A three-fluid model of solar winds
Solar wind model with electrons, protons and alpha particles coupled by electric field and expanding due to pressure gradient and solar gravitation
Yeh, T.↗
SEARCH · Engineering Papers
Results for “pressure gradient”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Crossflow effects on compressible turbulent boundary layer over bodies of revolution
Compressible turbulent boundary layer with adverse pressure gradients and crossflow over revolving bodies, integrating numerically three dimensional compressible integral equations
Calarese, W.↗
Preliminary experimental results from a one- wavelength MHD induction generator
One wavelength MHD induction generator, discussing field pressure gradients, fluid velocities, excitation and electrical output power
Pierson, E. S.↗
Study aids accuracy of turbopump axial thrust analysis
Test program to verify theory used in calculating axial thrust uses turbopump instrumented with /a/ proximity transducers for measuring shaft position, /b/ a strain gage thrust bearing carrier to measure axial thrust, and /c/ internal pressure taps to define component pressure gradients used in thrust calculations.
Nielson, C. E.↗
Near-field characteristics of a high subsonic jet
High subsonic jet near-field acoustic energy flux distribution calculation from pressure gradient measurements
Maestrello, L.↗
Laminar or turbulent boundary-layer flows of perfect gases or reacting gas mixtures in chemical equilibrium
Turbulent boundary layer flows of non-reacting gases are predicted for both interal (nozzle) and external flows. Effects of favorable pressure gradients on two eddy viscosity models were studied in rocket and hypervelocity wind tunnel flows. Nozzle flows of equilibrium air with stagnation temperatures up to 10,000 K were computed. Predictions of equilibrium nitrogen flows through hypervelocity nozzles were compared with experimental data. A slender spherically blunted cone was studied at 70,000 ft altitude and 19,000 ft/sec. in the earth's atmosphere. Comparisons with available experimental data showed good agreement. A computer program was developed and fully documented during this investigation for use by interested individuals.
Anderson, E. C.↗
The pressure and deformation profile between two colliding lubricated cylinders
The pressure and deformation profiles between two colliding lubricated cylinders are obtained by solving the coupled, time-dependent elastohydrodynamic equations with an iterative procedure. The analysis includes effects which were not considered in a previous solution, namely, the effect of the lubricant compressibility and the effect of a lubricant with composite pressure-viscosity coefficients. It is found that the local approach velocity plays an important role during final stages of normal approach. It causes the lubricant to be entrapped within the contact region; neither the pressure nor the deformation profile converges to the Hertzian profile for a dry contact. The use of a smaller pressure-viscosity coefficient at high pressures reduces the sharp pressure gradient at the center of the contact and produces a much milder variation of load with respect to the film thickness. The effect of compressibility of the lubricant is found to be relatively small.
Lee, K.↗
Two phase flow and heat transfer in porous beds under variable body forces, part 2
Analytical and experimental investigations of a pilot model of a channel for the study of two-phase flow under low or zero gravity are presented. The formulation of dimensionless parameters to indicate the relative magnitude of the effects of capillarity, gravity, pressure gradient, viscosity, and inertia is described. The investigation is based on the principal equations of fluid mechanics and thermodynamics. Techniques were investigated by using a laser velocimeter for measuring point velocities of the fluid within the porous material without disturbing the flow.
Evers, J. L.↗
Investigation of rotor blade tip-vortex aerodynamics
Several aspects of the aerodynamics of rotor blade tip vortices are examined. Two particular categories are dealt with; (1) dynamic loads on a blade passing close to or intersecting a trailing vortex, and (2) the response of the trailing vortex core to changes in the flow. Results for both categories are in reasonable agreement with existing data, although lower pressure gradients were obtained than anticipated for category one. A correlation between trailing edge sweep angle at the tip and vortex core size was noted for category two.
Lewellen, W. S.↗
A computer program for the calculation of laminar and turbulent boundary layer flows
The results are presented of a study to produce a computer program to calculate laminar and turbulent boundary layer flows. The program is capable of calculating the following types of flow: (1) incompressible or compressible, (2) two dimensional or axisymmetric, and (3) flows with significant transverse curvature. Also, the program can handle a large variety of boundary conditions, such as blowing or suction, arbitrary temperature distributions and arbitrary wall heat fluxes. The program has been specialized to the calculation of equilibrium air flows and all of the thermodynamic and transport properties used are for air. For the turbulent transport properties, the eddy viscosity approach has been used. Although the eddy viscosity models are semi-empirical, the model employed in the program has corrections for pressure gradients, suction and blowing and compressibility. The basic method of approach is to put the equations of motion into a finite difference form and then solve them by use of a digital computer. The program is written in FORTRAN 4 and requires small amounts of computer time on most scientific machines. For example, most laminar flows can be calculated in less than one minute of machine time, while turbulent flows usually require three or four minutes.
Dwyer, H. A.↗
Dissipation of electric fields in the ionosphere
The heating and movement of the upper atmosphere at ionospheric levels in response to electric currents are discussed. Joule dissipation, generation of winds, and pressure gradients are significant factors in the energetics of the ionospheric electric currents flowing during magnetic storms and also of the Sq current system.
Cole, K. D.↗
Film stability in a vertical rotating tube with a core-gas flow.
The linear hydrodynamic stability of a thin-liquid layer flowing along the inside wall of a vertical tube rotating about its axis in the presence of a core-gas flow is examined. The stability problem is formulated under the conditions that the liquid film is thin, the density and viscosity ratios of gas to liquid are small and the relative (axial) pressure gradient in the gas is of the same order as gravity. The resulting eigenvalue problem is first solved by a perturbation method appropriate to axisymmetric long-wave disturbances. The damped nature (to within the thin-film and other approximations made) of the nonaxisymmetric and short-wave disturbances is noted. In view of the limitations on a truncated perturbation solution when the disturbance wavenumber is not small, an initial value method using digital computer is presented. Stability characteristics of neutral, growing, and damped modes are presented showing the influences of rotation, surface tension, and the core-gas flow. Energy balance in a neutral mode is also illustrated.
Sarma, G. S. R.↗
Origin and early development of the planets.
Extensive numerical calculations have been carried out to determine the structure of the primitive solar nebula. The resulting structure shows a dominance of the radial pressure gradient near the center, and a dominance of the centrifugal forces throughout most of the outer region. Thermal convection and Eddington-Sweet circulation currents can be expected to cause a rapid dissipation of the disk, requiring only a few centuries. It is therefore postulated that the planets were formed in an exceedingly hot initial state due to their rapid rates of accumulation. Beyond one or two astronomical units from the center, the original interstellar grains should not be completely destroyed during the formation of the disk, and these will form the nuclei for subsequent chemical condensations and chemical accumulation. Inside this distance, nucleation of condensed materials must occur within the nebular gases.
Cameron, A. G. W.↗
Surface temperature effect on subsonic stall.
Results of an analytical and experimental study of boundary layer flow over an aerodynamic surface rejecting heat to a cool environment. This occurs following reentry of a Space Shuttle vehicle. Analytical studies revealed that a surface to freestream temperature ratio, greater than unity tended to destabilize the boundary layer, hastening transition and separation. Therefore, heat transfer accentuated the effect of an adverse pressure gradient. Wind tunnel tests of a 0012-64 NACA airfoil showed that the stall angle was significantly reduced while drag tended to increase for freestream temperature ratios up to 2.2.
Macha, J. M.↗
Experimental study of nozzle wall boundary layers at Mach numbers 20 to 47
The nozzle wall boundary layer of an M-50 helium tunnel was investigated with pitot pressure, total temperature, skin friction, and wall heat transfer measurements at five stations and hot wire measurements at two stations. The results indicated that the boundary layer was turbulent with a thick viscous sublayer. Pressure gradients were observed across the boundary layer; the effect of these gradients on the equations of motion are discussed. The direct skin friction measurements were higher than expected from empirical predictions; the Reynolds analogy factors however were lower than expected. Hot wire measurements indicated mass flow fluctuations as large as 80 percent of the local mean mass flow at the edge of the viscous sublayer with a maximum value relative to the edge mass flow of about 15 percent at gamma about equal to 0.8.
Kemp, J. H., Jr.↗
Random response of rectangular panels to the pressure field beneath a turbulent boundary layer in subsonic flows
The response of a rectangular panel under the excitation of a turbulent boundary layer with a zero longitudinal mean pressure gradient in a subsonic flow was studied in detail. The method of normal mode was used together with the technique of spectral analysis. Both simply supported and clamped edge conditions of a panel were considered, and the displacement power spectral density of the panel response was computed. The results for the clamped edge panel compare favorably with existing data. Charts of structural acceptance, which provide a framework for estimating the response of other rectangular panels, are presented, and the physical significances of structural acceptances discussed.
Chyu, W. J.↗
Unsteady turbulent boundary layer analysis
The governing equations for an unsteady turbulent boundary layer on a swept infinite cylinder, composed of a continuity equation, a pair of momentum equations and a pair of turbulent energy equations which include upstream history efforts, are solved numerically. An explicit finite difference analog to the partial differential equations is formulated and developed into a computer program. Calculations were made for a variety of unsteady flows in both two and three dimensions but primarily for two dimensional flow fields in order to first understand some of the fundamental physical aspects of unsteady turbulent boundary layers. Oscillating free stream flows without pressure gradient, oscillating retarded free stream flows and monotonically time-varying flows have all been studied for a wide frequency range. It was found that to the lowest frequency considered, the lower frequency bound being determined by economic considerations (machine time), there were significant unsteady effects on the turbulent boundary layer.
Singleton, R. E.↗
A method for calculating aerodynamic heating on sounding rocket tangent ogive noses
A method is presented for calculating the aerodynamic heating and shear stresses at the wall for tangent ogive noses that are slender enough to maintain an attached nose shock through that portion of flight during which heat transfer from the boundary layer to the wall is significant. The lower entropy of the attached nose shock combined with the inclusion of the streamwise pressure gradient yields a reasonable estimate of the actual flow conditions. Both laminar and turbulent boundary layers are examined and an approximation of the effects of (up to) moderate angles-of-attack is included in the analysis. The analytical method has been programmed in FORTRAN 4 for an IBM 360/91 computer.
Wing, L. D.↗