Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Integration of Thermoelectric Generator and Wireless Sensor Node Simulators

This report focuses on integrating TEG and WSN simulators with DC-DC converter as an interface. Here DC stands for direct current. DC-DC converter is essential to balance a wide range of analog, digital, and radio loads acting on the energy source. Also, the voltage level generated by TEGs under varying temperature conditions could be low, irregular, and insufficient to operate WSN, therefore DC-DC is required to boost up the voltage to a desired level. Most of the main problems of DC-DC converters used in TEG system are related to impedance matching between the internal resistance of TEG and the input resistance of DC-DC converter. This report would address the issue associated with dynamic impedance matching under varying temperature conditions in the effort to integrate TEG and WSN. In this effort, dynamic impedance matching algorithms like perturb and observe (P&O) and extremum seeking control (ESC) algorithms will de implemented and compared to achieve maximum peak power tracking (MPPT). In addition, the report will summarize the experimental study performed at BSU on profiling behavior of WSN prototype.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Evaluate the role of organic acids in the protection of ligands from radiolytic degradation

In the Advanced TALSPEAK process, the bis(2-ethylhexyl)phosphoric acid (HDEHP) extractant used in the traditional TALSPEAK process is replaced by the extractant 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]). In addition, the aqueous phase complexant and buffer used in traditional TALSPEAK is replaced with the combination of N-(2-hydroxyethyl)ethylenediamine-N,N’,N’-triacetic acid (HEDTA) and citric acid. In order to evaluate the possible impacts of gamma radiolysis upon the efficacy of the Advanced TALSPEAK flowsheet, aqueous and organic phases corresponding to the extraction section of the proposed flowsheet were irradiated in the INL test loop under an ambient atmosphere. The results of these studies conducted at INL, led INL researchers to conclude that the scarcity of values of rate constants for the reaction of hydroxyl radical with the components of the Advanced TALSPEAK process chemistry was severely limiting the interpretation of the results of radiolysis studies performed at the INL. In this work, the rate of reaction of hydroxyl radical with citric acid at several pH values was measured using a competitive pulse radiolysis technique. This report describes those results and is written in completion of milestone M3FT-16IN030102028, the goal of which was to evaluate the role of organic acids in the protection of ligands from radiolytic degradation. The results reported here demonstrate the importance of obtaining hydroxyl radical reaction rate data for the conditions that closely resemble actual solution conditions expected to be used in an actual solvent extraction process. This report describes those results and is written in completion of milestone M3FT-16IN030102028, the goal of which was to evaluate the role of organic acids in the protection of ligands from radiolytic degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Validation of Tendril TrueHome Using Software-to-Software Comparison

This study performed comparative evaluation of EnergyPlus version 8.6 and Tendril TrueHome, two physics-based home energy simulation models, to identify differences in energy consumption predictions between the two programs and resolve discrepancies between them. EnergyPlus is considered a benchmark, best-in-class software tool for building energy simulation. This exercise sought to improve both software tools through additional evaluation/scrutiny.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Final Report on Update and Enhancement of Shale Gas Outlooks

The study performed by an interdisciplinary team of the Bureau of Economic Geology (Jackson School of Geosciences, The University of Texas at Austin) presents an improved production outlook assessments for the major U.S. shale gas plays, including the Barnett, Fayetteville, Haynesville, and Marcellus. The team of geoscientists, engineers, statisticians, and economists has reviewed and analyzed developments in the understanding of geologic, production-technology, and economic factors and has developed a model to run various scenarios with respect to energy prices, costs, technological advances, changes in geologic attributes, and physical and regulatory constraints.

03 NATURAL GAS↗

Determine rate of reaction of hydroxyl radical with carboxylic acids and polyaminocarboxylates

In the Advanced TALSPEAK process, the bis(2-ethylhexyl)phosphoric acid (HDEHP) extractant used in the traditional TALSPEAK process is replaced by the extractant 2-ethylhexylphosphonic acid mono-2- ethylhexyl ester (HEH[EHP]). In addition, the aqueous phase complexant and buffer used in traditional TALSPEAK is replaced with the combination of N-(2-hydroxyethyl)ethylenediamine-N,N’,N’-triacetic acid (HEDTA) and citric acid. In order to evaluate the possible impacts of gamma radiolysis upon the efficacy of the Advanced TALSPEAK flowsheet, aqueous and organic phases corresponding to the extraction section of the proposed flowsheet were irradiated in the INL test loop under an ambient atmosphere. The results of these studies conducted at INL, led INL researchers to conclude that the scarcity of values of rate constants for the reaction of hydroxyl radical with the components of the Advanced TALSPEAK process chemistry was severely limiting the interpretation of the results of radiolysis studies performed at the INL. In this work, the rate of reaction of hydroxyl radical with citric acid at several pH and HEDTA at several pH values was measured using a competitive pulse radiolysis technique. The results reported here demonstrate the importance of obtaining hydroxyl radical reaction rate data for the conditions that closely resemble actual solution conditions expected to be used in an actual solvent extraction process. This report describes those results and is written in completion of milestone M3FT-17IN030102014.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Final Report: SECA Core Technology Program - PNNL

This report summarizes results from experimental and modeling studies performed by researchers at Pacific Northwest National Laboratory on behalf of the Solid-State Energy Conversion Alliance (SECA) Core Technology Program. The work was performed from 1999 through 2014, under FWP 40552. PNNL’s scientific and technical contributions included development/evaluation of improved materials and fabrication processes for solid oxide fuel cell (SOFC) components, development/implementation of modeling tools to facilitate cell and stack design and optimization, and improved understanding/mitigation of SOFC performance degradation mechanisms. Primary areas of contribution were 1) Materials and fabrication processes, 2) Modeling and simulation tools, 3) Understanding of degradation mechanisms, and 4) New test protocols. The report contains brief descriptions of primary scientific and technical achievements; references to detailed descriptions of the work (patents, papers, and reports) are also provided.

30 DIRECT ENERGY CONVERSION↗

Noise Study for the Mexican Spotted Owl Sandia-Mortandad Area of Environmental Interest

One of the primary threats to Mexican Spotted Owls at the Los Alamos National Laboratory (LANL) is noise disturbance during the nesting season from vehicular traffic, construction activities, and explosives testing. The other primary threat is from habitat loss or alteration. Sigma Mesa is located between Sandia Canyon to the north and Mortandad Canyon to the south, and is within Technical Area 60. Since Sigma Mesa is within an Area of Environmental Interest (AEI) for the Mexican Spotted Owl, any increase in operational activities requires evaluation under the LANL Habitat Management Plan. This study was completed to support a biological assessment to analyze the effects of the installation of a new asphalt batch plant and additional vehicular traffic on Sigma Mesa. We conducted noise monitoring using calibrated noise level meters at various locations around the project site. This included daytime, nighttime, and weekend measurements. The noise cycle levels around Sigma Mesa vary throughout the week and by measurement location. In developed areas, current noise levels were significantly higher during the day due to daytime operations. In undeveloped areas, noise levels were significantly higher at night due to natural noise primarily from insects. Weekend noise was significantly lower in developed areas and was not significantly different in undeveloped areas. Weekday operations are reduced during the weekend resulting in less noise. Since most of the operational noise is attenuated during the week, noise levels in undeveloped areas are not significantly different during the weekend. In comparison to a noise study performed in 2005 in the same general area, current noise levels have increased in developed areas around Sigma Mesa, but have not increased in undeveloped areas that are lower in elevation. This is due to natural noise attenuation over distance and elevation gradients.

54 ENVIRONMENTAL SCIENCES↗

Noise Study for the Mexican Spotted Owl Sandia-Mortandad Area of Environmental Interest

One of the primary threats to Mexican Spotted Owls at the Los Alamos National Laboratory (LANL) is noise disturbance during the nesting season from vehicular traffic, construction activities, and explosives testing. The other primary threat is from habitat loss or alteration. Sigma Mesa is located between Sandia Canyon to the north and Mortandad Canyon to the south, and is within Technical Area 60. Since Sigma Mesa is within an Area of Environmental Interest (AEI) for the Mexican Spotted Owl, any increase in operational activities requires evaluation under the LANL Habitat Management Plan. This study was completed to support a biological assessment to analyze the effects of the installation of a new asphalt batch plant and additional vehicular traffic on Sigma Mesa. We conducted noise monitoring using calibrated noise level meters at various locations around the project site. This included daytime, nighttime, and weekend measurements. The noise cycle levels around Sigma Mesa vary throughout the week and by measurement location. In developed areas, current noise levels were significantly higher during the day due to daytime operations. In undeveloped areas, noise levels were significantly higher at night due to natural noise primarily from insects. Weekend noise was significantly lower in developed areas and was not significantly different in undeveloped areas. Weekday operations are reduced during the weekend resulting in less noise. Since most of the operational noise is attenuated during the week, noise levels in undeveloped areas are not significantly different during the weekend. In comparison to a noise study performed in 2005 in the same general area, current noise levels have increased in developed areas around Sigma Mesa, but have not increased in undeveloped areas that are lower in elevation. This is due to natural noise attenuation over distance and elevation gradients.

54 ENVIRONMENTAL SCIENCES↗

Progress Report on the Investigation of Separable Floating Layers in Hanford Double-Shell Tank Supernates

A review of studies performed the last four years at 222-S Laboratory on separable floating solids including demonstration of the formation of a floating layer in the organic-bound simulated solids and investigation of floating solids found in AN-101 and AW-104 as well as carbonate precipitation floating on the surface of AN-107 grab samples. Demonstrated that semivolatile organic analysis can detect separable organics including tributyl phosphate, degradation products of Quintolubric hydraulic fluid, and hydrocarbon as tentatively identified compounds. In addition, an evaluation of the relationship of small organic acids to the total organic carbon is discussed in selected double-shell tank supernate. A systematic approach is presented to monitor separable organics and insoluble particulates in the double-shell tank waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Wide Band Gap Chalcopyrite Photoelectrodes for Direct Water Splitting (Final Technical Report)

The chalcopyrite material class, typically identified by its most popular alloy CuInGaSe 2 , provides exceptionally good candidates for photoelectrochemical (PEC) water splitting and has the potential to meet DoE EERE’s targets in terms of hydrogen production costs (less than $2/gge). Some key advantages of this class include remarkable photon-to-electron conversion efficiency and a high Faradaic efficiency for the hydrogen evolution reaction, two characteristics essential for efficient PEC water splitting. However, the band gaps of commonly used chalcopyrites in the photovoltaic field (1.0-1.6 eV) are too narrow to be compatible with the multi-junction approach for efficient PEC hydrogen production, in which a stack of solar absorbers generates the bias required for water splitting. Nonetheless, previous studies performed by our team demonstrated that chalcopyrites’ narrow band gaps could be effectively widened using simple conversion steps, leading to functional chalcopyrite-based PEC electrodes with optical band gap in the 1.8-2.4 eV range, making this class highly suitable for renewable hydrogen production via water splitting. This multi-disciplinary research program lead by the University of Hawai’i/Hawai’i Natural Energy Institute combined unique analytical techniques (UNLV), state-of-the-art theoretical modeling (LLNL) with advanced thin film materials synthesis (HNEI, NREL and Stanford) to provide deeper understanding of wide band gap chalcopyrite-based PEC materials and engineer high performance/corrosion-resistant photocathodes with tunable energetics and compatible with the multi-junction approach. The goals of this project were to demonstrate photoelectrochemical (PEC) solar-hydrogen production using a dual absorber system with a solar-to-hydrogen conversion efficiency of at least 15% with an operational life up to 2,000 hours and capable of generating at least 3 liters of hydrogen in 8 hours. After a brief introduction (Section 1) and description of our work plan (Section 2), we present in Section 3 our results on the development of new wide bandgap copper chalcopyrites absorbers for PEC waters splitting. We first show through modeling how alloying can be used to tailor the optical properties and/or surface energetics of various material candidates. We also present how specific defects (e.g., GaCu) can lead to recombination centers within the forbidden gap of copper-poor chalcopyrites. Then, we present our efforts to synthesize high efficiency wide band gap CuGa 3 Se 5 , CuGa(S,Se) 2 and Cu(In,Ga)S 2 photocathodes capable of generating photocurrent density over 10 mA/cm 2 . We also demonstrate that Cu-rich absorbers should be avoided as they lead to poor sub-band gap optical transmission. In Section 4, we first report on our efforts to tune the energetics of chalcopyrites toward the hydrogen evolution reaction. First, we quantified the energetics of wide band gap chalcopyrites interfaced with conventional CdS buffer layer, as measured with X-ray photoelectron spectroscopy techniques, and evidence the presence of a large (and undesirable) conduction band offset at this interface. Then, we highlight some of the work performed with alternative buffer layers, including In 2 S 3 . Durability improvements with various ultra-thin protective layers are presented in Section 5. Our data show that TiO 2 combined with MoS 2 can significantly improve chalcopyrites lifetime up to 350 hours under continuous operation at 8 mA/cm 2 . Finally, in Section 6 we report strategies to integrate chalcopyrite photocathodes into standalone tandem PEC devices. Although promising methods were proposed for both mechanical and monolithic stacking with narrow band gap PV drivers, no functional device was fabricated on time to fulfill the program end goals.

08 HYDROGEN↗

Evaluating Proxy Apps with FPGAs

Field-programmable gate arrays (FPGAs) are becoming more promising for high performance computing (HPC). Unlike fixed hardware specialization, reconfigurability allows FPGAs to be customized for a wide variety of HPC workloads. Our ultimate goal is to understand the viability of FPGAs as accelerators for some of the key HPC codes at LLNL and identify application characteristics that can benefit from the reconfigurability of FPGAs. More specifically, this LDRD project conducted a detailed performance study of FPGAs using sparse matrix computations and identified key optimization techniques to effectively use FPGA hardware resources.

97 MATHEMATICS AND COMPUTING↗

Cost estimation inputs for spent nuclear fuel geologic disposal concepts (Revision 1)

A set of 16 geologic disposal concepts is described in sufficient detail for rough-order-of-magnitude repository cost estimates, for disposal of spent nuclear reactor fuel in generic crystalline, argillaceous, and salt host geologic media. The description includes total length, diameter, and volume for all underground shafts, ramps, drifts and large-diameter borings. Basic types of ground support are specified. Total repository capacity is assumed to be approximately 140,000 MT of spent fuel, but concepts are described in terms of modular panels each containing 10,000 MT. Waste packaging is described, and the materials and outer dimensions for disposal overpacks are given. The manner of emplacement is specified, with any additional fixturing, lining, buffer materials, and backfill needed. Thermal limits for waste package emplacement or repository closure are given, as appropriate for enclosed and open emplacement modes, respectively. The 16 disposal concepts are based on disposal concept studies performed for the Used Fuel Disposition R&D program between 2011 and 2014, and the accompanying engineering analyses. Revision 1 results from review and checking of repository spacings, drift length estimates, repository plan area estimates, closure power limits, and estimates of fuel age at closure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cost Estimation Inputs for Spent Nuclear Fuel Geologic Disposal Concepts

A set of 16 geologic disposal concepts is described in sufficient detail for rough-order-of-magnitude repository cost estimates, for disposal of spent nuclear reactor fuel in generic crystalline, argillaceous, and salt host geologic media. The description includes total length, diameter, and volume for all underground shafts, ramps, drifts and large-diameter borings. Basic types of ground support are specified. Total repository capacity is assumed to be approximately 140,000 MT of spent fuel, but concepts are described in terms of modular panels each containing 10,000 MT. Waste packaging is described, and the materials and outer dimensions for disposal overpacks are given. The manner of emplacement is specified, with any additional fixturing, lining, buffer materials, and backfill needed. Thermal limits for waste package emplacement or repository closure are given, as appropriate for enclosed and open emplacement modes, respectively. The 16 disposal concepts are based on disposal concept studies performed for the Used Fuel Disposition R&D program between 2011 and 2014, and the accompanying engineering analyses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rapid Response Data Science for COVID-19

This report describes the results of a seven day effort to assist subject matter experts address a problem related to COVID-19. In the course of this effort, we analyzed the 29K documents provided as part of the White House's call to action. This involved applying a variety of natural language processing techniques and compression-based analytics in combination with visualization techniques and assessment with subject matter experts to pursue answers to a specific question. In this paper, we will describe the algorithms, the software, the study performed, and availability of the software developed during the effort.

60 APPLIED LIFE SCIENCES↗

Data-driven Alignment of the Tracker for the Mu2e Experiment

An alignment of the Mu2e Tracker is investigated using the Mu2e Offline Software and Millepede-II. Simulated misalignments of Tracker planes were inserted between Monte-Carlo event generation and before reconstruction using randomly generated $(x,y,z)$-translations and rotations of the rigid-body planes in the detector model. Cosmic ray muons, with no magnetic field present in the Detector Solenoid, will follow a straight-line trajectory. A maximum-likelihood fit is used to reconstruct a track and determine its parameters. Tracks traversing at least four planes, with ten registered straw hits, and a maximum time residual of $20$ ns are selected to be used in an alignment sample. The cuts were chosen to discard tracks with low information content, such as those with high levels of multiple scattering or those with low numbers of measurements contributing to a single track fit. Millepede-II produces the resulting alignment constants according to a simultaneous least-squares fit of the alignment parameters and the track parameters for all input tracks. The improved alignment constants are used to repeat the process and recover an increased number of suitable tracks, further improving the estimate of the alignment constants in subsequent iterations. A performance study of the process was conducted on a misaligned Tracker in the case of translation-only, and translation plus rotational misalignments. In both cases, the correct alignment constants were recovered to within statistical error after three global fit iterations. Additionally, a continuous integration system was developed for the \texttt{Mu2e/Offline} GitHub repository, introducing a convenient automated testing process for all proposed changes (``pull requests"). The tests developed included a full build of the software, followed by tests of the validation routines, geometry overlap checking, and multi-threading mode. Additionally, code quality checks and low-statistics physics comparison checks a re also available.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recovery and Recycle of Irradiated Low-Enriched Uranium from the Production of 99 Mo

Technetium-99m ( 99m Tc), the daughter (decay product) of molybdenum-99 ( 99 Mo), is the most commonly used medical radioisotope in the world. 99 Mo is produced primarily from the fissioning of 235 U. A potential future producer, Eden Radioisotopes, is planning to irradiate low-enriched-uranium metal-foil targets for production of 99 Mo. Their plan is to recover, purify, and recycle the irradiated LEU in a new set of targets inside their facility. This study assesses processes to (1) purify and recycle uranium following 99 Mo recovery and (2) convert the uranium to metal for subsequent foil production and target fabrication. A UREX (uranium recovery by extraction) liquid–liquid extraction flowsheet that utilizes centrifugal contactors was developed using the Argonne model for universal solvent extraction (AMUSE) to recover and purify the uranium. The calculated flowsheet predicted high decontamination from Pu and most fission products and >99.99% recovery of uranium. Suggestions for conversion of the UREX U-product (uranyl nitrate in dilute nitric acid) to U metal were provided based on literature studies and earlier laboratory studies performed at Argonne National Laboratory.

07 ISOTOPE AND RADIATION SOURCES↗