Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shift current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Krylov Subspace Methods for Complex Non-Hermitian Linear Systems

We consider Krylov subspace methods for the solution of large sparse linear systems Ax = b with complex non-Hermitian coefficient matrices. Such linear systems arise in important applications, such as inverse scattering, numerical solution of time-dependent Schrodinger equations, underwater acoustics, eddy current computations, numerical computations in quantum chromodynamics, and numerical conformal mapping. Typically, the resulting coefficient matrices A exhibit special structures, such as complex symmetry, or they are shifted Hermitian matrices. In this paper, we first describe a Krylov subspace approach with iterates defined by a quasi-minimal residual property, the QMR method, for solving general complex non-Hermitian linear systems. Then, we study special Krylov subspace methods designed for the two families of complex symmetric respectively shifted Hermitian linear systems. We also include some results concerning the obvious approach to general complex linear systems by solving equivalent real linear systems for the real and imaginary parts of x. Finally, numerical experiments for linear systems arising from the complex Helmholtz equation are reported.

Freund, Roland W.↗
NASA NTRS2015

The Transit-Time Distribution from the Northern Hemisphere Midlatitude Surface

The distribution of transit times from the Northern Hemisphere (NH) midlatitude surface is a fundamental property of tropospheric transport. Here we present an analysis of the transit time distribution (TTD) since air last contacted the northern midlatitude surface layer, as simulated by the NASA Global Modeling Initiative Chemistry Transport Model. We find that throughout the troposphere the TTD is characterized by long flat tails that reflect the recirculation of old air from the Southern Hemisphere and results in mean ages that are significantly larger than the modal age. Key aspects of the TTD -- its mode, mean and spectral width -- are interpreted in terms of tropospheric dynamics, including seasonal shifts in the location and strength of tropical convection and variations in quasi-isentropic transport out of the northern midlatitude surface layer. Our results indicate that current diagnostics of tropospheric transport are insufficient for comparing model transport and that the full distribution of transit times is a more appropriate constraint.

model transport↗
NASA NTRSDate not supplied

Mitigating Headward Fluid Shifts With Veno-Constrictive Thigh Cuffs During Spaceflight

Astronauts experience a chronic headward fluid shift in weightlessness as evidenced by increased cardiac output, decreased leg volume, a redistribution of venous fluid, and venous congestion in the upper body. Alterations in cerebrospinal fluid hydrodynamics and changes in cerebral venous pressure secondary to the headward fluid shift may contribute to ocular changes associated with spaceflight-associated neuro-ocular syndrome (SANS). Veno-constrictive thigh cuffs (VTC; Braslets) provided to Soyuz crewmembers alleviate symptoms of the headward fluid shift during the first week of spaceflight and have been documented to reduce internal jugular vein (IJV) distension during weightlessness. Application of VTCs designed collaboratively by NASA Johnson Space Center Cardiovascular and Vision Laboratory (CVL) and Clemson Textile Laboratory at Clemson University to improve fit and comfort was documented to mitigate changes in choroid thickness, intraocular pressure, and IJV area during posture-induced headward fluid shifts. VTC are demonstrated to reduce headward fluid shifts in both ground-based and spaceflight studies, and thus, may be a countermeasure against development of SANS. In addition, VTC are a simple mechanical countermeasure currently at a high technical readiness level (TRL) and are compact and lightweight, making them compatible with the spaceflight operations environment

Connor R. Ferguson↗
DOE OSTI2023

In-situ I-V measurement of a module in a PV array

In one respect, disclosed is an in-situ current-voltage (I-V) measurement device for photovoltaic modules in a photovoltaic array, comprising a variable load, wherein the variable load is configured to be connected in parallel with a module, wherein the module is connected in series with at least one other module in a string, such that the module supplies current simultaneously to the string and to the variable load, and wherein the variable load is controlled by a controller, and wherein the controller is configured to shift an I-V operating point of the module, based at least upon varying the variable load.

Gostein, Michael↗
DOE OSTI2025

Data Centers and Digital Assurance Workshop 3 – Mitigations for Digital Assurance Risks

The third session of the TADA (Technical Assistance for Digital Assurance) Data Centers Cohort, held on November 18, 2025, focused on developing mitigation strategies for digital assurance risks identified in previous workshops. Hosted by Idaho National Laboratory (INL) and ScottMadden, the session emphasized the application of Cyber-Informed Engineering (CIE) to data center infrastructure, particularly at the utility–data center interface. Participants revisited and ranked key digital assurance risks, including architecture and interface weaknesses, governance gaps, and AI-enabled threats. The workshop introduced the 12 principles of CIE, advocating for consequence-focused design, engineered controls, and secure information architecture to proactively reduce cyber-physical vulnerabilities. These principles were applied to critical data center systems such as power distribution, UPS, cooling, SCADA/BMS, and grid-forming batteries. The session also addressed governance challenges at the interconnection boundary, highlighting the need for clear roles in telemetry sharing, firmware management, and trip settings. Special attention was given to emerging risks from behind-the-meter (BTM) generation, including reverse-power flow and the integration of small modular reactors (SMRs), which shift data centers from large loads to complex generation nodes. Participants explored how interconnection agreements can serve as enforceable instruments for digital assurance, and reviewed gaps in current standards such as NERC CIP, IEC 62443, and IEEE 1547. The workshop concluded with pathways to standardization, including model agreement language, state-level programs, and expanded NERC guidance. INL also presented tools and frameworks for secure procurement and supplier risk management, reinforcing the need for integrated engineering and policy solutions to secure the evolving data center–grid ecosystem. Session 3 of 3.

24 - POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Measurement of small island characteristics using high resolution ECE and CER at DIII-D

Abstract The measurements using the high resolution electron cyclotron emission radiometry and the charge exchange and recombination spectroscopy are processed using analytic formulas to allow for the detection of islands as small as 1.9 cm. In contrast to large, saturated magnetic islands which are relatively well understood to be governed by the loss of bootstrap current inside the island, small islands are less well understood due to the difficulty of their accurate measurement in tokamaks. Here, ‘small’ islands are islands comparable in size to the ion banana width, which can be as small as 0.8 cm at DIII-D. The new measurement methods allow for the detection of small island widths when the predicted increase of mode frequency to match the Doppler shifted ion diamagnetic frequency is observed. Therefore, for the first time, the mode frequency increase can be unambiguously associated to the acceleration of the magnetic island propagation. Such association allows for a further development and validation of the much-debated theory of ion polarization currents, which is thought to govern the small island growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Enhancing Data Quality Monitoring at CMS with Interactive Visualization Tools and Automated Reference Run Selection

Current data quality monitoring (DQM) tools at CMS offer granularity limited to per-run analysis. Consequently, issues manifesting at the per-lumisection level can go unnoticed or, even if detectable, often lead to the classification of the whole run as bad, resulting in unnecessary data loss. Additionally, shifters have to evaluate a large set of monitoring elements during their long shifts, increasing the probability of human errors or overlooked problems. In this contribution, we present ongoing work on the development of tools that will provide shifters with an accessible, granularity-enhanced view of DQM data through interactive and dynamic visualizations. Furthermore, we introduce a reference run selection tool currently under development, which will automate the selection based on data-taking conditions and will offer a curated set of training data for machine learning models that will be used for the partial automation of the offline data certification process. These endeavors will be integrated into the DIALS website, enabling enhancements in data certification accuracy and improving the accessibility of DQM at CMS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Neutron-star mergers and new opportunities in rare isotope experimental research

The recent observation of the first neutron-star merger event GW170817 had major impact on our understanding of stellar nucleosynthesis. It was identified for the first time as one of the sites for the astrophysical r process, a process that is responsible for the synthesis of roughly half of the isotopes of the heavy elements. The observed kilonova afterglow from the neutronstar merger event was interpreted as the result of the radioactive decays of r-process isotopes as they decay back to the valley of stability. The observed kilonova light curve is however broad due to its complex composition and the Doppler-shift due to fast moving matter, and is therefore impossible to interpret without accurate knowledge of the nuclear properties of the nuclei involved. This work focuses on the current experimental efforts to measure the relevant nuclear properties, together with plans for the next generation radioactive beam facilities, and in particular the Facility for Rare Isotope Beams (FRIB).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

The statistical defensibility of forensic proteomics

The U.S. Federal court system maintains very high standards for admissibility of scientific evidence. In particular, to allow such evidence into court, a judge must be satisfied it is both reliable, in other words, based on a robust, reproducible, and accurate method, and relevant, meaning it adds weight to the prosecution or defense claims in a case. In 1993, the U.S. Supreme Court issued landmark guidelines for judges considering whether or not to admit scientific testimony. The resulting Daubert criteria changed the forensic sciences in a profound way, leading investigators, researchers, and legal experts to question the scientific validity of established forensic methods that had been widely accepted for years. The Daubert criteria also caused a paradigm shift in the development of new forensic methods, forcing researchers to better prepare new techniques for use in an increasingly adversarial environment. In this chapter, we discuss the current state of forensic proteomics in the context of modern forensics. We present the Daubert criteria, discuss seven elements of a defensible method, and provide guidelines for building statistical defensibility of this emerging discipline.

Jarman, Kristin H.↗
DOE OSTI2020

Wisconsin In Situ Penning (WISP) gauge: A versatile neutral pressure gauge to measure partial pressures in strong magnetic fields

A new type of in-vessel Penning gauge, the Wisconsin In Situ Penning (WISP) gauge, has been developed and successfully operated in the Wendelstein 7-X (W7-X) island divertor baffle and vacuum vessel. The capacity of the quantitative measurements of the neutral reservoir for light impurities, in particular, helium, is important for tokamaks as well as stellarator divertors in order to avoid fuel dilution and radiative energy loss. Penning gauges assisted by spectroscopy are a powerful tool to obtain the total neutral pressure as well as fractional neutral pressures of specific impurities. The WISP gauge is a miniaturized Penning gauge arrangement, which exploits the ambient magnetic field of magnetic confinement fusion experiments to establish the Penning discharge. Then, in situ spectroscopy is conducted to separate the fractional neutral pressures of hydrogen, helium, and possibly also other impurities. The WISP probe head was qualified using the magnetic field of the Magnetized Dusty Plasma Experiment at Auburn University between 0.25 T and 3.5 T [E. Thomas et al ., J. Plasma Phys. 81, 345810206 (2015)]. The in-depth quantitative evaluation for hydrogen and helium will be shown as well as an exploration of nitrogen, argon, and neon. A power law scaling between current I and pressure p, I = f (Gas,V) p n⁽Gas, B⁾ , was shown. The factor f is gas and anode potential dependent, while n is gas and magnetic field strength dependent. Pressure measurements from 0.1 mbar and down to 1 × 10 -5 mbar were achieved, demonstrating a reliable operating range for relevant pressure levels in the divertor and main vessel regions in current and future fusion devices, with a time resolution of up to 1 kHz. The lowest achievable pressure measurement increases with an increase in B and can be shifted with the anode potential V . At W7-X, the WISP probe head was mounted on an immersion tube setup that passes through the cryostat and places the probe head close to the plasma. Two probe heads were positioned in different divertor pump gaps, top and bottom, and one close to the plasma on the midplane in one module. The gauges were in situ calibrated together with the ASDEX pressure gauges [G. Haas and H.-S. Bosch, Vacuum 51, 39 (1998)]. Data were taken during the entire operation phase 1.2b, and measurements were coherent with other neutral gas pressure gauges. For the spectroscopic partial pressure measurements, channels of a spectroscopic detection system based on photo-multipliers, a so-called filterscope [R. J. Colchin et al ., Rev. Sci. Instrum. 74, 2068 (2003)], provided by the Oak Ridge National Lab were used.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Performance of Hamamatsu VUV4 SiPMs for detecting liquid argon scintillation

Detection of light signals is crucial to a wide range of particle detectors. In particular, efficient detection of vacuum ultraviolet (VUV) light will provide new opportunities for some novel detectors currently being developed, but is technically challenging. In this paper, we characterized the performance of Hamamatsu VUV4 silicon photomultipliers (SiPMs) for detecting VUV argon scintillation light without wavelength shifting. Using a customized cryogenic amplifier design, we operated two models of VUV4 SiPMs inside liquid argon and thoroughly examined their direct sensitivities to liquid argon scintillation. In addition to describing their cryogenic performance, we measured a photon detection efficiency of 14.7 +1.1 -2.4 % and 17.2 +1.6 -3.0 % at 128 nm for these two VUV4 models for operation at 4 V of overvoltage, with the main uncertainty arising from the SiPM reflectivity for VUV light.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Thermally tunable mid-infrared nanocavity resonance of coupled surface plasmon-phonon polaritons

Phase-change materials (PCMs) are essential for achieving tunability of metasurfaces. However, they frequently face limitations in the long-wave infrared range because of their lossy behavior. Here, we experimentally demonstrate a thermally tunable mid-infrared nanocavity resonance from coupled surface plasmon-phonon polaritons that are supported within a trilayer structure of metal-PCM layer-polar dielectric (Au-VO 2 -SiC). The top metal structures configure the Fabry-Perot cavity resonance near 840 cm −1 (11.9 µm), which is sensitively tunable and reversible with small changes in the VO 2 refractive index ∆n near below its insulator-to-metal phase transition temperature where the loss is small. The maximum resonance shift of 7.7 cm −1 is induced by a small ∆n = 0.3 over a temperature change of 3°C. The tuning figure of merit is comparable to the current standard in photonic modulator applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Recommended Actions to Improve Adapter Safety

With the rapid advancement and acceleration in the electric vehicle (EV) industry within the United States, major automakers and EV charging companies are increasingly adopting the North American Charging Standard (NACS) connector style, now officially known as J3400. This shift is expected to enhance charging infrastructure, providing a better customer experience by making it easier for all EV drivers to access a wider network of direct-current (DC) fast chargers (DCFCs). However, the adoption of the J3400 standard presents challenges for many EVs already on the roads and some currently coming off production lines that are equipped with the Combined Charging System (CCS) connector, which this report will refer to as the North American standard, CCS1. These vehicles will need adapters to use new or existing J3400 infrastructure. During this transition, several issues have emerged. Firstly, there is a need to standardize the new connector type to ensure it is interoperable, safe, and reliable. Second, existing CCS EV drivers need a way to access the J3400 network, which will require electric vehicle supply equipment (EVSE) or sites with both connector types, driver-provided adapters to physically convert from CCS to J3400, or EVSE with retained adapters designed for use with the EVSE. Third, adapter standards will need to be written to specify how they will be designed and what evaluations will be needed to ensure safe and reliable performance. To address these challenges, adapters that support different types of charging connectors will be essential. These adapters will play a crucial role in supporting the transition and ensuring continued service for legacy EVs with CCS inlets as the J3400 standard becomes the predominant one in the United States. Consequently, the National Charging Experience (ChargeX) Consortium has investigated and performed a teardown analysis on the different adapter versions on the market. The aim is to create a failure mode and effects analysis (FMEA) on what are expected to be the most common adapter types used in this transition. In order to support this work, we executed an FMEA exercise with the main goal of identifying gaps in the existing adapters' performance and conformance to the most common safety requirements of high-power and high-voltage devices. This effort focused on adapters provided by the driver, as these may present the highest safety and reliability risks. The recommendations made here apply to both retained and driver-provided adapters.

25 ENERGY STORAGE↗
DOE OSTI2025

Construction Methodology Transformation for the Benefit of Workforce Development

Construction is a key economic engine driving both national and global economies. While manual, onsite construction methods dominate the U.S. construction industry, a major shift towards offsite methods has been underway due to its efficiency, speed, and potential cost savings. The workforce necessary for offsite construction growth does not exist in its current form because of the focus on onsite methodologies and the lack of exposure to offsite building methods at all levels of a student’s learning journey. The growth of the U.S. construction industry and competitiveness in an increasingly global construction market over the coming decades can only be supported by a dramatic increase in the use of offsite methods, which requires ramping up workforce training for certain skillsets. The goal of Construction Methodology Transformation for the Benefit of Workforce Development was to understand the opportunities and barriers in both education and industry and to identify best practices for offering curriculum and training to educators, industry, and students that would support skills needed for careers in offsite construction. Our team proposed combining three offsite construction workforce development needs: content development, exposure and training, and job placement - under a single Platform model that would increase experience and career opportunities for students and help match them with potential industry members. Through our proposed solution we expected to see: developed offsite curriculum being utilized by educators and students; an increase in the identification of construction technology and offsite construction methods; an average increase in knowledge gain of at least 25% after participation in pilots; better equipped candidates who are prepared for jobs in offsite construction; and a beta workforce development platform that helps build more pathways for students looking for careers in offsite construction. The two pilots included almost 250 students and resulted in an average knowledge gain of 37 percent. Our research has identified areas of opportunity, for both education and industry to make collaborative training programs more efficient and successful. The chosen techniques for this program are extremely effective when both the school and factory have solid processes and cultures in place to accept students into training programs. This project serves as an important stepping stone to industrywide collaboration to move workforce development for offsite construction forward across the country. With continued collaboration programs like this can provide much needed early exposure and training in offsite construction and we can begin to fill important positions for the future of construction.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Extending SST vanadis to Add SIMT Functional Units

Sandia National Laboratories is currently investigating scalable architectural simulation capabilities, with a focus on simulating and evaluating highly scalable supercomputers for high-performance computing applications. This exploration is driven by the shift toward more specialized forms of compute and the need for a more diverse set of accurate models. This project will explore the use of General-Purpose Graphical Processing Units (GPGPUs) in high-performance computing using both physical systems and new simulator models – traditional GPUs as well as tightly-coupled SIMT accelerators.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1974

Edge diffracted caustic fields

The fields near a caustic created by an edge diffraction process are computed using the equivalent current concept. These fields are shown to have the property commonly associated with ray optical analysis or the Geometrical Theory of Diffraction (GTD), e.g., a 90 deg phase shift as the ray passes through the caustic. The present effort is directed toward consideration of the caustic created by an edge diffraction process. Particular attention is focused on electromagnetic excitation. The acoustic excitation for the hard boundary condition is outlined in an appendix. In addition, goal is to establish the extent of the caustic region. This is of particular importance when a ray optical solution involves multiply-diffracted terms in that the minimum size of the body that can be analyzed may be restricted by the extent of the caustic, i.e., the 90 deg phase shift used in ray optical analysis may be introduced only if the caustic is contained on the surface being studied.

Burnside, W. D.↗
NASA NTRS2012

Pulsar Pair Cascades in Magnetic Fields with Offset Polar Caps

Neutron star magnetic fields may have polar caps (PC) that are offset from the dipole axis, through field-line sweepback near the light cylinder or non-symmetric currents within the star. The effects of such offsets on electron-positron pair cascades are investigated, using simple models of dipole magnetic fields with small distortions that shift the PCs by different amounts or directions. Using a Monte Carlo pair cascade simulation, we explore the changes in the pair spectrum, multiplicity and energy flux across the PC, as well as the trends in pair flux and pair energy flux with spin-down luminosity, L(sub sd). We also give an estimate of the distribution of heating flux from returning positrons on the PC for different offsets. We find that even modest offsets can produce significant increases in pair multiplicity, especially for pulsars that are near or beyond the pair death lines for centered PCs, primarily because of higher accelerating fields. Pair spectra cover several decades in energy, with the spectral range of millisecond pulsars (MSPs) two orders of magnitude higher than for normal pulsars, and PC offsets allow significant extension of all spectra to lower pair energies. We find that the total PC pair luminosity L(sub pair) is proportional to L(sub sd), with L(sub pair) approximates 10(exp -3) L(sub sd) for normal pulsars and L(sub pair) approximates 10(exp -2) L(sub sd) for MSPs. Remarkably, the total PC heating luminosity for even large offsets increases by less than a factor of two, even though the PC area increases by much larger factors, because most of the heating occurs near the magnetic axis.

Harding, Alice K.↗