Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

LTE modeling of inhomogeneous chromospheric structure using high-resolution limb observations

The paper discusses considerations relevant to LTE modeling of rough atmospheres. Particular attention is given to the application of recent high-resolution observations of the solar limb in the far-infrared and radio continuum to the modeling of chromospheric spicules. It is explained how the continuum limb observations can be combined with morphological knowledge of spicule structure to model the physical conditions in chromospheric spicules. This discussion forms the basis for a chromospheric model presented in a parallel publication based on observations ranging from 100 microns to 2.6 mm.

Lindsey, C.↗
NASA NTRS1990

High-resolution shock-capturing schemes for inviscid and viscous hypersonic flows

Hypersonic computations are presently conducted with an extension of a class of high-resolution implicit TVD algorithms suited to transonic multidimensional Euler and Navier-Stokes equations. These conservative shock-capturing schemes, which are spatially second- and third-order, may be first- and second-order accurate in time and suitable for either steady or unsteady calculations. Attention is given to the enhancement of hypersonic flows' convergence rate and stability; accuracy and efficiency is achieved by these means for very complex two-dimensional hypersonic viscous and inviscid shock interactions.

Yee, H. C.↗
NASA NTRS1993

Ultra-high resolution water window x ray microscope optics design and analysis

This project has been focused on the design and analysis of an ultra-high resolution water window soft-x-ray microscope. These activities have been accomplished by completing two tasks contained in the statement of work of this contract. The new results from this work confirm: (1) that in order to achieve resolutions greater than three times the wavelength of the incident radiation, it will be necessary to use spherical mirror surfaces and to use graded multilayer coatings on the secondary in order to accommodate the large variations of the angle of incidence over the secondary when operating the microscope at numerical apertures of 0.35 or greater; (2) that surface contour errors will have a significant effect on the optical performance of the microscope and must be controlled to a peak-to-valley variation of 50-100 A and a frequency of 8 periods over the surface of a mirror; and (3) that tolerance analysis of the spherical Schwarzschild microscope has been shown that the water window operations will require 2-3 times tighter tolerances to achieve a similar performance of operations with 130 A radiation. These results have been included in a manuscript included in the appendix.

Shealy, David L.↗
NASA NTRS1995

Atomic Physics with the Goddard High-Resolution Spectrograph on the Hubble Space Telescope: Oscillator Strengths for Neutral Sulfur - No. 1

Interstellar spectra toward zeta Oph acquired with the Goddard High-Resolution Spectrograph were used to obtain oscillator strengths for approximately two dozen S I lines. This analysis was possible because precisely determined experimental oscillator strengths are available for several multiplets, including one with a weak interstellar line. The self-consistent set of oscillator strengths then was obtained from a curve of growth based on line strengths spanning a range of a factor of 100. The derived f-values for a number of multiplets differ from values quoted by Morton (1991) but are generally consistent with the suite of available experimental and theoretical results.

Federman, S. R.↗
NASA NTRS1999

AXAF-1 High Resolution Assembly Image Model and Comparison with X-Ray Ground Test Image

The x-ray ground test of the AXAF-I High Resolution Mirror Assembly was completed in 1997 at the X-ray Calibration Facility at Marshall Space Flight Center. Mirror surface measurements by HDOS, alignment results from Kodak, and predicted gravity distortion in the horizontal test configuration are being used to model the x-ray test image. The Marshall Space Flight Center (MSFC) image modeling serves as a cross check with Smithsonian Astrophysical observatory modeling. The MSFC image prediction software has evolved from the MSFC model of the x-ray test of the largest AXAF-I mirror pair in 1991. The MSFC image modeling software development is being assisted by the University of Alabama in Huntsville. The modeling process, modeling software, and image prediction will be discussed. The image prediction will be compared with the x-ray test results.

Zissa, David E.↗
NASA NTRS1999

Collaborative Study of Analysis of High Resolution Infrared Atmospheric Spectra Between NASA Langley Research Center and the University of Denver

The Langley-D.U. collaboration on the analysis of high resolution infrared atmospheric spectra covered a number of important studies of trace gases identification and quantification from field spectra, and spectral line parameters analysis. The collaborative work included: Quantification and monitoring of trace gases from ground-based spectra available from various locations and seasons and from balloon flights. Studies toward identification and quantification of isotopic species, mostly oxygen and Sulfur isotopes. Search for new species on the available spectra. Update of spectroscopic line parameters, by combining laboratory and atmospheric spectra with theoretical spectroscopy methods. Study of trends of atmosphere trace constituents. Algorithms developments, retrievals intercomparisons and automatization of the analysis of NDSC spectra, for both column amounts and vertical profiles.

Goldman, Aaron↗
NASA NTRS2017

Toward Large FOV High-Resolution X-Ray Imaging Spectrometer: Microwave Multiplexed Readout of 32 TES Microcalorimeters

We performed a small-scale demonstration at GSFC of high-resolution x-ray TES microcalorimeters read out using a microwave SQUID multiplexer. This work is part of our effort to develop detector and readout technologies for future space based x-ray instruments such as the microcalorimeter spectrometer envisaged for Lynx, a large mission concept under development for the Astro 2020 Decadal Survey. In this paper we describe our experiment, including details of a recently designed, microwave-optimized low-temperature setup that is thermally anchored to the 50 mK stage of our laboratory ADR. Using a ROACH2 FPGA at room temperature, we simultaneously read out 32 pixels of a GSFC-built detector array via a NIST-built multiplexer chip with Nb coplanar waveguide resonators coupled to RF SQUIDs. The resonators are spaced 6 MHz apart (at approx. 5.9 GHz) and have quality factors of approximately 15,000. Using flux-ramp modulation frequencies of 160 kHz we have achieved spectral resolutions of 3 eV FWHM on each pixel at 6 keV. We will present the measured system-level noise and maximum slew rates, and briefly describe the implications for future detector and readout design.

Yoon, Wonsik↗
NASA NTRS2006

RAISHIN: A High-Resolution Three-Dimensional General Relativistic Magnetohydrodynamics Code

We have developed a new three-dimensional general relativistic magnetohydrodynamic (GRMHD) code, RAISHIN, using a conservative, high resolution shock-capturing scheme. The numerical fluxes are calculated using the Harten, Lax, & van Leer (HLL) approximate Riemann solver scheme. The flux-interpolated, constrained transport scheme is used to maintain a divergence-free magnetic field. In order to examine the numerical accuracy and the numerical efficiency, the code uses four different reconstruction methods: piecewise linear methods with Minmod and MC slope-limiter function, convex essentially non-oscillatory (CENO) method, and piecewise parabolic method (PPM) using multistep TVD Runge-Kutta time advance methods with second and third-order time accuracy. We describe code performance on an extensive set of test problems in both special and general relativity. Our new GRMHD code has proven to be accurate in second order and has successfully passed with all tests performed, including highly relativistic and magnetized cases in both special and general relativity.

Mizuno, Yosuke↗
NASA NTRSDate not supplied

Mercury Crustal and Lithospheric Properties from High-resolution Gravity Field Models

We have analyzed all the available tracking data from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission to determine high-resolution gravity field models. We have applied a technique based on line-of-sight accelerations that results in models with improved correlations with topography in areas where the spacecraft altitude was low. We have used these models in an analysis of admittance to determine properties of the crust and lithosphere. We focus on four areas where correlations between gravity and topography are high. These locations represent different areas on Mercury: the high-Mg region, the Strindberg crater plus some lobate scarps, heavily cratered terrain, and smooth plains (the northern rise). We find crustal densities around 2600 kg m-3 for the first three areas, and a higher density for the northern rise, indicative of volcanic materials. Elastic thickness is generally low and varies between 11 and 30 km.

Sander Johannes Goossens↗
NASA NTRS1990

A high resolution CO map of M51

Observations of the CO (1-0) emission in two fields of M51 were taken with the Berkeley-Illinois-Maryland Array at Hat Creek, California from May 1988 to February 1989. When combined with two previously observed fields (Lo et al. 1988), a complete map of the central 5 minute x 4 minute at a resolution of 7 seconds x 10 seconds was obtained. The project is part of an ongoing high-resolution survey of the molecular, atomic, and ionized gas distributions in nearby spiral galaxies. The two recently observed fields can be compared to the results of the interferometric study of Vogel et al. (1988 - hereafter VKS). Since the shortest spacing in the current survey is shorter than that of VKS, researchers expect to see more of the extended emission. This is evident when comparing the width of the spiral arms in each survey; ours are a bit broader. While some of the peaks in this region correspond to the peaks in VKS, several of them do not. These discrepancies are probably because of the low signal to noise inherent in observations of this nature. Single-dish maps are currently being readied for inclusion with the interferometer data. These will help fill the short-spacing hole in the UV plane, and serve to recover the flux missing from the interferometer maps.

Adler, D. S.↗
NASA NTRS1982

High-resolution X-ray spectra of solar flares. VI - Impulsive soft X-ray flares

Doschek et al. (1980) and Feldman et al. (1980) have discussed high-resolution soft X-ray spectra of solar flares. The present investigation is concerned with the characteristics of the impulsive events as observed in soft X rays and the cooling of the flare plasma in terms of energy loss processes. A class of intense, short-lived solar flares which appear to be characterized by very high densities at high temperatures is found. For the 1979 November 6 event, the cooling time is so rapid that the density obtained may be a lower limit. The main cooling mechanism for the flares is found to be radiative. Two of the events are associated with strong gamma-ray emission and both of these events are very unusual in their soft X-ray emission. The 1979 November 9 flare shows extremely broad X-ray emission lines during the rise phase, indicative of nonthermal velocities of the order of 300 km/s.

Feldman, U.↗
NASA NTRS1987

A laboratory demonstration of high-resolution hard X-ray and gamma-ray imaging using Fourier-transform techniques

A laboratory imaging system has been developed to study the use of Fourier-transform techniques in high-resolution hard X-ray and gamma-ray imaging, with particular emphasis on possible applications to high-energy astronomy. Considerations for the design of a Fourier-transform imager and the instrumentation used in the laboratory studies is described. Several analysis methods for image reconstruction are discussed including the CLEAN algorithm and maximum entropy methods. Images obtained using these methods are presented.

Palmer, David↗
NASA NTRS1981

High resolution X-ray spectra of solar flares. V - Interpretation of inner-shell transitions in Fe XX-Fe XXIII

The paper examines high-resolution solar flare iron line spectra recorded between 1.82 and 1.97 A by a spectrometer flown by the Naval Research Laboratory on an Air Force spacecraft launched on 1979 February 24. The emission line spectrum is due to inner-shell transitions in the ions Fe XX-Fe XXV. Using theoretical spectra and calculations of line intensities obtained by methods discussed by Merts, Cowan, and Magee (1976), electron temperatures as a function of time for two large class X flares are derived. These temperatures are deduced from intensities of lines of Fe XXII, Fe XXIII, and Fe XXIV. The determination of the differential emission measure between about 12-million and 20-million K using these temperatures is considered. The possibility of determining electron densities in flare and tokamak plasmas using the inner-shell spectra of Fe XXI and Fe XX is discussed.

Doschek, G. A.↗
NASA NTRS1987

High-resolution continuum observations of the Sun

The aim of the PFI or photometric filtergraph instrument is to observe the Sun in the continuum with as high resolution as possible and utilizing the widest range of wavelengths. Because of financial and political problems the CCD was eliminated so that the highest photometric accuracy is only obtainable by comparison with the CFS images. Presently there is a limitation to wavelengths above 2200 A due to the lack of sensitivity of untreated film below 2200 A. Therefore the experiment at present consists of a film camera with 1000 feet of film and 12 filters. The PFI experiments are outlined using only two cameras. Some further problems of the experiment are addressed.

Zirin, Harold↗
NASA NTRS1997

High-resolution spectral measurements of GRO J1655-40

Data from the transient gamma ray germanium detector taken during 1995 provide a limited ability to study the high resolution spectrum of the X-ray transient GRO J1655-40. During a two-day period around the peak intensity, the soft spectrum was measured and found to be consistent with a power law spectrum with photon index -3.0 +/- 0.2. No evidence was found for narrow spectral features in the 50 to 100 keV band or around 511 keV. The 3 sigma upper limit for a narrow emission line at 511 keV is 1.2 x 10(exp -2) phot/cu cm s.

intZand, J. J. M.↗