Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “intercalation material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Electronic and chemical structure of an organic light emitter embedded in an inorganic wide-bandgap semiconductor: Photoelectron spectroscopy of layered and composite structures of Ir(BPA) and ZnSe

Luminescent organic phases embedded in conductive inorganic matrices are proposed for hybrid organic-inorganic light-emitting diodes. In this configuration, the organic dye acts as the radiative recombination site for charge carriers injected into the inorganic matrix. Our investigation is aimed at finding a material combination where the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the organic dye are situated in between the valence and conduction bands of the inorganic matrix in order to promote electron and hole transfer from the matrix to the dye. Bilayer and composite thin films of zinc selenide (ZnSe) and a red iridium complex (Ir(BPA)) organic light emitter were prepared in situ via UHV thermal evaporation technique. The electronic and atomic structures were studied applying X-ray and ultraviolet photoelectron spectroscopies. The measured energy band alignments for the ZnSe/Ir(BPA) bilayer and ZnSe+Ir(BPA) composite reveal that the HOMO and LUMO of the organic dye are positioned in the ZnSe bandgap. For the initial steps of ZnSe deposition on a dye film to form Ir(BPA)/ZnSe bilayers, zinc atoms intercalate into the dye film leaving behind an excess of selenium at the interface that partly reacts with dye molecules. Photoelectron spectroscopy of the composites shows the same species suggesting a similar mechanism. This mechanism leads to composite films with increased content of amorphous phases in the inorganic matrix, thereby affecting its conductivity, as well as to the presence of nonradiative recombination sites provided by the intercalated Zn atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Toward MBenes Battery Electrode Materials: Layered Molybdenum Borides for Li-Ion Batteries

Lithium-ion and sodium-ion batteries (LIBs and SIBs) are crucial in our shift toward sustainable technologies. In this work, the potential of layered boride materials (MoAlB and Mo 2 AlB 2 ) as novel, high-performance electrode materials for LIBs and SIBs, is explored. It is discovered that Mo 2 AlB 2 shows a higher specific capacity than MoAlB when used as an electrode material for LIBs, with a specific capacity of 593 mAh g -1 achieved after 500 cycles at 200 mA g -1 . It is also found that surface redox reactions are responsible for Li storage in Mo 2 AlB 2 , instead of intercalation or conversion. Moreover, the sodium hydroxide treatment of MoAlB leads to a porous morphology and higher specific capacities exceeding that of pristine MoAlB. When tested in SIBs, Mo 2 AlB 2 exhibits a specific capacity of 150 mAh g -1 at 20 mA g -1 . These findings suggest that layered borides have potential as electrode materials for both LIBs and SIBs, and highlight the importance of surface redox reactions in Li storage mechanisms.

25 ENERGY STORAGE↗

Reversible magnesium and aluminium ions insertion in cation-deficient anatase TiO 2

In contrast to monovalent lithium or sodium ions, the reversible insertion of multivalent ions such as Mg 2+ and Al 3+ into electrode materials remains an elusive goal. In this work, we demonstrate a new strategy to achieve reversible Mg 2+ and Al 3+ insertion in anatase TiO 2 , achieved through aliovalent doping, to introduce a large number of titanium vacancies that act as intercalation sites. We present a broad range of experimental and theoretical characterizations that show a preferential insertion of multivalent ions into titanium vacancies, allowing a much greater capacity to be obtained compared to pure TiO 2 . In conclusion, this result highlights the possibility to use the chemistry of defects to unlock the electrochemical activity of known materials providing a new strategy for the chemical design of materials for practical multivalent batteries.

25 ENERGY STORAGE↗

Microporous carbon derived from polyaniline base as anode material for lithium ion secondary battery

Highlights: {yields} Nitrogen-containing microporous carbon was prepared from polyaniline base by K{sub 2}CO{sub 3} activation, and used as anode material for lithium ion secondary battery. {yields} K{sub 2}CO{sub 3} activation promotes the formation of amorphous and microporous structure. {yields} High nitrogen content, and large surface area with micropores lead to strong intercalation between carbon and lithium ion, and thus improve the lithium storage capacity. -- Abstract: Microporous carbon with large surface area was prepared from polyaniline base using K{sub 2}CO{sub 3} as an activating agent. The physicochemical properties of the carbon were characterized by scanning electron microscope, X-ray diffraction, Brunauer-Emmett-Teller, elemental analyses and X-ray photoelectron spectroscopy measurement. The electrochemical properties of the microporous carbon as anode material in lithium ion secondary battery were evaluated. The first discharge capacity of the microporous carbon was 1108 mAh g{sup -1}, whose first charge capacity was 624 mAh g{sup -1}, with a coulombic efficiency of 56.3%. After 20 cycling tests, the microporous carbon retains a reversible capacity of 603 mAh g{sup -1} at a current density of 100 mA g{sup -1}. These results clearly demonstrated the potential role of microporous carbon as anode for high capacity lithium ion secondary battery.

36 MATERIALS SCIENCE↗

Lithium Electrochemical Tuning for Electrocatalysis

Abstract Electrocatalysis is of great importance to a variety of energy conversion processes, where developing highly efficient catalysts is critical. While common strategies involve screening a wide range of materials with new chemical compositions or structures, a different approach to continuously, controllably, and effectively tune the electronic properties of existing catalytic materials for optimized activities has been demonstrated recently. Inspired by studies in lithium‐ion batteries, systematical lithium electrochemical tuning (LiET) methods such as Li intercalation, extraction, cycling, and strain engineering, are employed to effectively tune the electronic structures of different existing catalysts and thus improve their catalytic activities dramatically. Herein, the advantages of the LiET method in electrocatalysis are introduced, and then some recent representative examples in improving the performances of important electrochemical reactions are reviewed briefly. Lastly, a few promising directions on extending the applications of the LiET method in electrocatalysis are proposed.

Lu, Zhiyi↗

Mesoporous MoS 2 as a Transition Metal Dichalcogenide Exhibiting Pseudocapacitive Li and Na-Ion Charge Storage

The ion insertion properties of MoS 2 continue to be of widespread interest for energy storage. While much of the current work on MoS 2 has been focused on the high capacity four-electron reduction reaction, this process is prone to poor reversibility. Traditional ion intercalation reactions are highlighted and it is demonstrated that ordered mesoporous thin films of MoS 2 can be utilized as a pseudocapacitive energy storage material with a specific capacity of 173 mAh g -1 for Li-ions and 118 mAh g -1 for Na-ions at 1 mV s -1 . Utilizing synchrotron grazing incidence X-ray diffraction techniques, fast electrochemical kinetics are correlated with the ordered porous structure and with an iso-oriented crystal structure. When Li-ions are utilized, the material can be charged and discharged in 20 seconds while still achieving a specific capacity of 140 mAh g -1 . Moreover, the nanoscale architecture of mesoporous MoS2 retains this level of lithium capacity for 10 000 cycles. A detailed electrochemical kinetic analysis indicates that energy storage for both ions in MoS 2 is due to a pseudocapacitive mechanism.

25 ENERGY STORAGE↗

Direct observation of MgO formation at cathode electrolyte interface of a spinel MgCo 2 O 4 cathode upon electrochemical Mg removal and insertion

Identifying a Mg 2+ insertion mechanism into Mg cathode is one crucial challenge of designing Mg batteries that own comparable specific energy to the lithium ion systems. Spinel Mg cathodes are attractive candidates mainly attributed to its high intercalation voltage and theoretical capacity, however, electrochemically removing Mg from its solid structure with identified capacity dedicated to actual reversible Mg intercalation introduce complications. Work presented here applies Scanning/Transmission Electron Microscopy with Energy Loss Spectroscopy and diffraction method to investigate the cathode electrolyte interface for a spinel MgCo 2 O 4 material electrochemically cycled in the presence of a non-aqueous, low water content Mg electrolyte. Findings at an atomic scale suggest a complete de-magnesiation is occurring for thin MgCo 2 O 4 particles upon electrochemical charging, but a vast majority of MgCo 2 O 4 shows formation of an amorphous MgO layer with a thickness of similar to ~10 nm at the cathode electrolyte interface. The amorphous MgO layer is directly jointed with the crystalline MgCo 2 O 4 at the outer edge of the cathode. Formation of MgO at the cathode electrolyte interface is believed to be the detrimental factor preventing further electrochemical cell cycling of MgCo 2 O 4 . A possible reaction pathway of intercalation-initiated surface conversion is proposed to explain reversible Mg insertion with MgCo 2 O 4 .

25 ENERGY STORAGE↗

Insertion of Ag atoms into layered MoO{sub 3} via a template route

Graphical abstract: PVP–Ag{sup +} complex self-assembled with inorganic (Mo{sub x}O{sub y}){sub ∞}{sup n−} chains into a layered hybrid, in which the PVP–Ag complex was intercalated between the (Mo{sub x}O{sub y}){sub ∞}{sup n−} layers. Calcinations of this hybrid at 500 °C lead to formation of Ag/MoO{sub 3} nanohybrid. By this method we have successfully inserted Ag atoms into the semiconductor MoO{sub 3} lattice. Display Omitted Highlights: ► We fabricated a PVP–Ag/polyoxomolybdate layered hybrid via in situ self-assembly. ► The PVP–Ag complex has been inserted between the molybdenum oxide layers. ► This layered hybrid transformed into Ag/MoO{sub 3} nanocomposite after calcinations. ► HR-TEM images show that Ag atoms of about 1 nm have been inserted in the MoO{sub 3} layers. -- Abstract: We report insertion of Ag atoms into layered MoO{sub 3} via an in situ template route. PVP–Ag{sup +} complex self-assembled with inorganic (Mo{sub x}O{sub y}){sub ∞}{sup n−} chains into a layered hybrid, in which the PVP–Ag complex was intercalated between the (Mo{sub x}O{sub y}){sub ∞}{sup n−} layers. Calcinations of this hybrid at 500 °C lead to formation of Ag/MoO{sub 3} hybrid, in which Ag nanoparticles of about 1 nm have been inserted between the MoO{sub 3} layers. By this method pillared MoO{sub 3} has been obtained very easily. We believe that this research opens new routes to fabricate novel intercalation compounds and metal/semiconductor nanohybrids via an efficient and green route.

36 MATERIALS SCIENCE↗

Preparation and lithium intercalation behavior of TiO{sub 2} in aqueous solutions

Highlights: • The poor crystalline anatase phase or amorphous TiO{sub 2} was prepared by TiCl{sub 4} hydrolysis under different pH conditions. • Phase transition behavior and lithium intercalation ability of the obtained TiO{sub 2} were found to be related to TiO{sub 2} property. • The results indicate that TiO{sub 2} products obtained from TiCl{sub 4} hydrolysis at lower pH are favorable for lithium intercalation. - Abstract: The low crystalline or amorphous TiO{sub 2} was prepared by TiCl{sub 4} hydrolysis in aqueous solutions under different pH conditions at 45 °C. The products obtained at lower pH (1.23–3.10) appear to be nano-sized particles with poor crystalline anatase structure and an uniform particle size distribution, while the product prepared at pH 4.10 presents in a poor crystalline anatase structure and the regular morphology starts to disappear, and the products obtained at higher pH (>6.00) are amorphous and irregular morphology. The hydrolysis products obtained at pH 2.60 and 8.80 were heat-treated at 300, 400, 600, 700 and 800 °C for 3 h, respectively, to figure out the phase transition. The differences in phase transition process were observed, which verified the properties difference. The lithium intercalation abilities of the obtained TiO{sub 2} were studied. The results indicated that the TiO{sub 2} obtained at lower pH are more favorable for lithium intercalation and are better precursors.

36 MATERIALS SCIENCE↗

Effect of Interlayer Spacing on the Activity of Layered Manganese Oxide Bilayer Catalysts for the Oxygen Evolution Reaction

We investigated the dependence of the electrocatalytic activity for the oxygen evolution reaction (OER) on the interlayer distance of five compositionally distinct layered manganese oxide nanostructures. Each individual electrocatalyst was assembled with a different alkali metal intercalated between two nanosheets (NS) of manganese oxide to form a bilayer structure. Manganese oxide NS were synthesized via the exfoliation of a layered material, birnessite. Atomic force microscopy was used to determine the heights of the bilayer catalysts. The interlayer spacing of the supported bilayers positively correlates with the size of the alkali cation: NS/Cs+/NS > NS/Rb+/NS > NS/K+/NS > NS/Na+/NS > NS/Li+/NS. The thermodynamic origins of these bilayer heights were investigated using molecular dynamics simulations. The overpotential (η) for the OER correlates with the interlayer spacing; NS/Cs+/NS has the lowest η (0.45 V), while NS/Li+/NS exhibits the highest η (0.68 V) for OER at a current density of 1 mA/cm2. Kinetic parameters (η and Tafel slope) associated with NS/Cs+/NS for the OER were superior to that of the bulk birnessite phase, highlighting the structural uniqueness of these nanoscale assemblies.

36 MATERIALS SCIENCE↗

Oxygen evolution from olivine Mn 1– x M x PO 4 ( M =Fe,Ni,Al,Mg) delithiated cathode materials

Olivine LiMnPO 4 is a promising cathode material for Li-ion batteries. One drawback of this material is the propensity of its delithiated phase, MnPO 4 , to evolve oxygen gas above approximately 200 °C. During thermal runaway of cells, this oxygen gas can burn the electrolyte and other cell components and thereby jeopardize safety. Partial substitution of Mn with M = Fe, Ni, Al, or Mg has been used to improve the lithium intercalation kinetics of Li x MnPO 4 ; however, the effect of these substitutions on oxygen evolution is not fully documented. In this paper, we calculate phase diagrams and oxygen evolution diagrams for these Mn 1–x M x PO 4 delithiated cathode materials. To generate the phase diagrams, we use subregular solid-solution models and fit the energetic parameters of these models to density functional theory calculations of special quasirandom structures. The resulting thermodynamic models describe the effect of mixing on the initial temperature of oxygen evolution and on the cumulative amount of oxygen evolution at elevated temperatures. We find that addition of Fe increases the initial temperature and decreases the cumulative amount of oxygen evolution. Mn 0.5 Fe 0.5 PO 4 exhibits an initial temperature 50 °C higher than MnPO 4 and releases 70% less oxygen gas at 300 °C. Al is insoluble in MnPO 4 , so addition of Al has no affect on the initial temperature. However, Al addition does slightly decrease the amount of oxygen evolution due to an inactive AlPO 4 component. Mg and Ni both decrease the initial temperature of oxygen evolution, and therefore may worsen the safety of MnPO 4 .

25 ENERGY STORAGE↗

Compositions comprising free-standing two-dimensional nanocrystals

The present invention is directed to methods of transferring urea from an aqueous solution comprising urea to a MXene composition, the method comprising contacting the aqueous solution comprising urea with the MXene composition for a time sufficient to form an intercalated MXene composition comprising urea.

36 MATERIALS SCIENCE↗

Graphdiyne as a high-capacity lithium ion battery anode material

Using the first-principles calculations, we explored the feasibility of using graphdiyne, a 2D layer of sp and sp{sup 2} hybrid carbon networks, as lithium ion battery anodes. We found that the composite of the Li-intercalated multilayer α-graphdiyne was C{sub 6}Li{sub 7.31} and that the calculated voltage was suitable for the anode. The practical specific/volumetric capacities can reach up to 2719 mAh g{sup −1}/2032 mAh cm{sup −3}, much greater than the values of ∼372 mAh g{sup −1}/∼818 mAh cm{sup −3}, ∼1117 mAh g{sup −1}/∼1589 mAh cm{sup −3}, and ∼744 mAh g{sup −1} for graphite, graphynes, and γ-graphdiyne, respectively. Our calculations suggest that multilayer α-graphdiyne can serve as a promising high-capacity lithium ion battery anode.

36 MATERIALS SCIENCE↗

Intercalation of Lithium in Pitch-Based Graphitized Carbon Fibers Chemically Modified by Fluorine: Soft Carbon With or Without an Oxide Surface

The effects of carbon structure and surface oxygen on the carbon's performance as the anode in lithium-ion battery were studied. Two carbon materials were used for the electrochemical tests: soft carbon made from defluorination of graphite fluoride, and the carbon precursor from which the graphite fluoride was made. In this research the precursor was graphitized carbon fiber P-100. It was first fluorinated to form CF(0.68), then defluorinated slowly at 350 to 450 C in bromoform, and finally heated in 1000 C nitrogen before exposed to room temperature air, producing disordered soft carbon having basic surface oxides. This process caused very little carbon loss. The electrochemical test involved cycles of lithium intercalation and deintercalation using C/saturated LiI-50/50 (vol %) EC and DMC/Li half cell. The cycling test had four major results. (1) The presence of a basic oxide surface may prevent solvent from entering the carbon structure and therefore prolong the carbon's cycle life for lithium intercalation-deintercalation. (2) The disordered soft carbon can store lithium through two different mechanisms. One of them is lithium intercalation. which gives the disordered carbon an electrochemical behavior similar to its more ordered graphitic precursor. The other is unknown in its chemistry, but is responsible for the high-N,oltage portion (less than 0.3V) of the charge-discharge curve. (3) Under certain conditions, the disordered carbon can store more lithium than its precursor. (4) These sample and its precursor can intercalate at 200 mA/g. and deintercalate at a rate of 2000 mA/g without significant capacity loss.

Hung, Ching-Chen↗

Encapsulated Sb and Sb 2 O 3 particles in waste-tire derived carbon as stable composite anodes for sodium-ion batteries

A conductive network of waste-tire derived carbon (WTC) was used to produce homogeneous Sb/WTC and Sb 2 O 3 /WTC composite materials via ball milling as promising anodes for sodium-ion batteries (SIBs). Highly reversible redox peaks at 0.81/0.71, 0.25 V for Sb/WTC and 0.80/0.76, 0.21/0.26 V for Sb 2 O 3 /WTC anodes have been observed related to Na + intercalation and deintercalation in carbon and Na–Sb and Na 3 Sb as plausible conversion/alloy reactions. Sodium half-cells delivered reversible discharge capacities of 206 mA h g -1 and 207 mA h g -1 at a current density of 37 mA g -1 for the composite Sb/WTC and Sb 2 O 3 /WTC materials, respectively. Both the Sb/WTC and Sb 2 O 3 /WTC composite materials showed impressive capacity retention with 85% and 88%, respectively after 100 cycles. Furthermore, rate capability studies at 60 °C yielded an enhanced capacity of 240 mA h g -1 for Sb/WTC and 300 mA h g -1 for Sb 2 O 3 /WTC at 37 mA g -1 .

25 ENERGY STORAGE↗

Integrating superconducting phase and topological crystalline quantum spin Hall effect in hafnium intercalated gallium film

Motivated by the growth of superconducting atomic hexagonal Ga layers on GaN surface we have calculated the electronic properties of Hf intercalated honeycomb Ga layers using first-principles theory. In contrast to the hexagonal Ga layers where substrate is necessary for their stability, we find the above structure to be dynamically stable in its freestanding form with small formation energy. In particular, six Dirac cones composed of Hf-d{sub xy}/d{sub x2-y2} orbitals are observed in the first Brillouin zone, slightly below the Fermi energy. Spin-orbit coupling opens a large band gap of 177 meV on these Dirac cones. By calculating its mirror Chern number, we demonstrate that this band gap is topologically nontrivial and protected by mirror symmetry. Such mirror symmetry protected band gaps are rare in hexagonal lattice. A large topological crystalline quantum spin Hall conductance σ{sub SH} ∼ −4 e{sup 2}/h is also revealed. Moreover, electron-phonon coupling calculations reveal that this material is superconducting with a transition temperature T{sub c} = 2.4 K, mainly contributed by Ga out-of-plane vibrations. Our results provide a route toward manipulating quantum spin Hall and superconducting behaviors in a single material which helps to realize Majorana fermions and topological superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗