Microstructure changes and thermal conductivity reduction in UO2 following 3.9 MeV He2+ ion irradiation
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
The effect of zirconium implantation on the structure of sapphire was investigated by 175 keV Zr implantation at room temperature to a fluence of 4 1016 ions/cm2 into sapphire single crystals. Samples were examined by several experimental techniques: Rutherford backscattering spectroscopy along a channeling direction (RBS-C), electron-energy loss spectroscopy (EELS), and Z-contrast images obtained in an aberration-corrected scanning transmission electron microscope. Range and deposited energy were simulated with SRIM-2008.04. The Z-contrast images from transmission electron microscope indicated: a near surface damaged layer ~30 nm thick, a subsurface region exhibiting "random" de-channeling ~52 nm thick, and a deeper damaged, crystalline zone ~64 nm thick. The RBS-C spectra confirmed the presence of these three regions. The two damaged regions contained high concentrations of as yet unresolved defect clusters. The intermediate region contained Zr-clusters embedded in an "amorphous" matrix that exhibited short-range order corresponding to -Al2O3, i.e., a defective spinel structure. The EELS measurements show that the amorphous region is deficient in oxygen.
It is widely accepted that tendon and cartilage are adversely affected with the toxic effects of quinolones. However, the effects of quinolones on synovium have not been deciphered completely. In this study, our main objective was to investigate the effects of levofloxacin, a typical quinolone antibiotic drug, on fibroblast-like synoviocytes (FLSs) in vitro. FLSs of rabbits were treated with levofloxacin at different concentrations (0, 14, 28, 56, 112 and 224 μM). The possible cytotoxic effects of levofloxacin on FLS were determined. Levofloxacin significantly reduced the cell viabilities, gene expression of hyaluronan synthase-2 (HAS-2), and the level of hyaluronan in FLSs. Moreover, levofloxacin-induced concentration-dependent increases of apoptosis and active caspase-3 were determined in this study. Ultrastructural damages of FLSs were observed by electron microscopy. The mRNA expression levels of matrix metalloproteinase (MMP)-3 and MMP-13 were increased in FLSs treated with levofloxacin. In addition, levofloxacin played a role in suppressing the expression of interleukin (IL)-1 and IL-6. Our data suggest that the cytotoxic effects of levofloxacin on FLS were shown to be able to affect cell viability and HA synthesis capacity. The potential mechanisms of the cytotoxic effects may be attributed to the apoptosis and increased expression of MMPs. -- Highlights: ► Levofloxacin decreases hyaluronic acid synthesis in fibroblast-like synoviocytes. ► Levofloxacin exerts pro-apoptosis effects on fibroblast-like synoviocytes. ► Levofloxacin increases gene expression of MMPs in fibroblast-like synoviocytes. ► Levofloxacin exerts anti-inflammatory effects on fibroblast-like synoviocytes.
Microelectrodes modified with carbon nanotubes (CNTs) are useful for the detection of neurotransmitters because the CNTs enhance sensitivity and have electrocatalytic effects. CNTs can be grown on carbon fiber microelectrodes (CFMEs) but the intrinsic electrochemical activity of carbon fibers makes evaluating the effect of CNT enhancement difficult. Metal wires are highly conductive and many metals have no intrinsic electrochemical activity for dopamine, so we investigated CNTs grown on metal wires as microelectrodes for neurotransmitter detection. In this work, we successfully grew CNTs on niobium substrates for the first time. Instead of planar metal surfaces, metal wires with a diameter of only 25 μm were used as CNT substrates; these have potential in tissue applications due to their minimal tissue damage and high spatial resolution. Scanning electron microscopy shows that aligned CNTs are grown on metal wires after chemical vapor deposition. By use of fast-scan cyclic voltammetry, CNT-coated niobium (CNT-Nb) microelectrodes exhibit higher sensitivity and lower ΔE p value compared to CNTs grown on carbon fibers or other metal wires. The limit of detection for dopamine at CNT-Nb microelectrodes is 11 ± 1 nM, which is approximately 2-fold lower than that of bare CFMEs. Adsorption processes were modeled with a Langmuir isotherm, and detection of other neurochemicals was also characterized, including ascorbic acid, 3,4-dihydroxyphenylacetic acid, serotonin, adenosine, and histamine. CNT-Nb microelectrodes were used to monitor stimulated dopamine release in anesthetized rats with high sensitivity. This research demonstrates that CNT-grown metal microelectrodes, especially CNTs grown on Nb microelectrodes, are useful for monitoring neurotransmitters.
A primary mode for radiation damage in polymers arises from ballistic electrons that induce electronic excitations, yet subsequent chemical mechanisms are poorly understood. We develop a multiscale strategy to predict this chemistry starting from subatomic scattering calculations. Nonadiabatic molecular dynamics simulations sample initial bond-breaking events following the most likely excitations, which feed into semiempirical simulations that approach chemical equilibrium. Application to polyethylene reveals a mechanism explaining the low propensity to cross-link in crystalline samples.
Light-induced oxidation of water by photosystem II (PS II) in plants, algae and cyanobacteria has generated most of the dioxygen in the atmosphere. PS II, a membrane-bound multi-subunit pigment protein complex, couples the one-electron photochemistry at the reaction centre with the four-electron redox chemistry of water oxidation at the Mn 4 CaO 5 cluster in the oxygen-evolving complex (OEC). Under illumination, the OEC cycles through five intermediate S-states (S 0 to S 4), in which S 1 is the dark-stable state and S 3 is the last semi-stable state before O-O bond formation and O 2 evolution. A detailed understanding of the O-O bond formation mechanism remains a challenge, and will require elucidation of both the structures of the OEC in the different S-states and the binding of the two substrate waters to the catalytic site. Here we report the use of femtosecond pulses from an X-ray free electron laser (XFEL) to obtain damage-free, room temperature structures of dark-adapted (S 1), two-flash illuminated (2F; S 3 -enriched), and ammonia-bound two-flash illuminated (2F-NH 3; S 3 -enriched) PS II. Although the recent 1.95 Å resolution structure of PS II at cryogenic temperature using an XFEL provided a damage-free view of the S 1 state, measurements at room temperature are required to study the structural landscape of proteins under functional conditions, and also for in situ advancement of the S-states. To investigate the water-binding site(s), ammonia, a water analogue, has been used as a marker, as it binds to the Mn 4 CaO 5 cluster in the S 2 and S 3 states. Since the ammonia-bound OEC is active, the ammonia-binding Mn site is not a substrate water site. This approach, together with a comparison of the native dark and 2F states, is used to discriminate between proposed O-O bond formation mechanisms.
Transparent conducting oxides are highly doped semiconductors that exhibit favourable optical features compared with metals, including reduced material losses, tuneable electronic and optical properties, and enhanced damage thresholds. Recently, the photonic community has renewed its attention towards these materials, recognizing their remarkable nonlinear optical properties in the near-infrared spectrum. The exceptionally large and ultrafast change in the refractive index, which can be optically induced in these compounds, extends beyond the boundaries of conventional perturbative analysis and makes this class of materials the closest approximation to a time-varying system. Here we report the spatio-spectral fission of an ultrafast pulse trespassing a thin film of aluminium zinc oxide with a non-stationary refractive index. By applying phase conservation to this time-varying layer, our model can account for both space and time refraction and explain, in quantitative terms, the spatial separation of both spectrum and energy. Our findings represent an example of extreme nonlinear phenomena on subwavelength propagation distances, which provides new insights into transparent conducting oxides’ transient optical properties. This can be critical for the ongoing research on photonic time crystals, on-chip generation of non-classical states of light, integrated optical neural networks, ultrafast beam steering and frequency-division multiplexing.
We present results from experiments at the Linac Coherent Light Source (LCLS) demonstrating that serial femtosecond crystallography (SFX) can be performed to high resolution (,2.5 Å) using protein microcrystals deposited on an ultra-thin silicon nitride membrane and embedded in a preservation medium at room temperature. Data can be acquired at a high acquisition rate using x-ray free electron laser sources to overcome radiation damage, while sample consumption is dramatically reduced compared to flowing jet methods. We achieved a peak data acquisition rate of 10 Hz with a hit rate of ,38%, indicating that a complete data set could be acquired in about one 12-hour LCLS shift using the setup described here, or in even less time using hardware optimized for fixed target SFX. This demonstration opens the door to ultra low sample consumption SFX using the technique of diffraction-before-destruction on proteins that exist in only small quantities and/or do not produce the copious quantities of microcrystals required for flowing jet methods.
We present results of damage studies conducted at the Free Electron LASer in Hamburg (FLASH) facility with 13.5 nm (91.8 eV) and 7 nm (177.1 eV) radiations. The laser beam was focused on a sample of 890-nm-thick amorphous carbon coated on a silicon wafer mimicking a x-ray mirror. The fluence threshold for graphitization was determined for different grazing angles above and below the critical angle. The observed angular dependence of F{sub th} is explained by the variation in absorption depth and reflectivity. Moreover, the absorbed local dose needed for the phase transition leading to graphitization is shown to vary with the radiation wavelength.
Elastomeric matrix composites (EMC-rubbers) are considered as isotropic hyper elastic incompressible materials under static loading conditions. As a rubber material element cannot be extended to an infinite stretch ratio, a damage mechanism at large strain is considered. The phenomenon of cavitation plays an important role in the damage of EMCs and influences the toughening mechanism of rubber-modified plastics. Indeed, cavitation in elastomers is thought to be initiated from flaws, which grow primarily due to a hydrostatic tensile stress and ahead of the crack; there will not only be a high stress perpendicular to the plane of the crack but also significant stress components in the other direction. However, there exists historically much discussion on the evolution of the cavitation in elastomers under monotonic and/or static solicitation. Mainly, cavitation instability occurs when the stress levels are sufficiently high so that the void expansion rate becomes infinitely large. Many research works have been performed to understand the effects of rubber cavitation on toughening of plastics. In fact, the cavitation phenomenon is not well known in detail. The most popular idea states that the cavitation is related to the existence of the gas bubbles trapped in the material during the production stage and the growing of the cavities would then be the result of the growing gas bubbles. Further, instable failure mechanism at the end of the cavitation is not well known too.
This study investigates the mechanism of H{sub 2}/N{sub 2} plasma ashing damage of porous SiOCH films. Porous SiOCH films were treated by a H{sub 2}/N{sub 2} plasma using a 100-MHz capacitively coupled plasma etcher. The impact of ions, radicals, and vacuum ultraviolet radiation on the porous SiOCH films was investigated using in situ bulk analysis techniques such as spectroscopic ellipsometry and Fourier-transform infrared spectroscopy and ex situ film characterization techniques such as dynamic secondary ion mass spectrometry and x-ray photoelectron spectroscopy. In addition, plasma analysis including vacuum ultraviolet absorption spectroscopy was performed. The film characterization and plasma analysis show that the extraction of methyl by H radicals was enhanced by light while N radicals were responsible for inhibit the extraction of Si-CH{sub 3} bonds by forming nitride layer. The H{sub 2}/N{sub 2} plasma damage mechanism is discussed based on characterization of the film and plasma diagnostics.
Ceramic tiles are the main ingredient of a multi-layer multi-material composite being considered for the modernization of tank armors. The high stiffness, low attenuation, and precise dimensions of these uniform tiles make them remarkable resonators when driven to vibrate. This study is aimed at modeling the vibration modes of the tiles and the composite lay-up with finite element analysis and comparing the results with the resonance modes observed in air-coupled ultrasonic excitation of the tiles and armor samples. Defects in the tile, during manufacturing and/or after usage, are expected to change the resonance modes. The comparison of a pristine tile/lay-up and a defective tile/lay-up will thus be a quantitative damage metric. The understanding of the vibration behavior of the tile, both by itself and in the composite lay-up, can provide useful guidance to the nondestructive evaluation of armor panels containing ceramic tiles.
A fabrication method for transparent ambipolar organic thin film transistors with transparent Sb{sub 2}O{sub 3}/Ag/Sb{sub 2}O{sub 3} (SAS) source and drain electrodes has been developed. A pentacene/N,N′-ditridecylperylene-3,4,9,10-tetracarboxylic di-imide (PTCDI-C13) bilayer heterojunction is used as the active semiconductor. The electrodes are deposited by room temperature electron beam evaporation. The devices are fabricated without damaging the active layers. The SAS electrodes have high transmittance (82.5%) and low sheet resistance (8 Ω/sq). High performance devices with hole and electron mobilities of 0.3 cm{sup 2}/V s and 0.027 cm{sup 2}/V s, respectively, and average visible range transmittance of 72% were obtained. These transistors have potential for transparent logic integrated circuit applications.
To understand how molecules function in biological systems, new methods are required to obtain atomic resolution structures from biological material under physiological conditions. Intense femtosecond-duration pulses from X-ray free-electron lasers (XFELs) can outrun most damage processes, vastly increasing the tolerable dose before the specimen is destroyed. This in turn allows structure determination from crystals much smaller and more radiation sensitive than previously considered possible, allowing data collection from room temperature structures and avoiding structural changes due to cooling. Regardless, high-resolution structures obtained from XFEL data mostly use crystals far larger than 1 μm3 in volume, whereas the X-ray beam is often attenuated to protect the detector from damage caused by intense Bragg spots. Here, we describe the 2 Å resolution structure of native nanocrystalline granulovirus occlusion bodies (OBs) that are less than 0.016 μm3 in volume using the full power of the Linac Coherent Light Source (LCLS) and a dose up to 1.3 GGy per crystal. The crystalline shell of granulovirus OBs consists, on average, of about 9,000 unit cells, representing the smallest protein crystals to yield a high-resolution structure by X-ray crystallography to date. The XFEL structure shows little to no evidence of radiation damage and is more complete than a model determined using synchrotron data from recombinantly produced, much larger, cryocooled granulovirus granulin microcrystals. Furthermore, our measurements suggest that it should be possible, under ideal experimental conditions, to obtain data from protein crystals with only 100 unit cells in volume using currently available XFELs and suggest that single-molecule imaging of individual biomolecules could almost be within reach.
Photosystem II (PSII) is an intrinsic membrane protein complex that functions as a light-driven water:plastoquinone oxidoreductase in oxygenic photosynthesis. Electron transport in PSII is associated with formation of reactive oxygen species (ROS) responsible for oxidative modifications of PSII proteins. In this study, oxidative modifications of the D1 and D2 proteins by the superoxide anion (O 2 •- ) and the hydroxyl (HO•) radicals were studied in WT and a tocopherol cyclase (vte1) mutant, which is deficient in the lipid-soluble antioxidant α-tocopherol. In the absence of this antioxidant, high-resolution tandem mass spectrometry was used to identify oxidation of D1: 130 E to hydroxyglutamic acid by O 2 •- at the Pheo D1 site. Additionally, D1: 246 Y was modified to either tyrosine hydroperoxide or dihydroxyphenylalanine by O 2 •- and HO • , respectively, in the vicinity of the nonheme iron. We propose that α-tocopherol is localized near PheoD1 and the nonheme iron, with its chromanol head exposed to the lipid–water interface. This helps to prevent oxidative modification of the amino acid’s hydrogen that is bonded to PheoD1 and the nonheme iron (via bicarbonate), and thus protects electron transport in PSII from ROS damage.
Near-infrared color centers in silicon are emerging candidates for on-chip integrated quantum emitters, optical-access quantum memories, and sensing. We access ensemble G-color-center formation dynamics and radiation-induced atomic disorder in silicon for a series of megaelectronvolt proton-flux conditions. The photoluminescence results reveal that the G centers are formed more efficiently by pulsed-proton irradiation than by continuous-wave proton irradiation. The enhanced transient excitations and dynamic annealing within nanoseconds allows optimization of the ratio of G-center formation to nonradiative defect accumulation. The G centers preserve narrow line widths of about 0.1 nm when they are generated by moderate pulsed-proton fluences, while the line width broadens significantly as the pulsed-proton fluence increases. This implies vacancy or interstitial clustering by overlapping collision cascades. The tracking of G-center properties for a series of irradiation conditions enables sensitive probing of atomic disorder, serving as a complementary analytical method for sensing damage accumulation. Aided by ab initio electronic structure calculations, we provide insight into the atomic disorder induced inhomogeneous broadening by introducing vacancies, silicon interstitials, and oriented strain fields in the vicinity of a G center. A vacancy leads to a tensile strain and can result in either a red shift or a blue shift of the G-center emission, depending on its position relative to the G center. Meanwhile, Si interstitials lead to compressive strain, which results in a monotonic red shift. In conclusion, high-flux and tunable ion pulses enable the exploration of the fundamental dynamics of radiation-induced defects as well as methods for the optimization of G-center formation and qubit synthesis for quantum information processing.
We proposed a program-supporting research project in the area of fuel-cycle R&D, specifically on the topic of advanced fuels. Our goal was to investigate whether SECIS (surface engineering by concentrated interstitial solute – carbon, nitrogen) can improve the properties of austenitic stainless steels and related structural alloys such that they can be used for nuclear fuel cladding in LWRs (light-water reactors) and significantly excel currently used alloys with regard to performance, safety, service life, and accident tolerance. We intended to demonstrate that SECIS can be adapted for post-processing of clad tubing to significantly enhance mechanical properties (hardness, wear resistance, and fatigue life), corrosion resistance, resistance to stress–corrosion cracking (hydrogen-induced embrittlement), and – potentially – radiation resistance (against electron-, neutron-, or ion-radiation damage). To test this hypothesis, we measured various relevant properties of the surface-engineered alloys and compared them with corresponding properties of the non–treated, as-received alloys. In particular, we studied the impact of heat exposure corresponding to BWR (boiling-water reactor) working and accident (loss-of-coolant) conditions and the effect of ion irradiation.