Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magnetic diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Effect of sintering treatment on structural and magnetic properties of Ni{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} ferrites

Two sets of Ni{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} ferrites were synthesized using sol-gel method. Both the samples were heat treated at different temperatures. The effect of sintering treatment analyzed on structural and magnetic properties. X-ray diffraction (XRD) and scanning electron microscope (SEM) were used for structural analysis. Alternating gradient magnetometer (AGM) is used for magnetic measurements. In structural analysis, grains size is calculated using Debye - Scherrer’s formula and Williamson-Hall (W-H) plot. From both the techniques, grain size is found nearly same and increased in size with increase sintering temperature. Increased particle size is confirmed from SEM micrographs. Strain value is calculated from intercept of W-H plot. In both the samples, compressive strain in nature is found. Magnetic properties were also varying under different heat treatment. The change in magnetic properties with change in structural change at different sintering treatment is discussed in this report.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the hydrolytic degradation of UF 4 in humid air

This manuscript describes the chemical transformations that occur during hydrolysis of uranium tetrafluoride (UF 4 ) due to its storage in humid air (85% and 50% relative humidity) at ambient temperatures. This hydrolysis was previously reported to proceed slowly or not at all (depending on the percent relative humidity); however, previous reports relied primarily on X-ray diffraction methods to probe uranium speciation. Here, we employ a battery of physiochemical probing techniques to explore potential hydrolysis, including Raman spectroscopy, powder X-ray diffraction, 19 F nuclear magnetic resonance spectroscopy, scanning electron microscopy, and focused ion beam microscopy with energy-dispersive X-ray spectroscopy. Of these, only Raman spectroscopy proved to be particularly useful at observing chemical changes to UF 4 . It was found that anhydrous UF 4 slightly oxidizes over the course of thirteen days to Schoepite-like uranium complexes and possibly UO 3 . In contrast, UF 4 exposed to 50% relative humidity slightly decomposes into UO 2 F 2 , Schoepite-like uranium complexes, and possibly a high order uranium oxide that eluded chemical assignment (U x O y ). Despite the rich chemical speciation observed in our Raman spectroscopy measurements, X-ray diffraction and 19 F NMR measurements on the same material showed no changes. Microscopy measurements suggest that the observed reactions between UF 4 and water occur primarily on the surface of UF 4 particulates via a method that is visually similar to surface corrosion of metals. Therefore, we postulate that NMR spectroscopy and X-ray diffraction, which are well-suited for bulk analysis, are less suited than Raman spectroscopy to observe the surface-based reactions that occur to UF 4 when exposed to humid air. Considering the importance of UF 4 in the production of nuclear fuel and weapons, the results presented herein are widely applicable to numerous nuclear science fields where uranium detection and speciation in humid environments is of value, including nuclear nonproliferation and nuclear forensics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning of magnetic transition temperatures in nanoparticles of CoCr{sub 2}O{sub 4} multiferroic by B-site mixing

Highlights: • Pure CoCr{sub 2−x}Fe{sub x}O{sub 4} (x = 0.1 and 0.2) nanoparticles of 16–20 and 6–10 nm show enhancement of T{sub c} from 100 to 110 K and T{sub s} from 18 K to 36 K with increasing Fe. • The theoretical variation of reciprocal susceptibility with temperature in paramagnetic region using the function χ{sup −1} = T/C + 1/χ{sub 0} – b/(T − θ) is fitted with the experimental data. • The difference in ferrimagnetic Curie point, θ{sub f} and paramagnetic Curie point, θ{sub p} is 30 K and 7 K respectively for sample x = 0.1 and 0.2 indicating a sharp ferri- to para-magnetic transition in the former one. - Abstract: Pure CoCr{sub 2−x}Fe{sub x}O{sub 4} nanoparticles synthesized through conventional coprecipitation technique show particle size distribution in the range of 16–20 and 6–10 nm for x = 0.1 and 0.2 respectively. Magnetic and specific heat measurements show an enhancement of paramagnetic to collinear ferrimagnetic transition temperature, T{sub c} from 100 to 110 K and to a short range non-collinear spiral ordering, T{sub s} from 18 to 36 K with increasing x from 0.1 to 0.2 respectively. In addition, a strong disagreement between the paramagnetic moment obtained from the fitting of χ{sup −1} = T/C + 1/χ{sub 0} – b/(T − θ) and ferrimagnetic moment measured from the M vs. H loop at 10 K corroborates the nonsaturation behavior of magnetization at 50–100 kOe field and an order of magnitude higher coercivity (H{sub c}). The enhancement of T{sub c} and T{sub s} with increasing Fe concentration is attributed to an intrinsic change in non-collinear to collinear spin structure and strong J{sub A–B} interaction.

36 MATERIALS SCIENCE↗

Magnetization distribution in Cu 0.6 Mn 2.4 Ge 2 ferromagnet from polarized and non-polarized neutron powder diffraction aided by density-functional theory calculations

The crystal structure and magnetic properties of Cu 0.6 Mn 2.4 Ge 2 have been re-investigated by a combination of extensive magnetic measurements and neutron scattering experiments, aided by electronic structure calculations. The material is found to be a soft ferromagnet with the ordering temperature T C = 316 K. The magnetocaloric effect evaluated from field-dependent magnetization isotherms is equal to 1.2 J/(kg·K) and 2.5 J/(kg·K) under the maximum applied magnetic field of 2 T and 5 T, respectively. The compound crystallizes in the hexagonal space group P6 3 /mmc. A complex structural disorder necessitated testing of several disorder models against the results of non-polarized and polarized neutron scattering experiments and magnetization measurements. Simulations at the density-functional theory level were also performed to identify the most robust solution that properly described the data observed. The final magnetic structure model reveals non-equal magnetic moments on the Mn1 and Mn2 atoms (2.29(9) µ B and 2.7(1) µ B , respectively) and the presence of vacancies and minor Cu substitution defects in both Mn sites. The work demonstrates how the non-polarized and polarized neutron scattering methods can be combined with electronic structure calculations to establish the microscopic structure of magnetic materials with complex crystallographic disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic transformations in the Sr{sub 0.78}Y{sub 0.22}Co{sub 1-x}Fe{sub x}O{sub 3-{gamma}} system with a perovskite structure

The Sr{sub 0.78}Y{sub 0.22}Co{sub 1-x}Fe{sub x}O{sub 3-{gamma}} cobaltite system is studied by neutron and X-ray diffraction and by measuring the magnetization and elastic properties. The crystal structure of the composition with x = 0 is described in terms of the monoclinic space group A2/m with the unit cell 2 {radical}2a{sub p} x 4a{sub p} x 2 {radical}2a{sub p}, and the crystal structure of the composition with x = 0.12 is orthorhombic (space group Imma). The crystal structure of these compounds is characterized by alternating CoO{sub 6} and CoO{sub 4.5} layers. The magnetic structure is a G-type antiferromagnetic structure. The magnetic moments in the CoO{sub 6} layers are significantly higher than those in the CoO{sub 4.5} layers. In the compound with x = 0, magnetic measurements reveal a small ferromagnetic component (0.2 {mu}{sub B}/Co) below T{sub N} {approx} 350 K. Near T{sub N}, a phase transformation occurs and lowers the crystallographic symmetry. Doping with iron ions suppresses the ferromagnetic component and sharply increases the average magnetic moments in both layers. The spontaneous magnetization is assumed to result from noncollinear magnetic moments, which can be caused by the competition of exchange interactions of different signs and magnetic anisotropy. The compounds with x = 0.5 and 1.0 are cubic (space group Pm3m) and are characterized by a G-type collinear antiferromagnetic structure.

36 MATERIALS SCIENCE↗

New anisotropic MnBi permanent magnets by field-annealing of compacted melt-spun alloys modified with Mg and Sb

A technique has been designed for manufacturing rare-earth-free MnBi-based magnets capable of filling the existing "gap" between the ferrite and rare-earth permanent magnets. Whereas the earlier approaches relied on sintering of fine and easily degrading single-crystal MnBi particles, the new method achieves refinement of the key α-MnBi phase through melt-spinning combined with appropriate alloying. Modification of the MnBi alloys with Mg and Sb generates a high-coercivity nanostructure of the metastable β' phase. A subsequent compaction at 150 °C produces fully dense materials while converting the β' phase into the stable α phase. Lastly, a short annealing at 265–300 °C in a magnetic field of 3 T increases the fraction of the α phase to 97–98% and aligns the c axes of the α crystallites. A maximum energy product (BH) max of 11.5 MGOe and an intrinsic coercivity Hc of 5.6 kOe have been obtained in a magnet with the nominal composition Mn 50 Bi 46.5 Mg 3 Sb 0.5 . Because the coercivity increases with temperature, the maximum energy product of this magnet is still as high as 8.9 MGOe at 175 °C. Increasing the Sb content to 1.5 at.% increases the H c to 9.3 kOe, but at the same time inhibits the development of the texture thus decreasing the (BH) max . The addition of Mg was found to increase the c lattice parameter of the α phase resulting in an unusually large ratio c/a ≈1.432.

36 MATERIALS SCIENCE↗

Uniaxial Linear Resistivity of Superconducting La1.905Ba0.095CuO4 Induced by an External Magnetic Field

We present an experimental study of the anisotropic resistivity of superconducting La{sub 2-x}Ba{sub x}CuO{sub 4} with x = 0.095 and transition temperature T{sub c}=32 K. In a magnetic field perpendicular to the CuO{sub 2} layers H{perpendicular}, we observe that the resistivity perpendicular to the layers {rho}{perpendicular} becomes finite at a temperature consistent with previous studies on very similar materials; however, the onset of finite parallel resistivity {rho}{parallel} occurs at a much higher temperature. This behavior contradicts conventional theory, which predicts that {rho}{perpendicular} and {rho}{parallel} should become finite at the same temperature. Voltage versus current measurements near the threshold of voltage detectability indicate linear behavior perpendicular to the layers, becoming nonlinear at higher currents, while the behavior is nonlinear from the onset parallel to the layers. These results, in the presence of moderate H{perpendicular}, appear consistent with superconducting order parallel to the layers with voltage fluctuations between the layers due to thermal noise. In search of uncommon effects that might help to explain this behavior, we have performed diffraction measurements that provide evidence for H{perpendicular}-induced charge- and spin-stripe order. The field-induced decoupling of superconducting layers is similar to the decoupled phase observed previously in La{sub 2-x}Ba{sub x}CuO{sub 4} with x=1/8 in zero field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reconciling monolayer and bilayer Jeff = 1/2 square lattices in hybrid oxide superlattice

The number of atomic layers confined in a two-dimensional structure is crucial for the electronic and magnetic properties. Single-layer and bilayer J eff = 1/2 square lattices are well-known examples where the presence of the extra layer turns the XY anisotropy to the c-axis anisotropy. We report on experimental realization of a hybrid SrIrO 3 /SrTiO 3 superlattice that integrates monolayer and bilayer square lattices in one layered structure. By synchrotron x-ray diffraction, resonant x-ray magnetic scattering, magnetization, and resistivity measurements, we found that the hybrid superlattice exhibits properties that are distinct from both the single-layer and bilayer systems and cannot be explained by a simple addition of them. In particular, the entire hybrid superlattice orders simultaneously through a single antiferromagnetic transition at temperatures similar to the bilayer system but with all the J eff = 1/2 moments mainly pointing in the ab plane similar to the single-layer system. The results show that bringing monolayer and bilayer with orthogonal properties in proximity to each other in a hybrid superlattice structure is a powerful way to stabilize a unique state not obtainable in a uniform structure.

2-dimensional systems↗

Magnetic, transport, and magnetocaloric properties of boron doped Ni-Mn-In alloys

The impact of B substitution in Ni{sub 50}Mn{sub 35}In{sub 15−x}B{sub x} Heusler alloys on the structural, magnetic, transport, and parameters of the magnetocaloric effect (MCE) has been studied by means of room-temperature X-ray diffraction and thermomagnetic measurements (in magnetic fields (H) up to 5 T, and in the temperature interval 5–400 K). Direct adiabatic temperature change (ΔT{sub AD}) measurements have been carried out for an applied magnetic field change of 1.8 T. The transition temperatures (T-x) phase diagram has been constructed for H = 0.005 T. The MCE parameters were found to be comparable to those observed in other MCE materials such as Ni{sub 50}Mn{sub 34.8}In{sub 14.2}B and Ni{sub 50}Mn{sub 35}In{sub 14}X (X=In, Al, and Ge) Heusler alloys. The maximum absolute value of ΔT{sub AD} = 2.5 K was observed at the magnetostructural transition for Ni{sub 50}Mn{sub 35}In{sub 14.5}B{sub 0.5}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scattering theory and the Aharonov-Bohm effect in quasiclassical physics

Research Highlights: > Scattering Aharonov-Bohm effect. > Short-wavelength limit of scattered nonrelativistic particles. > Fraunhofer diffraction in the forward direction. > Fresnel diffraction in the forward region in conical space. > Enclosed magnetic flux is a gate for the propagation of quasiclassical particles. - Abstract: Scattering of a nonrelativistic quantum-mechanical particle by an impenetrable magnetic vortex is considered. The nonvanishing transverse size of the vortex is taken into account, and the limit of short, as compared to this size, wavelengths of the scattered particle is analyzed. We show that the scattering Aharonov-Bohm effect persists in the quasiclassical limit owing to the diffraction persisting in the short-wavelength limit. As a result, the vortex flux serves as a gate for the propagation of short-wavelength, almost classical, particles. This quasiclassical effect is more feasible to experimental detection in the case when space outside the vortex is conical.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of Iron Content on Microstructure and Magnetic Properties of Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n(Fe{sub 2}O{sub 3})Co{sub 0.4}

In this work, the hexagonal ferrite Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n (Fe{sub 2}O{sub 3})Co{sub 0.4}, where n ranging from 5.5 to 6.0 with a step of 0.1, and magnetic powders and magnets were synthesized by solid-states reaction. The microstructure of the magnetic powders was investigated by X-ray diffraction (XRD). And then we can found that a single magnetoplumbite phase is obtained for magnetic powders as a result when 5.6 ≤ n ≤ 5.8. When the iron content in the magnetic powders increased continuously, the diffraction peaks of α-Fe{sub 2}O{sub 3} were observed. Scanning electron microcopy (SEM) was used to explore the micrographs of the magnets and the hexagonal-shaped crystals were found obviously. The magnetic properties of the M-type hexagonal ferrites Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n(Fe{sub 2}O{sub 3})Co{sub 0.4} were studied by using vibrating sample magnetometry. The saturation magnetization (M{sub s}) first increased and then began to decrease with the n increasing. While the coercivity first decreased with the n from 5.5 to 5.9 and then increased when n ≥5.9. The coercivity (H{sub c}) of the hexagonal ferrite Sr{sub 0.3}La{sub 0.4}Ca{sub 0.3}n(Fe{sub 2}O{sub 3})Co{sub 0.4} reaches the maximum value (H{sub c} = 1130 Oe) when the iron content (n = 5.5).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detecting low concentrations of plutonium hydride with magnetization measurements

We report the formation of plutonium hydride in 2 at. % Ga-stabilized δ-Pu, with 1 at. % H charging. We show that magnetization measurements are a sensitive, quantitative measure of ferromagnetic plutonium hydride against the nonmagnetic background of plutonium. It was previously shown that at low hydrogen concentrations, hydrogen forms super-abundant vacancy complexes with plutonium, resulting in a bulk lattice contraction. Here, we use magnetization, X-ray, and neutron diffraction measurements to show that in addition to forming vacancy complexes, at least 30% of the H atoms bond with Pu to precipitate PuH{sub x} on the surface of the sample with x ∼ 1.9. We observe magnetic hysteresis loops below 40 K with magnetic remanence, consistent with ferromagnetic PuH{sub 1.9}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inducing Ferrimagnetic Exchange in 1D-FeSe 2 Chains Using Heteroleptic Amine Complexes: [Fe(en)(tren)][FeSe 2 ] 2

[Fe(en)(tren)][FeSe 2 ] 2 (en = ethylenediamine, C 2 H 8 N 2 , tren = tris(2-aminoethyl)amine, C 6 H 18 N 4 ) has been synthesized by a mixed-ligand solvothermal method. Its crystal structure contains heteroleptic [Fe(en)(tren)] 2+ complexes with distorted octahedral coordination, incorporated between 1D-FeSe 2 chains composed of edge–sharing FeSe 4 tetrahedra. The twisted octahedral coordination environment of the Fe–amine complex leads to partial dimerization of Fe–Fe distances in the FeSe 2 chains so that the FeSe 4 polyhedra deviate strongly from the regular tetrahedral geometry. 57 Fe Mössbauer spectroscopy reveals oxidation states of +3 for the Fe chain atoms and +2 for the Fe complex atoms. The close proximity of Fe atoms in the chains promotes ferromagnetic nearest neighbor interactions, as indicated by a positive Weiss constant, θ = +53.8(6) K, derived from the Curie–Weiss fitting. Magnetometry and heat capacity reveal two consecutive magnetic transitions below 10 K. DFT calculations suggest that the ordering observed at 4 K is due to antiferromagnetic intrachain interactions in the 1D-FeSe 2 chains. The combination of two different ligands creates an asymmetric coordination environment that induces changes in the structure of the Fe–Se fragments. Finally, this synthetic strategy opens new ways to explore the effects of ligand field strength on the structure of both Fe-amine complexes and surrounding Fe–Se chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High field X-ray diffraction measurements of Mn{sub 2}Sb{sub 0.95}Ge{sub 0.05}

Magnetization and high-field X-ray powder diffraction measurements were performed for Mn{sub 2}Sb{sub 0.95}Ge{sub 0.05} with a tetragonal structure in magnetic fields up to 5 T in the 10-300 K temperature range. For B = 0 T and 5 T, a first-order magnetic transition from a ferrimagnetic (FRI) to an antiferromagnetic (AFM) state occurred at T{sub t} ∼ 180 K and 150 K, respectively, and were accompanied by an iso-structural transformation. For this transition from the AFM to FRI state, the lattice parameters a and c changed by |Δa/a| = 0.15% and by |Δc/c| = 0.47% at 180 K. The compound showed both metamagnetic transition from the AFM to FRI state with a hysteresis at the temperature just below T{sub t} and magnetic field-induced iso-structural transformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Competing magnetic ground states in nonsuperconducting Ba(Fe1-xCrx)2As2 as seen via neutron diffraction

We present neutron diffraction measurements on single-crystal samples of nonsuperconducting Ba(Fe{sub 1-x}Cr{sub x}){sub 2}As{sub 2} as a function of Cr doping for 0 {le} x {le} 0.47. The average spin-density-wave moment is independent of concentration for x {le} 0.2 and decreases rapidly for x {ge} 0.3. For concentrations in excess of 30% chromium, we find a new competing magnetic phase consistent with G-type antiferromagnetism which rapidly becomes the dominant magnetic ground state. Strong magnetism is observed for all concentrations measured, naturally explaining the absence of superconductivity in the Cr-doped materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gadolinia nanofibers as a multimodal bioimaging and potential radiation therapy agent

Continuous bead-free C-type cubic gadolinium oxide (Gd{sub 2}O{sub 3}) nanofibers 20-30 μm long and 40-100 nm in diameter were sintered by sol-gel calcination assisted electrospinning technique. Dipole-dipole interaction of neighboring Gd{sup 3+} ions in nanofibers with large length-to-diameter aspect ratio results in some kind of superparamagnetic behavior: fibers are magnetized twice stronger than Gd{sub 2}O{sub 3} powder. Being compared with commercial Gd-DTPA/Magnevist{sup ®}, Gd{sub 2}O{sub 3} diethyleneglycol-coated (Gd{sub 2}O{sub 3}-DEG) fibers show high 1/T{sub 1} and 1/T{sub 2} proton relaxivities. Intense room temperature photoluminescence, high NMR relaxivity and high neutron scattering cross-section of {sup 157}Gd nucleus promise to integrate Gd{sub 2}O{sub 3} fibers for multimodal bioimaging and neutron capture therapy.

36 MATERIALS SCIENCE↗

Toward a better understanding of the magnetocaloric effect: An experimental and theoretical study of MnFe{sub 4}Si{sub 3}

The intermetallic compound MnFe{sub 4}Si{sub 3} has been studied by high-resolution Time of Flight (TOF) neutron powder diffraction. MnFe{sub 4}Si{sub 3} crystallizes in the hexagonal space group P6{sub 3}/mcm with lattice constants of a=b=6.8043(4) Å and c=4.7254(2) Å at 310 K. Magnetic susceptibility measurements show clearly the magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. Magnetic structure refinements based on neutron powder diffraction data with and without external magnetic field reveal strong evidence on the origin of the large magnetocaloric effect (MCE) in this material as a partial reordering of the spins between ∼270 K and 300 K. In addition, electronic structure calculations using the self-consistent, spin-polarized Tight Binding-Linear MuffinTin Orbital (TB-LMTO) method were also accomplished to address the “coloring problem” (Mn/Fe site preference) as well as the unique ferromagnetic behavior of this intermetallic compound. - Graphical abstract: Theoretical and experimental reinvestigation of the magnetic structure of MnFe{sub 4}Si{sub 3} for a better understanding of its large magnetocaloric effect (MCE). - Highlights: • Strong magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. • MCE associated to a partial reordering of the spins between ∼270 K and 300 K. • DFT calculations show strong relation between MCE and spintronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of voltage-controlled magnetic anisotropy through precise control of Mg insertion thickness at CoFeB|MgO interface

We studied the impact of different insertion layers (Ta, Pt, and Mg) at the CoFeB|MgO interface on voltage-controlled magnetic anisotropy (VCMA) effect and other magnetic properties. Inserting a very thin Mg layer of 0.1–0.3 nm yielded a VCMA coefficient of 100 fJ/V-m, more than 3 times higher than the average values of around 30 fJ/V-m reported in Ta|CoFeB|MgO-based structures. Ta and Pt insertion layers also showed a small improvement, yielding VCMA coefficients around 40 fJ/V-m. Electrical, magnetic, and X-ray diffraction results reveal that a Mg insertion layer of around 1.2 nm gives rise to the highest perpendicular magnetic anisotropy, saturation magnetization, as well as the best CoFe and MgO crystallinity. Other Mg insertion thicknesses give rise to either under- or over-oxidation of the CoFe|MgO interface; a strong over-oxidation of the CoFe layer leads to the maximum VCMA effect. These results show that precise control over the Mg insertion thickness and CoFe oxidation level at the CoFeB|MgO interface is crucial for the development of electric-field-controlled perpendicular magnetic tunnel junctions with low write voltage.

36 MATERIALS SCIENCE↗