Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Field-theoretic parametrization of low-energy nucleon form factors

A field-theoretic parametrization is proposed for nucleon electromagnetic form factors at momentum transfer less than 600 MeV. The parametrization is part of a larger effective field theory Lagrangian that is Lorentz covariant and chirally symmetric and that has been used to successfully describe bulk and single-particle properties of medium- to heavy-mass nuclei. The parametrization is based on vector meson dominance and a derivative expansion of nucleon couplings to the electromagnetic fields. At lowest order in the expansion, it is possible to fit all four parameters to modern data on the rms radii of the nucleon form factors. At next-to-leading order it is possible to fit the form factors to within a few percent up to momentum transfers of 600 MeV. The vector meson dominance contributions are crucial in this fit, because a simple expansion in powers of momentum transfer would require many terms to achieve comparable accuracy. The ability to fit single-nucleon form factors up to 600 MeV momentum transfer makes possible the study of two-body electromagnetic exchange currents within this effective field theory framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Soft spectator scattering in the nucleon form factors at large Q{sup 2} within the soft collinear effective theory approach

The proton form factors at large momentum transfer are dominated by two contributions which are associated with the hard and soft rescattering, respectively. Motivated by a very active experimental form factor program at intermediate values of momentum transfers, Q{sup 2}{approx}5-15 GeV{sup 2}, where an understanding in terms of only a hard rescattering mechanism cannot yet be expected, we investigate in this work the soft rescattering contribution using soft collinear effective theory (SCET). Within such a description, the form factor is characterized, besides the hard scale Q{sup 2}, by a hard-collinear scale Q{Lambda}, which arises due to the presence of soft spectators, with virtuality {Lambda}{sup 2} ({Lambda}{approx}0.5 GeV), such that Q{sup 2}>>Q{Lambda}>>{Lambda}{sup 2}. We show that in this case a two-step factorization can be successfully carried out using the SCET approach. In a first step (SCET{sub I}), we perform the leading-order matching of the QCD electromagnetic current onto the relevant SCET{sub I} operators and perform a resummation of large logarithms using renormalization group equations. We then discuss the further matching onto a SCET{sub II} framework, and propose the factorization formula (accurate to leading logarithmic approximation) for the Dirac form factor, accounting for both hard and soft contributions. We also present a qualitative discussion of the phenomenological consequences of this new framework.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New Precision Limit on the Strange Vector Form Factors of the Proton

The parity-violating cross-section asymmetry in the elastic scattering of polarized electrons from unpolarized protons has been measured at a four-momentum transfer squared Q 2 = 0.624 GeV 2 and beam energy E b = 3.48 GeV to be A PV = -23.80 ± 0.78 (stat) ± 0.36 (syst) parts per million. This result is consistent with zero contribution of strange quarks to the combination of electric and magnetic form factors G E s + 0.517 G M s = 0.003 ± 0.010 (stat) ± 0.004 (syst) ± 0.009 (ff), where the third error is due to the limits of precision on the electromagnetic form factors and radiative corrections. With this measurement, the world data on strange contributions to nucleon form factors are seen to be consistent with zero and not more than a few percent of the proton form factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multi-phase glass-ceramics as a waste form for combined fission products: alkalis, alkaline earths, lanthanides, and transition metals

In this study, multi-phase silicate-based glass-ceramics were investigated as an alternate waste form for immobilizing non-fissionable products from used nuclear fuel. Currently, borosilicate glass is the waste form selected for immobilization of this waste stream, however, the low thermal stability and solubility of MoO{sub 3} in borosilicate glass translates into a maximum waste loading in the range of 15-20 mass%. Glass-ceramics provide the opportunity to target durable crystalline phases, e.g., powellite, oxyapatite, celsian, and pollucite, that will incorporate MoO{sub 3} as well as other waste components such as lanthanides, alkalis, and alkaline earths at levels 2X the solubility limits of a single-phase glass. In addition a glass-ceramic could provide higher thermal stability, depending upon the properties of the crystalline and amorphous phases. Glass-ceramics were successfully synthesized at waste loadings of 42, 45, and 50 mass% with the following glass additives: B{sub 2}O{sub 3}, Al{sub 2}O{sub 3}, CaO and SiO{sub 2} by slow cooling form from a glass melt. Glass-ceramics were characterized in terms of phase assemblage, morphology, and thermal stability. The targeted phases: powellite and oxyapatite were observed in all of the compositions along with a lanthanide borosilicate, and cerianite. Results of this initial investigation of glass-ceramics show promise as a potential waste form to replace single-phase borosilicate glass.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The electric and magnetic form factors of the neutron with super BigBite

Electromagnetic form factors provide experimental access to information about the underlying quark charge and magnetic moment distributions of the nucleon. By performing measurements of these form factors and comparing them to theories containing important aspects of QCD, we gain insight into the generation nucleon structure. Measurements of the form factors of the neutron are generally over a smaller range of Q2 compared to that of the proton, but are are equally as important to complete our picture of the nucleon. Presented are two approved experiments using the proposed Super Bigbite spectrometer which will extend these measurements to a range of Q2 comparable to that of the present proton form factors as well as with comparable precision.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DuraLith Alkali-Aluminosilicate Geopolymer Waste Form Testing for Hanford Secondary Waste

The primary objective of the work reported here was to develop additional information regarding the DuraLith alkali aluminosilicate geopolymer as a waste form for liquid secondary waste to support selection of a final waste form for the Hanford Tank Waste Treatment and Immobilization Plant secondary liquid wastes to be disposed in the Integrated Disposal Facility on the Hanford Site. Testing focused on optimizing waste loading, improving waste form performance, and evaluating the robustness of the waste form with respect to waste variability.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Data Package for Secondary Waste Form Down-Selection—Cast Stone

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

MODELING SOLIDIFICATION-INDUCED STRESSES IN CERAMIC WASTE FORMS CONTAINING NUCLEAR WASTES

The goal of this work is to produce a ceramic waste form (CWF) that permanently occludes radioactive waste. This is accomplished by absorbing radioactive salts into zeolite, mixing with glass frit, heating to a molten state 915 C to form a sodalite glass matrix, and solidifying for long-term storage. Less long term leaching is expected if the solidifying cooling rate doesn’t cause cracking. In addition to thermal stress, this paper proposes that a stress is formed during solidification which is very large for fast cooling rates during solidification and can cause severe cracking. A solidifying glass or ceramic cylinder forms a dome on the cylinder top end. The temperature distribution at the time of solidification causes the stress and the dome. The dome height, “the length deficit,” produces an axial stress when the solid returns to room temperature with the inherent outer region in compression, the inner in tension. Large tensions will cause cracking of the specimen. The temperature deficit, derived by dividing the length deficit by the coefficient of thermal expansion, allows solidification stress theory to be extended to the circumferential stress. This paper derives the solidification stress theory, gives examples, explains how to induce beneficial stresses, and compares theory to experimental data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Getters for improved technetium containment in cementitious waste forms

A cementitious waste form, Cast Stone, is a possible candidate technology for the immobilization of low activity nuclear waste (LAW) at the Hanford site. This paper focuses on the addition of getter materials to Cast Stone that can sequester Tc from the LAW, and in turn, lower Tc release from the Cast Stone. Two getters which produce different products upon sequestering Tc from LAW were tested: Sn(II) apatite (Sn-A) that removes Tc as a Tc(IV)-oxide and potassium metal sulfide (KMS-2) that removes Tc as a Tc(IV)-sulfide species, allowing for a comparison of stability of the form of Tc upon entering the waste form. The Cast Stone with KMS-2 getter had the best performance with addition equivalent to ~0.08 wt% of the total waste form mass. The observed diffusion (D obs ) of Tc decreased from 4.6 ± 0.2 × 10 -12 cm 2 /s for Cast Stone that did not contain a getter to 5.4 ± 0.4 × 10 -13 cm 2 /s for KMS-2 containing Cast Stone. Finally, it was found that Tc-sulfide species are more stable against re-oxidation within getter containing Cast Stone compared with Tc-oxide and is the origin of the decrease in Tc D obs when using the KMS-2.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Viscosity anomaly of a metallic glass-forming liquid under high pressure

Viscosity, as a critical property closely associated with the glass-forming ability of a liquid, has been extensively studied with varying temperatures. However, its pressure dependence has not been well explored yet due to experimental difficulties. Here, we measured the viscosity of a metallic glass-forming liquid, Zr 46 Cu 37.6 Ag 8.4 Al 8 , at pressures up to 6.1 GPa above the melting points by falling-sphere viscometry with ultrafast synchrotron x-ray imaging. Overall, the viscosity increases with pressure, while surprisingly, there is an abrupt drop between 3.2 GPa and 3.7 GPa, indicating the possible existence of a pressure-induced liquid-to-liquid transition. Pressure could change the short- and medium-range orders in the multicomponent glass-forming liquid, as suggested by the different crystalline outcomes after cooling to room temperature at high- and low-pressure ranges. In conclusion, our work extended the viscosity investigation of metallic glass-forming liquids to the high-pressure regime, which will expand our understanding of liquid-liquid transitions and metallic glass formation.

36 MATERIALS SCIENCE↗

Physical properties of an alumino-silicate waste form for cesium and strontium.

Nuclear fuel reprocessing will be required to sustain nuclear power as a baseload energy supplier for the world. New reprocessing schemes offer an opportunity to develop a better strategy for recycling elements in the fuel and preparing stable waste forms. Advanced strategies could create a waste stream of cesium, strontium, rubidium, and barium. Some physical properties of a waste form containing these elements sintered into bentonite clay were evaluated. We prepared samples loaded to 27% by mass to a density of approximately 3 g/cm{sup 3}. Sintering temperatures of up to 1000 C did not result in volatility of cesium. Instead, the crystallinity noticeably increased in the waste form as temperatures increased from 600 to 1000 C. Assemblages of silicates were formed. Significant water evolved at approximately 600 C but no other gases were generated at higher temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tellurite glass as a waste form for a simulated mixed chloride waste stream: Candidate materials selection and initial testing

Tellurite glasses have been researched widely for the last 60 years since they were first introduced by Stanworth. These glasses have been primarily used in research applications as glass host materials for lasers and as non-linear optical materials, though many other uses exist in the literature. Tellurite glasses have long since been used as hosts for various, and even sometimes mixed, halogens (i.e., multiple chlorides or even chlorides and iodides). Thus, it was reasonable to expect that these types of glasses could be used as a waste form to immobilize a combination of mixed chlorides present in the electrochemical separations process involved with fuel separations and processing from nuclear reactors. Many of the properties related to waste forms (e.g., chemical durability, maximum chloride loading) for these materials are unknown and thus, in this study, several different types of tellurite glasses were made and their properties studied to determine if such a candidate waste form could be fabricated with these glasses. One of the formulations studied was a lead tellurite glass, which had a low sodium release and is on-par with high-level waste silicate glass waste forms.

electrochemical↗

The infinite level normal forms for non-resonant double Hopf singularities

Here, in this paper, we explore hypernormal forms of vector fields that have non-resonant double Hopf singularities with a non-zero radial cubic part. Our primary focus is on investigating the infinite-level normal form classification of this type of singularities. We provide a normal form decomposition in terms of planar-rotating and planar-radial vector fields, which greatly facilitate the pattern recognition and analysis of the corresponding generalized homological maps. Notably, our paper represents the first instance of the normal form classification for general non-resonant double Hopf singularities without structural symmetry.

97 MATHEMATICS AND COMPUTING↗

Nucleon electromagnetic form factors in a hypercentral quark model

We study the nucleon electromagnetic form factors within the frame work of hypercentral quark model. We have calculated nucleon electromagnetic form factors at low Q{sup 2}. We calculate the nucleon form factors using hypercentral wave function. The general nature of the nucleon form factors at low Q{sup 2} is consistent with the experimental results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measuring the axial form factor of {sup 3}He using weak capture of polarized electrons

A low energy, high intensity polarized electron beam could enable the extraction of the A=3 weak axial form factors F{sub A} using the reaction →e+{sup 3}He→{sup 3}H+ν. These form factors have never been measured before. We discuss the feasibility of such an experiment using a small toroidal magnet and a radial low energy recoil detector to tag the recoil tritons. A moderately high intensity polarized electron beam (>500 μA) with beam energies between 50 - 150 MeV is necessary for the cross section measurement and to provides a free clean measurement of the background. Moreover, in addition to the cross section, by measuring the electron spin and recoil triton correlation coefficient it may be possible to search for second class currents and to extract the ratio of the axial to the vector form factor of the nucleon. Such novel electron scattering based measurements would have a completely different set of systematic uncertainties compared to polarized neutron beta decay, neutrino scattering and muon capture experiments which are typically used to extract the weak form-factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A small-form-factor piezoelectric vibration energy harvester using a resonant frequency-down conversion

While environmental vibrations are usually in the range of a few hundred Hertz, small-form-factor piezoelectric vibration energy harvesters will have higher resonant frequencies due to the structural size effect. To address this issue, we propose a resonant frequency-down conversion based on the theory of dynamic vibration absorber for the design of a small-form-factor piezoelectric vibration energy harvester. The proposed energy harvester consists of two frequency-tuned elastic components for lowering the first resonant frequency of an integrated system but is so configured that an energy harvesting beam component is inverted with respect to the other supporting beam component for a small form factor. Furthermore, in order to change the unwanted modal characteristic of small separation of resonant frequencies, as is the case with an inverted configuration, a proof mass on the supporting beam component is slightly shifted toward a second proof mass on the tip of the energy harvesting beam component. The proposed small-form-factor design capability was experimentally verified using a fabricated prototype with an occupation volume of 20 × 39 × 6.9 mm{sup 3}, which was designed for a target frequency of as low as 100 Hz.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analytical evaluation of atomic form factors: Application to Rayleigh scattering

Atomic form factors are widely used for the characterization of targets and specimens, from crystallography to biology. By using recent mathematical results, here we derive an analytical expression for the atomic form factor within the independent particle model constructed from nonrelativistic screened hydrogenic wave functions. The range of validity of this analytical expression is checked by comparing the analytically obtained form factors with the ones obtained within the Hartee-Fock method. As an example, we apply our analytical expression for the atomic form factor to evaluate the differential cross section for Rayleigh scattering off neutral atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extending the limits of powder diffraction analysis: diffraction parameter space, occupancy defects, and atomic form factors

Although the determination of site occupancies is often a major goal in Rietveld refinement studies, the accurate refinement of site occupancies is exceptionally challenging due to the many correlations and systematic errors that have a hidden impact on the final refined occupancy parameters. Through the comparison of results independently obtained from neutron and synchrotron powder diffraction, improved approaches capable of detecting occupancy defects with an exceptional sensitivity of 0.1% (absolute) in the class of layered NMC Li-ion battery cathode materials have been developed. A new method of visualizing the diffraction parameter space associated with crystallographic site scattering power through the use of f* diagrams is described and this method is broadly applicable to ternary compounds. The f* diagrams allow the global minimum fit to be easily identified and also permit a robust determination of the number and type of occupancy defects within a structure. Through a comparison of neutron and X-ray diffraction results, a systematic error in the synchrotron results was identified using f* diagrams for a series of NMC compounds. Using neutron diffraction data as a reference, this error was shown to specifically result from problems associated with the neutral oxygen X-ray atomic form factor and could be eliminated by using the ionic O 2- form factor for this anion while retaining the neutral form factors for cationic species. The f* diagram method offers a new opportunity to experimentally assess the quality of atomic form factors through powder diffraction studies on chemically related multi-component compounds.

25 ENERGY STORAGE↗