Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Estimation of Syringyl Units in Wood Lignins by FT-Raman Spectroscopy

Syringyl (S) lignin content and the syringyl-to-guaiacyl (S/G) lignin ratio are important characteristics of wood and lignocellulosic biomass. While numerous methods are available for estimating S lignin units and the S/G ratio, in this work, a new method based on Raman spectroscopy that uses the 370 cm –1 Raman band-area intensity (370-area) was developed. The reliability of the Raman method for determining S content was first tested by the quantitative analysis of three syringyl lignin models by sampling them, separately, in dioxane and in Avicel. Good linear correlations between the 370 cm –1 intensity and model concentrations were obtained. Next, the percent syringyl (%S) lignin units in various woods were measured by correlating the 370 cm –1 Raman intensity data with values of S units in lignin determined by three regularly used methods, namely, thioacidolysis, DFRC, and 2D-HSQC NMR. The former two methods take into account only the monomers cleaved from β–O–4-linked lignin units, whereas the NMR method reports S content on the whole cell wall lignin. When the 370-area intensities and %S values from the regularly used methods were correlated, good linear correlations were obtained (R 2 = 0.767, 0.731, and 0.804, respectively, for the three methods). The correlation with the highest R 2 , i.e., with the 2D NMR approach, is introduced for estimating S units in wood lignins by Raman spectroscopy as, in principle, both represent the whole cell wall lignin and not just the portion of lignin that gets cleaved to release monomers. The Raman analysis method is quick, uses minimal harmful chemicals, is carried out nondestructively, and is insensitive to the wet or dry state of the sample. The only limitations are that the sample of wood contains at least 30% S and not be significantly fluorescent, although the latter can be mitigated in some cases.

09 BIOMASS FUELS↗
DOE OSTI2017

Water Adsorption and Dissociation on Polycrystalline Copper Oxides: Effects of Environmental Contamination and Experimental Protocol

We use ambient-pressure X-ray photoelectron spectroscopy (APXPS) to study chemical changes, including hydroxylation and water adsorption, at copper oxide surfaces from ultrahigh vacuum to ambient relative humidities of ~5%. Polycrystalline CuO and Cu 2 O surfaces were prepared by selective oxidation of metallic copper foils. For both oxides, hydroxylation occurs readily, even at high-vacuum conditions. Hydroxylation on both oxides plateaus near ~0.01% relative humidity (RH) at a coverage of ~1 monolayer. In contrast to previous studies, neither oxide shows significant accumulation of molecular water; rather, both surfaces show a high affinity for adventitious carbon contaminants. Results of isobaric and isothermic experiments are compared, and the strengths and potential drawbacks of each method are discussed. We also provide critical evaluations of the effects of the hot filament of the ion pressure gauge on the reactivity of gas-phase species, the peak fitting procedure on the quantitative analysis of spectra, and rigorous accounting of carbon contamination on data analysis and interpretation. Lastly, this work underscores the importance of considering experimental design and data analysis protocols during APXPS experiments with water vapor in order to minimize misinterpretations arising from these factors.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Mesoporous layered aluminosilicates prepared from protozeolitic nanoclusters: Synthesis, physicochemical and catalytic properties

Mesoporous layered aluminosilicates were prepared by a two-stage route using tetrapropylammonium hydroxide (TPAOH) and hexadecylamine (HAD). First, aluminosilicate sols were prepared from very dilute solutions under mild conditions. The sols contained aluminosilicate nanoclusters of the average size 4 – 5 nm. 27Al NMR studies demonstrated that tumbling alone of the small aluminosilicate nanoclusters due to Brownian motions was removing effectively chemical shift anisotropy, dipolar interactions and narrowing quadrupolar interactions; thus, magic-angle-spinning was not required for obtaining good quality 27Al and 29Si NMR spectra of the sols studied. Quantitative analysis of 29Si NMR spectra allowed following evolution of the signals in time, providing insight into dynamical behavior during formation of sols. Second, the sols with the Si/Al ratios of 12 – 70 were used for preparation of the X-ray amorphous aluminosilicate materials. The samples exhibited good sorption properties due to the presence of the ca. 3 nm slit mesopores, coupled with the presence of Brønsted and Lewis acid sites. The initial reaction rate in the liquid-phase isomerization of ?-pinene and the turnover frequency (TOF) were estimated at relatively low temperature of 348 K. The mesoporous aluminosilicate materials turned out to be very active catalytically; the initial reaction rate was surpassing the rate measured over the reference zeolitic and non-zeolitic materials. TOF on mesoporous materials was also high, 0.15 and 0.27 s-1, in comparison with ZSM-5 (0.02 s-1) and ferrierite type zeolites (0.06 – 0.09 s-1).

Onik, Katarzyna↗
DOE OSTI2025

Resolving the Valence of Iron Oxides by Resonant Photoemission Spectroscopy

Precisely determining the oxidation states of metal cations within variable-valence transition metal oxides remains a significant challenge, yet it is crucial for understanding and predicting the properties of these technologically important materials. Iron oxides, in particular, exhibit a remarkable diversity of electronic structures due to the variable valence states of iron (Fe 2+ and Fe 3+ ). A quantitative analysis using conventional X-ray photoelectron spectroscopy (XPS) is challenging because of the strong overlap of the Fe 2p XPS peaks from different oxidation states. Here, in this study, we show how this problem can be resolved using Resonant Photoemission Spectroscopy (ResPES), which unambiguously distinguishes Fe oxidation states and spectroscopically estimates the composition ratio of Fe cation valence states in the complex Fe oxides. We demonstrate this in the model case of a FeO 2 monolayer film on Pt(111), showing that the FeO 2 film consists of an equal mixture of Fe 2+ and Fe 3+ cations, yielding an average valence of +2.5, contrary to the +3 valence proposed based on density functional theory (DFT).

Chen, Hao [Lawrence Berkeley National Laboratory (↗
DOE OSTI2025

Ultrafast Electron–Dipole Interactions in TeO- Photodetachment

We present direct experimental evidence of ultrafast coupling between ejected electrons and dynamically forming dipole moments in TeO, captured during the photodetachment of TeO?. By combining high-resolution cryogenic photoelectron spectroscopy with velocity-map imaging, we assess previously inaccessible excited states and resolve rich photoelectron angular distributions (PADs) that encode electron–dipole interactions. Systematic comparison of PADs from femtosecond and picosecond lasers reveals striking deviations from free-electron behavior, representing direct evidence of a transient dipole moment evolving on femtosecond timescales. Quantitative analysis pinpoints the dipole buildup time to be within ~60 fs, providing real-time access to the birth of a molecular dipole field. This work establishes a general approach to probing electron-dipole interactions in their formation stages, offering fundamental insights into the ultrafast interplay between departing electrons and transient polar systems — a process that lies at the core of atomic, molecular, and ultrafast physics.

Yang, Fan↗
DOE OSTI2022

Putting Humpty Dumpty Back Together Again: What Does Protein Quantification Mean in Bottom-Up Proteomics?

Bottom-up proteomics provides peptide measurements and has been invaluable for moving proteomics into large-scale analyses. Commonly, a single quantitative value is reported for each protein-coding gene by aggregating peptide quantities into protein groups following protein inference or parsimony. However, given the complexity of both RNA splicing and post-translational protein modification, it is overly simplistic to assume that all peptides that map to a singular protein-coding gene will demonstrate the same quantitative response. Here, by assuming that all peptides from a protein-coding sequence are representative of the same protein, we may miss the discovery of important biological differences. To capture the contributions of existing proteoforms, we need to reconsider the practice of aggregating protein values to a single quantity per protein-coding gene.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Quantitative Characterization of a Desalination Membrane Model System by X-ray Photoelectron Spectroscopy

Aromatic polyamide films form the active layer in reverse osmosis desalination membranes. Despite widespread use of this technology, it suffers from low rejection rates for certain water contaminants and from membrane fouling. Through a better understanding of the fundamental surface chemical processes during reverse osmosis desalination, advances in membrane and material design are expected. The recent invention of a molecular layer-by-layer (mLbL) preparation technique yields films that are sufficiently smooth to warrant investigation with high-resolution microscopy and spectroscopy methods. In this study, we present high-resolution, quantitative X-ray photoelectron spectroscopy (XPS) data on the surface chemistry of ultrathin polyamide films that can serve as a model system for desalination membranes. We show that a quantitative analysis of the XPS spectra gives information about the functional groups of the film as well as other compounds present due to the synthesis under ambient conditions. Unpolymerized functional groups are identified and aid in understanding the degree of cross-linking. Investigation of polymers with synchrotron-based XPS requires taking beam-induced changes into account. We quantify X-ray beam damage and show that beam damage to the polyamide is limited, allowing long-term investigation of thin polyamide films. Characterizing mLbL-grown films via high-resolution XPS is the basis for a better understanding of the chemical interplay of polyamide surface functional groups with the major components of desalination systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Determination of Interfacial Mixing in Tapered Block Polymer Thin Films: Experimental and Theoretical Investigations

Tapered block polymers are an emerging class of macromolecules with unique and diverse self-assembly behavior and properties. Here, we directly examine the manipulation of self-assembled interfaces in poly(isoprene- b -styrene) (I-S)-based block polymers (BPs) by synthesizing non-tapered (I-S), normal tapered (I-IS-S), and inverse tapered (I-SI-S) BPs with controlled monomer segment distributions. We provide the first direct measurements of interfacial mixing for these tapered polymers through X-ray reflectivity (XRR). The density profiles from XRR are compared to results from fluids density functional theory (fDFT) with good agreement. We find that our normal tapered BPs (30 vol % tapering) have similar interfacial mixing to diblock polymers, while our inverse tapered BPs (30 vol % tapering) have much wider interfaces. Additionally, differential scanning calorimetry (DSC) studies elucidate the influence of tapering on the glass transition temperature (T g ) and change of heat capacity (ΔC P ) for each BP phase, and quantitative analysis from ΔC P also indicates enhanced mixing in the inverse tapered I-SI-S BPs. Finally, we investigate the free surface morphologies of these tapered polymers in thin film geometries. The inverse tapered BP form larger island/hole structures likely due to decreased surface elasticity from mixing as a result of the modified interblock interfacial characteristics. These results demonstrate that BPs with similar molecular weights and compositions can exhibit different thermodynamic properties and free surface morphologies in thin film geometries, as influenced by monomer sequence.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural Complexities in Sodium Ion Conductive Antiperovskite Revealed by Cryogenic Transmission Electron Microscopy

Here we use low-dose cryogenic transmission electron microscopy (cryo-TEM) to investigate the atomic-scale structure of antiperovskite Na 2 NH 2 BH 4 crystals by preserving the room-temperature cubic phase and carefully monitoring the electron dose. Via quantitative analysis of electron beam damage using selected area electron diffraction, we find cryogenic imaging provides 6-fold improvement in beam stability for this solid electrolyte. Cryo-TEM images obtained from flat crystals revealed the presence of a new, long-range-ordered supercell with a cubic phase. The supercell exhibits doubled unit cell dimensions of 9.4 Å × 9.4 Å as compared to the cubic lattice structure revealed by X-ray crystallography of 4.7 Å × 4.7 Å. The comparison between the experimental image and simulated potential map indicates the origin of the supercell is a vacancy ordering of sodium atoms. This work demonstrates the potential of using cryo-TEM imaging to study the atomic-scale structure of air- and electron-beam-sensitive antiperovskite-type solid electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Phonon Polariton-assisted Infrared Nanoimaging of Local Strain in Hexagonal Boron Nitride

Strain plays an important role in condensed matter physics and materials science because it can strongly modify the mechanical, electrical, and optical properties of a material and even induce a structural phase transition. Strain effects are especially interesting in atomically thin two-dimensional (2D) materials, where unusually large strain can be achieved without breaking them. Measuring the strain distribution in 2D materials at the nanometer scale is therefore greatly important but is extremely challenging experimentally. Here, we use near-field infrared nanoscopy to demonstrate phonon polariton-assisted mapping and quantitative analysis of strain in atomically thin polar crystals of hexagonal boron nitride (hBN) at the nanoscale. A local strain as low as 0.01% can be detected using this method with ~20 nm spatial resolution. Such ultrasensitive nanoscale strain imaging and analysis technique opens up opportunities for exploring unique local strain structures and strain-related physics in 2D materials. In addition, experimental evidence for local strain-induced phonon polariton reflection is also provided, which offers a new approach to manipulate light at deep subwavelength scales for nanophotonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Oxidative Degradation of Multi-Carbon Substrates by an Oxidic Cobalt Phosphate Catalyst

The development of heterogeneous catalysts to affect the activation of recalcitrant biomolecules has applications for biomass processing, biomass fuel cells, and wastewater remediation. In this work, we demonstrate that a cobalt oxygen evolution catalyst (Co-OEC) can catalyze the oxidation of carbon feedstocks completely to CO 2 . A quantitative analysis of the product distribution from the oxidative degradation of the C 2 compound, ethylene glycol, is elaborated and a reaction sequence is proposed. The Co-OEC is also found to be competent for oxidatively degrading C 2+ compounds, including glucose and lignin, to carbon dioxide at consequential Faradaic efficiencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Chemically Fueled Transient Geometry Changes in Diphenic Acids

Transient changes in molecular geometry are key to the function of many important biochemical systems. Here, we show that diphenic acids undergo out-of-equilibrium changes in dihedral angle when reacted with a carbodiimide chemical fuel. Treatment of appropriately functionalized diphenic acids with EDC (N-(3-(dimethylamino)propyl)-N'-ethylcarbodiimide hydrochloride) yields the corresponding diphenic anhydrides, reducing the torsional angle about the biaryl bond by ~45°, regardless of substitution. In the absence of steric resistance, the reaction is well-described by a simple mechanism; the resulting kinetic parameters can be used to derive important properties of the system, such as yields and lifetimes. In conclusion, the reaction tolerates steric hindrance ortho to the biaryl bond, although the competing formation of (transient) byproducts complicates quantitative analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantitative Measurement of Li-Ion Concentration and Diffusivity in Solid-State Electrolyte

Here, we present a quantitative method to measure the concentration and diffusivity of Li ion in a solid-state electrolyte with nanoscale depth resolution. We designed a standard sample with different depths of trenches and used time-of-flight secondary ion mass spectroscopy, inductively coupled plasma optical emission spectroscopy, three-dimensional (3D) optical microscopy, and electrochemical strain microscopy to obtain effective Li-ion concentration and the corresponding diffusivity as a function of depth. As a result, we verified the dependence of electromechanical strain induced by ionic oscillation on mobile-ion concentration. We also showed the diffusivity change as a function of effective concentration and discussed the difference in diffusivity near the surface and inside the bulk. Our method can be widely used for electromechanical strain in various ionic conductors, rendering our technique universal for quantitative analysis of ionic dynamics at a multiscale.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Using In Situ High-Energy X-ray Diffraction to Quantify Electrode Behavior of Li-Ion Batteries from Extreme Fast Charging

Extreme fast charging (XFC, =15 min charging time) of Li-ion batteries (LIBs) has been proposed as an immediate target to increase the commercial appeal of electric vehicles. However, XFC of LIBs is associated with the degradation of battery performance and safety concerns. Quantitative and simultaneous characterization of various components during cell degradation represents a major experimental challenge. In this work, we outline a methodology for the use of spatially resolved, high-energy X-ray diffraction as a quantitative, in situ method of mapping the degradation of LIBs. We use this approach to study the battery cell capacity loss, both locally (mm scale) and globally over the entire cell (cm scale). Specifically, our workflow allows us to quantify the total amount of plated Li on the anode, as well as its spatial correlation to the structural properties of the anode and cathode. The method complements existing optical methods to resolve the spatial heterogeneity of local degradation mechanisms such as Li plating and provides simultaneous insights into concomitant anode state-of-charge variability. We apply it to commercially relevant single-layer pouch cells with the graphite anode and the LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathode. Our results show that Li plating occurs heterogeneously on the graphite anode and that it is spatially correlated to the extent of anode lithiation. In this work, we anticipate that the described workflow will allow for understanding multiscale degradation in energy-storage devices beyond LIBs, where quantitative analysis at a local and global length scale can be performed without the necessity to tear down the device, due to the applicability of high-energy X-rays to probe in situ degradation.

25 ENERGY STORAGE↗
DOE OSTI2019

Factors and Dynamics of Cu Nanocrystal Reconstruction under CO 2 Reduction

Cu nanocrystals as catalysts for CO 2 reduction are a subject of considerable contemporary interest, but their stability has not been considered as extensively. In this paper, we report on the reconstruction of Cu nanocrystals during CO 2 reduction and discuss the factors influencing the observed changes with computer-based quantitative analysis and spectroscopic techniques. The timelines of opposing phenomena, sintering and declustering, previously reported separately, are detailed with a focus on two forces affecting the final morphology: Applied potential and reaction intermediates. This intriguing system demonstrates the need for fundamental understanding of catalyst behavior preceding the ability to control its performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Potentiodynamics of the Zinc and Proton Storage in Disordered Sodium Vanadate for Aqueous Zn-Ion Batteries

A rechargeable Zn-ion battery is a promising aqueous system, where coinsertion of Zn 2+ and H + could address the obstacles of the sluggish ionic transport in cathode materials imposed by multivalent battery chemistry. However, there is a lack of fundamental understanding of this dual-ion transport, especially the potentiodynamics of the storage process. Here, a quantitative analysis of Zn 2+ and H + transport in a disordered sodium vanadate (NaV 3 O 8 ) cathode material has been reported. Collectively, synchrotron X-ray analysis shows that both Zn 2+ and H + storages follow an intercalation storage mechanism in NaV 3 O 8 and proceed in a sequential manner, where intercalations of 0.26 Zn 2+ followed by 0.24 H + per vanadium atom occur during discharging, while reverse dynamics happens during charging. We find that such a unique and synergistic dual-ion sequential storage favors a high capacity (265 mA h g –1 ) and an energy density (221 W h kg –1 ) based on the NaV 3 O 8 cathode and a great cycling life (a capacity retention of 78% after 2000 cycles) in Zn/NaV 3 O 8 full cells.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Impact of n -Butylammonium Bromide on the Chemical and Electronic Structure of Double-Cation Perovskite Thin Films

2D/3D perovskite heterostructures have emerged as a promising material composition to reduce nonradiative recombination in perovskite-based LEDs and solar cells. Such heterostructures can be created by a surface treatment with large organic cations, for example, n-butylammonium bromide (BABr). To understand the impact of the BABr surface treatment on the double-cation (Cs 0.17 FA 0.83 Pb(I 0.6 Br 0.4 ) 3 ) (FA = formamidinium) perovskite thin film and further optimize the corresponding structures, an in-depth understanding of the chemical and electronic properties of the involved surfaces, interfaces, and bulk is required. We study the impact of the BABr treatment with a combination of surface-sensitive X-ray photoelectron spectroscopy and bulk-sensitive resonant inelastic soft X-ray scattering (RIXS). A quantitative analysis of the BABr-treated perovskite thin film shows a modified chemical perovskite surface environment of carbon, nitrogen, bromine, iodine, and lead, indicating that the treatment leads to a perovskite surface with a modified composition and bonding structure. With K-edge RIXS, the local environment at the nitrogen and carbon atoms is probed, allowing us to identify the presence of BABr in the perovskite bulk albeit with a modified bonding environment. This, in turn, identifies a "hidden parameter" for the optimization of the BABr treatment and overall performance of 2D/3D perovskite solar cell absorbers.

2D/3D perovskite heterostructure↗