Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layered cathodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

On Proton Defects and the Phase Transformation of NiO 2

One approach to high-capacity Li-ion battery cathodes is to increase the Ni content. Unfortunately, Ni-rich materials undergo a phase transition and volume collapse at a high state of charge (SOC), which degrades battery performance. At a high SOC, NiO 2 undergoes a phase transition from the O 3 to the O 1 phase. The O 1 phase appears to be more thermodynamically stable than the O 3 phase. However, density functional theory (DFT) often predicts higher stability for O 3 , depending on the DFT approximation. The energy difference between the O 1 and O 3 phases is on the order of 10 meV/atom. Furthermore, we find that proton defects are more stable in the O 1 phase than in the O 3 phase by about 90 meV per proton. Defects in NiO 2 energetically favor the O 3 -O 1 phase transition observed in a high SOC in Li $x$ NiO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2014

Method for Making a Fuel Cell

The invention is a novel solid oxide fuel cell (SOFC) stack comprising individual bi-electrode supported fuel cells in which an electrolyte layer is supported between porous electrodes. The porous electrodes may be made from graded pore ceramic tape that has been created by the freeze cast method followed by freeze-drying. Each piece of graded pore tape later becomes a graded pore electrode scaffold that, subsequent to sintering, is made into either an anode or a cathode. The electrode scaffold comprising the anode includes a layer of liquid metal. The pores of the electrode scaffolds gradually increase in diameter as the layer extends away from the electrolyte layer. As a result of this diameter increase, any forces that would tend to pull the liquid metal away from the electrolyte are reduced while maintaining a diffusion path for the fuel. Advantageously, the fuel cell of the invention may utilize a hydrocarbon fuel without pre-processing to remove sulfur.

Cable, Thomas L.↗
DOE OSTI2023

Direct recycling of spent nickel-rich cathodes in reciprocal ternary molten salts

Lithium-ion batteries (LIBs) have revolutionized portable electronics and electric vehicles (EVs), but the growing accumulation of end-of-life (EOL) batteries poses environmental challenges. Recycling high-value cathodes from EOL LIBs can minimize waste and reduce the need for mining critical minerals. Here, this study focuses on the direct recycling of Ni-rich cathodes, particularly lithium-manganese-cobalt-oxide (NMC) 622 in a “reciprocal ternary molten salts (RTMS)" system. The ionothermal relithiation in the RTMS system successfully restores the layered structure, lithium content, and electrochemical performance of the NMC 622 cathode, comparable to the pristine material. The cost analysis reveals that cathode regeneration through ionothermal relithiation is more economical than virgin production or conventional recycling methods.

25 ENERGY STORAGE↗
DOE OSTI2021

Understanding Co roles towards developing Co-free Ni-rich cathodes for rechargeable batteries

Reduction on cobalt reliance is an urgent requirement in the development of sustainable cathode materials for Li-ion batteries. Here the authors analyse the roles of cobalt and its interplay with other ions in high-nickel layered oxides, and deduce a material formula for promising cobalt-free cathodes. Current bottlenecks in cobalt (Co) supply have negatively impacted commercial battery production and inspired the development of cathode materials that are less reliant on Co. However, complete Co elimination is prevented by the lack of fundamental understanding of the impact of Co on cathode capacity and structural stability, as well as the lack of effective substitute components in practice. Here we investigate the roles of Co in purposely designed systems that include both Co-rich and Mn-substituted Co-free cathodes. Our results affirmed that Co plays an undeniable role in fast capacity and/or structural degradation, and found that Co is more destructive than Ni at high potentials, which offers unexpected but encouraging perspectives for Co reduction. Moreover, Mn substitution effectively alleviates the destructive effects of Co and enables a high potential functionality. Finally, with these fundamental discoveries, we demonstrated a series of LiNi α Mn β X γ O 2 (X = single or multiple dopants) as a promising candidate for Co-free cathodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Enhancing Cycling Stability and Capacity Retention of NMC811 Cathodes by Reengineering Interfaces via Electrochemical Fluorination

High-capacity cathodes (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ) that can boost the energy density of lithium-ion batteries are promising candidates for vehicle electrification. However, several factors specific to high energy density materials entailing electrode reactions inhibit their application. Fluorination has shown a promising ability to combat the detrimental electrochemical performances of cathode materials, however, it remains difficult to achieve the desired functionality. In this work, a novel electrochemical fluorination (ECF) that demonstrates a promising electrochemical performance enhancement via stabilization of the cathode–electrolyte-interphase (CEI) by forming conformal LiF is proposed. Besides LiF surface layer formation, ECF reduces the degree of fluorination-induced Ni/Li disordering and enhances the layered structural stability as probed by X-ray diffraction. Because of the robust CEI, ECF-NMC811 cathodes deliver 203.0 mAh g -1 first discharge capacity at the current rate of C/10, with ≈98% capacity retention up to 100 cycles. Similarly, it delivers ≈180 mAh g -1 capacity at a 1 C rate with 86.4% capacity retention up to 200 cycles with average coulombic efficiency of > 99.5%. Comprehensive characterization with a multitude of probes reveals that ECF enhances the cycling stability of the electrode without altering bulk structure and morphology.

25 ENERGY STORAGE↗
DOE OSTI2020

Intercalation of Mg into a Few-Layer Phyllomanganate in Non-aqueous Electrolytes at Room Temperature

The use of oxide cathodes in Mg batteries would unlock a potential energy storage system that delivers high-energy density. However, poor kinetics of Mg diffusion in known solid oxide lattices strongly limits reversible intercalation, which motivates the sustained exploration of new candidates. Herein, nanocrystals of a few-layer phyllomanganate, reminiscent of the mineral vernadite, were shown to have considerable electrochemical activity toward Mg intercalation at room temperature, where it delivered similar to 190 mAh g- 1 at similar to 1.9 V (vs Mg/Mg 2+ ) in batteries paired with a Mg metal anode. Multimodal characterization confirmed the notable degree of reversible intercalation by probing the structural, compositional, and redox changes undertaken by the oxide. Distinct levels of Mg activity were also observed while varying the content of small amounts of lattice water and the temperature of the reaction. The results reaffirm the prospects for operational Mg batteries using oxide cathode in moderate conditions, overcoming current limits of performance of this prospective technology.

25 ENERGY STORAGE↗
DOE OSTI2023

The role of oxygen in automotive grade lithium-ion battery cathodes: an atomistic survey of ageing

The rising demand for high-performance lithium-ion batteries, pivotal to electric transportation, hinges on key materials like the Ni-rich layered oxide LiNi x Co y Al z O 2 (NCA) used in cathodes. The present study investigates the redox mechanisms, with particular focus on the role of oxygen in commercial NCA electrodes, both fresh and aged under various conditions (aged cells have performed >900 cycles until a cathode capacity retention of ~80%). Our findings reveal that oxygen participates in charge compensation during NCA delithiation, both through changes in transition metal (TM)–O bond hybridization and formation of partially reversible O 2 , the latter occurs already below 3.8 V vs. Li/Li + . Aged NCA material undergoes more significant changes in TM–O bond hybridization when cycling above 50% SoC, while reversible O 2 formation is maintained. Nickel is found to be redox active throughout the entire delithiation and shows a more classical oxidation state change during cycling with smaller changes in the Ni–O hybridization. By contrast, Co redox activity relies on a stronger change in Co–O hybridization, with only smaller Co oxidation state changes. The Ni–O bond displays an almost twice as large change in its bond length on cycling as the Co–O bond. The Ni–O 6 octahedra are similar in size to the Co–O 6 octahedra in the delithiated state, but are larger in the lithiated state, a size difference that increases with battery ageing. These contrasting redox activities are reflected directly in structural changes. The NCA material exhibits the formation of nanopores upon ageing, and a possible connection to oxygen redox activity is discussed. The difference in interaction of Ni and Co with oxygen provides a key understanding of the mechanism and the electrochemical instability of Ni-rich layered transition metal oxide electrodes. Our research specifically highlights the significance of the role of oxygen in the electrochemical performance of electric-vehicle-grade NCA electrodes, offering important insights for the creation of next-generation long-lived lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Lithium Feedstock Pathway: Coupled Electrochemical Saltwater Extraction and Direct Battery Materials Manufacturing

Lithium (Li) is one of the critical industrial materials and an indispensable component in manufacturing Li batteries. However, Li resource is limited and geographically uneven in earth’s crust and its mining is not sustainable due to the low efficiency and complicated separation and refining processes. In this work, we develop a one-step technology to electrochemically extract Li from low concentration solutions (brines, seawater or used Li-ion batteries) into a form to directly produce commercial battery materials, eliminating the costly Li separation/purification steps. By using this approach, Li was selectively extracted and converted into battery cathodes (e.g., spinel LiMn 2 O 4 and layered LiNi x Mn y Co z O 2 ) through heat treatment. With the importance of Li-ion batteries to the overall decarbonization strategy, the demonstration of a one-step Li-extraction to a ready-to-use material could expand the access to Li resources at a lower cost by eliminating processing steps.

25 ENERGY STORAGE↗
NASA NTRS1972

Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

Holleck, G. L.↗
DOE OSTI2023

Solvents and catalyst preparations for lithium-oxygen batteries

An electrochemical device includes a lithium anode having a red poly(benzonitrile) coating covering at least a portion of the anode; a separator and an air cathode comprising reduced graphene oxide over gas diffusion layer; and an electrolyte comprising an ether solvent, benzonitrile, and a lithium salt.

Wang, Hsien-Hau↗
DOE OSTI2024

Organic photovoltaic device having a lateral charge transport channel

Organic photovoltaic cells (OPVs) and their compositions are described herein. In one or more embodiments, the OPV or solar cell includes a first electrode (e.g., cathode); a second electrode (e.g., anode); an active layer positioned between the first electrode and the second electrode; and a channel layer positioned between the first electrode and the active layer, wherein the channel layer is configured to laterally disperse a charge across the channel layer. In certain examples, the first electrode is arranged in a grid structure having a plurality of electrode segments and a respective opening between adjacent segments of the first electrode.

Forrest, Stephen↗
DOE OSTI2024

Solvents and catalyst preparations for lithium-oxygen batteries

An electrochemical device includes a lithium anode having a red poly(benzonitrile) coating covering at least a portion of the anode; a separator and an air cathode comprising reduced graphene oxide over gas diffusion layer; and an electrolyte comprising an ether solvent, benzonitrile, and a lithium salt.

Wang, Hsien-Han↗
DOE OSTI2020

Experimental measurements of fuel and water crossover in an active DMFC

This work measured polarization curves as well as the high-frequency resistance of active direct methanol fuel cell (DMFC) operates at around 80 °C with active controls of temperature, methanol concentration, airflow rate, and relative humidity. The relative humidity of the air did not have noticeable impacts on the fuel cell unless the operating temperature was near the evaporation temperature of water (100 °C). The hydrophobic water management layer (WML) between the membrane electrode assembly (MEA) and cathode air channel increases the mass transfer resistance and improves the water retention in MEA. Adding a WML increased the peak power density, decreased the ohmic resistance, and improved the fuel efficiency of the fuel cell, especially when it operated near 100 °C. This study also quantitatively measured methanol and water crossover as well as the fuel efficiency at different operating currents. The fuel efficiency increased significantly with the increase of the current density. Using a hydrophobic fuel management layer (FML) between the anode fuel channel and MEA reduced the fuel and water crossover rates and increased the ohmic resistance due to the decrease of the water content of the Nafion membrane. The FML improved fuel efficiency by reducing the methanol crossover. The combination of the FML and WML enabled the steady operation of DMFC using highly concentrated methanol solutions (up to 75 wt%).

08 HYDROGEN↗
DOE OSTI2020

Thermodynamic and kinetic properties of layered-CaCo2O4 for the Ca-ion batteries: a systematic first-principles study

One of the more promising directions in multivalent energy storage is systems based on Ca ion intercalation due to the potential for high voltage and capacity. A major challenge for enabling such a battery is to find cathode materials capable of fast ionic diffusion and reversible insertion of Ca ions. Here, on the basis of first-principles calculations, we have demonstrated that layered CaCo 2 O 4 exhibits favorable thermodynamic and kinetic properties that should enable topotactic Ca ion intercalation reactions. The P3-type layered Ca x Co 2 O 4 (0 < x < 1) with either of space groups of P 1 or P 2 1 / m are stable at multiple Ca concentrations and show a smooth voltage plateau higher than 3 V up to X = 0.5. The energy barriers of the single Ca ion migration are as low as 0.36 eV and 0.27 eV at the dilute and high vacancy concentration limits, respectively. Therefore, although varying the vacancy environments of the diffusing atom influences the migration barriers, they do not exceed 0.6 eV. Stochastic analysis of Ca hopping events performed by ab initio molecular dynamics (AIMD) simulation has shown that the migration barriers are lower than 0.32 eV. Therefore, the Ca diffusivity at room temperature extrapolated from the AIMD results is comparable to Li diffusivity (>10 -10 cm 2 s -1 ) in conventional Li cathode materials, suggesting the feasibility of layered Ca x Co 2 O 4 as multivalent cathode materials. Finally, the structural factors that enable fast diffusion are discussed.

25 ENERGY STORAGE↗
DOE OSTI2022

Dual Passivation of Cathode and Anode through Electrode–Electrolyte Interface Engineering Enables Long-Lifespan Li Metal–SPAN Batteries

The reliability and durability of lithium metal (Li 0 )–sulfur batteries are largely limited by the undesired Li 0 plating-stripping irreversibility and the detrimental polysulfide dissolution, yet approaches that can simultaneously address the above anodic and cathodic problems are scarce. In this study, we report the stable operation of a Li 0 -SPAN (sulfurized polyacrylonitrile) battery via an anode–cathode dual-passivation approach. By combination of a fluorinated localized high concentration electrolyte (LHCE) and a Li 3 N-forming additive (TMS-N 3 ), robust and highly conductive electrode passivation layers are formed in situ on the surface of both the Li 0 anode and the SPAN cathode. The resulting highly reversible, dendrite-free, and high-density Li 0 plating morphology enables a high Coulombic efficiency of 99.4%. Advanced tender energy X-ray spectroscopy also reveals the eliminated Li 2 S formation and minimized polysulfide dissolution in SPAN cathodes, leading to a high capacity of 580 mAh/g SPAN and stable cycling with negligible capacity decay (0.7%) for 800 cycles. This electrode–electrolyte interphase engineering strategy has tackled the major limitations of Li–S batteries in both ether- and carbonate-based electrolyte systems and under a wide temperature range from –10 to +50 °C, thus providing insightful guidelines for the rational design of highly durable and high-energy-density Li 0 -S batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Essential effect of the electrolyte on the mechanical and chemical degradation of LiNi 0.8 Co 0.15 Al 0.05 O 2 cathodes upon long-term cycling

Capacity fading during long-term cycling (>1500×) is still a critical challenge for Li-ion batteries that use Ni-rich layered oxides, e.g. LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA), as the cathode. Microcracks have been previously recognized as one of the primary reasons for the observed capacity fade. Although there exists a generally developed mechanical understanding of microcracks, the role of the electrolyte has not been clearly understood, especially after extended cycling and at the atomic scale. Here, we unveil the microstructural evolution of spherical NCA secondary particles after long-term cycling using scanning transmission electron microscopy accompanied with electron energy loss spectroscopy. In this work, we found that the microcracks initiated and grew through grain boundaries, which then serve as the pathway for electrolyte penetration into secondary NCA particles. Additionally, the rock-salt phase reconstruction is prone to occur at the (003) surfaces of the primary particles or the crack surfaces, largely due to electrolyte (LiPF 6 EC/EMC) corrosion. Crack propagation within the NCA grains is primarily a joint consequence from electrolyte corrosion and mechanical strain during lithiation/delithiation. During extended cycling, due to the distinctive surface facets, the primary grains located in the center of the secondary particles experience more intensive electrolyte corrosion, leading to a reduced contact with nearby particles, impairing the overall capacity. These results establish the initiation and growth mechanism of microcracks and voids in NCA-based cathodes during cycling and point out the role of the electrolyte in affecting the degradation of NCA-based cathodes.

25 ENERGY STORAGE↗