Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Shock wave properties of anorthosite and gabbro

Huyoniot data on San Gabriel anorthosite and San Marcos gabbro to 11 GPA are presented. Release paths in the stress-density plane and sound velocities are reported as determined from partial velocity data. Electrical interference effects precluded the determination of accurate release paths for the gabbro. Because of the loss of shear strength in the shocked state, the plastic behavior exhibited by anorthosite indicates that calculations of energy partitioning due to impact onto planetary surfaces based on elastic-plastic models may underestimate the amount of internal energy deposited in the impacted surface material.

Boslough, M. B.↗
NASA NTRS1991

Computational methods for shock waves in three-dimensional supersonic flow

A central artificial-viscosity and an upwind-biased difference method are contrived to solve the Euler equations for flowfields over typical spacecrafts. The spatial discretization is based on either nodal or cell-vertex formulation in the domain extending from free stream to the end of the vehicle. The outer boundary is treated as a bow shock in the first method but is placed in the free stream in the second, which captures both bow and internal shocks using an approximate Riemann solver based on high-order extrapolation to the cell face. These methods were tested for the Shuttle and Hermes orbiters at wind-tunnel conditions and angles of attack ranging from 0 to 60 deg. The artificial-viscosity method incorporated with a shock-fitting procedure shows smeared crossflow and wing-shock positions and required 15 percent more CPU per node than the upwind method. Greater flexibility and robustness is demonstrated by the latter on a fixed grid for all cases considered.

Li, Chien-Peng↗
NASA NTRS1989

Compressibility and shock wave interaction effects on free shear layers

Two compressible free shear layers with convective Mach numbers of .51 and .86 were studied as baseline configurations to investigate the effects of compressibility on the turbulence characteristics. These shear layers were then disturbed by the placement of an obstruction in the shear layer in an attempt to enhance the shear layer growth rate. These models produced a curved shock in the supersonic side of the shear layer. The results indicate a significant reduction in turbulence levels with increased compressibility. However, there are not any significant changes due to the bow shock interaction with the shear layer.

Samimy, M.↗
NASA NTRS1993

Shock-wave propagation in a sonoluminescing gas bubble

The motion of the bubble radius and of the air trapped inside the bubble during sonoluminescence are determined self-consistently by coupling the solution of the Rayleigh-Plesset equation governing the bubble radius to the solution of Euler's equations for the motion of air in the bubble. Results are presented for three slightly different conditions of excitation, in two of which shocks are formed during the collapse of the bubble, and in which such high temperatures are attained that the air is ionized. Estimates are made of the duration and intensity of the light then radiated by the plasma.

Wu, C. C.↗
NASA NTRS1983

Turbulence measurements in two shock-wave/shear-layer interactions

Measurements of the longitudinal component of the mass-flow fluctuations have been made in an 8-deg compression corner flow and a reattaching shear layer at a Mach number of approximately 2.9 and unit Reynolds number of about 7 x 10 to the 7th per m. The data include turbulence intensities and probability density distributions. Significant turbulence amplification occurs in both interactions. A qualitative explanation in terms of direct shock effects, extra strain rates, and their relative contribution, is suggested.

Hayakawa, K.↗
NASA NTRS1976

A normal shock-wave turbulent boundary-layer interaction at transonic speeds

Experimental results, including surveys of the mean and fluctuating flow, and measurements of surface pressure, skin friction, and separation length, are compared with solutions to the Navier-Stokes equations utilizing various algebraic eddy viscosity models to describe the Reynolds shear stresses. The experimental data, obtained at a free-stream Mach number of 1.5 and Reynolds numbers between 10 million and 80 million, show that a separated zone forms near the foot of the shock and that its length is proportional to the initial boundary-layer thickness; that a supersonic region forms downstream of the shock; and that the shear stress increases significantly through the interaction and subsequently decays downstream. The computations adequately represent the qualitative features of the flow field throughout the interaction but quantitatively underpredict the extent of separation and the downstream level of skin friction.

Mateer, G. G.↗
NASA NTRS1976

Equations of state and impact-induced shock-wave attenuation on the moon

Current equation of state formulations, used for finite difference cratering flow calculations, are cast into a framework permitting comparison of peak pressures attained upon impact of a sphere, with a half-space, along the impact symmetry axis, to one dimensional impedance match solutions. On the basis of this formulation and application of thermochemical data, the regimes of melting and vaporization are examined. For the purpose of identifying material which will, upon isentropic release from the impact-induced shock state, result in a solid just brought to its melting point, i.e., incipiently melted (IM); completely melted (CM); just brought to its boiling point, i.e., incipiently vaporized (IV); and completely vaporized (CV) state, the pressures at which the critical isentropes intersect the Hugoniots of iron and gabbroic anorthosite (GA) are examined in detail. The latter rock type is assumed to be representative of the lunar highlands. The Hugoniot pressures, for which IM, CM, IV, and CV will occur upon isentropic expansion, are calculated to be 2.2, 2.6, 4.2, and 16.8 Mbar, respectively.

Ahrens, T. J.↗
NASA NTRS1977

Equations of state and impact-induced shock-wave attenuation on the moon

Equation of state formulations are considered in a framework that permits comparison with one-dimensional impedance match solutions. The problem considered is the peak pressures attained along the impact symmetry axis when a sphere impacts with a half-space. The regimes of melting and vaporization - in particular, incipiently melted, completely melted, incipiently vaporized, and completely vaporized states - are examined, and the pressures at which critical isentropes intersect the Hugoniots of iron and gabbroic anorthosite are considered. A means of representing the spatial attenuation of shock pressure along the impact axis by two regimes is introduced, and results for the near-field and far-field regime are presented. It is thought that the treatment can be used to obtain quantitative bounds on the impact velocity of the meteorite.

Ahrens, T. J.↗
NASA NTRS1990

Upstream-influence scaling of fin-generated shock wave boundary-layer interactions

An upstream-influence scaling law, previously formulated through analysis of Mach 3 data, has been extended to Mach numbers from 2.5 through 4. For adiabatic, equilibrium, turbulent boundary layers, there is no Mach number effect on the constants in the Reynolds number parameters of this law. In addition, based on local similarity, a new Mach number parameter, namely, the Mach number component of the incoming stream normal to the farfield upstream influence, is proposed. Scaling by either the incoming Mach number normal to the inviscid shock or by the incoming Mach number normal to the farfield upstream influence is equivalent to scaling by the hypersonic similarity parameter.

Lu, Frank K.↗
NASA NTRS2000

Shock Wave and EUV Transient During a Flare

A metric type II burst and a 'brow' type enhancement in EUV were observed during the hard X-ray flare of 1997 April 15 from a newly emerging region, AR 8032. The position of the type II burst obtained from the Nancay radioheliograph coincided with the EUV transient. The type II burst and the EUV transient were in the equatorial streamer region to the north of the flaring region. This observation suggests that the EUV transient may be the manifestation of the MHD shock responsible for the type II burst.

Gopalswamy, N.↗
NASA NTRS1985

the role of shock waves in modulation of galactic cosmic rays

The understanding of modulation of the galactic cosmic rays has considerably progressed by the exploration by space probes of major heliospheric structures, such as the Corotating Interaction Regions, the neutral sheet, and the compression regions of intense heliospheric magnetic fields. Also relevant in this context were the detections in the outer heliosphere of long lasting Forbush type decreases of cosmic ray intensity. The results of recent theoretical studies on the changes in intensity and energy, at different location from the Sun, induced by the passage of shocks across the heliosphere are presented. In this version of the research, the simplest cases of modulation of uGV and 2GV particles by single or several shocks during periods of positive and negative solar field polarity are reviewed. The results of the theoretical aspects of the search is reported. The comparison of the theoretical predictions with space probe data allows conclusions to be drawn on the role of shocks on the modulation on both the 11 and 22 year galactic cosmic ray cycles in the outer heliosphere and on the plausibility of the models and parameters used.

Gall, R.↗
NASA NTRS1987

The coronal mass ejection of July 6, 1980 - A candidate for interpretation as a coronal shock wave

The July 6, 1980 looplike coronal mass ejection observed with the Solar Maximum Mission coronagraph is described and analyzed. Two observations are given special consideration: (1) the sides of the loop moved laterally while they were visible and did not form stationary bright columns, or 'legs', in the late stage, and (2) raylike features initially outside the mass ejection loop were not pushed aside or bent until the laterally moving loop sides passed over them. These observations, as well as the results of quantitative analysis of the motion of the bright loop, are consistent with the identification of the bright loop as a shock front. The loop top moved outward faster (at about 1000 km/s) than most mass ejections studied previously, and possibly faster than the Alfven speed in the corona, while the loop sides moved laterally at a speed of about 800 km/s and showed no evidence of deceleration. The excess mass in the bright loop is estimated to be less than about 2 x 10 to the 14th g, well below the value found to be typical of coronal mass ejections.

Sime, D. G.↗
NASA NTRS1984

Type II bursts, shock waves, and coronal transients - The event of 1980 June 29, 0233 UT

The metric Type-II solar burst event of June 29, 1980, is characterized on the basis of spatially resolved radioheliograph observations obtained at Culgoora, Australia, and visible-light observations obtained with the coronograph/polarimeter of the SMM satellite. The data are presented in images, diagrams, and graphs and discussed in detail. The Type-II emission is found to arise in the dense moving material behind the transient loops, which have sky-plane width 0.5 solar radius and line-of-sight depth 0.1-0.4 solar radius. A faint arc observed moving ahead of the transient loops at about 900 km/sec and not associated with the Type-II burst is attributed to a shock front, and the compression ratio and Alfven Mach number of the enhanced-density region are estimated as n2/n1 = 1.3-3 and M(A) = 1.2-3. The ambient material at 3 solar radii is determined to have Alfven speed 250-625 km/sec and magnetic-field strength 50-120 mG. The total mass of the event is calculated as 700 Tg; the total magnetic energy of the loops is (1.5-15) x 10 to the 29th ergs.

Gary, D. E.↗
NASA NTRS1971

Low-energy proton increases associated with interplanetary shock waves.

Impulsive increases in the low energy proton flux observed by the Explorer 34 satellite, in very close time association with geomagnetic storm sudden commencements are described. It is shown that these events are of short duration (20-30 min) and occur only during the decay phase of a solar cosmic-ray flare event. The differential energy spectrum and the angular distribution of the direction of arrival of the particles are discussed. Two similar increases observed far away from the earth by the Pioneer 7 and 8 deep-space probes are also presented. These impulsive increases are compared with Energetic Storm Particle events and their similarities and differences are discussed. A model is suggested to explain these increases, based on the sweeping and trapping of low energy cosmic rays of solar origin by the advancing shock front responsible for the sudden commencement detected on the earth.

Palmeira, R. A. R.↗
NASA NTRS1994

Collisional-Radiative Nonequilibrium and Precursor Effects in a Nitrogen Shock Wave

Improvements to a plasma code with a Collisional-Radiative (CR) non-equilibrium model are made, allowing for a more accurate description of the physical processes. The code allows for non-Boltzmann distributions of the electronic excited states by convecting separately each excited state, as a pseudo-specie. Each molecular state has also its own vibrational temperature, while a global rotational temperature is assumed. The free electron temperature is different from those of the excited states, and the electron heat conduction is also included. The CR model also uses a unique coupling between chemistry and vibrational energy (C-V coupling), which is fully coherent, and has the property of establishing thermal equilibrium as well as chemical equilibrium, on its own. We have also included a coupling between electronic excitations and vibrational energy (X-V coupling), which can have a strong influence on the vibrational temperature of some states. The recent improvements include the multi- temperature dependence of the chemical rates for associative ionization, as well as the estimation of the internal energies transferred during this process. Additionally, the distribution of energy into different translational modes (electron and heavy particles) is now correctly modeled. This provides a very rapid heating mechanism for the free electrons, since it is found that the electrons are generated with an average thermal energy of the same order as the heavy particle translational energy. This effect was observed by Gorelov et al in a recent paper, and lead to pronounced peaks in electron temperature immediately behind the shock. We will attempt ro reproduce this phenomenon. The last modification concerns the inclusion of the radiative terms into the calculations, thus enabling us to observe the effect of radiative losses and radiation transport. Preliminary tests have shown that the radiative losses are not negligible, i.e. the shock velocity drops when the radiative emission is included. In addition, we have observed some precursor excitation and ionization phenomena. These may be important at high shock velocities, and this will be investigated in detail. Precursor phenomena were also observed (in air) by Gorelov et al, and our results (for pure nitrogen) will be qualitatively compared with theirs.

Cambier, Jean-Luc↗