Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flux analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A comprehensive experimental and kinetic modeling study of di-isobutylene isomers: Part 2

A wide variety of high temperature experimental data obtained in this study complement the data on the oxidation of the two di-isobutylene isomers presented in Part I and offers a basis for an extensive validation of the kinetic model developed in this study. Due to the increasing importance of unimolecular decomposition reactions in high-temperature combustion, we have investigated the di-isobutylene isomers in high dilution utilizing a pyrolysis microflow reactor and detected radical intermediates and stable products using vacuum ultraviolet (VUV) synchrotron radiation and photoelectron photoion coincidence (PEPICO) spectroscopy. Additional speciation data at oxidative conditions were also recorded utilizing a plug flow reactor at atmospheric pressure in the temperature range 725-1150 K at equivalence ratios of 1.0 and 3.0 and at residence times of 0.35 s and 0.22 s, respectively. Combustion products were analyzed using gas chromatography (GC) and mass spectrometry (MS). Ignition delay time measurements for di-isobutylene were performed at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 diluted in 'air' in the temperature range 900-1400 K using a high-pressure shock-tube facility. New measurements of the laminar burning velocities of di-isobutylene/air flames are also presented. The experiments were performed using the heat flux method at atmospheric pressure and initial temperatures of 298-358 K. Moreover, data consistency was assessed with the help of analysis of the temperature and pressure dependencies of laminar burning velocity measurements, which was interpreted using an empirical power-law expression. Electronic structure calculations were performed to compute the energy barriers to the formation of many of the product species formed. The predictions of the present mechanism were found to be in adequate agreement with the wide variety of experimental measurements performed.

09 BIOMASS FUELS↗
DOE OSTI2020

Analytical Determination of Radioactive Strontium and Cesium by Thermal Ionization Mass Spectrometry

Thermal ionization mass spectrometry (TIMS) has been evaluated for the detection of the radioactive isotopes of strontium and cesium. The instrument was investigated for the analysis of isotopic ratios of 89Sr to 90Sr and 135Cs to 137Cs in the presence of atomic isobars (Y and Zr for Sr analysis and Ba for Cs analysis). Signicant discrimination using TIMS was found for both Sr and Cs through evaluation using stable isotopes. Fusion procedures with different flux were evaluated for preparation of sample matrices. Chemical separations were developed and used after fusion to isolate the Sr and Cs from a prepared background matrix (i.e., Montana Soil). A graded approach, increasing in stable background isotopes, was performed to monitor the chemistry and instrument response. A thermal neutron irradiation was performed to produce a sample that contained the radioisotopes of Sr and Cs. Even though the irradiated sample was not a certified standard it does provide accurate expectation values via published, well understood cumulative fission yield data. The results presented in this work correlate extremely well with the published data. Furthermore, a significant decrease in uncertainty (by a factor of 5 { 10) was found for the isotopic ratios measured with TIMS compared to the published values.

TIMS, environmental contamination, radiostrontium,↗
DOE OSTI2021

Parameter dependencies of the experimental nitrogen concentration required for detachment on ASDEX Upgrade and JET

While current tokamak experiments are beginning to use real-time feedback control systems to manage the plasma exhaust, future tokamaks still require validation of theoretical models used to predict the threshold impurity concentration required to sufficiently reduce the power and particle fluxes to the divertor. This work exploits new spectroscopic measurements of the divertor nitrogen concentration, c n , in partially detached N 2 -seeded H-mode plasmas on ASDEX Upgrade (AUG) and JET with the ITER-Like Wall (JET-ILW) to test the parameter dependencies of the power flowing to the outer divertor, P div,outer , and the separatrix electron density, n e.sep . A least-squares regression of the AUG measurements demonstrates that the threshold c n required for detachment scales as $c_n∝P^{1.19±0.32}_{div,outer}n^{-2.77±0.36}_{e,sep}$. This scaling of n e,sep is also consistent with the measurements from JET which, at constant P div,outer , show $c_n∝n^{-2.43±0.27}_{e,sep}$. The dependencies of P div,outer and n e.sep is demonstrated over at least a factor of two change in both parameters and indicates a stronger dependence on n e.sep in comparison to the Lengyel model, which could be due to the assumption in this model that the heat flux channel width is independent of density. This first assessment of detachment scaling with impurity seeding highlights the need for further analysis of the systematic uncertainties of the measurement and more consistent scenarios from more tokamaks to investigate the machine size scaling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Reconstruction of current profiles from external magnetic and MSE measurements on DIII-D

This work introduces a new current model into the EFIT code for plasma current profile reconstruction. Using this model, edge-localized current density profiles are reconstructed solely from external magnetic measurements. Quantitative comparisons show that edge current profiles obtained with the new current model align closely with those from kinetic equilibrium reconstruction. The new model enables current density reconstruction with fewer diagnostics than kinetic equilibrium reconstruction (Lao et al 1990 Nucl. Fusion 30 1035–49), demonstrating that edge-localized current density information can be obtained from external magnetic measurements only, without the help of kinetic profiles and internal diagnostics, and without using the bootstrap current model. Furthermore, with the constraints of external magnetic and MSE measurements, current profiles in full radius obtained from the new model are in good agreement with the results of kinetic equilibrium reconstruction, which not only improves the efficiency of current reconstruction but also helps avoid possible errors caused by different kinds of diagnoses. Possible applications are also discussed, and a brief analysis of the evolution of the full-radius current density is performed. Noticeable decreases in both the magnitude and gradient of the edge current around the time of ELM bursts are observed. Moreover, analysis of the full radius current density profiles ( ρ N = 0 − 1.0, ρN denotes to square root of the normalized toroidal flux) reveals that as the edge current changes, the inner current also changes following a sinusoidal-like pattern at almost all time slices during four type-I ELMs in discharge 161493. The current evolution in the inner region ( ρ N = 0.2 − 0.6) is synchronized with the boundary region ( ρ N = 0.89 − 1.0), while the intermediate region ( ρ N = 0.6 − 0.89) shows opposite behavior. This sinusoidal-like variations in full-radius current density profile indicates strong core-pedestal coupling, suggesting ELMs significantly affect core plasmas, though current changes manifest differently across radial regions.

EFIT↗
DOE OSTI2020

Characterization of Uranium Foil Irradiations at the WSU TRIGA Reactor Using a New Reactor Model in Scale

A new reactor model of the Washington State University TRIGA was developed in the SCALE neutron transport code, and its fidelity was verified by comparison to MCNP and available data for several reactor parameters. The model was used to characterize irradiations designed to produce the short-lived actinides 237 U and 239 U, two key isotopes for nuclear forensics. These short-lived actinides, their decay daughters 237Np and 239Pu, and total fissions (via 99 Mo) were measured in irradiated foils at Los Alamos National Laboratory and other labs with good agreement among parent/daughter pairs and among labs. The laboratory-measured isotope ratios were used as a benchmark for the model determination of reaction rates. The flux distribution in the foils was also determined. Finally, using the continuous energy TSUNAMI-3D module of SCALE, a sensitivity/uncertainty analysis was performed to determine the effects on foil reactions caused by other system-wide reactions and by uncertainties in the known cross-sections.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

Understanding Soil Microbial Sources of Nitrous Acid and their Effect on Carbon-Nitrogen Cycle Interactions

Descriptions of soil emissions of reactive nitrogen (NO y ) in climate models are underdeveloped or non-existent, due to the fact that details of the mechanisms leading to nitrous acid (HONO) and nitrogen di-oxide (NO 2 ) formation in soil are lacking. This represents a major gap in our understanding of a significant land-atmosphere interaction that prevents us from scaling these processes from the laboratory scale to the ecosystem and global scales. There is a critical need to include these mechanisms into climate models since NO y controls the oxidative capacity of the atmosphere and the lifetime of greenhouse gases and the rate of secondary aerosol formation that directly and indirectly affect climate. The first objective of this proposal is to conduct laboratory and field measurements of NO y fluxes from diverse soil types and determine the mechanism of biogenic NO y formation. The working hypothesis based on preliminary data is that soil HONO and NO 2 is ultimately derived from ammonia-oxidizing archaea (AOA) and bacteria (AOB) that are widespread, but whose abundance varies across ecosystems. In the case of NO 2 , reactive oxygen species derived from iron-containing minerals and heterotrophic bacteria drive NO-to-NO 2 conversion. The approach is to link soil fluxes of HONO and NO 2 to AOA, AOB, and other heterotrophs using a combination of laboratory and field experiments, isotopic analysis, and molecular techniques to address how variability in land surfaces and edaphic properties impact emissions. In addition, we will determine the effect of HONO and NO 2 on nitrogen immobilization and the photo-oxidative capacity of soil. The working hypothesis is that HONO uptake in soil will be a source of nitrosonium and hydroxyl radical that will lead to thermal- and photodegradation of soil organic matter to CO 2 and CO, and the incorporation of N in soil organic matter. We will use surface-sensitive mass spectrometry techniques and gas phase detection to study N-immobilization in soil and subsequent enhancements in reactivity that lead to decomposition of organic matter. The results will be used to reduce the uncertainty in projections from the Community Earth System Model (CESM) stemming from inaccurate representations of soil NO y emissions. The proposed research is significant because, in addition to demonstrating new mechanisms of NO y formation and loss, it will be a crucial first step towards modeling the land-atmosphere exchange of HONO and NO 2 in the CESM. Improved model treatment of land-air exchange of NO y is key for understanding feedbacks between human activity and climate, and addressing societal concerns about the fate of N and C emitted to the atmosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Analytical benchmark solution for 1-D neutron transport coupled with thermal conduction and material expansion

In this work we present fully analytical solutions for a class of finite, homogeneous, 1-D slab benchmark problems with nonlinear temperature feedback effects. The proposed class of benchmarks include multiplicative 1-D neutron transport (limited to quasistatic S{sub 2} with μ = ±1) coupled with thermal conduction, convection, Doppler broadening, and expansion effects along the length of the slab. This class of benchmark models, along with the corresponding analytical solutions, are valuable for validating multiphysics analysis frameworks that support coupled neutronics/thermal/structural calculations. Analytical solutions for the benchmarks are obtained by introducing an ansatz that the equilibrium flux and temperature distributions in the slab have the same shape. Specific values for the total microscopic cross section, σ{sub t,0}, and conductive heat transfer coefficient, h, that satisfy the assumed ansatz are then determined. A discussion of the procedure for generating benchmark models and analytical solutions is provided, along with numerical results for an example set of model parameters and thoughts on practical applications of the benchmarks for multiphysics code validation. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Lyman-$α$ forest holography: 3D predictions from 1D measurements

Cosmological analyses of Lyman-$α$ forest clustering rely on either one-dimensional correlations along individual sightlines or three-dimensional correlations between different sightlines. Because these observables probe the matter distribution on very different scales, they have traditionally been analyzed independently. In this work, we bridge this gap using ForestFlow, an emulator trained on a suite of cosmological hydrodynamical simulations that provides a unified description of Lyman-$α$ forest clustering from linear to nonlinear scales. This framework enables us to determine the range of three-dimensional clustering models compatible with the DESI one-dimensional flux power spectrum ($P_{\rm 1D}$). The resulting predictions successfully reproduce the large-scale clustering measured by the DESI BAO analysis and provide physically motivated priors on nonlinear clustering that are used in a companion paper presenting the full-shape analysis of the DESI DR2 Lyman-$α$ forest. We validate our methodology using the large-volume, high-resolution hydrodynamical simulation ACCEL-2, demonstrating excellent agreement across the full range of scales considered. Finally, we combine constraints from the $P_{\rm 1D}$ and BAO analyses on the parameter combinations $b_δσ_8$ and $b_ηf σ_8$, finding that the two probes provide comparable constraining power while exhibiting complementary parameter degeneracies. Our results establish a direct connection between one- and three-dimensional Lyman-$α$ forest measurements through ForestFlow, an approach we term Lyman-$α$ holography by analogy with the reconstruction of higher-dimensional structure from lower-dimensional information.

Chaves-Montero, J. [Barcelona, IFAE] (ORCID:000000↗
DOE OSTI2026

Characterization of lateral amorphous selenium photodetectors for low-photon and VUV detection at cryogenic temperatures

The performance of amorphous selenium (a-Se) as a cryogenic photodetector material is evaluated through a series of experiments using laterally structured devices operated in a custom optical test stand. These studies investigate the response of a-Se detectors to low-photon fluxes at high electric fields near avalanche conditions, the linearity of the photoconductive response over a wide dynamic range and the direct detection of narrowband 130 nm vacuum ultraviolet (VUV) illumination. At 87 K, matched-filter analysis shows reliable single-shot detection with efficiencies ≥80% and area under the curve (AUC) ≥ 0.85 using as few as ∼ 6800 incident 401 nm photons, corresponding to ∼ 3400 photons within field-active regions after accounting for geometric constraints. Measurements are performed at cryogenic temperatures using calibrated photon fluxes derived from a silicon photomultiplier reference and a characterized optical filter stack. Additional experiments using a tellurium-doped a-Se (a-SeTe) device explore the material's behavior under identical test conditions and demonstrate that avalanche is achievable in a-SeTe at cryogenic temperatures. The results demonstrate reproducible low-noise operation, VUV sensitivity and field-dependent gain behavior in a lateral a-Se architecture, representing the first reported observation of avalanche multiplication in laterally structured a-Se and a-SeTe devices at cryogenic temperatures. These findings support the potential integration of laterally structured a-Se devices into next-generation pixelated liquid-argon time projection chambers (TPCs) requiring scalable, high-field-compatible photon detection systems.

Amorphous selenium↗
DOE OSTI2024

On the trapped magnetic moment in type-II superconductors

In this article, measurements of the trapped (remanent) magnetic moment, M trap (H) , when a small magnetic field H is turned off after cooling below the superconducting transition temperature, T c , or ramping a magnetic field up and down after cooling in a zero magnetic field, offer substantial advantages in difficult cases of small samples and large field-dependent backgrounds, which is relevant for hydrogen-based ultra-high-T c superconductors (UHTS). Until recently, there was no need for a separate paper on the trapped magnetic flux for well-known critical-state models due to the simplicity of the physics involved. However, recent publications showed the need for such an analysis. This note summarizes the expectations for the Bean model with constant critical current density and the Kim model with field-dependent critical currents. It is shown that if the trapped moment is fitted to the power law, M trap $\propto$ H a , the fixed exponent α = 2 is exact for the Bean model, while Kim models show a wide interval of possible values, 2$\leqslant$a$\leqslant$4. Furthermore, accounting for reversible magnetization expands the range of possible exponents to 1$\leqslant$a$\leqslant$4. In addition, demagnetizing factors are essential and make the trapped moment orientation dependent even in isotropic materials. As a concrete application, it is shown that flux trapping experiments performed on H 3 S UHTS compounds can be well described using this generalized approach, lending further support to the type-II superconducting nature of H 3 S under ultra-high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Data for High Yield Production of 3-Hydroxypropionic Acid Using Issatchenkia orientalis

Biomanufacturing provides a more sustainable alternative to fossil-based chemical manufacturing. 3-Hydroxypropionic acid (3HP) is a top Department of Energy value-added chemical and precursor to bioplastics, yet cost-effective microbial production remains elusive. Here, we establish the acid-tolerant yeast Issatchenkia orientalis as a robust host for low-pH 3HP biosynthesis. Genome-scale modeling identifies the β-alanine pathway as optimal, offering the highest theoretical yield and lowest oxygen requirement. Thermodynamic analysis confirms its favorability under acidic conditions. Using sequence similarity network analysis, we discover highly active aspartate 1-decarboxylase (PAND), β-alanine-pyruvate aminotransferase (BAPAT), and 3HP dehydrogenase (YDFG), which significantly improve the pathway efficiency. Next, to further elevate the production, pathway optimization through multi-copy PAND integration, byproduct elimination (knockouts of pyruvate decarboxylase and glycerol-3-phosphate dehydrogenase), and reinforcement of aspartate flux by overexpression of pyruvate carboxylase and aspartate amino transferase improves the titer to 29 g/L in shake flasks. Fed-batch fermentation at pH 4 with low-cost corn steep liquor medium further increases the production to 92 g/L with 0.7 g/g yield and 0.55 g/L/h productivity. Techno-economic analysis indicates that such performance could potentially enable a financially viable process for sustainable acrylic acid production. This work establishes I. orientalis as a next-generation platform for cost-effective 3HP production and paves the way toward industrial commercialization.

Bioproducts↗
DOE OSTI2024

Efficient continuous Energy-Multigroup hybrid depletion scheme using the Shift Monte Carlo code. Part I: Energy condensation sensitivity analysis

Monte Carlo (MC) codes coupled to depletion solvers are increasingly used to provide high fidelity fuel cycle modeling capabilities. Here, these coupled depletion-MC tools produce accurate results in general but can experience nonphysical spatial oscillations when time steps are large or when a system’s dominance ratio approaches unity. Two substepping techniques have been developed previously to remedy and dampen these spatial oscillations without needing to reduce step sizes. The first approach relied on higher-order techniques to account for spectral changes within steps (extrapolation and interpolation techniques). The second approach used the first order perturbation (FOP) theory to account for the change in the one-group spatial flux distribution within steps. This paper develops a hybrid depletion methodology which, in a way, combines how the flux is handled in both substepping techniques. Specifically, the multigroup (MG) MC Shift code is used to update the flux distribution within steps rather than a one-group FOP solver. A fully reflected pincell is investigated, which is not spatially dependent in the MG representation. Thus, the analysis in this paper is an initial demonstration of hybrid depletion. An upcoming companion paper will focus on how the hybrid depletion dampens spatial oscillations. The hybrid depletion approach is verified to be consistent with previous constant extrapolation depletion (CED) methods. This paper finds that the hybrid CED exhibits some error in the eigenvalue and one group constants within macro steps. To address this discrepancy, a simple interpolation scheme (CELI) is investigated. This work found that CELI sufficiently addresses the discrepancy in spectrum for macro steps up to 100 days. Overall, this work demonstrates that the hybrid depletion method can significantly reduce the number of high fidelity MC executions in a MC-coupled depletion with an acceptable eigenvalue error.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Thermomechanical Stress and Creep-Fatigue Analysis of a High-Temperature Prototype Receiver for Heating Particles

This work presents a three-dimensional (3D) thermomechanical model of a prototype-scale enclosed light trapping solar receiver for heating particles. Results of the thermoelastic model are used to estimate receiver lifetime under maximum flux conditions. A computational fluid dynamics (CFD) model is first developed to predict the temperature fields in a multi-panel assembly under steady operating conditions. Solar flux distributions on the receiver are obtained from the software package SolTrace and applied to the 3D thermal model. The subsequent particle heating is captured through a simplified 1D energy balance. Panel reradiation is considered through a surface-to-surface radiation model and natural convection loss to the surrounding air is captured in a representative fluid domain surrounding the receiver. The resulting temperature fields from the CFD analysis are used as inputs for a thermoelastic mechanical model with representative boundary conditions. With the resultant temperature and stress fields, a creep-fatigue damage and lifetime analysis is performed using the linear damage accumulation (LDA) theory. The Manson-Coffin formula and Larson Miller correlation are used to calculate the fatigue and creep, respectively. A maximum damage (corresponding to a 30-year service life) is defined for design assessment. The model was first developed and verified in detail by comparing with published results in the literature (temperature and stress profiles and distributions, and creep/fatigue damage fractions) for tubular solar receivers with supercritical carbon dioxide as the working fluid. It was then implemented to model a planar-cavity receiver with various design parameters. Specifically, three different design geometries are considered, and the results show that a maximum temperature of approximately 1200 K could be reached for each design with the given incident solar flux, with the main difference being the distribution of these temperatures. Preliminary resulting stresses for the small-scale prototype without design optimization vary from 20 MPa to 250 MPa for each design, with the maximum stresses occurring on the front face and concave geometry on the side of the panel. In future work, the developed methodology shown here will be applied to analyze a full-scale (50-150 MWth) receiver.

concentrated solar power↗
DOE OSTI2025

Evaluating the limitations of Bayesian metabolic control analysis

AbstractBayesian Metabolic Control Analysis (BMCA) has emerged as a promising framework for inferring metabolic control coefficients in data-limited scenarios by integrating Bayesian inference with linlog rate laws. However, its predictive accuracy and limitations remain underexplored. This study systematically evaluates BMCA’s ability to infer elasticity values, flux control coefficients (FCCs), and concentration control coefficients (CCCs) under varying data availability conditions using three synthetic metabolic network models. Our findings highlight the strengths and weaknesses of BMCA, guiding its application in metabolic engineering and emphasizing the need for methodological refinements.Author summaryUnderstanding how enzymes control metabolic pathways is crucial for optimizing biomanufacturing and synthetic biology applications. Bayesian Metabolic Control Analysis (BMCA) is a promising computational method that integrates Bayesian inference with metabolic control analysis to estimate key control parameters, even in cases with limited experimental data. However, the accuracy and limitations of BMCA remain unclear. In this study, we systematically evaluate BMCA using three synthetic metabolic networks to determine how different types of physiological data impact its predictive performance. We find that BMCA requires flux and enzyme concentration data for accurate predictions, while external metabolite concentrations contribute little. Additionally, BMCA fails to predict elasticity values beyond a magnitude of 1.5 and reliably infer allosteric regulation, even when strong regulatory interactions exist. In addition, BMCA does not accurately rank metabolic control points, which may limit its utility in identifying key enzymes in engineered pathways. Our work provides practical insights into when and how BMCA can be applied, guiding future research in metabolic modeling and control analysis.

Shin, Janis (ORCID:0000000216572455)↗
DOE OSTI2026

Development and assessment of models for turbulent Rayleigh-Taylor mixing using the macroscopic forcing method

Reynolds-Averaged Navier Stokes (RANS) simulations are a popular method for designing ICF experiments, and accurate mixing models are crucial for these simulations to give good predictions. To this end, the present work seeks to demonstrate the Macroscopic Forcing Method (MFM) as a tool for both improving existing RANS models as well as assessing RANS model forms. First, MFM analysis from Lavacot et al. (Phys. Rev. Fluids, 2025) is used to develop the k–L–F model, an extension of the k–L model of Dimonte and Tipton (Phys. Fluids, 2006) that incorporates nonlocality through addition of a turbulent species flux transport equation. MFM is then applied to the k–L–F model along with the k–L and BHR–4 models to assess their forms and compare the model-implied eddy diffusivity moments to those measured from high-fidelity simulations. Furthermore, the analysis reveals that models incorporating nonlocality (k–L–F and BHR–4) match the high-fidelity simulation data better than purely local models (k–L), both in terms of mean fields and eddy diffusivity moments. However, all of the considered RANS models struggle to match temporal moments at high Atwood numbers, highlighting the importance of temporal nonlocality in these regimes and the need for additional improvement even among models incorporating nonlocality.

general physics↗
DOE OSTI2023

The cosmic web around the Coma cluster from constrained cosmological simulations

Galaxy clusters in the Universe occupy the important position of nodes of the cosmic web. They are connected among them by filaments, elongated structures composed of dark matter, galaxies, and gas. The connection of galaxy clusters to filaments is important, as it is related to the process of matter accretion onto the former. For this reason, investigating the connections to the cosmic web of massive clusters, especially well-known ones for which a lot of information is available, is a hot topic in astrophysics. In a previous work, we performed an analysis of the filament connections of the Coma cluster of galaxies, as detected from the observed galaxy distribution. In this work we resort to a numerical simulation whose initial conditions are constrained to reproduce the local Universe, including the region of the Coma cluster to interpret our observations in an evolutionary context. We detect the filaments connected to the simulated Coma cluster and perform an accurate comparison with the cosmic web configuration we detect in observations. We perform an analysis of the halos’ spatial and velocity distributions close to the filaments in the cluster outskirts. We conclude that, although not significantly larger than the average, the flux of accreting matter on the simulated Coma cluster is significantly more collimated close to the filaments with respect to the general isotropic accretion flux. This paper is the first example of such a result and the first installment in a series of publications which will explore the build-up of the Coma cluster system in connection to the filaments of the cosmic web as a function of redshift.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Testing the Activation Analysis for Fusion in OpenMC

OpenMC is a community-developed Monte Carlo neutron and photon transport simulation code. It can perform fission simulations such as fixed-source, k-eigenvalue, and subcritical multiplication calculations on models built using either a constructive solid geometry or CAD representation. To explore the use of OpenMC for fusion activation analysis, a detailed model of the Fusion Neutronics Science Facility (FNSF) was first developed for comparisons against an existing SERPENT model. A 90-degree model of FNSF in Standard-Triangle-Language (STL) CAD format was converted to Constructive Solid Geometry (CSG) using each code's built-in functions, and the geometries were validated by ensuring no cells overlapped and no particles were lost during simulations. The neutron fluxes were calculated and compared for multiple components close to the plasma. The results show differences mostly below 1% in fluxes and averaged 8% for activity and decay heat. Here, the work described in this study tests the CAD-based geometry using the DagMC toolkit in OpenMC and compares the activation analysis of OpenMC to SERPENT code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗