Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Computer models of the growth of monolayers

Preliminary results from a novel reversible computer model of monolayer nucleation and growth are compared with extant irreversible computer models of monolayer growth's early process stages. Attention is given to the microstructures resulting from direct impingement, the cluster density attributable to direct impingement, microstructures resulting from impingement combined with surface migration, and the cluster density attributable to impingement in combination with surface migration.

Salik, Joshua↗

Scaling laws for buckling instability in monolayer networks

In this comment a power law is argued to govern the thickening of cell widths relative to their lengths in buckling monolayer networks. A scaling relation is derived for general instabilities in cellular networks, and a reply is given that questions the use of the amplitude of the buckling undulation in an already buckled wall in the Euler relation. Both treatments provided shed light on the stability/instability of wavelengths for buckling monolayer networks.

Noever, David A.↗

Measurement of the Surface Dilatational Viscosity of an Insoluble Surfactant Monolayer at the Air/Water Interface Using a Pendant Drop Apparatus

When a fluid interface with surfactants is at rest, the interfacial stress is isotropic (as given by the equilibrium interfacial tension), and is described by the equation of state which relates the surface tension to the surfactant surface concentration. When surfactants are subjected to shear and dilatational flows, flow induced interaction of the surfactants; can create interfacial stresses apart from the equilibrium surface tension. The simplest relationship between surface strain rate and surface stress is the Boussinesq-Scriven constitutive equation completely characterized by three coefficients: equilibrium interfacial tension, surface shear viscosity, and surface dilatational viscosity Equilibrium interfacial tension and surface shear viscosity measurements are very well established. On the other hand, surface dilatational viscosity measurements are difficult because a flow which change the surface area also changes the surfactant surface concentration creating changes in the equilibrium interfacial tension that must be also taken into account. Surface dilatational viscosity measurements of existing techniques differ by five orders of magnitude and use spatially damped surface waves and rapidly expanding bubbles. In this presentation we introduce a new technique for measuring the surface dilatational viscosity by contracting an aqueous pendant drop attached to a needle tip and having and insoluble surfactant monolayer at the air-water interface. The isotropic total tension on the surface consists of the equilibrium surface tension and the tension due to the dilation. Compression rates are undertaken slow enough so that bulk hydrodynamic stresses are small compared to the surface tension force. Under these conditions we show that the total tension is uniform along the surface and that the Young-Laplace equation governs the drop shape with the equilibrium surface tension replaced by the constant surface isotropic stress. We illustrate this technique using DPPC as the insoluble surfacant monolayer and measured for it a surface dilatational viscosity in the LE phase that is 20 surface poise.

Lorenzo, Jose↗

Visualizing Individual Nitrogen Dopants in Monolayer Graphene

In monolayer graphene, substitutional doping during growth can be used to alter its electronic properties. We used scanning tunneling microscopy, Raman spectroscopy, x-ray spectroscopy, and first principles calculations to characterize individual nitrogen dopants in monolayer graphene grown on a copper substrate. Individual nitrogen atoms were incorporated as graphitic dopants, and a fraction of the extra electron on each nitrogen atom was delocalized into the graphene lattice. The electronic structure of nitrogen-doped graphene was strongly modified only within a few lattice spacings of the site of the nitrogen dopant. These findings show that chemical doping is a promising route to achieving high-quality graphene films with a large carrier concentration.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modification of Au/TiO(2) Nanosystems by SiO(2) Monolayers: Toward the Control of the Catalyst Activity and Stability

The activity and stability of Au/TiO{sub 2} catalysts depend on several different factors such as the anchoring strength of the Au particles at the TiO{sub 2} surface, the particle sintering, and the surface mobility of individual gold atoms and/or gold particles. Au/TiO{sub 2} catalysts can be made resistant to sintering by atomic layer deposition (ALD) of a layer of SiO{sub 2} onto the catalysts. In this study, first-principles density-functional calculations are used to investigate how the stability of Au nanoparticles is modified when a partial monolayer of SiO{sub 2} is deposited on a Au/TiO{sub 2} catalyst. We find that SiO{sub 2} structures deposited on a pure TiO{sub 2} substrate exhibit lattice-mismatch instabilities that result in the formation of additional strong anchoring sites for Au atoms/nanoparticles. An atomic-scale roughness introduced by a partial monolayer of SiO{sub 2} can slow the atomic surface diffusion and inhibit Au nanoparticle growth/sintering, in agreement with previous experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Near-Edge X-ray Absorption Fine Structure Spectroscopy of Diamondoid Thiol Monolayers on Gold

Diamondoids, hydrocarbon molecules with cubic-diamond-cage structures, have unique properties with potential value for nanotechnology. The availability and ability to selectively functionalize this special class of nanodiamond materials opens new possibilities for surface-modification, for high-efficiency field emitters in molecular electronics, as seed crystals for diamond growth, or as robust mechanical coatings. The properties of self-assembled monolayers (SAMs) of diamondoids are thus of fundamental interest for a variety of emerging applications. This paper presents the effects of thiol substitution position and polymantane order on diamondoid SAMs on gold using near-edge X-ray absorption fine structure spectroscopy (NEXAFS) and X-ray photoelectron spectroscopy (XPS). A framework to determine both molecular tilt and twist through NEXAFS is presented and reveals highly ordered diamondoid SAMs, with the molecular orientation controlled by the thiol location. C 1s and S 2p binding energies are lower in adamantane thiol than alkane thiols on gold by 0.67 {+-} 0.05 eV and 0.16 {+-} 0.04 eV respectively. These binding energies vary with diamondoid monolayer structure and thiol substitution position, consistent with different amounts of steric strain and electronic interaction with the substrate. This work demonstrates control over the assembly, in particular the orientational and electronic structure, providing a flexible design of surface properties with this exciting new class of diamond clusters.

36 MATERIALS SCIENCE↗

Near-Edge X-Ray Absorption Fine Structure Spectroscopy of Diamondoid Thiol Monolayers on Gold

Diamondoids, hydrocarbon molecules with cubic-diamond-cage structures, have unique properties with potential value for nanotechnology. The availability and ability to selectively functionalize this special class of nanodiamond materials opens new possibilities for surface modification, for high-efficiency field emitters in molecular electronics, as seed crystals for diamond growth, or as robust mechanical coatings. The properties of self-assembled monolayers (SAMs) of diamondoids are thus of fundamental interest for a variety of emerging applications. This paper presents the effects of thiol substitution position and polymantane order on diamondoid SAMs on gold using near-edge X-ray absorption fine structure spectroscopy (NEXAFS) and X-ray photoelectron spectroscopy (XPS). A framework to determine both molecular tilt and twist through NEXAFS is presented and reveals highly ordered diamondoid SAMs, with the molecular orientation controlled by the thiol location. C 1s and S 2p binding energies are lower in adamantane thiol than alkane thiols on gold by 0.67 {+-} 0.05 and 0.16 {+-} 0.04 eV, respectively. These binding energies vary with diamondoid monolayer structure and thiol substitution position, consistent with different degrees of steric strain and electronic interaction with the substrate. This work demonstrates control over the assembly, in particular the orientational and electronic structure, providing a flexible design of surface properties with this exciting new class of diamond nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Backfilled, self-assembled monolayers and methods of making same

Backfilled, self-assembled monolayers and methods of making the same are disclosed. The self-assembled monolayer comprises at least one functional organosilane species and a substantially random dispersion of at least one backfilling organosilane species among the functional organosilane species, wherein the functional and backfilling organosilane species have been sequentially deposited on a substrate. The method comprises depositing sequentially a first organosilane species followed by a backfilling organosilane species, and employing a relaxation agent before or during deposition of the backfilling organosilane species, wherein the first and backfilling organosilane species are substantially randomly dispersed on a substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of molecular ordering on electrical and friction properties of omega-(trans-4-stilbene)alkylthiol self-assembled monolayers on Au (111)

The electrical and friction properties of omega-(trans-4-stilbene)alkylthiol self-assembled monolayers (SAMs) on Au(111) were investigated using atomic force microscopy (AFM) and near edge x-ray absorption fine structure spectroscopy (NEXAFS). The sample surface was uniformly covered with a molecular film consisting of very small grains. Well-ordered and flat monolayer islands were formed after the sample was heated in nitrogen at 120 oC for 1 h. While lattice resolved AFM images revealed a crystalline phase in the islands, the area between islands showed no order. The islands exhibit substantial reduction (50percent) in friction, supporting the existence of good ordering. NEXAFS measurements revealed an average upright molecular orientation in the film, both before and after heating, with a narrower tilt-angle distribution for the heated fim. Conductance-AFM measurements revealed a two orders of magnitude higher conductivity on the ordered islands than on the disordered phase. We propose that the conductance enhancement is a result of a better pi-pi stacking between the trans-stilbene molecular units as a result of improved ordering in islands.

36 MATERIALS SCIENCE↗

Site-Controlled Quantum Emitters in Monolayer MoSe 2

Atomically thin semiconductors provide a highly attractive platform for quantum emitters (QEs): They can be combined with arbitrary substrates, can be spatially aligned with photonic structures, and can be electrically driven. All QEs reported to date in these materials have, however, relied on nominally spin-forbidden transitions, with radiative rates falling substantially below those of other solid-state QE systems. In this work, we employ strain confinement in monolayer MoSe 2 to produce engineered QEs, as confirmed in photon antibunching measurements. We discuss spin-allowed versus spin-forbidden transitions based on magneto- and time-resolved photoluminescence measurements. We calculate a radiative rate for spin-allowed quantum emission greater than 1 ns –1 , which exceeds reported radiative rates of WSe 2 QEs by 2 orders of magnitude.

2D materials↗

Centimeter-Scale and Visible Wavelength Monolayer Light-Emitting Devices

Monolayer 2D transition metal dichalcogenides (TMDCs) have shown great promise for optoelectronic applications due to their direct bandgaps and unique physical properties. In particular, they can possess photoluminescence quantum yields (PL QY) approaching unity at the ultimate thickness limit, making their application in light-emitting devices highly promising. In this research, large-area WS 2 grown via chemical vapor deposition is synthesized and characterized for visible (red) light-emitting devices. Detail optical characterization of the synthesized films is performed, which show peak PL QY as high as 12%. Electrically pumped emission from the synthetic WS 2 is achieved utilizing a transient-mode electroluminescence device structure, which consists of a single metal–semiconductor contact and alternating gate fields to achieve bipolar emission. Utilizing this aforementioned structure, a centimeter-scale ( ≈ 0.5 cm 2 ) visible (640 nm) display is demonstrated, fabricated using TMDCs to showcase the potential of this material system for display applications.

36 MATERIALS SCIENCE↗

Chemical Vapor Deposition of Monolayer Rhenium Disulfide (ReS 2 )

A direct synthesis of monolayer and multilayer ReS 2 by chemical vapor deposition at a low temperature of 450 °C is reported. We performed a detailed characterization of this material using various spectroscopy and microscopy methods. Furthermore initial field-effect transistor characteristics are evaluated, which highlight the potential in being used as an n-type semiconductor.

2D materials↗

Monolayer Superconductivity and Tunable Topological Electronic Structure at the Fe(Te,Se)/Bi 2 Te 3 Interface

The interface between 2D topological Dirac states and an s-wave superconductor is expected to support Majorana-bound states (MBS) that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum-locked topological interface states (TIS) which are simultaneously superconducting. While signatures of MBS have been observed in the magnetic vortex cores of bulk FeTe 0.55 Se 0.45 , inhomogeneity and disorder from doping make these signatures unclear and inconsistent between vortices. In this work, superconductivity is reported in monolayer (ML) FeTe 1–y Se y (Fe(Te,Se)) grown on Bi 2 Te 3 by molecular beam epitaxy (MBE). Spin and angle-resolved photoemission spectroscopy (SARPES) directly resolve the interfacial spin and electronic structure of Fe(Te,Se)/Bi 2 Te 3 heterostructures. For y = 0.25, the Fe(Te,Se) electronic structure is found to overlap with the Bi 2 Te 3 TIS and the desired spin-momentum locking is not observed. In contrast, for y = 0.1, reduced inhomogeneity measured by scanning tunneling microscopy (STM) and a smaller Fe(Te,Se) Fermi surface with clear spin-momentum locking in the topological states are found. Hence, it is demonstrated that the Fe(Te,Se)/Bi 2 Te 3 system is a highly tunable platform for realizing MBS where reduced doping can improve characteristics important for Majorana interrogation and potential applications.

36 MATERIALS SCIENCE↗

Electrostatically Enhanced Buried Interface Binding of Self‐Assembled Monolayers for Efficient And Stable Inverted Perovskite Solar Cells

Inverted p‐i‐n structure perovskite solar cells (PSCs) have outperformed traditional n‐i‐p PSCs in recent years. A key advancement is the use of self‐assembled monolayers (SAMs) as hole transport layers. One class of widely used SAMs is carbazole‐based phosphonic acids. However, it is found that these SAMs lack strong binding with transparent conducting oxides (TCO) and perovskite. The weak binding strength results in suboptimal interfacial adhesion of the buried interface, which limits the device's stability. Here, interfacial binding is enhanced by increasing the dipole moment that creates a strong interfacial electric field that enhances electrostatic interactions at the TCO/perovskite interface, while incorporating tailored functional groups in SAMs to improve chemical anchoring to TCO and binding to perovskite. Specifically, the donor‐acceptor SAM molecule 4‐(7‐(4‐(bis(4‐methoxyphenyl)amino)‐2,5‐difluorophenyl)benzo[c][1,2,5]thiadiazol‐4‐yl)benzoic acid (PAFTB) is employed, which features an enhanced dipole moment along with electron‐donating and electron‐withdrawing functional groups to optimize interfacial interactions. Compared to extensively used [2‐(9H‐carbazol‐9‐yl)ethyl]phosphonic acid (2PACz), PAFTB enhances total interfacial adhesion by 2.8 times, thereby improving the thermal stability of the layer. Using this approach, PSCs are demonstrated with a certified quasi‐steady‐state power conversion efficiency of 24.9% and maintain 80% of the initial efficiency after 900 h of maximum power point tracking at 85 °C.

Interfacial adhesion↗

Controlling Interfacial Properties of Lithium-Ion Battery Cathodes with Alkylphosphonate Self-Assembled Monolayers

In this paper, the preparation and characterization of modified LiMn 2 O 4 (LMO) cathodes utilizing chemisorbed alkylphosphonic acids to chemically modify their surfaces are reported. Electrochemical methods to study ionic and molecular mobility through the alkylphosphonate self-assembled monolayers (SAMs) for different alkyl chain compositions, in order to better understand their impact on the lithium-ion electrochemistry, are utilized. Electrochemical trends for different chains correlate to trends observed in contact angle measurements and solvation energies obtained from computational methods, indicating that attributes of the microscopic wettability of these interfaces with the battery electrolyte have an important impact on ionic mobility. The effects of surface modification on Mn dissolution are also reported. The alkylphosphonate layer provides an important mode of chemical stabilization to the LMO, suppressing Mn dissolution by 90% during extended immersion in electrolytes. A more modest reduction in dissolution is found upon galvanostatic cycling, in comparison to pristine LMO cathodes. Finally, taken together, the data suggest that alkylphosphonates provide a versatile means for the surface modification of lithium-ion battery cathode materials allowing the design of specific interfaces through modification of organic chain functionalities.

25 ENERGY STORAGE↗

Nonlinear Dispersion Relation and Out‐of‐Plane Second Harmonic Generation in MoSSe and WSSe Janus Monolayers

Janus transition metal dichalcogenides are an emerging class of atomically thin materials with engineered broken mirror symmetry that gives rise to long‐lived dipolar excitons, Rashba splitting, and topologically protected solitons. They hold great promise as a versatile nonlinear optical platform due to their broadband harmonic generation tunability, ease of integration on photonic structures, and nonlinearities beyond the basal crystal plane. Here, second and third harmonic generation in MoSSe and WSSe Janus monolayers is studied. Polarization‐resolved spectroscopy is used to map the full second‐order susceptibility tensor of MoSSe, including its out‐of‐plane components. In addition, the effective third‐order susceptibility and the second‐order nonlinear dispersion close to exciton resonances for both MoSSe and WSSe are measured at room and cryogenic temperatures. This work sets a bedrock for understanding the nonlinear optical properties of Janus transition metal dichalcogenides and probing their use in the next‐generation on‐chip multifaceted photonic devices.

36 MATERIALS SCIENCE↗

Trivalent Rare Earth Adsorption at Phosphonic Acid Monolayers

The increasing need for rare earth separations requires a detailed understanding of trivalent ion behavior at charged aqueous interfaces. Here, neodymium (Nd) adsorption on Langmuir monolayers of octadecylphosphonic acid (ODPA), a single‐chain phosphonic acid capable of double deprotonation, at the air/water interface, is investigated. Combining sum frequency generation (SFG) spectroscopy with X‐ray fluorescence near total reflection (XFNTR), both the interfacial water ordering and ion density are examined. Under ambient conditions, Nd ions induce enhanced deprotonation of ODPA headgroups, leading to interfacial ion densities as high as 1 Nd per 30 Å 2 . This adsorption behavior arises from a complex interplay between direct electrostatic interactions, ion pairing, and hydration effects, which cannot be fully captured by classical Gouy–Chapman–Stern models. These insights into trivalent ion adsorption mechanisms provide a pathway toward more effective separation processes for rare earth metals.

adsorptions↗

Fragmentation dynamics of CS22+ on collision with a self assembled monolayer surface

Surface-induced dissociation of doubly charged CS22+ ions in collision with a self assembled monolayer surface of fluorinated alkyl thiol on gold 111 crystal has been studied on a beam scattering instrument. Two energetically distinct processes, corresponding to the Coulomb explosion and charge transfer induced dissociation have been observed and the latter process dominates the dissociation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗