Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Hybrid Mesoporous Carbon/Copper Ferrite Electrode for Asymmetric Supercapacitors

Asymmetric supercapacitors (ASCs) with two dissimilar electrodes are known to exhibit relatively moderate energy and power densities. If electrodes derived from earth-abundant materials or renewable resources such as lignocellulosic biomass (LCB) are used for fabrication, energy storage systems are expected to become less expensive and more sustainable. Hybrid electrode materials have advantages such as higher surface area, better chemical stability, and superior energy density. This study reports on the synthesis of a novel hybrid electrode material containing porous carbon (POC) and copper ferrite, which is designated as POC@Cu-ferrite, and its electrochemical performance in ASC configuration. Corn stover derived hydrochar is utilized for the sol–gel synthesis of POC@Cu-ferrite hybrid material using earth-abundant Cu and Fe-based precursors. This material is characterized using X-ray diffraction (XRD), Raman spectroscopy, Brunauer–Emmett–Teller (BET) surface area analyzer, and scanning and transmission electron microscopy (SEM/TEM). As-synthesized Cu-ferrite is found to contain 89.2% CuFe 2 O 4 and 10.8% Fe 2 O 3 , whereas other phases such as Fe 3 O 4 , CuFeO 2 , and CuO are observed for the POC@Cu-ferrite. BET-specific surface area (SSA) and pore volume of POC@Cu-ferrite are observed as 1068 m 2 /g and 0.72 cm 3 /g, respectively. POC@Cu-ferrite hybrid electrode is used with POC opposite electrode to fabricate ASC, which is tested using Gamry G-300 potentiostat/galvanostat/ZRA to obtain cyclic voltammetry (CV) profiles and galvanostatic charge–discharge (GCD) plots. ASC is also prepared using Cu-ferrite and POC materials and its specific capacitance and stability are compared with ASCs prepared with POC@Cu-ferrite and POC or graphene nanoplatelets (GNPs) electrodes. POC@Cu-ferrite hybrid electrode is found to be superior with a 2-fold higher capacitance and significant electrochemical stability over 100 GCD cycles as compared to the Cu-ferrite electrode.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stabilizing the heavily-doped and metallic phase of MoS 2 monolayers with surface functionalization

Monolayer molybdenum disulfide (MoS 2 ) is one of the most studied two-dimensional (2D) transition metal dichalcogenides that is being investigated for various optoelectronic properties, such as catalysis, sensors, photovoltaics, and batteries. One such property that makes this material attractive is the ease in which 2D MoS 2 can be converted between the semiconducting (2H) and metallic/semi-metallic (1T/1T') phases or heavily n-type doped 2H phase with ion intercalation, strain, or excess negative charge. Using n-butyl lithium (BuLi) immersion treatments, we achieve 2H MoS 2 monolayers that are heavily n-type doped with shorter immersion times (10–120 mins) or conversion to the 1T/1T' phase with longer immersion times (6–24 h); however, these doped/converted monolayers are not stable and promptly revert back to the initial 2H phase upon exposure to air. To overcome this issue and maintain the modification of the monolayer MoS 2 upon air exposure, we use BuLi treatments plus surface functionalization p-(CH 3 CH 2 ) 2 NPh-MoS 2 (Et 2 N-MoS 2 )—to maintain heavily n-type doped 2H phase or the 1T/1T' phase, which is preserved for over two weeks when on indium tin oxide or sapphire substrates. We also determine that the low sheet resistance and metallic-like properties correlate with the BuLi immersion times. These modified MoS 2 materials are characterized with confocal Raman/photoluminescence, absorption, x-ray photoelectron spectroscopy as well as scanning Kelvin probe microscopy, scanning electrochemical microscopy, and four-point probe sheet resistance measurements to quantify the differences in the monolayer optoelectronic properties. We will demonstrate chemical methodologies to control the modified monolayer MoS 2 that likely extend to other 2D transition metal dichalcogenides, which will greatly expand the uses for these nanomaterials.

2D TMDC↗
DOE OSTI2025

Development of direct ink write radially graded alumina/zirconia

Functionally graded materials (FGMs) are of interest in multiple fields, yet many materials combinations are limited by coefficient of thermal expansion (CTE) mismatch. Here, a radially graded alumina/yttria-doped zirconia (Al 2 O 3 /8YZ) FGM is used to demonstrate processing strategies to mitigate CTE and sintering behavior differences between these oxides. FGM materials are especially sensitive to ink stability during printing, as all components (in this case, Al 2 O 3 and 8YZ) must be stabilized in the same dispersant or additive solution. Thus, this system is also ideal to demonstrate ink optimization best practices. Materials were characterized throughout processing to correlate the effects of common additives on both the ceramic particle suspensions and final sintered components. Aggregation observed in the initial additive-containing suspensions were present in the sintered component. The differences in sintering onset temperature and shrinkage rate resulted in internal stresses within the sintered component, which ultimately caused mechanical failure of the component under low stress. In conclusion, a processing strategy was recommended to mitigate the sintering behavior mismatch of alumina and 8 wt% yttria-stabilized zirconia.

Lamm, Benjamin W. [Oak Ridge National Laboratory (↗
DOE OSTI2022

Development of Quantum Computing Interconnect Based on Aerosol Jet Printing and Electrochemical Deposition of Rhenium

The electrodeposition of rhenium on to a metal seed layer on flexible substrates is presented as a means to creating superconducting flexible cable connectors in an enabling plug-and-play approach for quantum computing. Cryogenic quantum electronics are currently connected using masses of stainless-steel coaxial cables that are bulky, rigid - both in form and design - and lead to significant joule heating, thermal noise, and cross talk. Here, we present an unprecedented approach to integrate an aerosol jet printed (AJP) metal seed layer with rhenium electrodeposition on a flexible substrate in the advancement of superconducting interconnect technologies. Silver and gold were printed using the ‘Nanojet’ aerosol jet printer on Kapton films. Adhesion of gold was found to be far superior to that of silver and adhesion on roughened Kapton surpassed that of its smooth counterpart. Electrodeposition of rhenium was successful on both silver and gold and an amorphous Re film was confirmed by XRD. Results for both materials are presented however due to the poor adhesion of silver to Kapton it was ruled out as a viable candidate. Composite materials were characterized by profilometry, EDS, XRD and FIBSEM. Electrical measurements of the composite at ambient temperature showed a critical temperature (T c ), where the resistance drops to 0, of 5.8 K, well above 4.2 K, the temperature of liquid helium. Stress-strain tests of the Ag-Re and Au-Re composites on roughened and smooth Kapton were completed. Cyclic flexure testing (200 cycles) to 1.25% strain showed smooth Kapton samples reach a stress of ~16 MPa, while Kapton roughened with sandpaper, reaches ~20MPa of stress for the same 1.25% strain.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-rate strength response of tantalum from dynamic hole closure experiments

The science and engineering communities have significant interest in experimental platforms to evaluate and improve models for dynamic material deformation. While well-developed platforms exist, there are still gaps to fill for strain and strain rate conditions accessed during impact and other high-rate loading scenarios. To fill one such gap for strength measurements, a platform was recently developed that accesses high strain rate (≥ 10 5 /s) and large strain (≥ 50%) conditions by measuring the transient closure of a cylindrical hole using in situ x-ray imaging. In the work reported here, further refinement of the platform is performed to reduce the potential effects of porosity and anelasticity on the measurement. This helps us to isolate the strength effects that are the focus of the experiment. The updated experimental configuration employs a two-layer flyer design and elongated target to reduce the magnitude of the tensile excursions associated with rarefaction wave interactions. This allows for a more direct assessment of strength models commonly used for dynamic simulations of metals. Here we apply the new technique to well-characterized tantalum material, allowing for a robust connection to other experimental techniques. Deformation localization can be a concern in large strain experiments, and to help inform future use of the experimental platform, we use simulations with a sub-zone treatment of shear banding to explore potential localization behavior. Here we develop and utilize an experimental configuration with improved isolation of strength effects that can be applied to an expanded range of materials.

42 ENGINEERING↗
DOE OSTI2023

Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron–Carbide Material

A boron-rich boron–carbide material (B4+δC) was synthesized by spark plasma sintering of a ball-milled mixture of high-purity boron powder and graphitic carbon at a pressure of 7 MPa and a temperature of 1930 °C. This high-pressure, high-temperature synthesized material was recovered and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, Vickers hardness measurements, and thermal oxidation studies. The X-ray diffraction studies revealed a single-phase rhombohedral structure (space group R-3m) with lattice parameters in hexagonal representation as a = 5.609 ± 0.007 Å and c = 12.082 ± 0.02 Å. The experimental lattice parameters result in a value of δ = 0.55, or the composition of the synthesized compound as B4.55C. The high-resolution scans of boron binding energy reveal the existence of a B-C bond at 188.5 eV. Raman spectroscopy reveals the existence of a 386 cm−1 vibrational mode representative of C-B-B linear chain formation due to excess boron in the lattice. The measured Vickers microhardness at a load of 200 gf shows a high hardness value of 33.8 ± 2.3 GPa. Thermal gravimetric studies on B4.55C were conducted at a temperature of 1300 °C in a compressed dry air environment, and its behavior is compared to other high-temperature ceramic materials such as high-entropy transition metal boride. The high neutron absorption cross section, high melting point, high mechanical strength, and thermal oxidation resistance make this material ideal for applications in extreme environments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Molecular Modifications of Crystalline Poly(triazine imide) for Advancing Its Structure–Property Relationships in Light-Driven Catalysis

Carbon-nitride materials represent light-absorbing structures composed of earth-abundant elements capable of being leveraged for semiconductor photocatalysis at their surfaces. This study systematically investigates the addition of molecular modifiers to the synthesis of crystalline carbon nitrides to assess their effects on the materials’ structure, optical bandgap, and photocatalytic activity for hydrogen (H 2 ) and oxygen (O 2 ) evolution under ultraviolet and visible-light irradiation. Melamine and five pyrimidine-centered analogs were employed as building blocks to modify various heteroatoms within the polymeric framework. The modified materials were characterized with attention to the differences introduced by the monomeric modifiers and their influence on the resulting structures and compositions. The findings indicate that these changes significantly broaden the visible-light absorption range, albeit with the gradual loss of the bulk crystalline structure. As the loading of modifiers increased beyond 50%, a predominantly amorphous form of carbon nitride emerged. XPS, 13 C solid-state NMR, and SEM analyses corroborated the changes, which were attributed to modifications of the elemental composition and a reduced amount of Li cations and charge-balancing Cl anions owing to fewer binding sites in the intralayer cavities. In photocatalytic measurements under an ultraviolet 390 nm LED, and aided by photodeposited nanoparticle cocatalysts, the unmodified PTI-LiCl framework demonstrated the highest H 2 evolution rate (HER; 3.44 mmol·g –1 ·h –1 ) with an apparent quantum yield of 5.4%, along with total water splitting at rates of 163 μmol of H 2 ·g –1 ·h –1 and 75.6 μmol·O 2 g –1 ·h –1 . While PTI-LiCl showed trace activity under a visible-light 440 nm LED, all modified materials exhibited enhanced reactivity with as low as 5% molecular modifiers. The photocatalytic rates peaked at a 15% modification level when using 2,4,6-triaminopyrimidine, with rates of 33 μmol·g –1 ·h –1 for HER, along with 19.7 μmol of H 2 ·g –1 ·h –1 and 8.7 μmol of O 2 ·g –1 ·h –1 for total water splitting. Density functional theory calculations were used to probe electronic structure changes resulting from the modifications. Furthermore, these results elucidate the structural, optical, and electronic changes arising from the five selected molecular modifiers and their impact on the semiconductors’ photocatalytic properties.

Electrical conductivity↗
DOE OSTI2021

Bulk Production of Any Ratio 12 C: 13 C Turbostratic Flash Graphene and Its Unusual Spectroscopic Characteristics

As graphene enjoys worldwide research and deployment, the biological impact, geologic degradation, environmental retention, and even some physical phenomena remain less well studied. Bulk production of 13 C-graphene yields a powerful route to study all of these questions. Gram scale synthesis of high quality and high purity turbostratic flash graphene with varying amounts of 13 C-enrichment, from 5% to 99% is reported here. Here, the material is characterized by solid state nuclear magnetic resonance spectroscopy, Raman spectroscopy, infrared (IR) spectroscopy, X-ray photoelectron spectroscopy and inductively coupled plasma mass spectrometry. Notably, an unusual enhancement in the Raman spectroscopic D’ peak is observed, resulting from the modification in vibrational frequency through isotopic enrichment favoring intravalley phonon scattering modes. While the IR absorbance spectrum of graphene is for the most part silent, we prepare here 13 C-enhanced graphene samples that show a large aromatic 12 C= 13 C stretch that reveals this IR-active mode.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

LiNi 0.8 Fe 0.1 Al 0.1 O 2 as a Cobalt-Free Cathode Material with High Capacity and High Capability for Lithium-Ion Batteries

Obtaining cathode materials with high capacity and cycle stability is one of the main challenges regarding the success of electric vehicle technologies. However, most of the widely used materials with these properties involve the use of toxic and expensive cobalt as the active material. To overcome this challenge, this work proposes a novel cobalt-free cathode material, synthesized for the first time using a solid-state reaction, whose general formula is LiNi 0.8 Fe 0.1 Al 0.1 O 2 (NFA). This class of materials offers high capacity and reduces the battery costs by removing cobalt, without jeopardizing the structural stability and safety of the NFAs. The morphology and the structural properties of the obtained NFA cathode material were characterized using different techniques, e.g., scanning electronic microscopy, X-ray diffraction, X-ray fluorescence, and infrared and Raman spectroscopies. The electrochemical activity and diffusivity of the Li-ion during lithium removal and its insertion into the bulk of the NFA cathode demonstrated high-yield specific capacities of ≈180 mAh g –1 at 0.1C, along with a reasonable rate capability and cycling stability, with a capacity retention of ≈99.6% after 100 charge/discharge cycles at a rate of C/2, and whose operando X-ray diffraction experiments have been used to study the crystallographic transitions during the lithiation–delithiation reaction.

25 ENERGY STORAGE↗
DOE OSTI2022

Silver Nanoparticles Functionalized Nanosilica Grown over Graphene Oxide for Enhancing Antibacterial Effect

The continuous growth of multidrug-resistant bacteria due to the overuse of antibiotics and antibacterial agents poses a threat to human health. Silver nanoparticles, silica-based materials, and graphene-based materials have become potential antibacterial candidates. In this study, we developed an effective method of enhancing the antibacterial property of graphene oxide (GO) by growing nanosilica (NS) of approximately 50 nm on the graphene oxide (GO) surface. The structures and compositions of the materials were characterized through powdered X-ray diffraction (P-XRD), transmission electron microscopy (TEM), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS), ultraviolet–visible spectroscopy (UV–VIS), dynamic light scattering (DLS), Raman spectroscopy (RM), Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmet–Teller (BET) surface area, and pore size determination. The silver nanoparticles (AgNPs) with an average diameter of 26 nm were functionalized on the nanosilica (NS) surface. The composite contained approximately 3% of silver nanoparticles. The silver nanoparticles on nanosilica supported over graphene oxide (GO/NS/AgNPs) exhibited a 7-log reduction of Escherichia coli and a 5.2-log reduction of Bacillus subtilis within one hour of exposure. Both GO/NS and GO/NS/AgNPs exhibited substantial antimicrobial effects against E. coli and B. subtilis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Transformation of Ferrihydrite to Goethite and the Fate of Plutonium

Understanding the interactions between plutonium and iron (oxy)hydroxide minerals is necessary to gain a predictive understanding of plutonium environmental mobility and to evaluate long-term performance of nuclear waste repositories. We investigated the fate of plutonium during the formation of ferrihydrite and its subsequent transformation into goethite. Ferrihydrite was synthesized with varying quantities of Pu(IV) following either a sorption or coprecipitation process; the ferrihydrite was then aged hydrothermally to yield goethite. Additionally, the synthesized materials were characterized via extended X-ray absorption fine structure spectroscopy, transmission electron microscopy, and acid leaching to elucidate the nature of plutonium association with ferrihydrite and goethite. In samples prepared following the sorption method, plutonium was identified in two different forms: a PuO 2 precipitate and a surface-sorbed plutonium complex. For the samples prepared via coprecipitation, no PuO 2 formation occurs in the ferrihydrite precursor and in the goethite experiments where plutonium concentration is ≤1000 ppm (mg kg –1 ). In these coprecipitation products, plutonium is strongly bound to the minerals either via formation of an inner sphere complex, or via an incorporation process. In the coprecipitation experiments, PuO 2 formation only occurs at the highest plutonium concentration (3000 ppm), suggesting that during ferrihydrite transformation into goethite, part of the plutonium can be remobilized to form PuO 2 nanoparticles. Collectively, our results demonstrate that the nature of plutonium associated with the precursor ferrihydrite (adsorbed vs coprecipitated) will have a direct impact on the association of plutonium with its alteration product (goethite). Furthermore, the data illustrate that some properties of plutonium association with the precursor ferrihydrite are retained through the transformation into goethite. These findings show that plutonium strongly associates with iron (oxy)hydroxides formed through coprecipitation processes and in these materials, plutonium can be strongly retained by the iron minerals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Revisiting spin ice physics in the ferromagnetic Ising pyrochlore Pr 2 Sn 2 O 7

Pyrochlore materials are characterized by their hallmark network of corner-sharing rare-earth tetrahedra, which can produce a wide array of complex magnetic ground states. Ferromagnetic Ising pyrochlores often obey the “two-in-two-out” spin ice rules, which can lead to a highly degenerate spin structure. Large moment systems, such as Ho 2 Ti 2 O 7 and Dy 2 Ti 2 O 7 , tend to host a classical spin ice state with low-temperature spin freezing and emergent magnetic monopoles. Systems with smaller effective moments, such as Pr 3+ -based pyrochlores, have been proposed as excellent candidates for hosting a “quantum spin ice” characterized by entanglement and a slew of exotic quasiparticle excitations. However, experimental evidence for a quantum spin ice state has remained elusive. Here, in this work, we show that the low-temperature magnetic properties of Pr 2 Sn 2 O 7 satisfy several important criteria for continued consideration as a quantum spin ice. We find that Pr 2 Sn 2 O 7 exhibits two distinct spin-correlation time scales of τ ≥ 10 –4 and ~10 –10 s in the spin ice regime. Our comprehensive bulk characterization and neutron scattering measurements enable us to map out the magnetic field-temperature phase diagram, producing results consistent with expectations for a ferromagnetic Ising pyrochlore. We identify key hallmarks of spin ice physics and show that the application of small magnetic fields (μ 0 H c ~0.5 T) suppresses the spin ice state and induces a field-polarized, ordered spin-ice phase. Together, our work clarifies the current state of Pr 2 Sn 2 O 7 and encourages future studies aimed at exploring the potential for a quantum spin ice ground state in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nucleation and Initial Stages of Growth during the Atomic Layer Deposition of Titanium Oxide on Mesoporous Silica

A chemical approach to the deposition of thin films on solid surfaces is highly desirable but prone to affect the final properties of the film. To better understand the origin of these complications, the initial stages of the atomic layer deposition of titania films on silica mesoporous materials were characterized. Adsorption-desorption measurements indicated that the films grow in a layer-by-layer fashion, as desired, but initially exhibit surprisingly low densities, about one-quarter of that of bulk titanium oxide. Electron microscopy, X-ray diffraction, UV/visible, and X-ray absorption spectroscopy data pointed to the amorphous nature of the first monolayers, and EXAFS and 29 Si CP/MAS NMR results to an initial growth via the formation of individual tetrahedral Ti-oxide units on isolated Si-OH surface groups with unusually long Ti-O bonds. Here, density functional theory calculations were used to propose a mechanism where the film growth starts at the nucleation centers to form an open 2D structure.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Segmented Gamma Scanner for Radioactive Waste Assessment: A User Guide

Radioactive waste assessment is important for ensuring nuclear material security at various types of facilities, such as enrichment, fuel fabrication, and reprocessing plants. The waste generated at such nuclear facilities is stored in standard containers and is required to be characterized for material-accounting purposes. The segmented gamma scanner system is a popular, nondestructive analysis measurement system used for characterizing nuclear material, including radioactive waste. This document provides guidance on how to achieve effective performance from a segmented gamma scanner system for accurately quantifying fission products, activation products, and transuranic wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Characterization of mechanical deformation in aluminum by optical second harmonic generation

Second harmonic generation (SHG), a laser-based surface technique, was used to characterize near-surface defect evolution associated with mechanical deformation in 2024-T3 aluminum due to tensile loads. Electron backscatter diffraction (EBSD) measurements were also performed to determine the geometrically necessary dislocation density before and after tensile deformation. Comparison of the EBSD and SHG results found that dislocation density and SHG signal are inversely proportional; tensile deformation in the plastic regime led to an increase in dislocation density and a decrease in SHG response. A similar trend was seen in the SHG results on as-received (unpolished) Al samples; SHG response decreases with extent of plastic deformation. Furthermore, this study suggests that SHG has potential as a nondestructive evaluation technique.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Plasmonic Ag nanocomposite phosphate glasses produced via γ-ray irradiation as reduction route

This paper reports on the impact of γ-ray irradiation (10, 100 kGy) on melt-quenched Ag + -doped phosphate glass and the effects of subsequent thermal processing leading to the production of plasmonic Ag nanocomposites. The γ-irradiated glasses were characterized alongside the pristine by differential scanning calorimetry (DSC), Raman spectroscopy, electron paramagnetic resonance (EPR) spectroscopy, optical absorption, and photoluminescence (PL) spectroscopy. DSC characterization showed consistent glass transition temperatures (T g ) before and after γ-irradiation whereas the crystallization temperatures tended to decrease with increasing γ-ray dose. However, a lack of alteration of the glass network structure was supported by Raman spectroscopy. Room temperature EPR spectra clearly showed the formation of phosphorus oxygen hole center (POHC) defects in the undoped host, in addition to another doublet likely associated with a P 3 defect. The presence of paramagnetic silver species encompassing Ag 2+ and 107/109 Ag 0 atoms was also indicated in the silver-activated glass together with POHC defects. Optical absorption spectra were also consistent with the presence of various radiation-induced centers. Further analyzing the glass absorption edge via Tauc plots suggested the formation of electron center (EC) defects in γ-irradiated samples wherein the silver-doped glass exhibited decreasing band gap energies with increasing γ-ray dose. The PL characterization showed the silver-related radio-PL effect was induced exhibiting broad band emission with two maxima around 500 and 625 nm stemming from various molecular Ag$^{x+}_{n}$ clusters. Emission decay analyses revealed that the longer wavelength emission exhibited slower decay. The highest radiation dose of 100 kGy however resulted in weaker emission and faster decay kinetics attributed to energy transfer between the luminescent silver species and POHC defects. Finally subjecting the γ-irradiated Ag-doped glasses to heat treatment near the T g at 490 °C led to the development of the surface plasmon resonance of Ag nanoparticles (NPs) and the vanishing of the Ag$^{x+}_{n}$ clusters luminescence. In conclusion, the presence of the matrix-related EC defects was deemed accountable for the thermally induced reduction and consequent precipitation of Ag NPs making the plasmonic glasses attractive for photonic applications such as nonlinear optics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis and Lithium Storage Properties of Spinel (Al 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 High-Entropy Oxide

High-entropy oxides (HEOs) have garnered significant interest as next-generation anode materials for lithium-ion batteries (LIBs) due to their high theoretical specific capacity and excellent structural stability. This study successfully synthesized spinel-structured (Al 0.2 Mn 0.2 Co 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 HEO via a sol–gel method. The material was characterized by XRD, Raman and TEM, confirming a homogeneous single-phase spinel structure, with uniformly distributed elements-a hallmark of HEOs. Electrochemical tests demonstrated a stable cycling performance (438 mAh g −1 at 100 mA g −1 after 100 cycles and 350 mAh g −1 at 1 A g −1 after 1000 cycles) and rate capacity of 159 mAh g −1 at 2 A g −1 , The remarkable long-term cyclability and good rate capability highlight the potential of this HEO for practical applications in durable, high-power lithium-ion batteries. This work underscores the advantage of incorporating structurally stabilizing elements in HEOs for advanced energy storage.

anode materials↗
DOE OSTI2021

Unraveling the Origin of Photocatalytic Deactivation in CeO 2 /Nb 2 O 5 Heterostructure Systems during Methanol Oxidation: Insight into the Role of Cerium Species

The study provides deep insight into the origin of photocatalytic deactivation of Nb 2 O 5 after modification with ceria. Of particular interest was to fully understand the role of ceria species in diminishing the photocatalytic performance of CeO 2 /Nb 2 O 5 heterostructures. For this purpose, ceria was loaded on niobia surfaces by wet impregnation. The as-prepared materials were characterized by powder X-ray diffraction, nitrogen physisorption, UV-visible spectroscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and photoluminescence measurements. Photocatalytic activity of parent metal oxides (i.e., Nb 2 O 5 and CeO 2 ) and as-prepared CeO 2 / Nb 2 O 5 heterostructures with different ceria loadings were tested in methanol photooxidation, a model gas-phase reaction. Deep insight into the photocatalytic process provided by operando-IR techniques combined with results of photoluminescence studies revealed that deactivation of CeO 2 /Nb 2 O 5 heterostructures resulted from increased recombination of photo-excited electrons and holes. The main factor contributing to more efficient recombination of the charge carriers in the heterostructures was the ultrafine size of the ceria species. The presence of such highly dispersed ceria species on the niobia surface provided a strong interface between these two semiconductors, enabling efficient charge transfer from Nb 2 O 5 to CeO 2 . However, the ceria species supported on niobia exhibited a high defect site concentration, which acted as highly active recombination centers for the photo-induced charge carriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗