Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Low-current-density LED-pumped Nd:YAG laser using a solid cylindrical reflector

The dynamic behavior of Nd:YAG lasers is theoretically analyzed. In experiments, an array of twenty GaAlAs diodes was used as the pumping light source for a Nd:YAG laser. An index-matching glass half-cylinder was used instead of the conventional hollow metal reflector. The refractive index of the half-cylinder was 1.8, which matched the refractive index of the Nd:YAG rod. A maximum CW output power of 27 mW at a current density of 207 A/sq cm was achieved using this glass half-cylinder, while 6.7 mW were obtained when a hollow metal reflector was used.

Farmer, G. I.↗

Dynamic-local-field approximation for the quantum solids

A local-molecular-field description for the ground-state properties of the quantum solids is presented. The dynamical behavior of atoms contributing to the local field, which acts on an arbitrary pair of test particles, is incorporated by decoupling the pair correlations between these field atoms. The energy, pressure, compressibility, single-particle-distribution function, and the rms atomic deviations about the equilibrium lattice sites are calculated for H2, He-3, and He-4 over the volume range from 5 to 24.5 cu cm/mole. The results are in close agreement with existing Monte Carlo calculations wherever comparisons are possible. At very high pressure, the results agree with simplified descriptions which depend on negligible overlap of the system wave function between neighboring lattice sites.

Etters, R. D.↗

Experimental and analytical studies in tilt-rotor aeroelasticity

An overview of an experimental and analytical research program for studying the aeroelastic and dynamic characteristics of tilt-rotor VTOL aircraft is presented. Selected results from several investigations of scaled models in the Langley transonic dynamics tunnel as well as some results from a test of a flight-worthy prop rotor in the NASA Ames full-scale wind tunnel are shown and discussed with a view toward delineating various aspects of dynamic behavior peculiar to prop rotor aircraft. Included are such items as prop rotor pylon stability, whirl flutter, gust response, and blade flapping. Theoretical predictions, based on analyses developed at Langley, are shown to be in agreement with the measured stability and response behavior.

Kvaternik, R. G.↗

Stability study of the Large Space Telescope /LST/ system with nonlinear CMG gimbal friction

The purpose of the investigation reported upon is to study the existence and characteristics of self-sustained oscillations in the dynamic behavior of the Large Space Telescope (LST) system due to the presence of nonlinear gimbal friction in the control moment gyroscopes (CMGs). A continuous-data single-axis model of the LST is considered. A solid friction model is used to represent CMG gimbal friction. A rigorous mathematical model is derived for use in a continuous describing function analysis. Conditions for self-sustained oscillations are then determined.

Kuo, B. C.↗

Studies of hydrodynamic events in stellar evolution. III Ejection of planetary nebulae

Investigation of the dynamic behavior of the hydrogen-rich envelope (0.101 solar mass) of an evolved star (1.1 solar mass) as the luminosity rises to 19,000 solar luminosities during the second ascent of the red-giant branch. For luminosities in the range 3100 less than L less than 19,000 solar luminosities the H-rich envelope pulsates like a long-period variable (LPV) with periods of the order of a year. As L reaches 19,000 solar luminosities, the entire H-rich envelope is ejected as a shell with speeds of a few times 10 km sec. The ejection occurs on a time scale of a few LPV pulsation periods. This ejection is shown to be related to the formation of a planetary nebula. The computations are based on an implicit hydrodynamic computer code. Tand rho-dependent opacities and excitation and ionization energies are included. As the H-rich envelope is accelerated off the stellar core, the gap between envelope and core is approximated by a vacuum filled with radiation.

Kutter, G. S.↗

Particle flow within a transonic compressor rotor passage with application to laser-Doppler velocimetry

A theoretical analysis was conducted of the dynamic behavior of micron size particles moving in the three-dimensional flow field of a rotating transonic axial-flow air compressor rotor. The particle velocity lag and angular deviation relative to the gas were determined as functions of particle diameter, mass density and radial position. Particle size and density were varied over ranges selected to correspond to typical laser-Doppler velocimeter (LDV) flow field mapping applications. It was found that the particles move essentially on gas stream surfaces and that particle tracking is relatively insensitive to the rotor radial coordinate. Velocity lag and angular deviation increased whenever particle size or mass density increased, and particle tracking was more sensitive to a change in particle diameter than to a corresponding change in mass density. Results indicated that velocity and angular deviations generally less than 1 percent and 1 degree could be achieved with 1 gm/cc tracer particles with diameters of 1 micron or less.

Maxwell, B. R.↗

A molecular-field approximation for quantum crystals

Ground-state properties of quantum crystals have received considerable attention from both theorists and experimentalists. The theoretical results have varied widely with the Monte Carlo calculations being the most successful. The molecular field approximation yields ground-state properties which agree closely with the Monte Carlo results. This approach evaluates the dynamical behavior of each pair of molecules in the molecular field of the other N-2 molecules. In addition to predicting ground-state properties that agree well with experiment, this approach yields data on the relative importance of interactions of different nearest neighbor pairs.

Danilowicz, R.↗

Analysis of RAE-1 inversion

The RAE-1 spacecraft inversion performed October 31, 1972 is described based upon the in-orbit dynamical data in conjunction with results obtained from previously developed computer simulation models. The computer simulations used are predictive of the satellite dynamics, including boom flexing, and are applicable during boom deployment and retraction, inter-phase coast periods, and post-deployment operations. Attitude data, as well as boom tip data, were analyzed in order to obtain a detailed description of the dynamical behavior of the spacecraft during and after the inversion. Runs were made using the computer model and the results were analyzed and compared with the real time data. Close agreement between the actual recorded spacecraft attitude and the computer simulation results was obtained.

Hedland, D. A.↗

Dynamic heave-pitch analysis of air cushion landing systems

A program to develop analytical tools for evaluating the dynamic performance of Air Cushion Landing Systems (ACLS) is described. The heave (vertical) motion of the ACLS was analyzed, and the analysis was extended to cover coupled heave-pitch motions. The mathematical models developed are based on a fundamental analysis of the body dynamics and fluid mechanics of the aircraft-cushion-runway interaction. The air source characteristics, flow losses in the feeding ducts, trunk and cushion, the effects of fluid compressibility, and dynamic trunk deflections, including ground contact are considered. A computer program, based on the heave-pitch analysis, was developed to simulate the dynamic behavior of an ACLS during landing impact and taxi over an irregular runway. The program outputs include ACLS motions, loadings, pressures, and flows as a function of time. To illustrate program use, three basic types of simulations were carried out. The results provide an initial indication of ACLS performance during (1) a static drop, (2) landing impact, and (3) taxi over a runway irregularity.

Captain, K. M.↗

Comparison of human driver dynamics in simulators with complex and simple visual displays and in an automobile on the road

As part of a comprehensive program exploring driver/vehicle system response in lateral steering tasks, driver/vehicle system describing functions and other dynamic data have been gathered in several milieu. These include a simple fixed base simulator with an elementary roadway delineation only display; a fixed base statically operating automobile with a terrain model based, wide angle projection system display; and a full scale moving base automobile operating on the road. Dynamic data with the two fixed base simulators compared favorably, implying that the impoverished visual scene, lack of engine noise, and simplified steering wheel feel characteristics in the simple simulator did not induce significant driver dynamic behavior variations. The fixed base vs. moving base comparisons showed substantially greater crossover frequencies and phase margins on the road course.

Mcruer, D. T.↗

Static aeroelasticity and the flying wing, revisited

The roll dynamic behavior of some wing configurations is examined. Analysis shows that the static divergence instability which occurs for symmetrical or clamped sweptforward wings is modified by roll freedom. The instability found in the present highly idealized analysis is still of an aperiodic nature, but at a speed above the conventional divergence speed. The magnitude of this difference is seen to be a function of the ratio of the wing roll mass moment of inertia to the mass moment of inertia of the wing about the roll axis, and this difference may be quite significant.

Weisshaar, T. A.↗

Simulation of aircraft crash and its validation

NASA Langley Research Center is engaged in an extensive research and development task aimed at providing the general aviation industry with reliable crashworthy airframe design technology. This paper describes the full-scale crash tests of general aviation airplanes being conducted to generate data on simulated crashes and to study the nonlinear dynamic behavior of aircraft structures. Analytical techniques under development for predicting nonlinear behavior of general airframe structures under crash-loading conditions are also described. Data are presented from the full-scale crash tests as well as comparison of analytical predictions with experimental results on some simplified structures.

Hayduk, R. J.↗

Air-cushion landing systems

Computer program based on heave/pitch analysis simulates dynamic behavior during landing impact and taxi over irregular runway. Program can be adapted to run on any computer with FORTRAN compiler.

Captain, K. M.↗

Development of procedures for calculating stiffness and damping properties of elastomers. Part 3: The effects of temperature, dissipation level and geometry

Effects of temperature, dissipation level and geometry on the dynamic behavior of elastomer elements were investigated. Force displacement relationships in elastomer elements and the effects of frequency, geometry and temperature upon these relationships are reviewed. Based on this review, methods of reducing stiffness and damping data for shear and compression test elements to material properties (storage and loss moduli) and empirical geometric factors are developed and tested using previously generated experimental data. A prediction method which accounts for large amplitudes of deformation is developed on the assumption that their effect is to increase temperature through the elastomers, thereby modifying the local material properties. Various simple methods of predicting the radial stiffness of ring cartridge elements are developed and compared. Material properties were determined from the shear specimen tests as a function of frequency and temperature. Using these material properties, numerical predictions of stiffness and damping for cartridge and compression specimens were made and compared with corresponding measurements at different temperatures, with encouraging results.

Smalley, A. J.↗

Stability and transient motion of a plain journal mounted in flexible damped supports

Results are presented for an extensive study of the influence of damped flexible supports on the stability-threshold speed of a symmetric rotor mounted in nonlinear fluid-film bearings. A stability analysis is conducted by applying the Routh criteria and calculating the damped eigenvalues of the system. Stability maps are given in dimensionless form for a range of support stiffness, damping, and mass ratios. The effect of rotor imbalance on the stability of rotor systems is examined, and it is shown that time transient orbits of shaft and support motions clearly indicate their dynamic behavior for both stable and unstable operating speeds. Simple design criteria are proposed for choosing the support stiffness and damping on the basis of rotor weight and journal clearance to promote optimum stability. It is concluded that the use of a flexible damped support system may increase the stability threshold of a plain journal bearing and that damper supports should promote smoother and quieter machine operation by suppressing oil whirl and attenuating unbalanced rotational forces.

Kirk, R. G.↗

Results of NASTRAN modal analyses and ground vibration tests on the YF-12A airplane

The YF-12A aircraft, a delta-winged vehicle powered by two jet engines, was utilized in an investigation of the structural dynamic characteristics of a large, flexible, supersonic research vehicle. A large NASA structural analysis (NASTRAN) finite-element model was used to compute the ten lowest frequency symmetric and ten lowest frequency antisymmetric modes for the YF-12A aircraft. The results of the analysis were compared with experimental data obtained in a ground vibration test conducted with the completed aircraft. It was found that the finite-element structural model employed provides an adequate prediction of the dynamic behavior of the aircraft structure in the case of basic wing and body modes.

Kordes, E. E.↗

A review of some tilt-rotor aeroelastic research at NASA-Langley

An overview of an experimental and analytical research program conducted within the Aeroelasticity Branch of the NASA Langley Research Center for studying the aeroelastic and dynamic characteristics of tilt-rotor VTOL aircraft is presented. Selected results from several joint NASA/contractor investigations of scaled models in the Langley transonic dynamics tunnel are shown and discussed with a view toward delineating various aspects of dynamic behavior peculiar to proprotor aircraft. Included are such items as proprotor/pylon stability, whirl flutter, gust response, and blade flapping. Theoretical predictions, based on analyses developed at Langley, are shown to be in agreement with the measured stability and response behavior.

Kvaternik, R. G.↗

Interplanetary disturbances caused by the August 1972 solar flares as observed by Pioneer 9

Pioneer 9 plasma and field observations at 0.78 AU were used as the basis of the analysis of the dynamic behavior of the interplanetary medium during early August, 1972. The following investigations were carried out: (1) energy and mass estimates for the solar flares of Aug. 2, 4, and 7; (2) shock wave characteristics; and (3) a numerical simulation of the first two flare-generated disturbances on Aug. 2, 4, and 7.

Dryer, M.↗