Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heterogeneities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Investigating Single-Molecule Fluorescence Spectral Heterogeneity of Rhodamines Using High-Throughput Single-Molecule Spectroscopy

We experimentally investigated several intra-molecular coordinate and environmental changes as potential causes of single-molecule fluorescence spectral heterogeneities (smFSH). Here, we developed a high-throughput single-molecule spectroscopy technique to analyze more than 5,000 single-molecule emission spectra from each of nine commonly used fluorophores with different structural rigidities deposited on substrates with different polarities. We observed an unexpected high smFSH from structurally rigid Rhodamine B compared with a structurally flexible Cyanine dye - Alexa Fluor 647. Based on experimentally measured smFSH, we ruled out the system’s noise uncertainty, single-molecule spectral diffusion, and environmental polarity as the primary causes of the high smFSH. We found that the rotational flexibility of N, N-dialkylated groups contributed to the smFSH. With the high smFSH observed in structurally more rigid model fluorophores, we speculated that other intra-molecular coordinate and environmental changes might also contribute to the high smFSH in Rhodamines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Upconversion on the Micrometer Scale: Impact of Local Heterogeneity

The properties of perovskite/naphtho[2,3-a]pyrene (NaPy) upconversion devices are investigated by a combination of atomic force microscopy and photoluminescence mapping to understand the role of microscopic heterogeneity in the ensemble device properties. The results emphasize strong microscopic inhomogeneity across the perovskite/NaPy upconversion device due to local formation of NaPy microcrystals. NaPy shows emission from three distinct states in the solid state: S 1 ′ emission at 520 nm, excimer emission at 560 nm, and S 1 ″ emission at 620 nm. Clear spatial differences in the emission spectrum under 405 nm excitation are found, highlighting that there is a strong microcrystal-to-microcrystal variation in the optical properties─emphasizing a need for multimodal measurements. Furthermore, our results indicate that microcrystals with strong emission from the strongly coupled low-energy state S 1 ″ (J-dimer) show much higher upconversion intensity than those with dominant emission from the high-energy S 1 ′ state (I-aggregate). Hence, our results suggest that microcrystals with strong emission from the low-energy state S 1 ″ act as isolated hotspots for upconversion.

Crystals↗
DOE OSTI2026

Tuning the Solvation and Solubility Properties of Molecularly Heterogeneous Nonionic Deep Eutectic Solvents via Interface Organization

Common separation techniques, such as liquid− liquid extraction, are usually used for extractions and purifications due to their industrial scalability and affordability. However, these well-established practices are hindered by low selectivity and challenges in recovering solutes and solvents. Deep eutectic solvents (DES), a fairly new type of solvent, have the potential to overcome these issues. DESs are binary mixtures whose physical properties can be tuned by selecting the appropriate precursors to facilitate and/or enhance processes such as extraction. A promising DES for selective separations is formed when lauric acid (LA) is mixed with N-methylacetamide (NMA). This LA-NMA DES has a heterogeneous microscopic structure that can solvate compounds with completely different polarities. This study explores how forming an organized structure on the mesoscale affects the solubility of nonpolar solutes in nonionic DESs. To this end, the molecular and mesoscale structures and their effect on the solubility and solvation properties are evaluated for the LA-NMA DES and two new DESs with slight chemical variations in their precursors. It is observed that the organization of the nonpolar DES domains and, consequently, of their interfaces directly relates to the solubility of nonpolar compounds. Specifically, correctly selecting the DES precursors that form organized nonpolar domains leads to an organized interface in which the nonpolar solutes are solvated, thereby increasing the solubility. Additionally, enhanced dissolution power was observed in a completely different DES with mesoscale order in its molecular structure and composed of menthol and lauric acid. The latter result further validates the proposed tunability of the DES dissolution power through organized interfaces, extending it beyond a specific DES family and opening the possibility of new extraction-tailored designer solvents.

Extraction↗
DOE OSTI2024

Tuning Exciton Emission via Ferroelectric Polarization at a Heterogeneous Interface between a Monolayer Transition Metal Dichalcogenide and a Perovskite Oxide Membrane

Here we demonstrate the integration of a thin BaTiO 3 (BTO) membrane with monolayer MoSe 2 in a dual gate device that enables in-situ manipulation of the BTO ferroelectric polarization with a voltage pulse. While two-dimensional (2D) transition metal dichalcogenides (TMDs) offer remarkable adaptability, their hybrid integration with other families of functional materials beyond the realm of 2D materials has been challenging. Released functional oxide membranes offer a solution for 2D/3D integration via stacking. 2D TMD excitons can serve as a local probe of the ferroelectric polarization in BTO at a heterogeneous interface. Using photoluminescence (PL) of MoSe 2 excitons to optically readout the doping level, we find that the relative population of charge carriers in MoSe 2 depends sensitively on the ferroelectric polarization. This finding points to a promising avenue for future-generations versatile sensing devices with high sensitivity, fast read-out, and diverse applicability for advanced signal processing.

42 ENGINEERING↗
DOE OSTI2025

Molecular-Scale Insights into the Heterogeneous Interactions between an m -Terphenyl Isocyanide Ligand and Noble Metal Nanoparticles

The structural and chemical properties of metal nanoparticles are often dictated by their interactions with molecular ligand shells. These interactions are highly material-specific and can vary significantly even among elements within the same group or materials with similar crystal structure. In this study, we surveyed the heterogeneous interactions between an m-terphenyl isocyanide ligand and Au and Ag nanoparticles (NPs) at the single-molecule limit. Specifically, we found that the ligation behavior with this molecule differs significantly between that of Au and AgNPs. Surface-enhanced Raman spectroscopy measurements revealed unique enhancement factors for two molecular vibrational modes between two metal surfaces, indicating different ligand binding geometries. Molecular-level characterization using scanning tunneling microscopy allowed us to directly visualize these variations between Ag and Au surfaces, which we assign as two distinct binding mechanisms. This molecular-scale visualization provides clear insights into the different ligand–metal interactions as well as the chemical behavior and spectroscopic characteristics of isocyanide-functionalized NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Heterogeneous Corrosion Pathways in Pt–Ni Nanododecahedra Revealed by In Situ Liquid Cell TEM

Unraveling nanoscale corrosion pathways is essential for understanding materials degradation mechanisms and designing corrosion-resistant metal alloys. Here, in this study, we directly visualize the corrosion of Pt–Ni nanododecahedra in 0.1 M HCl using liquid cell TEM. Each nanoparticle features a Ni-rich core and a Pt-rich frame. Our observation reveals that corrosion proceeds in two distinct stages: first the Ni-rich core dissolves without forming porosity, yielding small Pt nanocrystals and transient NiCl 2 ·6H 2 O at the retreating interfaces; then the Pt-rich frame fragments into ∼5 nm Pt 3 Ni nanocrystals that subsequently dissolve uniformly, accompanied by fleeting Pt chlorides. A percolation-based theory explains the observed behaviors: The core’s ∼8% Pt lies below the Pt connectivity threshold, preventing Pt scaffold formation, whereas the frame’s 48% Ni exceeds the Ni percolation threshold and collapses. Ordered Pt 3 Ni suppresses Ni percolation, thereby enforcing uniform dissolution. These findings reveal how composition and structural ordering govern heterogeneous corrosion in Pt–Ni architectured nanoparticles.

Liquid phase TEM↗
DOE OSTI2024

Heterogeneous Organochromium Catalysts for Stereoselective Isoprene Polymerization

In this study, heterogeneous organochromium catalysts have been developed via surface lithiation of traditional surface organometallic complexes to mediate stereoselective isoprene polymerization. Chemisorption of the molecular complex Cr(CH 2 SiMe 3 ) 4 on high surface area anatase titania nanoparticles as well as on a silica support led to the bipodal complexes Cr/TiO 2 and Cr/SiO 2 , respectively. Subsequent reductive lithium intercalation with n-butyllithium led to the formation of lower valent Cr 2+ species Cr/LTO and Cr/Li/SiO 2 . Alternatively, Cr(CH 2 SiMe 3 ) 4 was allowed to react with nBuLi-reduced anatase titania (LTO) to provide Cr/LTO Inv . Cr/LTO and Cr/Li/SiO 2 both polymerize isoprene with very high activities (154 and 174 kg molCr –1 h –1 , respectively) to provide polyisoprene with cis-1,4 selectivity up to 82% in toluene at 50 °C. On the other hand, Cr/SiO 2 provides polyisoprene with excellent trans-1,4 selectivity up to 98% (16 kg molCr –1 h –1 ), and Cr/TiO 2 was catalytically inactive. Cr/LTO Inv is less active and selective, and X-ray absorption spectroscopy (XAS) measurements of the precatalyst revealed the presence of a mixture of metallic Cr 0 , Cr 4+ , and only minor Cr 2+ species. Thus, surface lithiation can promote the formation of lower valent metal centers which enable stereocontrol in isoprene polymerizations and may be extended as a general protocol to other catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Heterogeneous Growth of UiO-66-NH 2 on Oxidized Single-Walled Carbon Nanotubes to Form “Beads-on-a-String” Composites

In this work we demonstrate a facile synthesis of UiO-66-NH 2 metal-organic framework (MOF)/oxidized single-walled carbon nanotubes (ox-SWCNTs) composite at room temperature. Acetic acid (HAc) was used as a modulator to manipulate the morphology of the MOF in these composites. With zirconium oxide-cluster (Zr) to 2-aminoteraphthalate linker (ATA) 1:1.42 ratio and acetic acid modulator, we achieved predominately heterogeneous MOF growth on the sidewalls of CNTs. Understanding the growth mechanism of these composites was facilitated by conducting DFT calculations to investigate the interactions between ox-SWCNTs and the MOF precursors. The synthesized composites combine both micro-porosity of the MOF and electrical conductivity of the SWCNTs. Gas sensing tests demonstrated higher response for UiO-66-NH 2 /ox-SWCNT hybrid toward dry air saturated with dimethyl methylphosphonate (DMMP) vapor compared to oxidized single-walled carbon nanotubes (ox-SWCNTs) alone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Physicochemical Heterogeneity in Silicon Anodes from Cycled Lithium-Ion Cells

The severe capacity fade of lithium-ion cells with silicon-dominant anodes has hindered their widescale commercialization. In this work, we link cell capacity fade to the heterogeneous physicochemical evolution of silicon anodes during battery cycling. Through a multi-length scale characterization approach, we demonstrate that silicon particles near the anode surface react differently than those near the copper current collector. In particular, near the anode surface we find an amorphized wispy silicon encased in a highly fluorinated matrix of electrolyte-reduction products. In contrast, closer to the current collector, the silicon retains more of its initial morphology and structure, suggesting the presence of isolated particles. Here, the results show that accessibility of active silicon to lithium-ions varies across the anode matrix. Material and cell designs, which minimize electrode expansion resulting from the in-filling of pores with the solid electrolyte interphase (SEI), are needed to enhance anode homogeneity during the electrochemical cycling.

25 ENERGY STORAGE↗
DOE OSTI2026

Dynamic Nanoscale Spatial Heterogeneity in a Perovskite-to-Brownmillerite Topotactic Phase Transformation

Phase transitions are omnipresent in modern condensed matter physics and its applications. In solids, first-order phase transformations typically occur by nucleation and growth under nonequilibrium conditions. Under constant external conditions, e.g., constant annealing temperature and pressure, the nucleation and growth dynamics are often thought of as spatially and temporally independent. Here, in situ Bragg X-ray photon correlation spectroscopy (XPCS) reveals nanoscale spatial and dynamical heterogeneity in the perovskite-to-brownmillerite topotactic phase transformation in La 0.7 Sr 0.3 CoO 3 thin films annealed under constant reducing conditions over a time span of multiple hours. Specifically, a time scale associated with domain growth remains stable, with a corresponding domain wall speed of v d = 6 ± 0.5 × 10 –4 nm/s (2 ± 0.2 nm/h), while a slower time scale, associated with temperature-driven depinning of domains, leads to accelerating dynamics with time scales following an aging power law with exponent −2.2 ± 0.5. This experiment demonstrates that Bragg XPCS is a powerful tool to study nanoscale dynamics in structural phase transformations, with the ability to extract quantitative average values related to nanodomain motion in situ. Furthermore, the results are relevant for phase engineering of phase-change devices, as they show that nanoscale dynamics, linked to domain and domain-wall motion, can continuously evolve and speed up with time, even hours after the initiation of the phase transformation, with potential repercussions on electrical performance.

X-ray photon correlation spectroscopy↗
DOE OSTI2026

Spatio-Kinetic Electronic Heterogeneity in MoS 2 Revealed by Ultrafast Electron Microscopy: Implications for Optoelectronics

There is broad interest in layered, two-dimensional (2D) semiconductors owing to their high optical absorption and ability to heterogeneously integrate with various substrates. In such layered semiconductors, mesoscopic imperfections, such as surface step edges, may affect charge carrier kinetics and device performance, but studying their effects on carrier transport with sufficient spatial and temporal resolution is a challenge. Using scanning ultrafast electron microscopy, we image the near-surface charge carrier kinetics with μm/ps spatiotemporal resolution in single-crystal MoS 2 samples with surface steps tens of nanometers in height. We find an approximately 3-fold increase in surface trap density near such surface steps compared to the uniform, flat surface regions. Despite the difference in trap state density, filling of the traps occurs over the same time scale (∼100 ps), but carrier recovery is much slower near the step compared to the uniform regions of the material. Furthermore, these results provide an approach to measure ultrafast dynamics and determine the required uniformity of layered materials depending on the speed limit constraints for specific applications.

SEM↗
DOE OSTI2020

Effect of Collective Dynamics and Anharmonicity on Entropy in Heterogenous Catalysis: Building the Case for Advanced Molecular Simulations

In this paper, we present a perspective on the computational determination of entropy and its effects and consequences on heterogeneous catalysis. Special attention is paid to the role of anharmonicity and the deviations from the standard harmonic oscillator approximations which can fail to provide a reliable assessment of entropy. To address these challenges, advanced methodologies are needed that can explicitly account for these thermodynamic drivers through the appropriate statistical sampling of reactive free energy surfaces. We discuss where anharmonicity should be expected, where it has been observed from a theoretical perspective, and the methods currently employed to address it. We concentrate on three types of systems where we have observed major, nonnegligible anharmonic effects: (1) supported nanoparticles, where the migration of metal atoms, complexes, and entire clusters exhibit anharmonic behavior in their dynamic motion; (2) porous solids where confinement effects distort potential energy surfaces and hinder molecular motions resulting in large entropic terms; and (3) solid/liquid interfaces, where interactions between solvent molecules and adsorbed species can result in large solvent organization free energy and unique reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oxidative Dehydrogenation of Propane to Propylene with Soft Oxidants via Heterogeneous Catalysis

Oxidative dehydrogenation of propane to propylene can be achieved using conventional, oxygen-assisted dehydrogenation of propane (O 2 –ODHP) or via the use of soft oxidants, such as CO 2 , N 2 O, S-containing compounds, and halogens/halides. The major roles of soft oxidants include inhibiting overoxidation and improving propylene selectivity, which are considered to be current challenges in O 2 -assisted dehydrogenation. For both CO 2 – and N 2 O–ODHP reactions, significant efforts have been devoted to developing redox-active (e.g., chromium, vanadate, iron, etc.), nonredox-type main group metal oxide (e.g., group IIIA, gallium), and other transition metal/metal oxide catalysts (e.g., molybdenum, palladium platinum, rhodium, ruthenium, etc.), as well as zeolite-based catalysts with adjustable acid–base properties, unique pore structures, and topologies. Metal sulfides have shown promising performance in DHP, whereas the development of suitable catalysts has lagged for SO 2 - or S-assisted ODHP. Recently, significant efforts have been focused on homogeneous and heterogeneous ODHP using halogens (e.g., Br 2 , I 2 , Cl 2 , etc.) and hydrogen halides (e.g., HCl and HBr) for the development of facile processes for C 3 H 6 synthesis. This work aims to provide a critical, comprehensive review of recent advances in oxidative dehydrogenation of propane with these soft oxidants, especially highlighting the current state of understanding of the following factors: (i) relationships between composition, structure, and catalytic performance, (ii) effects of the support, acidity, and promoters, (iii) reaction pathway and mechanistic insights, and (iv) the various roles of soft oxidants. Theoretical and computational insights toward understanding reaction mechanisms and catalyst design principles are also covered. Future research opportunities are discussed in terms of catalyst design and synthesis, deactivation and regeneration, reaction mechanisms, and alternative approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comparison of Heterogeneous Hydroformylation of Ethylene and Propylene over RhCo 3 /MCM-41 Catalysts

The reaction mechanisms of heterogenous hydroformylation of ethylene and propylene were compared at 413-453 K using RhCo 3 /MCM-41 as catalysts. The reaction rates of propylene for both hydroformylation and the undesired side reaction of hydrogenation were found to be about one order of magnitude lower than those for ethylene in flow reactor studies. The difference in the kinetic behavior between ethylene and propylene was investigated by measuring the reaction orders and apparent activation energies, and these macro-kinetic observables were analyzed using the degree of rate control (DRC) method. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments were performed to characterize the surface intermediates formed during the reactions. When the reactant was changed from ethylene to propylene, the IR peak corresponding to adsorbed CO exhibited a significant increase, while the IR peaks of alkyl group decreased in magnitude. Combined with the DRIFTS results, DRC analysis indicates that the first step of olefin hydroformylation, the formation of an alkyl group on the catalyst surface, plays a key role in the difference between ethylene and propylene. This step is kinetically non-relevant when ethylene is the reactant, but it is one of the rate-controlling steps for propylene. Furthermore, the low concentration of the adsorbed propyl group, which is a common intermediate shared by both hydroformylation and hydrogenation of propylene, decreases the rates of both reaction pathways as compared to ethylene.

10 SYNTHETIC FUELS↗
DOE OSTI2026

Theoretical Insights into Reaction-Induced Transformation and Tuning of Catalytic Behavior in Heterogenous Catalysis

Reaction-induced transformations in heterogenous catalysis represent diverse phenomena that challenge traditional views of static catalyst surfaces. From surface adsorbate dynamics, atomic rearrangements, to composition and phase transitions, these processes reveal the profound differences between idealized model systems under ultrahigh vacuum and the complex, evolving interfaces that govern real catalytic behaviors under reaction conditions. Here, this perspective reviews recent theoretical efforts to provide atomic-level mechanistic insights into significant reaction-induced transformations and their impact on catalytic activity and selectivity. It underscores the need for an integrated framework that combines predictive simulations with operando characterization to uncover active sites and mechanisms under realistic operating conditions. Achieving this requires accelerating existing simulations to fully capture diverse reaction-induced surface dynamics, enabling scalable and accurate modeling of catalysts as condition-dependent, dynamically evolving systems. Such approaches are critical to bridge the gap between theory and practice, offering a pathway to more impactful and predictive catalyst design.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Reaction Heterogeneity in LiFePO 4 Agglomerates and the Role of Intercalation-Induced Stress

As an important battery cathode material, reaction distribution in lithium iron phosphate (LiFePO4) has been extensively studied in dispersed particle systems, but remains poorly understood for mesoscopic agglomerates (or secondary particles) that are used in most commercial batteries. Herein, we apply three-dimensional X-ray spectroscopic imaging to characterize the two-phase structure in LiFePO4 secondary particles during electrochemical cycling. (De)lithiated domains are found to not form the commonly assumed core-shell structure but develop highly anisotropic filamentary morphology that is rate independent and symmetric between charging and discharging. Phase-field simulations elucidate that the observed 1D phase growth behavior is not caused by the 1D lithium diffusivity of LiFePO4 but the elastic interaction between primary particles, which gives rise to stronger reaction heterogeneity than dispersed nanoparticles. As a result, uniform lithium (de)intercalation does not occur on the secondary particle surface even at high cycling rates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Morphological Heterogeneity Impact of Film Solid-State Cathode on Utilization and Fracture Dynamics

Structural heterogeneity in solid-state batteries can impact material utilization and fracture mechanisms. Crystallographically oriented lithium cobalt oxide film cathodes serve as a model electrode system for exploring how void distribution contributes to stress relief and build up during cycling. Real- and reciprocal-space operando and ex situ synchrotron based experiments are utilized to understand structural changes across multiple length scales contribute to stress generation and fracture. Nanotomography uncovers a depth-dependent porosity variation in the pristine electrode and highlights preferential fracture in regions of lower porosity during delithiation. Energy-dispersive X-ray diffraction and 3D X-ray absorption near-edge spectroscopy (XANES) reveal the underutilization of cathode material in these regions. 3D XANES also confirms preferential delithiation near the sub-grain boundaries. Chemo-mechanical modeling coupled with site-specific mechanical characterization demonstrate how stress accumulation in dense regions of the electrode leads to fracture and underutilization of active material. In conclusion, our findings reveal the importance of materials design to alleviate stress in small-volume changing cathodes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Online LIBS–ML Framework for Dynamic Characterization of Heterogeneous Waste-Derived Gasification Feedstocks

LIBS−ML framework for real time feedstock characterization during continuous conveyor transport Heterogeneous waste derived feedstocks (e.g., waste coal, biomass and blends) introduce rapid variability in heating value and ash chemistry that affect gasifier operation, yet conventional laboratory characterization techniques are too slow to support proactive control. To address this gap, this study reports on an online, in situ, dynamic characterization framework that couple’s laser-induced breakdown spectroscopy (LIBS) with leakage safe machine learning (ML) regression to deliver real time, decision quality predictions of gasifier relevant properties. A controlled sample matrix spanning two different waste coals, two different biomasses, and engineered blends under two particle size conditions were constructed and benchmarked using standardized laboratory analyses for proximate/ultimate properties and ash composition. LIBS spectra were acquired dynamically as material flowed on a conveyor belt, using high energy 1064 nm laser ablation and shot averaging to improve repeatability and precision. Supervised regression models (multi layer perceptron (MLP) /artificial neural network (ANN), random forest (RF), and support vector regression (SVR)) and an optimized weighted ensemble were trained on emission line feature sets using nested cross validation with Bayesian hyperparameter tuning and validated against an independent hold out set. The proposed LIBS−ML workflow achieves near laboratory predictive fidelity across parametric targets (including higher heating value (HHV), ash content, fixed carbon, sulfur, major ash forming oxides, and initial deformation temperature (IDT)), with the weighted ensemble providing a robust default predictor under dynamic measurement conditions. These results demonstrate a practical pathway for real time feedstock characterization that can enable feedforward adjustments and more resilient gasifier operation for variable quality waste derived fuels.

Biomass↗