Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “operational considerations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Options for transpiration water removal in a crop growth system under zero gravity conditions

The operation of a microgravity crop-growth system is a critical feature of NASA's Closed Ecological Life Support System (CELSS) development program. Transpiration-evolved water must be removed from the air that is recirculated in such a system, perhaps supplying potable water in the process. The present consideration of candidate systems for CELSS water removal gives attention to energy considerations and to a mechanical, inertial-operation water-separation system that was chosen due to the depth of current understanding of its operation.

Blackwell, C. C.↗
NASA NTRS1995

Dynamic neural networks based on-line identification and control of high performance motor drives

In the automated and high-tech industries of the future, there wil be a need for high performance motor drives both in the low-power range and in the high-power range. To meet very straight demands of tracking and regulation in the two quadrants of operation, advanced control technologies are of a considerable interest and need to be developed. In response a dynamics learning control architecture is developed with simultaneous on-line identification and control. the feature of the proposed approach, to efficiently combine the dual task of system identification (learning) and adaptive control of nonlinear motor drives into a single operation is presented. This approach, therefore, not only adapts to uncertainties of the dynamic parameters of the motor drives but also learns about their inherent nonlinearities. In fact, most of the neural networks based adaptive control approaches in use have an identification phase entirely separate from the control phase. Because these approaches separate the identification and control modes, it is not possible to cope with dynamic changes in a controlled process. Extensive simulation studies have been conducted and good performance was observed. The robustness characteristics of neuro-controllers to perform efficiently in a noisy environment is also demonstrated. With this initial success, the principal investigator believes that the proposed approach with the suggested neural structure can be used successfully for the control of high performance motor drives. Two identification and control topologies based on the model reference adaptive control technique are used in this present analysis. No prior knowledge of load dynamics is assumed in either topology while the second topology also assumes no knowledge of the motor parameters.

Rubaai, Ahmed↗
NASA NTRS2019

Supporting Crew Autonomy in Deep Space Exploration: Preliminary Onboard Capability Requirements and Proposed Research Questions. Technical Report of the Autonomous Crew Operations Technical Interchange Meeting

Communication delays are a critical challenge posed by long duration deep space exploration. Space missions historically have relied on an ever-present Mission Control Center (MCC) to direct operations in near real-time. As unanticipated anomalies that defeat fault detection and resolution systems do arise, the lack of real-time communication will significantly weaken what the MCC support represents: a reliable safety net for the flight crew through its deep and diverse areas of expertise and investigative resources. As a consequence, future space vehicles and habitats need to be equipped with capabilities to support the flight crew to operate with little or no ground support. Considerations must be given to vehicle and mission designs that will fortify the traditionally ground-centered safety net and forge new support systems, when communication delays exist. In August 2018, NASA’s Human Research Program, through its Human Factors and Behavioral Performance Element, convened a Technical Interchange Meeting (TIM) on Autonomous Crew Operations at NASA Ames Research Center. The goal of the meeting was to gather input from NASA centers, industry, academia, and branches of the Department of Defense (DoD) to address how intelligent technologies can be applied to augment onboard capabilities to support crew anomaly response. The TIM featured 24 presentations by 29 speakers and hosted a total of 59 attendees, including 43 from 5 NASA centers (Ames, Johnson, Langley, Marshall, and Jet Propulsion Lab) and 4 from the DoD (3 from Army Research Lab and 1 from Naval Postgraduate School), with remaining attendees from academia (e.g., UC Davis, CMU) and industry (e.g., IBM, Siemens). Discussions were centered around three themes: standards and guidelines, lessons learned in analog environments, and technologies. To help provide a framework for discussion, a concept matrix describing anomaly response processes was created prior to the TIM (Figure 1, page 6). The matrix captures the steps involved (monitoring and detection, diagnosis, solution development and evaluation, solution implementation and verification, resolution documentation) as well as the resources and capabilities required to support these steps (data, knowledge, analysis, synthesis, resource management). A wallpaper size printout of the matrix was utilized at the TIM to solicit attendee inputs along the three themes; the activity garnered 108 submissions of ideas. Overall, what emerged from TIM discussions was a picture of mismatch between crew anomaly response needs and support that can be provided by existing intelligent technologies. The needs are broad, spanning multiple steps and processes/resources, with many of which lacking support from existing technologies, such as knowledge management throughout the steps of problem solving (especially in resolution documentation) and manpower management. The solutions provided by existing intelligent technologies are specific to the steps/processes that they are designed to support and constrained to solving only problems similar to those that have occurred before. What is lacking from technologies is typically made up by humans, specifically their complex critical thinking, creative problem solving, and domain expertise. In the end, the TIM highlighted the pressing need to support responses to onboard anomalies during autonomous crew operations, particularly those that have eluded the system tests, inspection, and other assurance processes. Such anomalies can potentially threaten crew and vehicle safety, as well as significantly impact overall operations with additional workload. These fairly rare events are difficult to anticipate and prepare for, given the state-of-the-art in intelligent technologies. This is true even for anomalies that stem from “unknown knowns”—cases in which there is sufficient external information to characterize the problem but the overall pattern fails to be recognized by the problem solver, or in which the internal knowledge needed to solve a problem is held tacitly and potentially accessible by the problem solver but not articulated. It follows that the ability to tackle anomalies lies not only with the availability of relevant information and knowledge but also their accessibility in times of need. To that end, we propose research questions along the following three broad themes: • How intelligent technologies can help make relevant knowledge and information available? • How intelligent technologies can help make relevant knowledge and information accessible? • How intelligent technologies can help support the crew operating as a team in anomaly response processes?

autonomous crew operations↗
NASA NTRS2005

Materials Control for Aerospace Applications

The distant future of mankind and the ultimate survivability of the human race, as it is known today, will depend on mans' ability to break earthly bonds and establish new territorial positions throughout the universe. Man must therefore be positioned to not only travel to, but also, to readily adapt to numerous and varying environments. For this mass migration across the galaxies nothing is as import to the human race as is NASA's future missions into Low Earth Orbit (LEO), to the moon, and/or Mars. These missions will form the building blocks to eternity for mankind. From these missions, NASA will develop the foundations for these building blocks based on sound engineering and scientific principles, both known and yet to be discovered. The integrity of the program will lead to development, tracking and control of the most basic elements of hardware production: That being development and control of applications of space flight materials. Choosing the right material for design purposes involves many considerations, such as governmental regulations associated with manufacturing operations, both safety of usage and of manufacturing, general material usage requirements, material longevity and performance requirements, material interfacing compatibility and material usage environments. Material performance is subject to environmental considerations in as much as a given material may perform exceptionally well at standard temperatures and pressures while performing poorly under non-standard conditions. These concerns may be found true for materials relative to the extreme temperatures and vacuum gradients of high altitude usage. The only way to assure that flight worthy materials are used in design is through testing. However, as with all testing, it requires both time on schedule and cost to the operation. One alternative to this high cost testing approach is to rely on a materials control system established by NASA. The NASA community relies on the MAPTIS materials control system founded at MSFC and supported by the other NASA Centers. This system is a data bank of all materials used in space flight operations. These materials are rated for several characteristics that are common concerns in high altitude or deep space usage: Odor, off gassing, material fluid compatibility, toxicity, corrosion susceptibility, stress corrosion susceptibility, etc.

Ferguson, Michael↗
NASA NTRSDate not supplied

Extending the Duration of Crewed Stays on the Lunar Surface

NASA’s Artemis missions aim to return humans to the Moon for the first time since the Apollo Program. Unlike the Apollo missions, Artemis missions will take advantage of pre-emplaced assets on the lunar surface to support crewed exploration, science, and utilization. Although the initial Artemis surface missions are intended to keep crew on the lunar surface for durations ranging from several days to several weeks, crewed stays of longer periods may provide additional support toward NASA’s Moon to Mars Objectives, including long-term exploration and continuous human lunar presence. If mission durations are extended beyond the expected few weeks, the elements and concepts of operation for the lunar architecture will need to be capable of supporting that extension. This paper uses an integrated systems analysis perspective to examine the architectural considerations of extending the duration of human missions on the lunar surface. By identifying these key architectural considerations, this paper offers insight into how elements and operations might meet the demands of potential future mission concepts. This paper does not recommend changes to NASA’s lunar architecture, and it does not evaluate whether any mission concepts affect the relative satisfaction of the Moon to Mars Objectives. However, if crew do remain on the surface for progressively longer periods of time, the functions and capabilities provided by the assets supporting the crew may need to adjust to support the needs of those missions. The functions and capabilities identified as key to enable such extended duration missions include power generation and storage, logistics delivery, radiation mitigation, provision of medical and exercise capability, abort from the lunar surface, maintenance, and the provision of pressurized volume. For example, the medical capabilities available to the crew may become more extensive, and habitable elements may need to change to support longer crewed periods (and shorter quiescent periods). In some cases, these changes may be accomplished through alterations to use cases, operational changes, or the evolution of lunar surface elements, but in other cases, new elements may be preferable. By identifying key considerations for the functions and capabilities of notional lunar surface elements as the length of each crewed mission is extended from several days to continuous human presence on the Moon, this paper assesses how the elements of NASA’s lunar architecture might support the extension of mission durations. In addition, this analysis can help inform future evaluation of whether such extended duration missions improve NASA’s ability to address its Moon to Mars Objectives.

Garrett M. Carman↗
NASA NTRSDate not supplied

Annoyance Model Assessments of Urban Air Mobility Vehicle Operations

As urban air mobility (UAM) vehicles begin to enter service, consideration must be given to vertiport siting and flight routing to help reduce community noise impact and promote adoption by the community. Notwithstanding environmental justice concerns, a possible early strategy is to operate out of existing heliports and fly along established helicopter routes, many of which follow uninhabited waterways and/or roadways (with the thought for the latter that an already noisy ambient environment will mask the sound of the aircraft). However, no prior annoyance model has been fielded that both takes audibility into account and that may be applied to such a real-world strategy. This paper reviews a recently developed annoyance model that includes audibility as a factor and applies it to two flight operations. A simple overflight case is first undertaken to demonstrate the approach. A point-to-point operation in the New York City area is then considered to demonstrate how annoyance varies across an urban soundscape. The cases considered use modeled UAM vehicle noise propagated to a set of ground observers as the signals and either recorded or modeled ambient acoustic data as the maskers.

aircraft community noise↗
NASA NTRSDate not supplied

Annoyance Model Assessments of Urban Air Mobility Vehicle Operations

As urban air mobility (UAM) vehicles begin to enter service, consideration must be given to vertiport siting and flight routing to help reduce community noise impact and promote adoption by the community. Notwithstanding environmental justice concerns, a possible early strategy is to operate out of existing heliports and fly along established helicopter routes, many of which follow uninhabited waterways and/or roadways (with the thought for the latter that an already noisy ambient environment will mask the sound of the aircraft). However, no prior annoyance model has been fielded that both takes audibility into account and that may be applied to such a real-world strategy. This paper reviews a recently developed annoyance model that includes audibility as a factor and applies it to two flight operations. A simple overflight case is first undertaken to demonstrate the approach. A point-to-point operation in the New York City area is then considered to demonstrate how annoyance varies across an urban soundscape. The cases considered use modeled UAM vehicle noise propagated to a set of ground observers as the signals and either recorded or modeled ambient acoustic data as the maskers.

aircraft community noise↗
NASA NTRS1973

The role of jet stability in edgetone generation.

Consideration of the role of stability of the mean jet flow of an edgetone system in the edgetone operation. A brief description of the main features of the edgetone operation and a brief review of the pertinent background are presented. This is followed by a discussion of the inadequacy of parallel flow stability considerations in explaining edgetone features. An analysis is made of the stability characteristics of a slightly nonparallel jet flow, and the role of jet stability based on these considerations in the edgetone operation is discussed. It is shown that the characteristics obtained by considering the nonparallel nature of the jet flowfield lead to a satisfactory description of the phenomenon, including a frequency selection criterion based on the concept of the most amplified disturbance frequency at each edge position.

Woolley, J. P.↗
NASA NTRS1982

Continued research on selected parameters to minimize community annoyance from airport noise

A mathematical model of the annoyance created at an airport by aircraft operations is developed. The model incorporates population distribution considerations around an airport and the annoyance caused by aircraft noise. The objective function of this model corresponds to seeking to minimize total population annoyance created by all aircraft operations in a 24-hour period. Several factors are included in this model as constraint bounded. Demand for flight services is incorporated by including lower bounds on the number of operations by type of aircraft, runway used and time period. Also upper bounds on the number of operations for each runway are included. The mathematical model as formulated is recognized as corresponding to a nonlinear integer mathematical programming problem.

Frair, L.↗
NASA NTRS1979

Design considerations for the Tandem Junction Solar Cell

Structure and operation of the tandem junction cell (TJC) are described. The impact of using only back contacts is discussed. A model is presented which explains operation of the TJC in terms of transistor action. The model is applied to predict TJC performance as a function of physical parameters.

Matzen, W. T.↗
NASA NTRS1988

Automated orbital rendezvous considerations

The control of the rendezvous vehicle during proximity operations is considered. It is shown how fuzzy sets can be used for autonomous vehicle control to model the human capability of common sense reasoning. Such models are integrated with expert systems and engineering control systems technology to create a system that performs comparably to a manned system.

Lea, Robert N.↗
NASA NTRS1991

Structural dynamic and aeroelastic considerations for hypersonic vehicles

The specific geometrical, structural, and operational environment characteristics of hypersonic vehicles are discussed with particular reference to aerospace plane type configurations. A discussion of the structural dynamic and aeroelastic phenomena that must be addressed for this class of vehicles is presented. These phenomena are in the aeroservothermoelasticity technical area. Some illustrative examples of recent experimental and analytical work are given. Some examples of current research are pointed out.

Cazier, F. W., Jr.↗
NASA NTRS1983

Applications of fiber optics technology to the Space Station

Attention is given to the EM interference, data bandwidth requirement, zero gravity operation, data security, crew safety, and modular expansion considerations affecting the future design of fiber-optical systems for large manned orbiting stations. Emphasis is given to replacing current, solar cell array electric systems technology for onboard furnace operation, leading to the formulation of a concentrated solar energy (thermal IR) transport system that yields higher efficiency than photovoltaics, despite its lower weight, in conjunction with Brayton, Rankine or Stirling cycle engines. The optical characteristics of the optical fibers employed by this system are discussed.

Erwin, H. O.↗
NASA NTRS2012

Advancing Data Assimilation in Operational Hydrologic Forecasting: Progresses, Challenges, and Emerging Opportunities

Data assimilation (DA) holds considerable potential for improving hydrologic predictions as demonstrated in numerous research studies. However, advances in hydrologic DA research have not been adequately or timely implemented in operational forecast systems to improve the skill of forecasts for better informed real-world decision making. This is due in part to a lack of mechanisms to properly quantify the uncertainty in observations and forecast models in real-time forecasting situations and to conduct the merging of data and models in a way that is adequately efficient and transparent to operational forecasters. The need for effective DA of useful hydrologic data into the forecast process has become increasingly recognized in recent years. This motivated a hydrologic DA workshop in Delft, the Netherlands in November 2010, which focused on advancing DA in operational hydrologic forecasting and water resources management. As an outcome of the workshop, this paper reviews, in relevant detail, the current status of DA applications in both hydrologic research and operational practices, and discusses the existing or potential hurdles and challenges in transitioning hydrologic DA research into cost-effective operational forecasting tools, as well as the potential pathways and newly emerging opportunities for overcoming these challenges. Several related aspects are discussed, including (1) theoretical or mathematical aspects in DA algorithms, (2) the estimation of different types of uncertainty, (3) new observations and their objective use in hydrologic DA, (4) the use of DA for real-time control of water resources systems, and (5) the development of community-based, generic DA tools for hydrologic applications. It is recommended that cost-effective transition of hydrologic DA from research to operations should be helped by developing community-based, generic modeling and DA tools or frameworks, and through fostering collaborative efforts among hydrologic modellers, DA developers, and operational forecasters.

forecasting↗
NASA NTRS2012

Simpler ISS Flight Control Communications and Log Keeping via Social Tools and Techniques

The heart of flight operations control involves a) communicating effectively in real time with other controllers in the room and/or in remote locations and b) tracking significant events, decisions, and rationale to support the next set of decisions, provide a thorough shift handover, and troubleshoot/improve operations. International Space Station (ISS) flight controllers speak with each other via multiple voice circuits or loops, each with a particular purpose and constituency. Controllers monitor and/or respond to several loops concurrently. The primary tracking tools are console logs, typically kept by a single operator and not visible to others in real-time. Information from telemetry, commanding, and planning systems also plays into decision-making. Email is very secondary/tertiary due to timing and archival considerations. Voice communications and log entries supporting ISS operations have increased by orders of magnitude because the number of control centers, flight crew, and payload operations have grown. This paper explores three developmental ground system concepts under development at Johnson Space Center s (JSC) Mission Control Center Houston (MCC-H) and Marshall Space Flight Center s (MSFC) Payload Operations Integration Center (POIC). These concepts could reduce ISS control center voice traffic and console logging yet increase the efficiency and effectiveness of both. The goal of this paper is to kindle further discussion, exploration, and tool development.

Scott, David W.↗
NASA NTRSDate not supplied

Overview of JAXA and NASA Collaboration on Manned and Unmanned Aircraft Operations Integration in Disaster Response

Natural disasters have increased in frequency and intensity. With that increase has come an increased focus on improving disaster response efforts. As part of this focus, the Japan Aerospace Exploration Agency (JAXA) and the National Aeronautics and Space Administration (NASA) have been in collaboration since 2016 to explore improved airspace management for disaster response through the integration of manned aircraft and small Unmanned Aircraft Systems (UAS). The approach to this integration has been through leveraging JAXA’s Disaster Relief Aircraft Information Sharing Network (D-NET) system for the coordinated management of manned aircraft assets combined with NASA’S UAS Traffic Management (UTM) system for the management of UAS assets. To drive the innovation in improved response, JAXA and NASA have successfully connected respective systems and conducted a series of live flight tests first as part of a large-scale disaster drill and later in dedicated research flights. In each case, the D-NET and UTM systems were connected and exchanged data in real-time, which supported the planning and tracking of manned and unmanned operations. Through these test events, a number of key findings were derived through data analysis and stakeholder interviews with respect to the improvements offered by the integrated systems as well as key considerations for situation awareness of pilots regarding other operations in the airspace and flight path management.

disaster response↗
NASA NTRS2011

System Oriented Runway Management: A Research Update

The runway configuration used by an airport has significant implications with respect to its capacity and ability to effectively manage surface and airborne traffic. Aircraft operators rely on runway configuration information because it can significantly affect an airline's operations and planning of their resources. Current practices in runway management are limited by a relatively short time horizon for reliable weather information and little assistance from automation. Wind velocity is the primary consideration when selecting a runway configuration; however when winds are below a defined threshold, discretion may be used to determine the configuration. Other considerations relevant to runway configuration selection include airport operator constraints, weather conditions (other than winds) traffic demand, user preferences, surface congestion, and navigational system outages. The future offers an increasingly complex landscape for the runway management process. Concepts and technologies that hold the potential for capacity and efficiency increases for both operations on the airport surface and in terminal and enroute airspace are currently under investigation. Complementary advances in runway management are required if capacity and efficiency increases in those areas are to be realized. The System Oriented Runway Management (SORM) concept has been developed to address this critical part of the traffic flow process. The SORM concept was developed to address all aspects of runway management for airports of varying sizes and to accommodate a myriad of traffic mixes. SORM, to date, addresses the single airport environment; however, the longer term vision is to incorporate capabilities for multiple airport (Metroplex) operations as well as to accommodate advances in capabilities resulting from ongoing research. This paper provides an update of research supporting the SORM concept including the following: a concept of overview, results of a TRCM simulation, single airport and Metroplex modeling effort and a benefits assessment.

Lohr, Gary W.↗