Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “route type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

On-Orbit Cryogenic Refueling: Potential Mission Benefits, Associated Orbital Mechanics, and Fuel Transfer Thermodynamic Modeling Efforts

The placement of cryogenic fuel/propellant depot stations in Earth orbit has the potential to transform the nature and operations for many types of spaceflight missions. Today, spaceflight missions are almost universally required to carry the entire amount of fuel required for the mission, for the entire duration of the mission, from the point of launch. This is the rough equivalent of making a drive from Ohio to California, requiring the traveler to bring along the total sum of gasoline required for the entire trip, without being able to ‘fill-up’ anywhere along the route. Obviously, this framework of travel greatly encumbers the breadth, scope, and efficiency of potential journeys. Cryogenic fuel/propellant depots have not been implemented because many technical, operational, and engineering challenges still exist. These must be overcome prior to the placement of usable on-orbit propellant depots. This thesis investigates three specific engineering challenges related to on-orbit propellant depots, and presents the current state, technological challenges, and ultimate benefits of on-orbit cryogenic refueling.

No vent fill↗

Error Sources and Mitigation Strategies for Thermocouples Integrated in Flexible Thermal Protection System Materials

Brief Presenter Biography:Ruth Miller is an aer-ospace systems engineer in the Entry Systems and Ve-hicle Development Branch at NASA Ames Research Center.Introduction:The flexible thermal protection sys-tem (FTPS) on NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) vehicle will be in-strumented with thermocouples (TCs) to measure the in-depth thermal response during entry into Earth’s atmos-phere[1, 2]. Accurate flight temperature measurements are critical for verifying vehicle performance during the flight test and reducing uncertainties in the thermal models.However,the deployable nature of inflatable decelerator technology presents challengesfor integrat-ing TCs, specifically the TCsneed to be compactableand cannot damage the FTPSnor the inflatable structure(IS).Unlike traditional rigid aeroshells, routing TCsthrough the thickness of the FTPS could cause signifi-cant damage during packing of the deployable aeroshellbecause the different layers may shift small amounts in relation to each other imparting strain on the TCsand FTPS materials. The LOFTID TCleads are routed from the measurement location back to the data acquisition system in the vehicle centerbody within the same FTPS layer that they are monitoring the temperature. This ap-proach eliminates the need to put holes in the FTPS lay-ers,butas a consequence,the insulated TCleads travel for an appreciable distance through a region that will expose them to high temperaturesand large thermal gra-dients.LOFTID’s TCswere baselined to be commercially available Type K TCswith a binder impregnated glass braid insulation. These TCswere chosen because they had been used successfully on IRVE-3 and in ground-based arc jet testing. Additionally, these TCsdid notdamage the FTPS nor IS during packing and deploy-ment testing. However, the glass braid insulation is only rated to a maximum continuous use temperature of 482ºC. For reference, the duration of the heat pulse on the LOFTID vehicle is on the order of minutes and themaximum predicted temperaturebeneaththe outermost FTPS layersis 1350ºC.Ground-based testing in a tube furnace at NASA Ames Research Centerwas conducted to determine if the baseline TCsrouted through FTPS samples would survive and provide accurate temperature measure-mentsat LOFTID flight-relevant temperatures[3].The test results showed large measurement errors occurred beginning at approximately 400°C due to conductive deposits on the TCinsulation electrically shorting the TCleads.The conductive deposits and thus electrical shorting weredetermined to be caused by twoerror sources:1.The organic binder on the TCinsulation carbon-izingin a high temperature, low oxygen envi-ronment2.Decomposition products from the FTPSperme-atingthe braided TC insulationFurther testing in the tube furnace demonstrated that heat cleaning the TCinsulation effectivelyremovedthe organic binder andeliminatedthe first error source.The second error sourcewas shown to be mitigated by the addition of amica wraparound each individual TCleadtoact as an impermeable barrier.To understand the applicability of theground-based tube furnace test results to flight,anarc jet testseriesat Boeing’s Large Core Arc Tunnel (LCAT) facilitywas conducted[4].The error sourcesand mitigation strate-giesidentified in the tube furnace testing were substan-tiatedin the arc jet testing.However, the arc jet testing also revealed three new error sources:1.Glass TCinsulation meltingwhich resultsin electrical shorting of the TCeither through di-rect contact between the two leads or through the electrically conductive FTPS materials2.TCwire meltingwhich results in a noisy and/or open-loop TCresponse3.Type K TCwire green-rotwhich results in large calibration errors Scope of the Presentation:This presentation will include a brief discussion onthe effect of electrical shorting on the output of a TC(i.e. how to identify elec-trical shorting in TCdataand what the associated erroris).The tube furnace and arc jet test resultswill be dis-cussedand the solutions LOFTID is implementing to mitigate the error sourcesidentified in the tube furnace and arc jet testingwill be presented.Additionally, futureresearch and development work to eliminateTCerror sourcesfor future missionswill be recommended.

R A Miller↗

Radiation hardened RF transceiver for in-containment environment applications using commercial off the shelf components - 154

The ability to use wireless devices and other electronics in a radiation environment such as Nuclear Power Plant containment is mostly limited by the radiation sensitivity of these electronics. The benefits derived from wireless technology such as the reduction of the amount of cable needed for new sensors, the reduction of the labor associated with cable routing and the reduction or elimination of containment penetrations for new sensors is significant and well understood; unfortunately these benefits have not been fully accomplished yet because of numerous challenges, one being the radiation environment. Functional operation and radiation effects of a transceiver, which utilizes an integrated circuit system-on-chip, with a micro controller, serial driver, phase-locked loop, crystal oscillators and an RF amplifier, will be described. The second type of transceiver that will be discussed uses discrete components such as JFETs, MOSFETs and op-amps to perform the signal conditioning and RF transmission is also described. Operation capabilities and radiation effects for these two approaches as well as energy sources will be described and compared in detail. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Designing Magnetism in High Entropy Oxides

Abstract In magnetic systems, spin and exchange disorder can provide access to quantum criticality, frustration, and spin dynamics, but broad tunability of these responses and a deeper understanding of strong limit disorder are lacking. Here, it is demonstrated that high entropy oxides present a previously unexplored route to designing materials in which the presence of strong local compositional disorder may be exploited to generate tunable magnetic behaviors—from macroscopically ordered states to frustration‐driven dynamic spin interactions. Single‐crystal La(Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 films are used as a model system hosting a magnetic sublattice with a high degree of microstate disorder in the form of site‐to‐site spin and exchange type inhomogeneity. A classical Heisenberg model simplified to represent the highest probability microstates well describes how compositionally disordered systems can paradoxically host magnetic uniformity and demonstrates a path toward continuous control over ordering types and critical temperatures. Model‐predicted materials are synthesized and found to possess an incipient quantum critical point when magnetic ordering types are designed to be in direct competition, this leads to highly controllable exchange bias behaviors previously accessible only in intentionally designed bilayer heterojunctions.

36 MATERIALS SCIENCE↗

A Comparative Study of Ethanol Upgrading to Butadiene Over Rare Earth Elements Incorporated in Dealuminated Beta Zeolites

Copper and rare earth element-containing dealuminated Beta zeolites (CuREE/deAlBeta) are promising catalysts for the conversion of ethanol to C 3+ olefins en route to sustainable aviation fuel. Product selectivities over CuREE/deAlBeta depend on the identity of the REE. Here, in this study, a suite of La/deAlBeta catalysts of varied La loading are prepared, and their reactivities, selectivities, and apparent C-C coupling kinetics in the cascade reaction between ethanol and acetaldehyde are reported. Ex situ and in situ titrations to quantify Lewis acidic La sites quantify distinct numbers of sites, suggesting a distribution of site types. Across a series of REE/deAlBeta catalysts (REE = Y, La, Lu, Yb, Gd), the selectivity to secondary products correlates with the pyridine heats of adsorption at REE Lewis acid sites. The turnover frequency (per Lewis acid site) for C–C coupling was similar across the series of REE/deAlBeta catalysts. Y/deAlBeta and La/deAlBeta, which have the most disparate secondary product selectivities, had similar kinetics for C–C coupling. These findings demonstrate the complexity of quantifying active sites in REE/deAlBeta zeolites, and the sensitivity of the selectivity, but not the reactivity for C–C coupling, to the identity of the REE atom in REE/deAlBeta zeolites.

alcohol upgrading↗

Facile synthesis of PbTe nanoparticles and thin films in alkaline aqueous solution at room temperature

A novel, simple, and cost-effective route to PbTe nanoparticles and films is reported in this paper. The PbTe nanoparticles and films are fabricated by a chemical bath method, at room temperature and ambient pressure, using conventional chemicals as starting materials. The average grain size of the nanoparticles collected at the bottom of the bath is {approx}25 nm. The film deposited on glass substrate is dense, smooth, and uniform with silver gray metallic luster. The film exhibits p-type conduction and has a moderate Seebeck coefficient value ({approx}147 muV K{sup -1}) and low electrical conductivity ({approx}0.017 S cm{sup -1}). The formation mechanism of the PbTe nanoparticles and films is proposed. - PbTe nanoparticles and films were fabricated at room temperature and ambient pressure in an alkaline aqueous solution by a chemical bath method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Syntheses and structure of hydrothermally prepared CsNiX{sub 3} (X=Cl, Br, I)

During reinvestigation of the hydrothermal synthesis reported earlier of the compound cesium nickel phosphide, 'CsNiP', we arrived at a new route to the synthesis of the cesium nickel halide compounds CsNiX{sub 3} (X=Cl, Br, I). The method has also been shown to extend to cobalt and iron compounds. Single crystals of these compounds were synthesized in phosphoric acid in sealed autoclaves. Their structures were determined by single-crystal X-ray diffraction methods. The compounds crystallize in the hexagonal space group P6{sub 3}/mmc in the BaNiO{sub 3} structure type. The synthetic method and the resultant crystallographic details for CsNiCl{sub 3} are essentially identical with those reported earlier for the synthesis and structure of 'CsNiP'. - Graphical abstract: The CsNiX{sub 3} (X=Cl, Br, I) structure. Cesium is blue, nickel is in dark green polyhedra, halide is brown. Highlights: Black-Right-Pointing-Pointer A hydrothermal approach to single crystal growth of cesium transition-metal halides. Black-Right-Pointing-Pointer Reexamination of 'CsNiP' to determine its composition as CsNiCl{sub 3}. Black-Right-Pointing-Pointer X-ray single-crystal structures of CsNiBr{sub 3} and CsNiI{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transition and luminescence properties of GdTiNbO6:Eu3+ formed by hydrothermal route

Highlights: • Phase transition and luminescence of hydrothermal GdTiNbO{sub 6}:Eu{sup 3+} were investigated. • RE{sup 3+} radius 0.1061 nm was the boundary between the aeschynite and euxenite. • GdTiNbO{sub 6}:0.30Eu{sup 3+} was preferred for UV-B excitation, 0.50Eu{sup 3+} for Vis-light excitation. • The decay lifetime of 615 nm emission (ex = 405 nm) was 570∼571 μs. - Abstract: The dependences of phase transition and luminescence properties upon both Eu{sup 3+} concentration and heating temperature in air were investigated for GdTiNbO{sub 6}:Eu{sup 3+} fine crystals formed hydrothermally at 240 °C as aeschynite-type Eu{sub x}Gd{sub 1-x}TiNbO{sub 6} solid solution. The as-prepared aeschynite solid solution in the concentration range x ≥ 0.70 did not show the phase transformation from an aeschynite- to an euxenite-type structure caused by heating at 1300 °C for 1 h in air. The present study suggested that the phase boundary between the aeschynite- and euxenite-type RETiNbO{sub 6} in the EuTiNbO{sub 6}-GdTiNbO{sub 6} system, where RE was a rare earth, lay in the average RE{sup 3+} ionic radius 0.1061 nm. The intense emissions attributed to the {sup 5}D{sub 0}→{sup 7}F{sub 1} and {sup 5}D{sub 0}→{sup 7}F{sub 2} transitions of Eu{sup 3+} for the as-prepared samples were more improved by heating at 1100–1300°C in air. The material doped with 30 mol% Eu{sup 3+} was preferred for UV-B excitation, in contrast, the material with 50 mol% Eu{sup 3+} was preferred for visible light excitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chalcogenide and pnictide nanocrystals from the silylative deoxygenation of metal oxides

Transition metal chalcogenide and pnictide nanocrystals are of interest for optoelectronic and catalytic applications. In this paper, we present a generalized route to the synthesis of these materials from the silylative deoxygenation of metal oxides with trimethylsilyl reagents. Specific nanophases produced in this way include Ni 3 S 2 , Ni 5 Se 5 , Ni 2 P, Co 9 S 8 , Co 3 Se 4 , CoP, Co 2 P, and heterobimetallic (Ni/Co) 9 S 8 . The resulting chalcogenide nanocrystals are hollow, likely due to differential rates of ion diffusion during the interfacial phase transformation reaction (Kirkendall-type effect). In contrast, the phosphide nanocrystals are solid, likely because they form at higher reaction temperatures. Finally, in all cases, simultaneous partial decomposition of the deoxygenating silyl reagent produces a coating of amorphous silica around the newly formed nanocrystals, which could impact their stability and recyclability.

36 MATERIALS SCIENCE↗

The analysis of quantum qutrit entanglements in a qutrit based hyper-sphere in terms of gluing and combining products

In this research the aim is to analyze quantum qutrit entanglements in a new perspective in terms of the reflection of n-dimensional sphere which can be depicted as the set of points equidistant from a fixed central point in three dimensional Euclidian Space which has also real and imaginary dimensions, that can also be depicted similarly as a two unit spheres having same centre in a dome-shaped projection. In order to analyze quantum qutrit entanglements: i- a new type of n dimensional hyper-sphere which is the extend version of Bloch Sphere to hyper-space, is defined ii- new operators and products such as rotation operator, combining and gluing products in this space are defined, iii-the entangled states are analyzed in terms of those products in order to reach a general formula to depict qutrit entanglements and some new patterns between spheres for the analysis of entanglement for different routes in a more simple way in a four dimensional time independent hypersphere.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of commercial sensor manufacturing methods for NOx/NH3 mixed potential sensors for emissions control

The purpose of this research effort is to develop a low cost on-board Nitrogen Oxide (NO{sub x})/Ammonia (NH{sub 3}) sensor that can not only be used for emissions control but has the potential to improve efficiency through better monitoring of the combustion process and feedback control in both vehicle and stationary systems. Over the past decade, Los AJamos National Laboratory (LANL) has developed a unique class of electrochemical gas sensors for the detection of carbon monoxide, hydrocarbons, hydrogen and nitrogen oxides. These sensors are based on the mixed-potential phenomenon and are a modification of the existing automotive lambda (oxygen) sensor and have the potential to meet the stringent sensitivity, selectivity and stability requirements of an on-board emissions/engine control sensor system. The current state of the art LANL technology is based on the stabilization of the electrochemical interfaces and relies on an externally heated, hand-made, tape cast device. We are now poised to apply our patented sensing principles in a mass production sensor platform that is more suitable for real world engine-out testing such as on dynamometers for vehicle applications and for exhaust-out testing in heavy boilers/SCR systems in power plants. In this present work, our goal is to advance towards commercialization of this technology by packaging the unique LANL sensor design in a standard automotive sensor-type platform. This work is being performed with the help of a leading US technical ceramics firm, utilizing commercial manufacturing techniques. Initial tape cast platforms with screen printed metal oxide and Pt sensor electrodes have shown promising results but also clearly show the need for us to optimize the electrode and electrolyte compositions/morphologies and interfaces of these devices in order to demonstrate a sensitive, selective, and stable NO{sub x} sensor. Our previous methods and routes to preparing stable and reproducible mixed potential sensors - in bulk, tape cast, and thin film variants - need to be adapted as a necessary adjunct to address materials challenges resulting from the implementation of commercial manufacturing methods. We also modified the electrodes to demonstrate a NH{sub 3} sensor that can be used in conjunction with the NO{sub x} sensor for feedback control of emissions systems. Once desirable properties are achieved, we will work closely with potential customers in order to dynamometer and boiler test these devices. Ultimately, this will accurately gauge the level of readiness of mixed potential sensor technology for commercialization and eventual use of this important electrochemical technology.

36 MATERIALS SCIENCE↗

Manipulation of Emergent Collective Excitations via Composition Control in Mixed MPX 3 Correlated 2D Antiferromagnets

Transition metal (i.e., Mn, Fe, Cr) and chalcogen (Se) substituents are introduced into single-crystalline NiPS 3 , and the evolution of the two emergent quasi-particle excitations characteristic to the XXZ correlated antiferromagnetism of NiPS 3 (i.e., spin orbit entangled exciton (SOX) and two-magnon scattering (2M )) are investigated as functions of substituent concentration through comprehensive room- and low-temperature photoluminescence (PL) and Raman spectroscopy studies. These findings are further correlated with the magnetic properties of the same set of compounds reported in prior studies. The work revealed that the SOX emission intensities and linewidths are mainly controlled by the magnetic anisotropy and spin orientations, and are strongly suppressed by the introduction of substituents. The suppression depends on the type of substituent, with Fe affecting the SOX emission more than Mn and Cr. The 2 M scattering is linked to short-range correlations and exhibits greater resiliency against metal atom substitution. While the 2M peak at low temperature gets suppressed and red-shifted in frequency with increasing concentrations of all the substituents, Fe induces the weakest suppression compared to all other substituents. Altogether, these findings revealed the introduction of substituents as a powerful route to control the emergent collective excitations in NiPS 3 and mixed-MPX 3 materials.

2D magnet↗

Sequential Infiltration Synthesis of Cadmium Sulfide Discrete Atom Clusters

Exposure of soft material templates to alternating volatile chemical precursors can produce inorganic deposition within the permeable template (e.g. a polymer thin film) in a process akin to atomic layer deposition (ALD). While such sequential infiltration synthesis (SIS) processes have now been demonstrated for many metal oxides, we report an SIS process for a transition metal sulfide – CdS. Gas phase dimethyl cadmium and hydrogen sulfide precursors infiltrated into poly(4-vinylpyridine) thin films result in the 3D-nucleation of clusters consistent with a cubane-type Cd 4 S 4 core that are variably terminated with methyl, thiol and hydroxy capping ligands. First principles models and simulation of few-atom Cd-based clusters are consistent with electronic and vibrational spectroscopy and grazing-incidence total X-ray scattering measurements of 3D-cluster-arrays synthesized at 80 °C. The direct synthesis of few-atom transition metal sulfide clusters within polymer thin films will provide a versatile new route to precision architectures for light-absorbing materials including solar energy harvesting and conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical and electrical properties of Cu-based all oxide semi-transparent photodetector

Zero-bias operating Cu oxide-based photodetector was achieved by using large-scale available sputtering method. Cu oxide (Cu{sub 2}O or CuO) was used as p-type transparent layer to form a heterojunction by contacting n-type ZnO layer. All metal-oxide materials were employed to realize transparent device at room temperature and showed a high transparency (>75% at 600 nm) with excellent photoresponses. The structural, morphological, optical, and electrical properties of Cu oxides of CuO and Cu{sub 2}O are evaluated in depth by UV-visible spectrometer, X-ray diffraction, scanning electron microscopy, atomic force microscopy, Kelvin probe force microscopy, and Hall measurements. We may suggest a route of high-functional Cu oxide-based photoelectric devices for the applications in flexible and transparent electronics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct Encapsulation of Spent Ion-exchange Resins at the Dukovany Nuclear Power Plant, Czech Republic - 12367

At the Dukovany Nuclear Power Plant there are large amounts of spent ion exchange resins contained within storage tanks. These resins are a product of the operation of an Active Water Purification System within the Power Plant. Activity levels of the resins are in the range of 105 to 10{sup 6} Bq/l and the main isotopes present are Co-60, Cs-137, Mn-54 and Ag-110m. In order to maintain storage tank availability throughout the planned lifetime of the Power Plant these resins must be removed and disposed of safely. The storage tanks do not have an effective retrieval route for the resins and the installed agitation system is inoperable. A proven system for retrieving and directly encapsulating these resins to a standard required for the Czech repository is described, together with an overview of operational performance. Experience gained from this and other projects has highlighted some common challenges relating to the treatment of ion-exchange resins and sludges. There are common approaches that can assist in overcoming these challenges. 1. Transport resin / sludge type waste over as short a distance as possible to avoid issues with line plugging. 2. Transport these wastes once and once only wherever possible. 3. Try to keep the treatment process as simple as possible. With sludge or resin handling equipment consider the physical properties foremost - radiological issues can be addressed within any subsequent design. 4. Consider the use of dry-mix technologies. This avoids the requirement for expensive and complicated grouting plant. 5. Avoid the use of make up water for transport purposes if at all possible - it introduces secondary waste that needs to be treated at additional cost. 6. Consider alternative disposal techniques. SIAL{sup R} is AMEC's preferred technology as we developed it and understand it well - additionally the waste loading factors are much higher than for cement. 7. Consider final waste volumes when selecting the disposal technique. Disposal costs will probably make up the bulk of the total life-time cost for any retrieval / encapsulation project. 8. Have a selection of ion-exchange resin/sludge retrieval techniques available - it is difficult and time consuming to develop a technique that will cope with all eventualities, particularly when there are unknown conditions. It is much more productive to switch retrieval techniques as appropriate to deal with evolving conditions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Oxidation Behavior and Property Degradation of Nuclear Graphites

During its multidecade operation in the core of nuclear reactors, graphite components are subjected to aggressive and continuous exposure to a high field of ionizing and neutron irradiation, high temperature, and various types of present and postulated chemical attacks. High density, high crystallinity polygranular synthetic graphite is unique among other materials for its extraordinary capacity of resisting and adapting to the aggression inflicted by high temperature, high energy neutron bombardment and ionizing gamma radiation. But, as a carbonaceous material, even though of very high purity, graphite is reactive towards common oxidizing agents: oxygen, carbon dioxide, water. Safe operation of HTGRs relies, among other aspects, on engineered safeguard systems for efficient and continuous protection of graphite components against oxidation. Graphite oxidation behavior was, and continues to be, an important direction of theoretical and experimental research, engineering analyses, models and simulations, and design and safety regulations. The avalanche of publications, reports, experimental data, computer codes, and regulatory documents related to oxidation behavior of nuclear graphite is now accelerating to new levels, prompted by the increased interest for nuclear energy as a clean, carbon-free energy source. Even though public’s perception of nuclear energy advantages may still be influenced by the memories of past accidents of nuclear reactors from generations II and III, the community of informed scientists and engineers, regulators and statemen knows that generation IV of nuclear reactors is designed at very high safety standards, doubled by great advances of scientific knowledge and technological progress. One of routes of these recent advances is directed at better understanding of graphite oxidation behavior, its relationship with graphite manufacturing and microstructural properties, along with the effects of various environmental factors and process variables. Together, the recent progress in manufacturing, properties characterization, and modeling of intricated physical and chemical processes that concur to the oxidation behavior led to development of powerful simulation codes able to analyze various scenarios of normal operation and hypothetical off-normal events, and thus to clearly specify the allowable parameters envelopes for the designers, constructors, and operators of current and future modular HTGRs. This review begins with an introduction on manufacturing methods, structure, and properties of nuclear graphite, including basic requirements that this specialty graphite type must satisfy for nuclear use. It continues with a chapter on environmental effects on nuclear graphite, where emphasis is placed less on irradiation and much more on oxidation phenomena, their safety implications, and the basic traits of chronic and acute oxidation by air (oxygen) and water (humidity, steam). Particular attention is placed on the three graphite grades of interest for this document (IG-110, NBG-18, PCEA). A chapter on properties degradation induced by oxidation follows, with focus on density, dimensional, and mechanical properties changes. The next chapter is intended as a brief review of various approaches used for modeling of graphite oxidation behavior. It summarizes the progress of oxidation models, from the early attempts to complex computational approaches interfaced with specialized computer codes designed for nuclear reactor simulations. Last, a list is presented of knowledge gaps where more research is needed. A short summary concludes the review.

36 MATERIALS SCIENCE↗

Noninvasive Near‐Field Spectroscopy of Single Subwavelength Complementary Resonators

Abstract Subwavelength metallic resonators provide a route to achieving strong light–matter coupling by means of tight confinement of resonant electromagnetic fields. Investigation of such resonators however often presents experimental difficulties, particularly at terahertz (THz) frequencies. A single subwavelength resonator interacts weakly with THz beams, making it difficult to probe it using far‐field methods, whereas arrays of resonators exhibit inter‐resonator coupling, which affect the resonator spectral signature and field confinement. Here, traditional far‐field THz spectroscopy is systematically compared with aperture‐type THz near‐field microscopy for investigating complementary THz resonators. While the far‐field method proves impractical for measuring single resonators, the near‐field technique gives high signal‐to‐noise spectral information, only achievable in the far‐field with resonator arrays. At the same time, the near‐field technique allows to analyze single resonators without significant interaction with the near‐field probe. Furthermore, the near‐field technique allows highly confined fields and surface waves to be mapped in space and time. This information gives invaluable insight into spectral response in resonator arrays. This near‐field microscopy and spectroscopy method enables investigations of strong light–matter coupling at THz frequencies in the single‐resonator regime.

Hale, Lucy L.↗

Augmented photocatalytic activity and luminescence response of Tb³⁺ doped nanoscale titania systems

The present work reports on the effect of Tb³⁺ doping on the luminescence and photocatalytic performance of nano-structured titania derived through a sol-gel route. X-ray diffraction patterns have revealed the existence of anatase phase with and without Tb³⁺ doping and with an improved orientation factor along (004) and (200) planes. Transmission electron microscopy and selective area electron diffraction studies, while exhibiting ample poly-crystallinity feature, have predicted an average particle size of ~9 nm and ~6 nm for the un-doped and 5% Tb³⁺ doped nano-titania samples; respectively. Apart from emissions accompanied by different types of defects, Tb³⁺ related transitions, such as, ⁵D₃ → ⁷F₅, ⁵D₃ → ⁷F₄, and ⁵D₄ → ⁷F₆ were identified in the photoluminescence spectra. Brunauer-Emmett-Teller surface area analysis, as carried out on a Tb³⁺ doped nano-titania system, has demonstrated a more-open hysteretic loop owing to significant difference of N₂ adsorption/desorption rates. The photocatalytic activity of nano-titania, as evaluated from the nature of degradation of methyl orange under UV illumination, exhibited the highest efficiency for a Tb³⁺ doping level of 2.5%. The augmented photocatalytic degradation has also been discussed in the light of a model based on pseudo first-order kinetics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗