effects Generated by Individual Wave Energy Converters and Multiple Converter Wave Farms

This numerical study compares the wave field generated by the spectral wave action balance code, SNL-SWAN, to the linear-wave boundary-element method (BEM) code, WAMIT. The objective of this study is to assess the performance of SNL-SWAN for modeling wave field effects produced by individual wave energy converters (WECs) and wave farms comprising multiple WECs by comparing results from SNL-SWAN with those produced by the BEM code WAMIT. BEM codes better model the physics of wave-body interactions and thus simulate a more accurate near-field wave field than spectral codes. In SNL-SWAN, the wave field’s energy extraction is modeled parametrically based on the WEC’s power curve. The comparison between SNL-SWAN and WAMIT is made over a range of incident wave conditions, including short-, medium-, and long-wavelength waves with various amounts of directional spreading, and for three WEC archetypes: a point absorber (PA), a pitching flap (PF) terminator, and a hinged raft (HR) attenuator. Individual WECs and wave farms of five WECs in various configuration were studied with qualitative comparisons made of wave height and spectra at specific locations, and quantitative comparisons of the wave fields over circular arcs around the WECs as a function of radial distance. Results from this numerical study demonstrate that in the near-field, the difference between SNL-SWAN and WAMIT is relatively large (between 20% and 50%), but in the far-field from the array the differences are minimal (between 1% and 5%). The resultant wave field generated by the two different numerical approaches is highly dependent on parameters such as: directional wave spreading, wave reflection or scattering, and the WEC’s power curve.

16 TIDAL AND WAVE POWER↗

Surface analysis insight note: Illustrating the effect of adventitious contamination on Pt photoemission peak intensities

Adventitious carbon contaminations are not only omnipresent and used for charge referencing of XPS spectra but also can alter the apparent presence of the element peaks that span over the large spectral window of binding energies. This Insight note describes the effect of an adventitious contamination layer on Pt and presents, in brief, the approach whereby the component spectra are derived for ion beam cleaned Pt samples that can then utilize linear mathematics to peak fit said spectra thus quantifying the amount of each component including that assigned to the contamination itself of Pt metal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification and Characterization of Herbicide Penoxsulam Transformation Products in Aqueous Media by UPLC-QTOF-MS

Photodegradation is an important non-biodegradation process of pesticide degradation in aquatic environments. In this study, the effect of different forms of nitrogen on the photodegradation kinetics of penoxsulam was investigated. The photodegradation of penoxsulam was accelerated by NO{sup 3−} and NO{sup 2−} but was not affected by NH{sup 4+}. Ultra-high-performance liquid chromatography coupled with time-of-flight mass spectrometry was used to separate and identify the transformation products (TPs)converted by photodegradation of penoxsulam in an aqueous solution under UV–Vis (290–800 nm) irradiation. Seven major transformation products were identified based on mass spectral data. The structure was determined by elemental composition calculations, comparison of structural analogs, and existing literature. The main pathways of photodegradation were found to be sulfonamide bond cleavage, rearrangement, triazole ring cleavage, and hydroxylation. These findings are critical to elucidate the environmental fate of penoxsulam in aquatic ecosystems and provide a basis for further environmental risk assessment.

54 ENVIRONMENTAL SCIENCES↗

Orientational Dependence of Cofacial Porphyrin–Quinone Electronic Interactions within the Strong Coupling Regime

We examine the relative magnitudes of electronic coupling HDA in two face-to-face rigid and diastereomeric (porphinato)zinc(II)–quinone (PZn–Q) as-semblies, 1β-ZnA and 1β-ZnB, in which the six quinonyl carbon atoms lie in virtually identical arrangements relative to the PZn plane at sub-van der Waals donor–acceptor (D–A) interplanar separations. Steady-state and time-resolved transient optical data and computational studies show that minor differences in relative D–A cofacial orientation give rise to disparate H DA magnitudes for both photoinduced charge separation (CS) and thermal charge recombination (CR). Here, time-dependent density functional theory (TDDFT) computations illuminate the nature of direct charge transfer states and the electronic structural factors that give rise to these differential H DA s. These data show more extensive mixing of locally excited (LE) and CS states in 1β-ZnA relative to 1β-ZnB and that these H DA differences track the magnitudes of electronic coupling matrix elements determined from steady-state electronic spectral data and thermal CR rate constants measured via pump–probe spectroscopy. Collectively, this work shows that electron transfer dynamics may be manipulated in cofacial D–A systems, even at sub-van der Waals contact, provided that conformational rigidity precludes structural fluctuations that modulate D–A interactions on the charge transfer time scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long-period fibre grating writing with a slit-apertured femtosecond laser beam (λ = 1026 nm)

We report on long-period grating (LPG) writing in a standard telecom fibre, SMF-28e+, via refractive index modification by femtosecond pulses. A method is proposed for grating writing with a slit-apertured beam, which enables one to produce LPGs with reduced background losses and a resonance peak markedly stronger than that in the case of grating writing with a Gaussian beam. The method can be used to fabricate LPGs for use as spectral filters of fibre lasers and sensing elements of sensor systems. (fibre and integrated-optical structures)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

ML-Based Pebble Power Reconstruction for Pebble Bed Reactor Analysis

Pebble power reconstruction has been explored to complement the conventional homogenized modeling approach in pebble bed reactor (PBR) analysis, as detailed heterogeneous geometry calculations are computationally expensive. The random distribution of pebble fuels within the core challenges the application of conventional pin power reconstruction methods. To address this, we introduce a machine learning approach based on the transformer model, composed of encoder and decoder layers, to estimate the flux and power form functions for reconstructing individual pebble neutron fluxes and powers. The homogeneous neutron flux distribution within each spectral zone (SZ) is obtained from finite element solutions of global diffusion or transport calculations. Verification tests demonstrate that the trained transformer model accurately predicts power form functions over a range of conditions, including variations in pebble enrichment, location, type, SZ size, and burnup. In particular, verification using a three-dimensional PBR benchmark with burned pebbles shows good agreement in heterogeneous pebble power distributions between Griffin and Serpent. These results highlight the potential of applying conventional pin power reconstruction approaches to PBR cores with randomly distributed pebbles.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Actinide opacities for modelling the spectra and light curves of kilonovae

ABSTRACT We extend previous ab initio calculations of lanthanide opacities to include a complete set of actinide opacities for use in the modelling of kilonova (KN) light curves and spectra. Detailed, fine-structure line features are generated using the configuration-interaction approach. These actinide opacities display similar trends to those observed for lanthanide opacities, such as the lighter actinides producing higher opacity than the heavier ones for relevant conditions in the dynamical ejecta. A line-binned treatment is employed to pre-compute opacity tables for 14 actinide elements (89 ≤ Z ≤ 102) over a grid of relevant temperatures and densities. These tabular opacities will be made publicly available for general usage in KN modelling. We demonstrate the usefulness of these opacities in KN simulations by exploring the sensitivity of light curves and spectra to different actinide abundance distributions that are predicted by different nuclear theories, as well as to different choices of ejecta mass and velocity. We find very little sensitivity to the two considered distributions, indicating that opacities for actinides with Z ≥ 99 do not contribute strongly. On the other hand, a single actinide element, protactinium, is found to produce faint spectral features in the far-infrared at late times (5–7 d post merger). More generally, we find that the choice of ejecta mass and velocity have the most significant effect on KN emission for this study.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigations of Beam Dynamics Issues at Current and Future Hadron Accelerators (Final Report)

There is a synergy between the fields of Beam Dynamics (BD) in modern particle accelerators and Applied Mathematics (AMa). We have formulated significant problems in BD and have developed and applied tools within the contexts of dynamical systems, topological methods, numerical analysis and scientific computing, probability and stochastic processes, and mathematical statistics. We summarize the three main areas of our AMa work since 2011. First, we continued our study of Vlasov-Maxwell systems. Previously, we developed a state of the art algorithm and code (VM3@A) to calculate coherent synchrotron radiation in single pass systems. In this cycle we carefully analyzed the major expense, namely the integral-over-history (IOH), and developed two approaches to speed up integration. The first strategy uses a representation of the Bessel function J0 in terms of exponentials. The second relies on “local sequences” developed recently for radiation boundary conditions, which are used to reduce computational domains. Although motivated by practicality, both strategies involve interesting and rather deep analysis and approximation theory. As an alternative to VM3@A, we are integrating Maxwell’s equations by a time-stepping method, bypass- ing the IOH, using a Discontinuous Galerkin (DG) method. DG is a generalization of Finite Element and Finite Volume methods. It is spectrally convergent, unlike the commonly used Finite Difference methods, and can handle complicated vacuum chamber geometries. We have applied this in several contexts and have obtained very nice results including an explanation of an experiment at the Canadian Light Source, where the geometry is quite complex. Second, we continued our study of spin dynamics in storage rings. There is much current and proposed activity where spin polarized beams are being used in testing the Standard Model and its modifications. Our work has focused on invariant spin fields (ISFs) and amplitude dependent spin tunes (ADSTs), which are essential for estimating beam polarization. Several algorithms have been developed since the 1980s for computing the ISF, among them the Heinemann- Hoffstaetter method of stroboscopic averaging (SA) which is implemented in the code SPRINT. SA, which computes the ISF by using spin tracking data, can find the ISF to computer precision if it exists and thus can give evidence for existence of the ISF. Central to our work is resolving the ISF conjecture, which says that, off orbital resonance, an ISF exists. Thus Heinemann developed, in his 2010 PhD thesis, a new framework which unifies and generalizes the notions of ISF and ADST by using bundle theory. This lead to a long paper which was a major collaborative effort during the recent cycle. In a nutshell, our bundle approach elegantly unifies the dynamics of spin-1/2 and spin-1 particles, e.g., protons and deuterons. In fact it is well known that these two kinds of dynamics are driven by the same spin transfer matrix and in our approach one sees the deeper reason for this: the spin transfer matrix carries the natural dynamics of a principal bundle whereas the difference between the spin-1/2 and spin-1 dynamics lies in their different geometrical situation, i.e., different underlying associated bundles. Thus one arrives at new results for polarized beams, among them the Invariant Reduction Theorem (IRT) and the Cross Section Theorem (CST). The IRT gives a necessary and sufficient condition for the ISF to exist. The SA technique revealed, 20 years ago, that each ISF can be viewed as a complex agglomerate of spin tracking data. The bundle approach goes one step further by using the IRT and the CST to glue spin tracking data into agglomerates which are candidates for ISFs. We gain insight because the “good” agglomerates, in the presence of an ISF, are very different from the “bad” ones. Finally we mention that the bundle approach has analogies to the approach used in geometrical Yang-Mills theory. Third, we studied X-Ray Free Electron Lasers (FELs), which are electron accelerators producing coherent undulator radiation over a wide range of frequencies from microwaves to x-rays. The photon beams produced in FEL undulators are used to study material samples in biology, material science etc. We developed a mathematical analysis, based on the 6D Lorentz system, of energetic electrons moving through a planar undulator excited by a Maxwell traveling wave field of wavelength λ. Our Method of Averaging perturbation analysis yields non-resonant and near-to-resonant normal form approximations as a function of λ, which we present in two averaging theorems. We prove the theorems in detail, error bounds and giving a tutorial on mathematically rigorous perturbation theory in a context where proofs are easily understood. To our knowledge the planar problem has not been analyzed with the generality here nor has the standard FEL pendulum system, which appears on resonance, been derived with error bounds. In addition to the domains of validity of the normal forms we obtain new insights that require further study, including a more general low gain theory. With a firm foundation in the non-collective case above we are studying the 3D collective case from start up from noise to high gain and saturation. We have formulated the noise start up as a problem of going from the microscopic Klimontovich-Maxwell to the macroscopic Vlasov-Maxwell with a Vlasov correction term. In the 1D setting, we seek an alternative to the phenomenological Vlasov approach which models shot noise by a perturbation on an initial “smooth” density. The 1D wave equation with a Klimontovich source is often the starting point for the 1D FEL high gain theory. We have a new representation of solutions which may lead to new insights.

43 PARTICLE ACCELERATORS↗

Calculations of the heights, periods, profile parameters, and energy spectra of wind waves

Sea wave behavior calculations require the precalculation of wave elements as well as consideration of the spectral functions of ocean wave formation. The spectrum of the random wave process is largely determined by the distribution of energy in the actual wind waves observed on the surface of the sea as expressed in statistical and spectral characteristics of the sea swell.

Korneva, L. A.↗

Mesospheric heating due to intense tropospheric convection

A series of rocket measurements made twice daily at Wallops Island, Va., revealed a rapid heating of the mesosphere on the order of 10 K on days when thunderstorms or squall lines were in the area. This heating is explained as the result of frictional dissipation of vertically propagating internal gravity waves generated by intense tropospheric convection. Ray-tracing theory is used to determine the spectrum of gravity wave groups that actually reach mesospheric heights. This knowledge is used in an equation describing the spectral energy density of a penetrative convective element to calculate the fraction of the total energy initially available to excite those waves that do reach the level of heating. This value, converted into a vertical velocity, is used as the lower boundary condition for a multilayer model used to determine the detailed structure of the vertically propagating waves. The amount of frictional dissipation produced by the waves is calculated from the solutions of the frictionless model by use of a vertically varying eddy viscosity coefficient. The heating produced by the dissipation is then calculated from the thermodynamic equation.

Taylor, L. L.↗

A multiband radiometer and data acquisition system for remote sensing field research

Specifications are described for a recently developed prototype multispectral data acquisition system which consists of multiband radiometer with 8 bands between 0.4 and 12.5 micrometers and a data recording module to record data from the radometer and ancillary sources. The systems is adaptable to helicopter, truck, or tripod platforms, as well as hand-held operation. The general characteristics are: (1) comparatively inexpensive to acquire, maintain and operate; (2) simple to operate and calibrate; (3) complete with data hardware and software; and (4) well documented for use by researchers. The instrument system is to be commercially available and can be utilized by many researchers to obtain large numbers of accurate, calibrated spectral measurements. It can be a key element in improving and advancing the capability for field research in remote sensing.

Bauer, M. E.↗