Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “potential yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

On alert for Ebola: public health risk assessment of travellers from Uganda to the USA during the 2022 outbreak

Abstract Background On 20 September 2022, the Ugandan Ministry of Health declared an outbreak of Ebola disease caused by Sudan ebolavirus. Methods From 6 October 2022 to 10 January 2023, Centers for Disease Control and Prevention (CDC) staff conducted public health assessments at five US ports of entry for travellers identified as having been in Uganda in the past 21 days. CDC also recommended that state, local and territorial health departments (‘health departments’) conduct post-arrival monitoring of these travellers. CDC provided traveller contact information, daily to 58 health departments, and collected health department data regarding monitoring outcomes. Results Among 11 583 travellers screened, 132 (1%) required additional assessment due to potential exposures or symptoms of concern. Fifty-three (91%) health departments reported receiving traveller data from CDC for 10 114 (87%) travellers, of whom 8499 (84%) were contacted for monitoring, 1547 (15%) could not be contacted and 68 (1%) had no reported outcomes. No travellers with high-risk exposures or Ebola disease were identified. Conclusion Entry risk assessment and post-arrival monitoring of travellers are resource-intensive activities that had low demonstrated yield during this and previous outbreaks. The efficiency of future responses could be improved by incorporating an assessment of risk of importation of disease, accounting for individual travellers’ potential for exposure, and expanded use of methods that reduce burden to federal agencies, health departments, and travellers.

General & Internal Medicine↗
DOE OSTI2021

Evaluating causal‐based feature selection for fuel property prediction models

Abstract In‐silico screening of novel biofuel molecules based on chemical and fuel properties is a critical first step in the biofuel evaluation process due to the significant volumes of samples required for experimental testing, the destructive nature of engine tests, and the costs associated with bench‐scale synthesis of novel fuels. Predictive models are limited by training sets of few existing measurements, often containing similar classes of molecules that represent just a subset of the potential molecular fuel space. Software tools can be used to generate every possible molecular descriptor for use as input features, but most of these features are largely irrelevant and training models on datasets with higher dimensionality than size tends to yield poor predictive performance. Feature selection has been shown to improve machine learning models, but correlation‐based feature selection fails to provide scientific insight into the underlying mechanisms that determine structure–property relationships. The implementation of causal discovery in feature selection could potentially inform the biofuel design process while also improving model prediction accuracy and robustness to new data. In this study, we investigate the benefits causal‐based feature selection might have on both model performance and identification of key molecular substructures. We found that causal‐based feature selection performed on par with alternative filtration methods, and that a structural causal model provides valuable scientific insights into the relationships between molecular substructures and fuel properties.

Nguyen, Bernard↗
DOE OSTI2026

Measurements of Radical Reactivity with an Imine, (CF 3 ) 2 CNH: Rate Constants for Chlorine Atoms and Hydroxyl Radicals and the Global Warming Potential

The rate constant kOH for the reaction of 1,1,1,3,3,3-hexafluoroprop-2-imine with OH radicals was measured relative to two reference compounds, CH 3 F and CH 3 CHF 2 , to be k OH = (4.2 ± 1.1) × 10 −14 cm 3 molecule −1 s −1 at 295 K. This implies an atmospheric lifetime with respect to consumption by OH of 0.75 years. Reaction with Cl atoms yielded k Cl = (7.9 ± 1.7) × 10 −16 cm 3 molecule −1 s −1 at 295 K, and reaction with O 3 has an upper limit of k O3 < 4 × 10 −23 cm 3 molecule −1 s −1 , so that the atmospheric consumption by Cl and O 3 is negligibly slow. Absolute infrared cross sections of the imine yield a radiative efficiency of 0.34 W m −2 ppb −1 , which is corrected to 0.23 W m −2 ppb −1 for the effects of atmospheric lifetime. The imine’s corresponding 100-year global warming potential is 64 ± 19. This value is an upper limit, given that heterogenous atmospheric removal paths, such as hydrolysis in water droplets, are not included.

climate metric↗
DOE OSTI2025

Large-scale experimental validation of thermochemical water-splitting oxides discovered by defect graph neural networks

Thermochemical water-splitting (TCH) based on 2-step thermal redox cycles in metal oxides is a promising approach to generating H 2 , but state-of-the-art (SOTA) CeO 2 has several practical limitations, which has motivated continued materials discovery efforts in this field. Here, in this study, we improve upon a SOTA defect graph neural network (dGNN) surrogate model's oxygen vacancy predictions and combine them with materials project phase diagrams to down-select and discover structurally diverse, experimentally known metal oxides whose TCH performance was previously unknown. Amongst twelve candidates selected based on our high-throughput screening and down-selection criteria, we achieved ∼80% accuracy in identifying materials with stable redox cycling and hydrogen production in stagnation flow reactor water-splitting experiments. Closer to 100% accuracy can be achieved if higher-accuracy, hybrid DFT-predicted vacancy formation energies were computed and used in lieu of the most uncertain dGNN-based screening predictions, as they correct false positives to true negatives. Notably, two discovered candidates, Sr 3 PrMn 2 O 8 and Ba 2 Fe 2 O 5 , display hydrogen yields greater than CeO 2 under specific redox conditions. In conclusion, these results demonstrate our ability to computationally predict and experimentally validate promising candidate TCH materials that have the potential to compete with CeO 2 .

08 HYDROGEN↗
DOE OSTI2023

R –8 Dispersion Interaction: Derivation and Application to the Effective Fragment Potential Method

The anisotropic and isotropic R –8 dispersion contributions (disp8) are derived and implemented within the framework of the effective fragment potential (EFP) method formulated with imaginary frequency-dependent Cartesian polarizability tensors distributed at the centroids of the localized molecular orbitals (LMOs). Two forms of damping functions, intermolecular overlap-based and Tang–Toennies, are extended for disp8. To obtain LMO polarizability tensors centered at LMO centroids, an origin-shifting transformation is derived and implemented for the dipole–octopole polarizability tensor and the quadrupole–quadrupole polarizability tensor. The analytic gradient is derived and implemented for the isotropic disp8 contribution. Relative to the previously implemented empirical EFP disp8 energy, the isotropic disp8 component of the interaction energy improves the overall agreement of the EFP dispersion energies with the symmetry-adapted perturbation theory (SAPT) benchmarks, reducing the mean absolute errors (MAEs) and mean absolute percentage errors for most of the databases examined in this work. Further, while the anisotropic disp8 can further enhance the accuracy of the EFP dispersion energy and yield smaller MAEs, significantly overbound dispersion energies are predicted by the anisotropic disp8 when the maximum element in the intermolecular overlap matrix is greater than 0.1, possibly due to the breakdown of the approximations made in the EFP dispersion derivation at a short range. For potential energy scan databases, the newly developed EFP dispersion model with isotropic disp8 yields the overall correct curvature and good agreement with SAPT benchmarks around equilibrium and longer but overestimates the dispersion interactions at a short range. While the overlap-based dispersion-damping functions produce better MAEs than Tang–Toennies damping functions, further improvement is needed to better screen the large attractive dispersion energies at a short range (overlap >0.1).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hydroxyl radical yields in the heavy ion radiolysis of water

The yields of hydroxyl radicals in the radiolysis of water with protons and carbon ions have been examined using experimental scavenging techniques coupled with Monte Carlo track simulations. Combined with previous results using helium ions, this set of data gives valuable information on the potential for radiation induced damage to biological systems for light ions with very different track structures. Carbon dioxide production from aerated formic acid solutions in concentrations ranging from 10 -3 to 1 M was used as a probe of hydroxyl radical yields from about 8 ns to 8 µs. Numerical interpolation of the results at slightly different ion energies in combination with data from gamma radiolysis allows for a systematic analysis of both track average and track segment yields. As expected, considerable track chemistry is found to occur on the nanosecond to microsecond time scales. Monte Carlo track simulations employing stochastic diffusion-kinetic calculations of product yields are found to reproduce experimental observations satisfactorily. The track simulations are used to extract hydroxyl radical kinetics in pure water at neutral conditions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Converting Carbon Dioxide into Carbon Nanotubes by Reacting with Ethane

In this study, the urgency to mitigate environmental impacts from anthropogenic CO 2 emissions has propelled extensive research efforts on CO 2 reduction. The current work reports a novel approach involving transforming CO 2 and ethane into carbon nanotubes (CNTs) using earth-abundant metals (Fe, Co, Ni) at 750 °C. This route facilitates long-term carbon storage via generating high-value CNTs and produces valuable syngas with adjustable H 2 /CO ratios as byproducts. Without CO 2 , direct pyrolysis of ethane undergoes rapid deactivation. The participation of CO 2 not only enhances the durability of the catalyst, but also contributes about 30 % of the CNTs production, presenting a viable solution to CO 2 challenges. The CNT morphology depends on the catalyst used. Co- and Ni-based catalysts produce CNT with a 20 nm diameter and micrometer length, whereas Fe-based catalysts yield bamboo-like structures. This work represents a pioneering effort in utilizing CO 2 and ethane for CNT production with potential environmental and economic benefits.

09 BIOMASS FUELS↗
DOE OSTI2026

Harnessing plant‐based platform for low‐cost cellulosic sugar recovery from bioenergy crops

The price of pure cellulase enzyme for the recovery of fermentable cellulosic sugars is one of the major challenges that limit the commercialization of second-generation biofuels and bio-based products. This work shows a means to greatly reduce the cost of cellulases. The abundant capacity of plants to synthesize and hyperaccumulate transgenic proteins in their plastids has been demonstrated for two gene constructs using either NPT II or Tet C to regulate the expression of bacterial cellulase Cel6A. Previously, the expression of Cel6A to 20–35% of total soluble leaf protein in tobacco was shown in two consecutive field trials. Moving forward, the key challenge was the extraction of active enzymes from the transgenic tobacco leaves hyperaccumulating bacterial cellulases in a cost-effective manner. The study showed that unpurified crude extracts of NPT II and Tet C transgenic tobacco leaves recovered ~23% and ~29% w/w cellulosic sugars from energycane bagasse, respectively. A supplementation of as low as 25% of purified commercial cellulase improved the glucose recovery by 2.9 times (~85% w/w) compared to 100% crude extract, which is comparable to the glucose recovery obtained by commercial cellulases, thereby suggesting a reduced requirement of commercial cellulases leading to a cost reduction of 75% for biorefineries. Assuming a stable 40% cellulase yield in total soluble protein under field conditions and multiple harvests (one to three) a year, the study estimates that the potential cost for saccharification of 1 t of lignocellulosic biomass can be reduced to 67–200 USD by using crude leaf extracts of transgenic tobacco.

biofuel↗
DOE OSTI2024

Microwave-Mediated ammonia synthesis over Co 2 Mo 3 N catalysts at low pressures

The Haber-Bosch process for ammonia (NH 3 ) synthesis is a major contributor to greenhouse gas emissions and is responsible for > 2 % of the world’s energy consumption each year encouraging the need for alternative renewable-based options. Here, this study investigates an earth-abundant ternary metal nitride (i.e., Co 2 Mo 3 N) catalyst to develop a renewable-based NH 3 synthesis approach, utilizing an energy-efficient microwave-assisted route. Using a combination of spectroscopic and catalytic measurements coupled with surface analysis techniques, Co 2 Mo 3 N was evaluated as a stable and efficient NH 3 synthesis catalyst. Results presented here demonstrate NH 3 synthesis on Co 2 Mo 3 N at ~420 °C and ambient pressure yield ~0.7 mmolNH3.g cat -1 .h -1 and up to ~12 mmol NH3 .g cat -1 .h -1 at 28 bar under microwave irradiation. Co 2 Mo 3 N displayed an activation energy of ~72 kJ.mol -1 and yielded NH 3 following first-order kinetics with respect to both H 2 and N 2 . These studies illustrate the potential of using this catalyst for a sustainable, cost-effective, and environmentally friendly approach to producing NH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thermal and mechanical performance of gypsum composites containing fly ash cenosphere encapsulated phase change materials

Utilizing phase change materials (PCMs) within construction materials improves the thermal energy storage capabilities in the built environment. Notably, integrating PCMs into drywalls presents a promising avenue to reduce building energy use. However, incorporating PCMs into drywalls poses challenges, particularly reduced mechanical properties and workability limitations as it can adversely affect the hardening and cohesiveness of gypsum composites. To address these challenges, this study explores a novel strategy to incorporate PCMs into gypsum composites through fly ash cenosphere-encapsulated PCM, namely CenoPCM, aiming to enhance the mechanical properties and thermal conductivity over existing commercial counterparts. An experimental program was conducted to study the impact of the inclusion of CenoPCM on the mechanical and thermal performance of gypsum composites, and the results were compared to those of commercially available polymerencapsulated PCM benchmark (Micronal). The findings highlighted that PCM-charged samples exhibited up to 95.90 J/g (CenoPCM) of latent heat with 70 % CenoPCM loading. The results of mechanical tests also showed that CenoPCM outperformed its polymer-encapsulated counterpart, achieving 55 % higher mechanical strength on average. Here, this improvement is attributed to the rigid shell of fly ash cenosphere (FAC) serving as a PCM carrier, providing a skeleton-like structure to gypsum composites for higher load-bearing capacity. Additionally, hotbox tests demonstrated that the CenoPCM-charged wall panels yielded a 20 % higher thermal conductivity and a 22 % increased time lag compared to Micronal PCM-charged panels, indicating its potential to shift the peak load in buildings.

Ceno PCM↗
DOE OSTI2022

Model-based predictive control of multi-zone commercial building with a lumped building modelling approach

Here this study investigates the applicability of a lumped building modeling approach to model-based predictive control (MPC) to alleviate the complex modeling process of the grey-box multi-zone building model. Based on experimental data, two building models were estimated in this study. The detailed model as a reference case and a lumped model were estimated with decentralized and conventional approaches, respectively. Then, simulations were performed with two boundary conditions, including the comfort bound and electricity cost structure. The performances of the MPC with the detailed and lumped models were analyzed compared to the feedback control. More savings was achieved with a larger comfort bound and more aggressive electricity cost structure. The savings potential of the proposed lumped model approach was not as high as that of the detailed model. However, the proposed method yields good control performance, whose savings was approximately 8.6% over that of feedback control. These results suggest that the proposed method can be used to facilitate MPC implementation in multi-zone building applications.

42 ENGINEERING↗
DOE OSTI2024

Microjet printing of metal salt or oxide targets for nuclear reaction studies on radionuclides

Radioactive targets for direct measurements of neutron-induced reactions are required to improve evaluated cross-section data and, ultimately, the fidelity of neutron reaction network simulations. Electrodeposition and molecular plating are the current state-of-the-art radioactive target production techniques, but not all metals can be electrodeposited or molecular plated with high yields. Alternative techniques can be expensive or may produce targets that are unsatisfactory in terms of thickness, yield, or purity. Microjet printing is a new, rather inexpensive technique that utilizes equipment with a small footprint and has the potential to produce thin, highly radioactive targets with good uniformity and minimal impurities from the target fabrication process. This study involved optimizing the process of producing microjet printed targets to allow for the fabrication of a stable vanadium(V) oxide (V 2 O 5 ) target that was compared with an analogous electrodeposition V 2 O 5 target manufactured via the application of a vanadium chemical conversion coating on aluminum (Al) foil. Finally, the results from these studies suggest microjet printing could be used to produce relatively uniform target layers with adequate film thicknesses (< 15 μm). V 2 O 5 microjet printed targets, when compared with chemical conversion coating V 2 O 5 targets, appeared to be qualitatively less uniform and quantitatively larger in thickness (11.7(27) μm vs. 5.3(18) μm). However, the conversion coating target contained more impurities and the Al backing had a higher background contribution to measurements of neutron-induced reactions as opposed to targets produced via microjet printing. Overall, the results from this study suggest microjet printing has the capability to be an excellent alternative target production technique to the electrodeposition and molecular plating methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

The Influence of Residual Copper Catalyst on the Polymer-to-Ceramic Conversion of a Click-Derived Polycarbosilane

Preceramic polymers (PCPs) are a key class of materials for the preparation of advanced ceramic components. Following conventional polymer processing and subsequent pyrolysis, polymer-derived ceramic (PDC) fibers, monoliths, and composites offer novel engineering opportunities for aerospace applications. Despite the rapidly emerging commercial applications of PDCs, many basic scientific questions remain regarding the structural transformation of the polymer to the final ceramic and how processing variables affect PDC materials properties. PCPs prepared using a mild and scalable copper (Cu) catalyzed azide/alkyne “click” reaction have been demonstrated as a unique class of material that can bind with transition metals, ultimately producing ultrahigh temperature ceramics (UHTCs) upon pyrolysis. Unexpectedly, it was found that the removal of residual Cu catalyst from a model click-derived polycarbosilane PCP significantly reduced the ceramic yield during pyrolysis. Herein, we report the influence of Cu impurities on polycarbosilane-derived SiC ceramics and present a mechanistic understanding of the unintended role of Cu in the polymer-to-ceramic conversion process. Synchrotron-based scattering and spectroscopy methods were implemented to track the evolution of different atomic species and local structures as well as the influence of Cu toward atomic-scale structures in the final ceramics. It was determined that Cu impurities catalyze the formation of silicon carbide through the formation of an intermediate molten copper/copper silicide, ultimately increasing the ceramic yield. Overall, this contribution highlights the need to carefully assess the interplay between the chemistries needed for PCP synthesis and their potential influence on final PDCs following processing.

Ponder, Jr., James F. [Air Force Research Laborato↗
DOE OSTI2020

Auger Recombination Lifetime Scaling for Type I and Quasi-Type II Core/Shell Quantum Dots

Having already achieved near-unity quantum yields, with promising properties for light-emitting diode, lasing, and charge separation applications, colloidal core/shell quantum dots have great technological potential. The shell thickness and band alignment of the shell and core materials are known to influence the efficiency of these devices. In many such applications, improving the efficiency requires a deep understanding of multiexcitonic states. In this paper, we elucidate the shell thickness and band alignment dependencies of the biexciton Auger recombination lifetime for quasi-type II CdSe/CdS and type I CdSe/ZnS core/shell quantum dots. We find that the biexciton Auger recombination lifetime increases with the total nanocrystal volume for quasi-type II CdSe/CdS core/shell quantum dots and is independent of the shell thickness for type I CdSe/ZnS core/shell quantum dots. To perform these calculations and compute Auger recombination lifetimes, we developed a low-scaling approach based on the stochastic resolution of identity. The numerical approach provided a framework for studying the scaling of the biexciton Auger recombination lifetimes in terms of the shell thickness dependencies of the exciton radii, Coulomb couplings, and density of final states in quasi-type II CdSe/CdS and type I CdSe/ZnS core/shell quantum dots.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Emergent Behavior at the Calcite–Water Interface during Reactive Transport in a Simple Microfluidic Channel

Geochemical reactive transport processes in natural mineral-fluid systems may produce a wide array of emergent phenomena that are difficult to predict from basic principles and to reproduce in model systems. In this study, we present experimental results obtained from a simple microfluidic system with which we explored the consequences of reacting the calcite (104) cleavage surface with an acidic Pb-bearing solution (pH = 3.5, [Pb] total = 5 mM) as a function of flow rate. This system is relevant to passive remediation systems for Pb-rich acid mine drainage. We observed periodic banding in the amounts of Pb sorption at flow velocities ≥ 926 μm s -1 , where the band spacing was spatially correlated with the amount of calcite dissolution and the development of micropyramidal topography on the calcite (104) surface. The equivalent coverage of Pb deposited in these Pb-rich bands was at least several monolayers per unit cell, yet there was no evidence for precipitation of any secondary Pb phase implying incorporation of Pb within the near-surface calcite lattice. We also observed spatial variations in nucleation and growth of euhedral secondary Pb-carbonate minerals hydrocerusite and cerussite at flow rates ≤ 278 μm s -1 ,. These findings demonstrate potential for exploiting the rich phenomenology afforded by the interplay among transport phenomena and chemical kinetics in experimental systems designed to yield deeper insights into geochemical self-organization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Recent Increasing Trend in October–November Caribbean Tropical Cyclone Activity

October–November Caribbean tropical cyclone (TC) activity has significant impacts for both the Caribbean islands and Central America (e.g., Hurricanes Eta and Iota in 2020). October–November Caribbean TCs can also track northward and make continental United States landfall, resulting in substantial damage and fatalities (e.g., Hurricane Michael in 2018 and Delta and Zeta in 2020). We find significant increasing trends in October–November Caribbean hurricanes, rapidly intensifying hurricanes (winds increasing by ≥15 m s −1 within 24 hr), and landfalling hurricanes during the global satellite era (1979–present). Since 1979, we also observe significant warming trends in the western Atlantic Warm Pool and anomalous relative cooling in the eastern Pacific during October–November. These trends yield a more conducive dynamic and thermodynamic environment for Caribbean TCs, including reductions in Caribbean vertical wind shear, increases in Caribbean potential intensity, and a more TC-conducive African easterly jet.

Klotzbach, P. J. [Colorado State Univ., Fort Colli↗
DOE OSTI2023

Multipurpose active scanning probe cantilevers for near-field spectroscopy, scanning tunnel imaging, and atomic-resolution lithography

In this work, we report progress on developing a multipurpose scanning probe cantilever applying gallium nitride nanowires as the probe tip. Gallium nitride nanowires possess high potential as probes due to their straight profile, tunable electrical and optical properties, high Young’s Modulus, durability, and high-yield fabrication process. Their wide bandgap enables them to be pumped to emit ultraviolet pulses which can be used for optical imaging and spectroscopy. They can be doped during growth to be electrically conductive, and their sharp tips obtained during epitaxial growth enable confinement of a high electric field at tip–sample interface. Their sharp tips are obtained during fabrication by their epitaxial growth which eliminates the need for postprocess sharpening that is typically required for standard STM tips. We present results of using gallium nitride nanowires for scanning tunnel microscopy applications of atomic-resolution imaging and lithography, and atomic force microscopy applications of imaging and lithography in vacuum and atmospheric environments.

Engineering↗
DOE OSTI2020

U.S. Department of Energy Free-Air CO 2 Enrichment Experiments: FACE Results, Lessons, and Legacy

In the 1970s, growing concern about potential long-range consequences of carbon dioxide (CO 2 ) emissions from the combustion of fossil fuels prompted the U.S. Department of Energy (DOE) to begin developing a CO 2 research program. The goal was to obtain the scientific information needed to reduce uncertainty and develop a knowledgebase for decision-making. At its start in 1980, this program had three components: the global carbon cycle, climate effects, and vegetation effects. The vegetation effects component recognized that increased atmospheric CO 2 could be a potential benefit to vegetation and crops because CO 2 is an essential resource for plant growth. In addition to increasing crop yield, program developers and researchers recognized that this fertilizer effect could also result in greater storage of fossil fuel CO 2 by forests. Initial experiments were small in scale and scope and focused on the photosynthesis, physiology, and water use of crop plants, but the focus shifted toward responses of plants in natural systems, as needed for connections to the global carbon cycle. Program research investigated CO 2 interactions with other environmental variables, emphasizing field research whenever possible and recognizing that exposure to elevated CO 2 concentrations under realistic field conditions should lead to better predictions of plant response. Whole-ecosystem field experiments were instituted in low-stature ecosystems, but experiments to address forest responses necessarily relied on tree seedlings or saplings in open-top chambers (OTCs) and not within intact forest ecosystems. The need for larger-scale, longer-duration experiments in each of the world’s six major biomes (tundra, boreal forest, temperate forest, tropical forest, grassland, and desert) became clear, and for these experiments, free-air CO 2 exposure facilities were necessary. This report summarizes the objectives and main results of DOE-sponsored experiments employing such facilities, along with the outcomes from research on ecosystem responses using field chambers (see Fig. ES.1, p. x). Additionally, this report highlights the many successes of DOE CO 2 enrichment studies and considers the lessons learned that can be used to guide future initiatives.

54 ENVIRONMENTAL SCIENCES↗