Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Localization in the SCAN meta-generalized gradient approximation functional leading to broken symmetry ground states for graphene and benzene

Density functional theory calculations play a central role in understanding chemical and solid-state systems. Progress depends on density functionals that accurately reproduce both energies, for thermochemistry, and properly describe ground states and other properties that are of interest. The Cr dimer, benzene and graphene are especially important benchmark systems for quantum chemistry and condensed matter physics. The Strongly Constrained and Appropriately Normed (SCAN) functional, which is an advanced meta-generalized gradient approximation functional that significantly improves molecular energies is shown to perform poorly for the Cr dimer. This is connected with its poor performance for itinerant solid-state magnets and is a consequence of over localization of electrons, thus illustrating an analogy between the Cr dimer and itinerant magnets. The Cr dimer is a notoriously difficult system for density functionals. However, we additionally find that SCAN predicts an incorrect symmetry broken ground state for 2D graphene and for the benzene molecule, which is surprising considering that ground states of these are known to be well described even by the simplest local density approximation. We show that SCAN overly favors localized spin polarized states, which is a serious deficiency of this approach. Thus, the challenge of finding density functionals that accurately treat both localized and delocalized electronic systems remains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface diagnostics platform for thin-film solid-state batteries

Understanding the impedances of battery materials and their interfaces remains a major challenge, usually addressed by electrochemical impedance spectroscopy (EIS) where frequency-dependent complex impedance of full battery cells is measured and then modeled by a network of connected electrical elements. As conventionally applied, this approach produces ambiguity in that (1) multiple different network configurations may fit the data convincingly and (2) the method offers no direct association of the electrical elements with physical features of the battery. Here we present a new methodology that resolves both sources of ambiguity, enabled by expanding the experimental scope to directly inform the configuration of elements and their parameters in the network model. We demonstrate this methodology using thin film fabrication of solid state battery devices patterned by shadow masked sputter deposition, so that diagnostic devices corresponding to individual interface and material components can be fabricated simultaneously with full cell batteries. EIS models for the diagnostic devices can then be connected to form full cell networks whose topology matches the well-known physical configuration of the battery. When connected in this way, the full network model – made from connecting the diagnostic device EIS models – fits the full cell EIS data. For the case of a thin film solid state battery composed of amorphous silicon anode, lithium phosphorus oxynitride (LiPON) solid electrolyte, and lithium vanadium oxide (Li x V 2 O 5 ) cathode, we show that the approach allows us to identify ionic impedance/conductivity of the cathode/electrolyte as a limiting impedance and the anode/electrolyte interface cycling instability as a primary degradation factor.

25 ENERGY STORAGE↗

Terahertz plasmonic Bessel beamformer

We experimentally demonstrate terahertz Bessel beamforming based on the concept of plasmonics. The proposed planar structure is made of concentric metallic grooves with a subwavelength spacing that couple to a point source to create tightly confined surface waves or spoof surface plasmon polaritons. Concentric scatterers periodically incorporated at a wavelength scale allow for launching the surface waves into free space to define a Bessel beam. The Bessel beam defined at 0.29 THz has been characterized through terahertz time-domain spectroscopy. This approach is capable of generating Bessel beams with planar structures as opposed to bulky axicon lenses and can be readily integrated with solid-state terahertz sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A stochastic reorganizational bath model for electronic energy transfer

Environmentally induced fluctuations of the optical gap play a crucial role in electronic energy transfer dynamics. One of the simplest approaches to incorporate such fluctuations in energy transfer dynamics is the well known Haken-Strobl-Reineker (HSR) model, in which the energy-gap fluctuation is approximated as white noise. Recently, several groups have employed molecular dynamics simulations and excited-state calculations in conjunction to account for excitation energies’ thermal fluctuations. On the other hand, since the original work of HSR, many groups have employed stochastic models to simulate the same transfer dynamics. Here, we discuss a rigorous connection between the stochastic and the atomistic bath models. If the phonon bath is treated classically, time evolution of the exciton-phonon system can be described by Ehrenfest dynamics. To establish the relationship between the stochastic and atomistic bath models, we employ a projection operator technique to derive the generalized Langevin equations for the energy-gap fluctuations. The stochastic bath model can be obtained as an approximation of the atomistic Ehrenfest equations via the generalized Langevin approach. Based on this connection, we propose a novel scheme to take account of reorganization effects within the framework of stochastic models. The proposed scheme provides a better description of the population dynamics especially in the regime of strong exciton-phonon coupling. Finally, we discuss the effect of the bath reorganization in the absorption and fluorescence spectra of ideal J-aggregates in terms of the Stokes shifts. We find a simple expression that relates the reorganization contribution to the Stokes shifts – the reorganization shift – to the ideal or non-ideal exciton delocalization in a J-aggregate. The reorganization shift can be described by three parameters: the monomer reorganization energy, the relaxation time of the optical gap, and the exciton delocalization length. This simple relationship allows one to understand the physical origin of the Stokes shifts in molecular aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconductivity and normal-state transport in compressively strained La 2 PrNi 2 O 7 thin films

The discovery of superconductivity under high pressure in Ruddlesden-Popper phases of bulk nickelates has sparked great interest in stabilizing ambient pressure superconductivity in thin-film form using epitaxial strain. Recently, signs of superconductivity have been observed in compressively strained bilayer nickelate thin films with an onset temperature exceeding 40 K, albeit with broad and two-step-like transitions. Here, in this study, we report intrinsic superconductivity and normal-state transport properties in compressively strained La 2 PrNi 2 O 7 thin films, achieved through a combination of isovalent Pr substitution, growth optimization, and precision ozone annealing. The superconducting onset occurs above 48 K, with zero resistance reached above 30 K, and the critical current density at 1.4 K is 100-fold larger than previous reports. The normal-state resistivity exhibits quadratic temperature dependence indicative of Fermi liquid behaviour, and other phenomenological similarities to transport in overdoped cuprates suggest parallels in their emergent properties.

Liu, Yidi [SLAC National Accelerator Laboratory (S↗

First-Principles Predictions of Out-of-Plane Group IV and V Dimers as High-Symmetry, High-Spin Defects in Hexagonal Boron Nitride

Hexagonal boron nitride (h-BN) has been recently found to host a variety of quantum point defects, which are promising candidates as single-photon sources for solid-state quantum nanophotonic applications. Most recently, optically addressable spin qubits in h-BN have been the focus of intensive research due to their unique potential in quantum computation, communication, and sensing. However, the number of high-symmetry, high-spin defects that are desirable for developing spin qubits in h-BN is highly limited. Here, we combine density functional theory (DFT) and quantum embedding theories to show that out-of-plane X N Y i dimer defects (X, Y = C, N, P, and Si) form a new class of stable C 3v spin-triplet defects in h-BN. We find that the dimer defects have a robust 3 A 2 ground state and 3 E excited state, both of which are isolated from the h-BN bulk states. We show that 1 E and 1 A shelving states exist and they are positioned between the 3 E and 3 A 2 states for all the dimer defects considered in this study. To support future experimental identification of the X N Y i dimer defects, we provide extensive characterization of the defects in terms of their spin and optical properties. We predict that the zero-phonon line of the spin-triplet X N Y i defects lies in the visible range (800 nm to 500 nm). We compute the zero-field splitting of the dimers’ spin to range from 1.79 GHz (Si N P i o ) to 29.5 GHz (C N N i o ). Furthermore, our results broaden the scope of high-spin defect candidates that would be useful for the development of spin-based solid-state quantum technologies in two-dimensional hexagonal boron nitride.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Use of Frit‐Disc Crucible Sets to Make Solution Growth More Quantitative and Versatile

The recent availability of step‐edge, frit‐disc crucible sets (generally sold as Canfield Crucible Sets or CCS) has led to multiple innovations associated with the group's use of solution growth. The use of CCS allows for the clean separation of liquid from solid phases during the growth process. This clean separation enables the reuse of the decanted liquid, either allowing for simple, economic, savings associated with recycling expensive precursor elements or allowing for the fractionation of a growth into multiple, small steps, revealing the progression of multiple solidifications. Clean separation of liquid from solid phases also allows for the determination of the liquidus line (or surface) and the creation, or correction, of composition–temperature phase diagrams. The reuse of clean decanted liquid has also allowed to prepare liquids ideally suited for the growth of large single crystals of specific phases by tuning the composition of the melt to the optimal composition for growth of the desired phase, often with reduced nucleation sites. Finally, it is discussed how solution growth and CCS use can be harnessed to provide a plethora of composition–temperature data points defining liquidus lines or surfaces with differing degrees of precision to either test or anchor artificial intelligence and/or machine‐learning‐based attempts to augment and extend the limited experimentally determined database.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detecting Reactive Products in Carbon Capture Polymers with Chemical Shift Anisotropy and Machine Learning

Aminopolymers are attractive sorbents for CO 2 direct air capture applications due to their high density of amine groups, which can readily react with atmospheric levels of CO 2 to form chemisorbed species. The identity of these chemisorbed species and the functional groups that form upon oxidative degradation depends on both material properties and processing conditions, forming a variety of carbonyl-type sites such as ammonium carbamates, bicarbonates, carbonates, carbamic acids, ureas, and amides. 13 C solid-state nuclear magnetic resonance (NMR) is often used to help elucidate the identity of these reacted species, but it is challenging due to the narrow chemical shift range of carbonyl sites. Herein, we demonstrate the application of a two-dimensional (2D) chemical shift anisotropy (CSA) recoupling pulse sequence (ROCSA) to obtain CSA tensor values at each isotropic chemical shift, overcoming limitations of isotropic peak resolution. CSA tensor values describe the local chemical environment and can readily differentiate between the chemisorbed and degradation products. To aid identification, we also developed a k-nearest neighbor (kNN) classification model to distinguish the functional groups via their CSA tensor parameters. This methodology was demonstrated on poly(ethylenimine) in γ-Al 2 O 3 exposed to CO 2 and showed that the chemisorbed products are ammonium carbamate and a mixed carbamate–carbamic acid species. The sample was analyzed again after desorption at 100 °C inducing mild degradation, and the remaining products were strongly bound carbamate and urea species. In conclusion, the combination of 2D CSA measurements coupled with a kNN classification model enhances the ability to accurately identify chemisorbed or degradation products in complex carbon capture materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protic Salt Polymer Membranes: High-Temperature Water-Free Proton-Conducting Membranes

This research on proton-containing (protic) salts directly addresses proton conduction at high and low temperatures. This research is unique, because no water is used for proton ionization nor conduction, so the properties of water do not limit proton fuel cells. A protic salt is all that is needed to give rise to ionized proton and to support proton mobility. A protic salt forms when proton transfers from an acid to a base. Protic salts were found to have proton conductivities that are as high as or higher than the best aqueous electrolytes at ambient pressures and comparable temperatures without or with water present. Proton conductivity of the protic salts occurs providing two conditions exist: i) the energy difference is about 0.8 eV between the protic-salt state versus the state in which the acid and base are separated and 2) the chemical constituents rotate freely. The physical state of these proton-conducting salts can be liquid, plastic crystal as well as solid organic and inorganic polymer membranes and their mixtures. Many acids and bases can be used to make a protic salt which allows tailoring of proton conductivity, as well as other properties that affect their use as electrolytes in fuel cells, such as, stability, adsorption on catalysts, environmental impact, etc. During this project, highly proton conducting (~ 0.1S/cm) protic salts were made that are stable under fuel-cell operating conditions and that gave highly efficient fuel cells. The high efficiency is attributed to an improved oxygen electroreduction process on Pt which was found to be virtually reversible in a number of liquid protic salts with low water activity (< 1% water). Solid flexible non-porous composite membranes, made from inorganic polymer (e.g., 10%indium 90%tin pyrophosphate, ITP) and organic polymer (e.g., polyvinyl pyridinium phosphate, PVPP), were found that give conductivity and fuel cell performances similar to phosphoric acid electrolyte with no need for hydration at ambient pressures. Synthesis and processing of these protic salts into proton-conducting membrane is far from optimized. This protic salt approach has great promise for more improvements in proton conducting membranes for making practical compact, lightweight and inexpensive fuel cells with uses ranging from small electronics (Power = 1 to 100 Watts) to transportation (kiloWatts) to stationary applications (>100 kiloWatts). This work clearly showed that proton can be conducted without water using protoic ionic liquids which are Bronsted salts which contain a proton and whose acid and base moieties have pK separated by more than 4 units and less than 14. A key finding is that the base used should be significantly different than the basicity of water or else water displaces the base and an ordinary acid membrane is left behind. This is the case where the acid moiety is sulfonic acid found on perfluorinated polymeric membranes. This PI suggests that a fruitful route for attaining highly proton-conductive stable protic salt membranes is to use the STABLE poly-phosphazene (-P=N-) polymer backbone with electrochemically STABLE pendant acid or base units on the phosphorous of poly-phosphazene and with suitable pK so the base is NOT the same pK as water. From this work this should give stable water-free proton conductors which should allow for stable fuel cells with Pt catalysts and possible with non-platinum catalyst for the hydrogen anode and oxygen cathode.

02 PETROLEUM↗

Enriched Boron-Doped Amorphous Selenium Based Position-Sensitive Solid-State Thermal Neutron Detector for MPACT Applications

High-efficiency thermal neutron detectors with compact size, low power-rating and high spatial, temporal and energy resolution are essential to execute non-proliferation and safeguard protocols. The demands of such detector are not fully covered by the current detection system such as gas proportional counters or scintillator-photomultiplier tube combinations, which are limited by their detection efficiency, stability of response, speed of operation, and physical size. Furthermore, world-wide shortage of 3 He gas, required for widely used gas detection method, has further prompted to design an alternative system. Therefore, a solid-state neutron detection system without the requirement of 3 He will be very desirable. To address the above technology gap, we had proposed to develop new room temperature solidstate thermal neutron detectors based on enriched boron ( 10 B) and enriched lithium ( 6 Li) doped amorphous Se (As- 0.52%, Cl 5 ppm) semiconductor for MPACT applications. The proposed alloy materials have been identified for its many favorable characteristics - a wide bandgap (~2.2 eV at 300 K) for room temperature operation, high glass transition temperature (t g ~ 85°C), a high thermal neutron cross-section (for boron ~ 3840 barns, for lithium ~ 940 barns, 1 barn = 10 -24 cm 2 ), low effective atomic number of Se for small gamma ray sensitivity, and high radiation tolerance due to its amorphous structure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spin-Forbidden Excitations in the Magneto-optical Spectra of CrI 3 Tuned by Covalency

Spin-forbidden (Δ⁢𝑆 ≠0) multiplet excitations and their coupling to magnetic properties are of increasing importance for magneto-optical studies of correlated materials. Nonetheless, the mechanisms for optically brightening these transitions and their generality remain poorly understood. Here, we report magnetic circular dichroism (MCD) spectroscopy on the van der Waals ferromagnet (FM) CrI 3 . Previously unreported spin-forbidden (Δ⁢𝑆 =1) 4 𝐴 2⁢g → 2 𝐸 g / 2 𝑇 1⁢g Cr 3+ 𝑑⁢𝑑 excitations are observed near the ligand-to-metal charge-transfer excitation threshold. The assignment of these excitations and their Cr 3+ multiplet character is established through complementary Cr 𝐿 3 -edge resonant inelastic x-ray scattering measurements along with charge-transfer multiplet calculations and chemical trends in the chromium trihalide series (Cr⁢𝑋 3 , 𝑋 = Cl, Br, I). We utilize the high sensitivity of MCD spectroscopy to study the thickness-dependent optical response. The spin-forbidden excitations remain robust down to the monolayer limit, and we observe a significant magnetic-field dependence of the MCD spectrum across the antiferromagnetic-to-FM transition in few-layer samples. We preliminarily attribute this behavior to changes in the metal-ligand covalency with magnetic state. Our results clarify the magneto-optical response of CrI 3 and identify covalency as a central mechanism for the brightening and field tunability of spin-forbidden multiplet excitations.

36 MATERIALS SCIENCE↗

Discovery of structure–property relations for molecules via hypothesis-driven active learning over the chemical space

The discovery of the molecular candidates for application in drug targets, biomolecular systems, catalysts, photovoltaics, organic electronics, and batteries necessitates the development of machine learning algorithms capable of rapid exploration of chemical spaces targeting the desired functionalities. Here, we introduce a novel approach for active learning over the chemical spaces based on hypothesis learning. We construct the hypotheses on the possible relationships between structures and functionalities of interest based on a small subset of data followed by introducing them as (probabilistic) mean functions for the Gaussian process. This approach combines the elements from the symbolic regression methods, such as SISSO and active learning, into a single framework. The primary focus of constructing this framework is to approximate physical laws in an active learning regime toward a more robust predictive performance, as traditional evaluation on hold-out sets in machine learning does not account for out-of-distribution effects which may lead to a complete failure on unseen chemical space. Here, we demonstrate it for the QM9 dataset, but it can be applied more broadly to datasets from both domains of molecular and solid-state materials sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligand-Sensitized Lanthanide Nanocrystals: Merging Solid-State Photophysics and Molecular Solution Chemistry

To date, the breadth of scientific research that has been devoted to investigating the photochemical and photophysical behavior of the lanthanide elements has generally fallen into one of two camps: solution studies of luminescent lanthanide metal-ligand complexes or investigations of solid-state nanoparticles, composed primarily of, or doped with, lanthan ide lumiphores. In the latter case, most research of lanthanide nanocolloids has precluded any investigations regarding the use of organic ligands to overcome the difficulties associated with f-f excitation of lanthanides. Instead, most work on condensed-phase lanthanide luminescence has centered on strategies such as d-f charge separation in divalent lanthanides and the sensitization of lanthanide excited states using quantum dots. Current work now aims at bridging the camps of condensed-phase lanthanide photophysics and the solution chemistry of ligand-lanthanide molecular complexes. Some recent efforts have partly focused on the fundamental characterization of NaGd 1-x Ln x F 4 nanoparticles featuring surface display of the sensitizer ligand 3,4,3-LI(1,2-HOPO), showing these structures to be capable of converting absorbed UV light into luminescence from Eu 3+ and Tb 3+ ions. Our results suggest such a use of the ligand sensitization as a tool of choice to overcome the constraints of UV solar spectrum/semiconductor band-gap mismatch and low absorption cross sections in solid-state lanthanide systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

I-V characteristics of in-plane and out-of-plane strained edge-hydrogenated armchair graphene nanoribbons

The effects of tensile strain on the current-voltage (I-V) characteristics of hydrogenated-edge armchair graphene nanoribbons are investigated by using DFT theory. The strain is introduced in two different ways related to the two types of systems studied in this work: in-plane strained systems (A) and out-of-plane strained systems due to bending (B). These two kinds of strain lead to make a distinction among three cases: in-plane strained systems with strained electrodes (A1) and with unstrained electrodes (A2), and out-of-plane homogeneously strained systems with unstrained, fixed electrodes (B). The systematic simulations to calculate the electronic transmission between two electrodes were focused on systems of 8 and 11 dimers in width. The results show that the differences between cases A2 and B are negligible, even though the strain mechanisms are different: in the plane case, the strain is uniaxial along its length; while in the bent case, the strain is caused by the arc deformation. Based on the study, a new type of nanoelectromechanical system solid state switching device is proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Frequency characteristics of an inherently stable Nd:YAG laser operated at liquid helium temperature

We report on frequency measurements of a free-running Nd:YAG laser operating at temperatures down to 6.5 K using a femtosecond laser frequency comb. Due to lower thermal expansion and thermo-optic effects as well as reduced electron-phonon interactions in Nd:YAG at cryogenic temperatures, a laser frequency stability on the order of 10{sup -11} at {tau} < or = 30s has been achieved. Within a one-week measurement period, absolute frequency deviations were lower than 1.85 MHz. This is up to a 100-fold improvement of frequency stability compared to any existing free-running solid-state laser.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical parametric oscillator: status of tunable radiation in mid-IR to IR spectral range based on ZnGeP{sub 2} crystal pumped by solid state lasers

In this review fundamentals of optical parametric oscillator and different phase matching situation have been discussed. Requirement of nonlinear crystal and properties of some mid-IR and IR transmitting crystal have been discussed. Present status of generation of tunable radiation in mid-IR to IR spectral range by OPO based on ZnGeP{sub 2} crystal and other techniques and its applications has been discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗