SEARCH · Engineering Papers

Results for “resonance frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Dual-band reactively loaded microstrip antenna

A previously derived theory is applied to a microstrip antenna with a reactive load to produce a dual-band radiator. A model consisting of a rectangular patch radiator loaded with a variable length short-circuited coaxial stub was investigated experimentally. Comparisons of theoretical predictions and experimental data are made for the impedance and resonant frequencies as a function of the position of the load, the length of the stub, and the characteristic impedance of the stub.

Richards, W. F.↗

NASA NTRS1985

Experimental study of the oscillations of a rotating drop

Two- and three-lobed oscillations of a rotating liquid drop immersed in an immiscible fluid of comparable density and the same angular velocity were studied experimentally. Using acoustically suspended drops, it has been found that the relative change in the resonance frequencies of the axisymmetric drop-shape oscillations Delta omega-l/omega-l(0) is proportional to the square of the normalized angular speed (Omega/omega-l/0)-squared when omega-l greater than 2 Omega. This is in agreement with a recent analytical study of the same problem. Some preliminary results regarding the effect of rotation on the free-decay rate of the two-lobed oscillations are also presented.

Annamalai, P.↗

NASA NTRS1985

The use of an optical data acquisition system for bladed disk vibration analysis

A new concept in instrumentation was developed by engineers at NASA Lewis Research Center to collect vibration data from multi-bladed rotors. This new concept, known as the optical data acquisition system, uses optical transducers to measure bladed tip deflections by reflection of light beams off the tips of the blades as they pass in front of the optical transducer. By using an array of transducers around the perimeter of the rotor, detailed vibration signals can be obtained. In this study, resonant frequencies and mode shapes were determined for a 56 bladed rotor using the optical system. Frequency data from the optical system was also compared to data obtained from strain gauge measurements and finite element analysis and was found to be in good agreement.

Lawrence, C.↗

NASA NTRS1986

Geodesy by radio interferometry: Studies of the forced nutations of the earth. I - Data analysis. II - Interpretation

Very long baseline interferometry (VLBI) observations of compact extragalactic radio sources collected in North America and Europe between July 1980-December 1984 are analyzed. The nutations derived from VLBI data are compared with the nutations in the Wahr series (1981). Good correlation of the data is observed; however, it is detected that a correction of -1.80 + or - 0.18-i(0.42 + or - 0.18) is required for the amplitude of the retrograde annual nutation in the Wahr series. The change in free core nutation resonance frequency is calculated to explain the derivation in the retrograde annual nutation. It is concluded that VLBI earth nutation measurements have sufficient accuracy to be sensitive to core-mantle boundary properties.

Herring, T. A.↗

NASA NTRS1986

The evaluation of single crystal superalloys for turbopump blades in the SSME

This paper discusses single-crystal nickel-base superalloys for use in gaseous hydrogen environments, like the Space Shuttle Main Engine (SSME). PWA 1480E was chosen as a candidate alloy based on strength retention in hydrogen environments. Selection of single-crystal-alloy primary and secondary crystallographic axes allows tailoring of the airfoil resonant frequency as a function of orientation. PWA 1480E 111-line primary orientation proved to be the most hydrogen-resistant orientation. By choosing the proper primary and secondary orientation combinations, the fourth excitation mode of the SSME may be avoided.

Bowen, K.↗

NASA NTRS1986

The Helmholtz resonance behavior of single and multiple rooms

The results of exploratory measurements of the noise fields inside rooms which are excited to resonance either acoustically or mechanically are presented. The data illustrate the nature and extent of the sound pressure level enhancements in single rooms and also how multiple rooms may resonate by means of either acoustic or mechanical coupling. Sound pressure level enhancements of about 5 dB were measured during resonance of rooms having flexible walls. For such conditions the sound pressure levels in the room were essentially uniform and in phase. Variability of up to 20 dB was measured in a room hallway complex having significant acoustic interactions. Resonant frequency prediction methods which work well at model scale, give only fair results for rooms.

Hubbard, H. H.↗

NASA NTRS1986

Computer-aided design and distributed system technology development for large space structures

Proposed large space structures have many characteristics that make them difficult to analyze and control. They are highly flexible, with components mathematically modeled by partial differential equations or very large systems of ordinary differential equations. They have many resonant frequencies, typically low and closely spaced. Natural damping may be low and/or improperly modeled. Coupled with stringent operational requirements of orientation, shape control, and vibration suppression, and the inability to perform adequate ground testing, these characteristics present an unconventional identification and control design problem to the systems theorist. Some of the research underway within Langley's Spacecraft Control Branch, Guidance and Control Division aimed at developing theory and algorithms to treat large space structures systems identification and control problems is described. The research areas to be considered are computer-aided design algorithms, and systems identification and control of distributed systems.

Armstrong, Ernest S.↗

NASA NTRS1987

An experimental investigation of parasitic microstrip arrays

The characteristics of a parasitic microstrip antenna array with a center-fed patch are experimentally investigated. The parasitic array is composed of identical parasitic patches which are symmetrically arranged and electromagnetically coupled to a center-fed patch. The shape and dimensions of the parasitic patches and their positions relative to the center-fed patch are parameters in the study. To show mutual coupling effects between radiating and nonradiating edges of adjacent patches, the impedance and radiation characteristics of a three-element parasitic array excited with (0.1) mode are examined, and compared to that of a single patch. Experimental data indicate that the presence of parasitic patches has significant effects upon the gain, resonant frequency, and impedance bandwidth of the array.

Lee, Richard Q.↗

NASA NTRS1986

A study of the damping capacity of graphite epoxy composites in a vacuum

The damping properties of a graphite epoxy composite material (used in the construction of the Hubble Space Telescope) are measured under a variety of conditions in a vacuum chamber to simulate conditions in space. An improved method is proposed which utilizes several points of the response curve near a resonance to estimate the damping ratio and the undamped resonance frequency. The damping of a graphite epoxy tube is monitored for four weeks to study moisture desorption and temperature effects. A significant variation is observed in the damping ratio with temperature.

Rao, Mohan D.↗

NASA NTRS1988

Acoustical Measurement Of Mine-Shaft Length

Acoustical system proposed to measure depth of a "blind" shaft. Acoustic wave guided by shaft and provides estimate of shaft length, from which volume estimated. Acoustic-generator system determines resonant-frequency difference to measure shaft length.

Heyman, Joseph S.↗

NASA NTRS1987

Hydromagnetic wave excitation by ionised interstellar hydrogen and helium in the solar wind

The modification of the interplanetary MHD wave spectrum due to the pickup and isotropization of interstellar hydrogen and helium in the solar wind is predicted on the basis of quasi-linear and (for hydrogen) WKB theory. Results indicate that pickup helium has a very small (unobservable) effect on the solar wind wave spectrum, but that pickup hydrogen results in substantial modifications of cyclotron resonant frequencies (about 0.01 Hz at about 7 AU). It is noted that the predicted modifications beyond about 5 AU are substantial and could be observable at spacecraft frequencies greater than about 0.005 Hz if not degraded by turbulent wave-wave interactions or stochastic ion acceleration.

Lee, Martin A.↗

NASA NTRS1988

Novel technique to measure the microwave response of high T(c) superconductors between 4.2 and 200 K

This paper describes a novel technique for measurements of the complex surface impedance Z(s) of high-T(c) superconductors over an extremely wide range of temperature, from 4.2 K and at least 200 K. The technique uses a superconducting Pb-plated Cu high-Q-cavity resonator operated at an ambient temperature of 4.2 K, with the sample (typically a 3-mm-diam x 1-mm-thick disk) mounted on a sapphire rod in the center of cavity, at a high B-field and thermally insulated from the cavity walls, making it possible to control the sample temperature externally. Since the cavity characteristics are dominated by the sample properties (the contribution of the Pb-covered walls maintained at 4.2 K is negligible), measurement of the cavity Q and resonant frequency makes it possible to measure Zs as a function of the sample temperature. The Z(s) values for bulk Y1Ba2Cu3O(y) and La(1.85)Sr(0.15)CuO4 were measured over a temperature range 4.2-100 K.

Sridhar, S.↗

NASA NTRS1989

Determining Equilibrium Position For Acoustical Levitation

Equilibrium position and orientation of acoustically-levitated weightless object determined by calibration technique on Earth. From calibration data, possible to calculate equilibrium position and orientation in presence of Earth gravitation. Sample not levitated acoustically during calibration. Technique relies on Boltzmann-Ehrenfest adiabatic-invariance principle. One converts resonant-frequency-shift data into data on normalized acoustical potential energy. Minimum of energy occurs at equilibrium point. From gradients of acoustical potential energy, one calculates acoustical restoring force or torque on objects as function of deviation from equilibrium position or orientation.

Barmatz, M. B.↗

NASA NTRS1989

High intensity acoustic tests of a thermally stressed aluminum plate in TAFA

An investigation was conducted in the Thermal Acoustic Fatigue Apparatus at the Langley Research Center to study the acoustically excited random motion of an aluminum plate which is buckled due to thermal stresses. The thermal buckling displacements were measured and compared with theory. The general trends of the changes in resonances frequencies and random responses of the plate agree with previous theoretical prediction and experimental results for a mechanically buckled plate.

Ng, Chung Fai↗

NASA NTRS1989

Acoustic response of a rectangular waveguide with a strong transverse temperature gradient

An acoustic wave equation was developed for a perfect gas with spatially-variable temperature. The strong-gradient wave equation was used to analyze the response of a rectangular wave guide containing a thermally-stratified gas. It was assumed that the temperature gradient is constant, representing one-dimensional heat transfer with a constant coefficient of conductivity. The analysis of the waveguide shows that the resonant frequencies of the waveguide are shifted away from the values that would be expected from the average temperature of the waveguide. For small gradients, the frequency shift is proportional to the square of the gradient. The factor of proportionality is a quadratic function of the natural frequency of the waveguide with uniform temperature. An experiment is designed to verify the essential features of the strong-gradient theory.

Zorumski, William E.↗

NASA NTRS1989

Acoustic levitation and the Boltzmann-Ehrenfest principle

The Boltzmann-Ehrenfest principle of adiabatic invariance relates the acoustic potential acting on a sample positioned in a single-mode cavity to the shift in resonant frequency caused by the presence of this sample. This general and simple relation applies to samples and cavities of arbitrary shape, dimension, and compressibility. Positioning forces and torques can, therefore, be determined from straightforward measurements of frequency shifts. Applications to the Rayleigh disk phenomenon and levitated cylinders are presented.

Putterman, S.↗

NASA NTRS1990

Experimental feasibility of investigating acoustic waves in Couette flow with entropy and pressure gradients

The feasibility is discussed for an experimental program for studying the behavior of acoustic wave propagation in the presence of strong gradients of pressure, temperature, and flow. Theory suggests that gradients effects can be experimentally observed as resonant frequency shifts and mode shape changes in a waveguide. A convenient experimental geometry for such experiments is the annular region between two co-rotating cylinders. Radial temperature gradients in a spinning annulus can be generated by differentially heating the two cylinders via electromagnetic induction. Radial pressure gradients can be controlled by varying the cylinder spin rates. Present technology appears adequate to construct an apparatus to allow independent control of temperature and pressure gradients. A complicating feature of a more advanced experiment, involving flow gradients, is the requirement for independently controlled cylinder spin rates. Also, the boundary condition at annulus terminations must be such that flow gradients are minimally disturbed. The design and construction of an advanced apparatus to include flow gradients will require additional technology development.

Parrott, Tony L.↗

NASA NTRS1989

Acoustic convective system

A small and simple system is provided for cooling or heating a small component by flowing air or other fluid over it, which does not require any macroscopic moving parts. The system includes a transducer and reflector that are spaced apart with the component between them, and with the transducer being operated at a frequency resonant to the spacing between it and the reflector. The resulting standing wave pattern produces acoustic streaming which results in the circulating of air or other fluid in the environment across the component. The system is especially useful in the reduced gravity environment of outer space because of the absence of any buoyancy-induced convection there.

Eugene H Trinh↗