Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hands”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A review of in situ/operando studies of heterogeneous catalytic hydrogenation of CO 2 to methanol

Repurposing CO 2 into chemicals, one of the Carbon Dioxide Removal (CDR) strategies, still faces significant challenges in conversion and energy efficiency due to the lack of effective catalysts and processes. Fundamental understanding through in situ/operando investigations of the reaction mechanisms and catalyst structures is pivotal for developing the efficient catalysts. This paper reviews the past and recent in situ/operando studies of methanol synthesis from heterogeneous CO 2 hydrogenation over a few typical catalysts including Cu-based, oxide-based, and noble-metal-based catalysts. With the development of high-pressure reactors, in situ/operando IR, X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), neutron diffraction and imaging have been used to reveal the surface intermediates and structures of working catalysts under CO 2 hydrogenation conditions. On the one hand, the combined operando techniques shed light on working mechanisms for some catalytic systems. On the other hand, due to the complexity of selective CO 2 hydrogenation reaction and limited sensitivity of current accessible operando techniques to the surface structure of catalysts, it is still murky about the exact nature of the active sites at the surface/interface and how different sites promote different reaction paths. Furthermore, it is concluded that new methodologies for differentiating signals from different sites, and the development of surface-sensitive techniques for high pressure reactions are needed for providing structural descriptors of highly active and selective CO 2 conversion catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Machine learning-based ethylene concentration estimation, real-time optimization and feedback control of an experimental electrochemical reactor

With the increase in electricity supply from clean energy sources, electrochemical reduction of carbon dioxide (CO 2 ) has received increasing attention as an alternative source of carbon-based fuels. As CO 2 reduction is becoming a stronger alternative for the clean production of chemicals, the need to model, optimize and control the electrochemical reduction of the CO 2 process becomes inevitable. However, on one hand, a first-principles model to represent the electrochemical CO 2 reduction has not been fully developed yet because of the complexity of its reaction mechanism, which makes it challenging to define a precise state-space model for the control system. On the other hand, the unavailability of efficient concentration measurement sensors continues to challenge our ability to develop feedback control systems. Gas chromatography (GC) is the most common equipment for monitoring the gas product composition, but it requires a period of time to analyze the sample, which means that GC can provide only delayed measurements during the operation. Moreover, the electrochemical CO 2 reduction process is catalyzed by a fast-deactivating copper catalyst and undergoes a selectivity shift from the product-of-interest at the later stages of experiments, which can pose a challenge for conventional control methods. To this end, machine learning (ML) techniques provide a potential approach to overcome those difficulties due to their demonstrated ability to capture the dynamic behavior of a chemical process from data. Motivated by the above considerations, we propose a machine learning-based modeling methodology that integrates support vector regression and first-principles modeling to capture the dynamic behavior of an experimental electrochemical reactor; this model, together with limited gas chromatography measurements, is employed to predict the evolution of gas-phase ethylene concentration. The model prediction is directly used in a proportional-integral (PI) controller that manipulates the applied potential to regulate the gas-phase ethylene concentration at energy-optimal set-point values computed by a real-time process optimizer (RTO). Specifically, the RTO calculates the operation set-point by solving an optimization problem to maximize the economic benefit of the reactor. Finally, suitable compensation methods are introduced to further account for the experimental uncertainties and handle catalyst deactivation. The proposed modeling, optimization, and control approaches are the first demonstration of active control for a CO 2 electrolyzer and contribute to the automation and scale-up efforts for electrified manufacturing of fuels and chemicals starting from CO 2 .

42 ENGINEERING↗
DOE OSTI2022

Enriched immersed boundary method (EIBM) for interface-coupled multi-physics and applications to convective conjugate heat transfer

It is challenging to develop numerical methods that simultaneously maintain accuracy of resolving boundary conditions and mesh flexibility to handle the interface in interface-coupled multi-physics problems involving large property discontinuity. On the one hand, boundary-fitted methods possess high accuracy in capturing the interfacial phenomenon but involve complicated volumetric mesh generation, mesh-motion, and even re-meshing procedures. On the other hand, immersed boundary methods (IBM) provide mesh flexibility but sometimes suffer from inferior interface representations, leading to poor enforcement of boundary conditions. This paper presents an enriched immersed boundary method (EIBM) to overcome this challenge and demonstrates its efficacy in conjugate heat transfer, a representative example in interface-coupled multi-physics systems that have implications for many industrial processes. Further, the core technique of the method is to enhance IBM’s accuracy of the fluid–solid interface by enriching the degrees of freedom of the cut elements to enforce temperature and flux compatibilities and resolve all the physical unknowns on the background mesh to simplify the volumetric mesh generation. We implement the EIBM under the framework of a variational multiscale formulation for coupled Navier–Stokes and thermodynamics equations. The enriched DoFs enable better enforcement of temperature and flux compatibilities with large conductivity ratios across the fluid–solid interface. At the same time, the immersed nature of the proposed method still attains mesh flexibility. The EIBM’s accuracy is thoroughly evaluated through a set of examples, ranging from benchmark problems with analytical solutions to real-world cooling processes of a moving metallic structure with complex geometry.

42 ENGINEERING↗
DOE OSTI2024

Machine learning-guided design, synthesis, and characterization of atomically dispersed electrocatalysts

The recent integration of machine learning into materials design has revolutionized the understanding of structure–property relationships and optimization of material properties beyond the trial-and-error paradigm. On one hand, machine learning has significantly accelerated the development of atomically dispersed metal-nitrogen-carbon (M-N-C) electrocatalysts, which traditionally heavily relied on heuristic approaches. On the other hand, the primary challenge of leveraging machine learning to expedite M-N-C materials discovery lies in the cost associated with data collection. Here, we review recent machine learning integration strategies for M-N-C catalyst development, including discussions on the typical algorithms such as symbolic regression and convolutional neural networks employed for the theoretical design, synthesis optimization via active learning, and advanced microscopy characterization. Subsequently, we provide our perspective on potential near-future directions for furthering machine learning-assisted development of new M-N-C catalysts and elucidating the complex physicochemical mechanisms governing the selectivity, activity, and durability in this class of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Recent progress in the design of the K-DEMO divertor

The preliminary conceptual design of the Korean fusion demonstration reactor (K-DEMO) with a major radius of 6.8 m and the fusion power of 2200 MW has been studied since 2012. The overall configuration of the K-DEMO divetor system based on the ITER-like water-cooled tungsten technology is a double-null type symmetric divertor subdivided into 32 toroidal modules for the vertical maintenance. A detached divertor scenario with impurity seeding was considered as the primary approach for the power exhaust to reduce the peak heat flux lower than the engineering limit of 10 MW/m 2 . The power exhaust performance at the scrap off layer was estimated by using UEDGE-2D code, a two-dimensional fluid transport code for collisional edge plasma and neutral species like N, Ne, and Ar. Particle and heat flux on inboard and outboard divertor targets were calculated for the detached cased depending on parameters such as the impurity seeding rate, pumping rate, and the pedestal density. On the other hand, a magnetic solution like X-divertor, snowflake divertor, and super X-divertor to expand the plasma wet area was considered for K-DEMO since the detached divertor increasing a radiation fraction by impurity seeding might be able to be unstable. However, the extremely high current of poloidal coils was required more than the engineering limit, 20 MA, to form magnetic field lines for the alternative divertors. Based on the physical calculation of the edge plasma, engineering analyses were carried out to find out the thermal and structural reliability. The thermo-hydraulic analysis confirmed thermal stability, whether all comprising materials are operating within their allowable temperature windows when the case of the peak heat flux is set to 10 MW/m 2 on the outboard divertor target. The response surface optimization method derived two optimal design candidates employing two kinds of heat sink materials, respectively: the reduced activation ferritic martensitic (RAFM) steel and CuCrZr alloy. Additionally, the drawbacks and merits of the two materials were definite. The optimal design with applying RAFM steel was vulnerable to withstand thermal and mechanical loads since low thermal conductivity caused too thin thickness of the heat sink. On the other hand, the CuCrZr alloy has critical drawbacks in terms of activation and radioactive waste despite its high thermal conductivity. Meanwhile, preliminary electromagnetic (EM) analysis was carried out to estimate the EM loads caused by the abnormal behaviors of plasma since EM loads are one of the most critical external loads for designing a DEMO divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Structural dependence of hydrogen evolution reaction on transition metal catalysts sputtered at different temperatures in alkaline media

In the present article, we studied the catalytic activity of magnetron sputtered Mo, V, Ni, and Co thin films for hydrogen evolution reaction (HER) in the alkaline electrolyte. Here, we find that the HER potentials (η 10 ) of the Mo and V thin film catalysts sputtered at 800 °C shift positive with respect to those of the film catalysts sputtered at 25°C. For Mo metal the observed shift of η 10 was 280 mV and for V metal observed shift of η 10 was 390 mV. On the other hand, minimal effect of sputtering temperature on both Ni and Co thin film catalyst activity for HER was observed. Structural analysis reveals that Mo and V prepared at 800 °C have uncommon face centered cubic (fcc, 0.74 packing density) structure as opposed to room-temperature sputtered Mo and V thin films which have common body centered cubic (bcc, 0.68 packing density) structure, resulting in significant increases of the packing densities when they are prepared at 800 °C. On the other hand, the high-temperature prepared thin films of Ni and Co retained fcc structures, resulting in no density changes compared to the room-temperature prepared fcc Ni and hexagonal close packed (hcp, 0.74 packing density) Co. Impedance spectroscopy shows that fcc Mo is a better catalyst than fcc Ni, which is considered an industry standard for non-noble pure metal-based catalysts in alkaline media. Stability tests also suggest that fcc Mo thin film catalysts prepared at 800 °C are more durable than fcc Ni thin films. Our study points out that structure phases of catalysts can be a key factor governing the activities of transition metals for HER in alkaline media.

08 HYDROGEN↗
DOE OSTI2023

Prediction and demonstration of periodic tensile cracking in rate-dependent porous cement

Periodic dilation bands are shown to occur when cylinder-shaped saturated cement specimens are subjected to rapid decompression, with the spacing between the bands scaling as a power law of the decompression time. This behavior is predicted by theory, which is specified to this scenario based on prior work that was more general and applied to compaction. Specifically, the formation of the bands is shown to coincide with periodicity that naturally arises in the effective stress when the material follows a Terzaghi-type consolidation law, although in reverse for dilation and with material deformation described by a rate-dependent viscoplastic law. When strain rate is proportional to effective stress to a power that is greater than one, periodic regions of tensile effective stress arise through the poromechanical fluid-solid coupling. The theoretically-predicted exponent of the resulting power-law relationship between dilation band spacing and unloading time successfully brackets the experimental results, for which it is observed that the exponent is slightly stronger than a square-root relationship (0.28 to 0.67) at testing temperatures of 20 °C and 90 °C. Further, these results demonstrate that rapid-depressurization leads to periodic fracturing that could, on the one hand, be detrimental to the isolation provided by cement used to seal wellbores in the petroleum industry. On the other hand, the dilation bands could also be favorable to production if generated in low-permeability reservoir rocks such as shales that are targeted for petroleum production or granites that are targeted for geothermal energy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The role of ternary alloying elements in eutectoid transformation of U-10Mo alloy part II. In and Ex-situ Neutron diffraction-based assessment of eutectoid phase transformation kinetics in U-9.8Mo-0.2X alloy (X = Cr, Ni or Co)

HExploring the effects of minor ternary alloying additions, typically impurity elements, on the phase stability of U-10Mo is important for preventing undesirable phase decomposition during processing or during service. This work examines the influence small ternary additions of Cr, Ni, and Co. Both in-situ and ex-situ neutron diffraction measurements made during and after high temperature (450 – 525°C) exposures were used to better define the influence of these elements on the time-temperature-transformation (TTT) behavior of U-10Mo, providing information which is complementary to electron microscopy investigations of the same alloy systems performed in the first part of this work. Minor additions of Ni and Co decrease the ?-phase stability at all temperatures investigated. Signatures of U6X (X = Ni or Co) compounds were shown to be present in amounts of up to 6 wt% in the heat treated alloys, suggesting that the initial precipitation of this phase may catalyze further ?-phase decomposition. On the other hand, the Cr containing alloys were observed to have nearly the same, and in some cases slower, phase transformation kinetics when compared to the binary U-10Mo control samples. The results of the study have enabled preliminary estimates of the TTT curves for the ternary alloys.

phase transformation, kinetics, discontinuous prec↗
DOE OSTI2022

Modelling single atom catalysts for water splitting and fuel cells: A tutorial review

Here, in this tutorial review, we report the state-of-the-art of the modeling approaches of Single Atom Catalysts (SAC) for water splitting and fuel cells reactions. The discussion applies for Hydrogen Evolution Reaction (HER), Oxygen Reduction Reaction (OER), Hydrogen Oxidation Reaction (HOR), and Oxygen Reduction Reaction (ORR). The main scope of this work is to underline the relevant aspects of SACs modelling. On the one hand, the review could help computational chemists aiming to start the study of SACs. On the other hand, experimentalists could find the critical analysis of DFT results of interest to understand better the strengths and weaknesses of simulations, and how to interpret computational results. After an introductory section of SACs, we start by briefly presenting the state-of-the-art methodologies. Then, we analyze the critical aspects for a reliable prediction of the electronic properties, and we discuss the robustness of the structural models and ways to validate them. Furthermore, we discuss the main approaches to predict catalytic activity and selectivity, which is the final goal of the computational catalysis. We conclude this review with a critical analysis of the current challenges in the field, and the main limitations of the modeling approaches that are described.

25 ENERGY STORAGE↗
DOE OSTI2024

Evaluation of acidity of hierarchical zeolites using a potentiometric titration method

The method of potentiometric titration and corresponding determination of pK a of acid sites by the Gran method was applied for hierarchical zeolite materials. For hierarchical Al-, Ga- and B-silicate zeolites of MOR, BEA, MFI and MTW structural types with the morphology of aggregated nanosheets, nanorods or close to spherical nanoparticles, the distribution of acid sites by strength was determined. Furthermore, the dependence of the acidity spectrum (strength of acid sites) on the type of zeolite structure and the nature of an isomorphously substituted cation, on the one hand, and on the morphology of zeolite nanocrystals, on the other hand, was demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantum gravity phenomenology at the dawn of the multi-messenger era—A review

The exploration of the universe has recently entered a new era thanks to the multi-messenger paradigm, characterized by a continuous increase in the quantity and quality of experimental data that is obtained by the detection of the various cosmic messengers (photons, neutrinos, cosmic rays and gravitational waves) from numerous origins. They give us information about their sources in the universe and the properties of the intergalactic medium. Moreover, multi-messenger astronomy opens up the possibility to search for phenomenological signatures of quantum gravity. On the one hand, the most energetic events allow us to test our physical theories at energy regimes which are not directly accessible in accelerators; on the other hand, tiny effects in the propagation of very high energy particles could be amplified by cosmological distances. After decades of merely theoretical investigations, the possibility of obtaining phenomenological indications of Planck-scale effects is a revolutionary step in the quest for a quantum theory of gravity, but it requires cooperation between different communities of physicists (both theoretical and experimental). This review, prepared within the COST Action CA18108 “Quantum gravity phenomenology in the multi-messenger approach”, is aimed at promoting this cooperation by giving a state-of-the art account of the interdisciplinary expertise that is needed in the effective search of quantum gravity footprints in the production, propagation and detection of cosmic messengers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

An Ab initio based OH initiated oxidation kinetics of glycerol carbonate: A promising biofuel component

The global energy demand is steadily increasing because of the population explosion and economic growth. Fossil fuels supply around 85 % of global primary energy demand. On one hand, fulfilling the increasing energy demands is a big challenge for the next few decades. On the other hand, the continued burning of fossil fuels leads to higher CO2 emissions, severely impacting global warming. Therefore, the policymakers vow to shift from conventional fuels to renewable resources for economic, environmental, and future energy security reasons. In this context, biofuels from lignocellulosic biomass and/or carbon-neutral fuels produced in the sustainable carbon cycle can close the carbon cycle and reach net zero-carbon emission. Recently, glycerol carbonate has been proposed as a promising fuel or fuel additive for future sustainability. Therefore, we investigated the hydrogen abstraction reactions of glycerol carbonate (GC) by OH radicals using high-level ab initio and variational transition state theory calculations. We mapped out the potential energy surface using the CCSD(T)/cc-pV(D, T)Z//MP2/cc-pVTZ level of theory. Here we used the ab initio parameters to obtain the site-specific rate coefficients by employing the variational transition state theory. We observed that every hydrogen atom in GC displays a unique reactivity with OH radicals. We derived branching ratio of each channel that are difficult to access experimentally. The overall rate coefficients exhibit a strong non-Arrhenius behaviour, which can be represented as: $k^{CVT/SCT}_{ov}$ (T) = 3.39 x 10 -20 x T 2.659 x e$\frac{-750.0 Jmol^{-1}}{RT}$ $\frac{cm^{3}}{molecule s}$ This is the first reported rate data for the glycerol carbonate and OH radicals reaction.

09 BIOMASS FUELS↗
DOE OSTI2022

Microscale spatial distribution and soil organic matter persistence in top and subsoil

The spatial distribution of organic substrates and microscale soil heterogeneity significantly influence organic matter (OM) persistence as constraints on OM accessibility to microorganisms. However, it is unclear how changes in OM spatial heterogeneity driven by factors such as soil depth affect the relative importance of substrate spatial distribution on OM persistence. This work evaluated the decomposition and persistence of 13 C and 15 N labeled water-extractable OM inputs over 50 days as either hotspot (i.e., pelleted in 1–2 mm-size pieces) or distributed (i.e., added as OM < 0.07 μm suspended in water) forms in topsoil (0–0.2 m) and subsoil (0.8–0.9 m) samples of an Andisol. We observed greater persistence of added C in the subsoil with distributed OM inputs relative to hotspot OM, indicated by a 17% reduction in cumulative mineralization of the added C and a 10% higher conversion to mineral-associated OM. A lower substrate availability potentially reduced mineralization due to OM dispersion throughout the soil. NanoSIMS (nanoscale secondary ion mass spectrometry) analysis identified organo-mineral associations on cross-sectioned aggregate interiors in the subsoil. On the other hand, in the topsoil, we did not observe significant differences in the persistence of OM, suggesting that the large amounts of particulate OM already present in the soil outweighed the influence of added OM spatial distribution. Here, we demonstrated under laboratory conditions that the spatial distribution of fresh OM input alone significantly affected the decomposition and persistence of OM inputs in the subsoil. On the other hand, spatial distribution seems to play a lower role in topsoils rich in particulate OM. The divergence in the influence of OM spatial distribution between the top and subsoil is likely driven by differences in soil mineralogy and OM composition.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Transmission electron microscopy with in-situ ion irradiation: Facilities and community

Whilst there is a clear scientific and technological need for the technical capabilities of transmission electron microscopes with in-situ ion irradiation, it also requires a collaborative community of international researchers to support such facilities in successfully meeting this demand. Instruments of this type serve to provide fundamental understanding of the mechanisms which drive changes in materials important to nuclear fission and fusion energy, the semiconductor industry, quantum information systems, space travel, astronomy, geology and many more applications. As these areas continue to evolve and the instrumentation possibilities expand, the capacity of in-situ ion irradiation facilities must also develop hand-in-hand with the user community to deliver an ever-greater diversity of high-fidelity extreme-environment experimentation. Future directions for the field, such as miniaturization from MEMS/microfluidic devices and advanced controls with ML-based analysis, continuously emerge to advance both the hardware and software which support the coupling of TEMs with ion beams. This review sets out to provide up-to-date insights into the community and advancement of current, and development of future, facilities which have the potential to further unlock access to the nanoscale exploration of coupled extreme environments crucial to many of the important science and engineering challenges we face today.

In-situ irradiation↗
DOE OSTI2021

The aging proteostasis decline: From nematode to human

The aging proteostasis decline manifests in a failure of aging cells and organisms to properly respond to proteotoxic challenges. This proteostasis collapse has long been considered a hallmark of aging in nematodes, and has recently been shown to occur also in human cells upon entry to senescence, opening the way to exploring the phenomenon in the broader context of human aging. Cellular senescence is part of the normal human physiology of aging, with senescent cell accumulation as a prominent feature of aged tissues. Being highly resistant to cell death, senescent cells, as they accumulate, become pro-inflammatory and promote disease. Here we discuss the causes of human senescence proteostasis decline, in view of the current literature on nematodes, on the one hand, and senescence, on the other hand. We review two major aspects of the phenomenon: (1) the decline in transcriptional activation of stress-response pathways, and (2) impairments in proteasome function. We further outline potential underlying mechanisms of transcriptional proteostasis decline, focusing on reduced chromatin dynamics and compromised nuclear integrity. Finally, we discuss potential strategies for reinforcing proteostasis as a means to improve organismal health and address the relationship to senolytics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Formation and surface melting of nanoparticle superlattices in a solution

The wisdom in the saying of “There are no two snowflakes alike” lies in the importance of history or kinetic pathways in the phase transitions of solids. Likewise, “artificial solids,” namely superlattices consisting of functional nanoparticles, have lattice size, surface morphology, crystallinity, symmetry, and structural reconfiguration (for example, transition into a disordered state) highly dependent on the kinetic pathways as the nanoparticles interact with each other in solution [1]. Great progresses have been made in understanding the formation pathways of superlattices using liquid-phase transmission electron microscopy (TEM) [2-4]. For example, by tracking single nanoparticle’s trajectories, especially aided by U-net neural network-based machine learning, previous studies mapped the fundamental nanoparticle interactions at nanometer resolution [5]. Nonclassical, two-step nucleation pathway has also been elucidated in the system of nanoprisms, by optimizing protocols such as loading nanoparticle suspensions over the supersaturation threshold and minimizing particle‒substrate interaction [2]. Surface morphologies or exposed facets of superlattices have been shown to follow the principles of Wulff construction rule, where the facet-dependent surface energy can be measured based on the capillary wave theory [4]. However, the reverse process of crystallization of superlattices, the conversion from crystalline to disordered state, has been much less explored. On one hand, the melting of nanoparticle superlattices can provide a preferred pathway to induce structural reorganization or shuffling of building blocks for them to transform into different types of crystal structures. On the other hand, understanding nanoscale superlattice melting and comparing such behaviors with the prevailing surface melting theories developed for atomic/molecular solids can provide a potent way to engineer phase transitions of supra- and hierarchical structures constructed from nanoscale entities (e.g., DNA-coated nanoparticles, proteins), for their applications in reprogrammable and switchable materials with multifunctional properties [6, 7]. The experimental challenges to observe melting of superlattices are twofold. Practically it is difficult to load the initial superlattice form, in an intact manner, into the highly confined liquid-phase TEM chamber for in-situ observation. Here, the triggering of melting also needs meticulous manipulation of nanoparticle concentration, interparticle interaction, and solution environment.

Kim, Ahyoung↗
DOE OSTI2023

Electrical Shock During Phone Assisted Troubleshooting of Laboratory Equipment

We report researchers have the potential to be exposed to a wide variety of hazards inherent to the equipment they use and maintain. When equipment does not function as expected, researchers sometimes reach out to their vendors for assistance. Early diagnostic or troubleshooting interactions between researcher and vendor are often conducted over the telephone and can lead to researchers performing work outside of their area of expertise and exposure to unknown hazards. This type of interaction significantly contributed to an incident where during diagnostic activities a researcher accidentally contacted, and discharged, a capacitor in an X-ray diffraction instrument. While this incident did not produce a serious injury, if the capacitor discharge path had occurred hand-to-hand across the heart, a serious injury may have been possible.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Transforming the Process Industries through Electrification: Challenges and Opportunities

For the more than 70 years, the process industries have provided essential fuels and materials for global growth. Increased manufacturing production comes with substantial environmental impact. Reducing environmental impact through process electrification, carbon capture, and other emerging technologies would require large changes throughout the process industries. We review opportunities and challenges related to electrification, focusing on technical, operational, and economic considerations. Here, we conclude that electrification could completely eliminate scope 1 CO 2 emissions, increase product quality, and reduce the equipment size and cost. On the other hand, it calls for a significant expansion of power generation capacity, as well as new paradigms for process design and operations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗