SEARCH · Engineering Papers

Results for “drag estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS2003

Gap-Opening, Disk Clearing, and the Survival of the Regular Satellites of Jupiter and Saturn

It is only recently that the theory of disk-companion interactions yields migration rates due to the gas tidal torque that are in agreement with numerical simulations and up to an order of magnitude slower than previous estimates. Also, for a weakly turbulent disk, the gap size is controlled primarily by the damping length of acoustic waves launched by the secondary at Lindblad resonances, which in turn depends on whether the waves are 2D or 3D. At least for small azimuthal wavenumbers this damping length is of the order of the radial location of the Lindblad resonance. This may have important consequences for disk dispersal in satellite systems. In the case of Jupiter, it means that the inner Galilean satellites may have jointly opened a gap. On the other hand, in Saturn's system the satellites inside of Titan are probably too small to have opened gaps in the gas disk at the time of their formation; but the possibility exists that, by effectively clearing the gas disk inside its own orbit, Titan may have allowed smaller satellites to survive, depending on whether Titan can clear the disk in a timescale comparable to the migration rates due to gas drag and gas tidal torque for these objects.

Estrada, P. R.↗

NASA NTRS1990

Prediction of forces and moments for flight vehicle control effectors. Part 1: Validation of methods for predicting hypersonic vehicle controls forces and moments

Many types of hypersonic aircraft configurations are currently being studied for feasibility of future development. Since the control of the hypersonic configurations throughout the speed range has a major impact on acceptable designs, it must be considered in the conceptual design stage. The ability of the aerodynamic analysis methods contained in an industry standard conceptual design system, APAS II, to estimate the forces and moments generated through control surface deflections from low subsonic to high hypersonic speeds is considered. Predicted control forces and moments generated by various control effectors are compared with previously published wind tunnel and flight test data for three configurations: the North American X-15, the Space Shuttle Orbiter, and a hypersonic research airplane concept. Qualitative summaries of the results are given for each longitudinal force and moment and each control derivative in the various speed ranges. Results show that all predictions of longitudinal stability and control derivatives are acceptable for use at the conceptual design stage. Results for most lateral/directional control derivatives are acceptable for conceptual design purposes; however, predictions at supersonic Mach numbers for the change in yawing moment due to aileron deflection and the change in rolling moment due to rudder deflection are found to be unacceptable. Including shielding effects in the analysis is shown to have little effect on lift and pitching moment predictions while improving drag predictions.

Maughmer, Mark D.↗

NASA NTRS1996

Interplanetary and Interstellar Dust Particles: Reentry Heating and Capture in Aerogel

Studies of interplanetary and interstellar dust can provide significant information on the evolution of the solar system or stars, respectively. However, for reliable analysis it is crucial to know how the particles have been modified during reentry (in the case of interplanetary dust particles, or [DP's) and impact into the capture medium. In the case of stratospheric capture, particles will be heated by atmospheric drag. Subsequent capture of the particles will result in heating, ablation, accretion of the capture medium and possible fragmentation. Modeling of these processes is a useful way of assessing their effects on the interpretation of the compositional data for these particles. Previous work on reentry heating has shown that heat diffusion alone cannot adequately account for temperature gradients observed in IDP's. In fact, for any reasonable thermal parameters, calculations show the particles to be nearly isothermal. Here we extend those studies to include phase transitions. These preliminary results are promising and show a significant temperature gradient for a 100 micron (diameter) particle. The actual capture of the particles in silica aerogel is being modeled using a comprehensive shock hydrodynamic code (called CTH). Various options of this code were investigated to attempt to make the most appropriate choice of methods of impact, equations of state, and processes of energy transfer from capture material to particle. The initial calculations with the code used only 'reasonable' estimates for the physical parameters of silica aerogel. Through the literature searches and personal contacts with the knowledgeable scientists, the best possible mechanical and thermal data have been made available for these computations.

Szydlik, Paul P.↗

NASA NTRS2007

Coronas-F Orbit Monitoring and Re-Entry Prediction

Russian scientific satellite CORONAS-F was launched on July, 31, 2001. The object was inserted in near-circular orbit with the inclination 82.5deg and a mean altitude approx. 520 km. Due to the upper atmosphere drag CORONAS-F was permanently descended and as a result on December, 6, 2005 it has finished the earth-orbital flight, having lifetime in space approx. 4.5 years. The satellite structural features and its flight attitude control led to the significant variations of its ballistic coefficient during the flight. It was a cause of some specific difficulties in the fulfillment of the ballistic and navigation support of this space vehicle flight. Besides the main mission objective CORONAS-F also has been selected by the Inter-Agency Space Debris Coordination Committee (IADC) as a target object for the next regular international re-entry test campaign on a program of surveillance and re-entry prediction for the hazard space objects within their de-orbiting phases. Spacecraft (S/C) CORONAS-F kept its working state right up to the end of the flight - down to the atmosphere entry. This fact enabled to realization of the additional research experiments, concerning with an estimation of the atmospheric density within the low earth orbits (LEO) of the artificial satellites, and made possible to continue track the S/C during final phase of its flight by means of Russian regular command & tracking system, used for it control. Thus there appeared a unique possibility of using for tracking S/C at its de-orbiting phase not only passive radar facilities, belonging to the space surveillance systems and traditionally used for support of the IADC re-entry test campaigns, but also more precise active trajectory radio-tracking facilities from the ground control complex (GCC) applied for this object. Under the corresponding decision of the Russian side such capability of additional high-precise tracking control of the CORONAS-F flight in this period of time has been implemented. The organizing of the CORONAS-F ballistic and navigational support (BNS) and solving its main tasks (such as S/C orbit determination (OD) and its motion prediction and connected with them) both for regular mission stage and for additional flight program were realized by the group of specialists from the Mission Control Center (MCC). MCC was also assigned as a principal organization from the Russian side for participation in the 7th IADC re-entry test campaign on CORONAS-F. The CORONAS-F flight features and space environments circumstances during its flight as well as a methodology and technology of spacecraft ballistic and navigational support are given below. The BNS results for different phases of S/C flight, including the results of its re-entry predictions, obtained during the realization of the 7th IADC test campaign are submitted. The accuracy of space vehicle re-entry prediction and its dependence on various factors are analyzed in more details.

Ivanov, N. M.↗

NASA NTRS2015

Flexible Electrostatic Technology for Capture and Handling Project

To NASA unfunded & planned missions: This new capability to sense proximity, flexibly align to, and attractively grip and capture practically any object in space without any pre-designed physical features or added sensors or actuators will enable or enhance many of MSFC's strategic emphasis areas in space transportation, and space systems such as: 1. A Flexible Electrostatic gripper can enable the capture, gripping and releasing of an extraterrestrial sample of different minerals or a sample canister (metallic or composite) without requiring a handle or grapple fixture.(B) 2. Flexible self-aligning in-space capture/soft docking or berthing of ISS resupply vehicles, pressurized modules, or nodes for in-space assembly and shielding, radiator, and solar Array deployment for space habitats (C) 3. The flexible electrostatic gripper when combined with a simple steerable extendible boom can grip, position, and release objects of various shapes and materials with low mass and power without any prior handles or physical accommodations or surface contamination for ISS experiment experiments and in-situ repair.(F)(G) 4. The Dexterous Docking concept previously proposed to allow simple commercial resupply ships to station-keep and capture either ISS or an Exploration vehicle for supply or fluid transfer lacked a self-sensing, compliant, soft capture gripper like FETCH that could retract and attach to a CBM. (I) 5. To enable a soft capture and de-orbit of a piece of orbital debris will require self-aligning gripping and holding an object wherever possible (thermal coverings or shields of various materials, radiators, solar arrays, antenna dishes) with little or no residual power while adding either drag or active low level thrust.(K) 6. With the scalability of the FETCH technology, small satellites can be captured and handled or can incorporate FETCH gripper to dock to and handle other small vehicles and larger objects for de-orbiting or mitigating Orbital debris (L) 7. Many of previous MSFC and NASA proposals or concepts can now be realized or simplified by the development of the this initial and future FETCH grippers including commercial resupply, Exploration vehicle assembly, Satellite servicing, and orbital debris removal since a major part of these missions is to align to and capture some handle. Completed Project (2013 - 2014) Flexible Electrostatic Technology for Capture & Handling Project Center Innovation Fund: MSFC CIF Program | Space Technology Mission Directorate (STMD) For more information visit techport.nasa.gov Some NASA technology projects are smaller (for example SBIR/STTR, NIAC and Center Innovation Fund), and will have less content than other, larger projects. Newly created projects may not sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 pounds per square inch or 70-300 lb./sq. ft. of surface contact, the FETCH can turn-on and turn-off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, and precision relocation for accurate anchor adhesion.

Keys, Andrew↗

NASA NTRS1991

Momentum harvesting techniques for solar system travel

Astronomers are lately estimating there are 400,000 earth visiting asteroids larger than 100 meters in diameter. These asteroids are uniquely accessible sources of building materials, propellants, oxygen, water, and minerals. They also constitute a huge momentum reserve, potentially usable for travel throughout the solar system. To use this momentum, these stealthy objects must be tracked and the ability to extract the desired momentum obtained. Momentum harvesting by momentum transfer from asteroid to spacecraft, and by using the momentum of the extraterrestrial material to help deliver itself to its destination is discussed. The purpose is neither to quantify nor justify the momentum exchange processes, but to stimulate collective imaginations with some intriguing possibilities which emerge when momentum as well as material is considered. A net and tether concept is the suggested means of asteroid capture, the basic momentum exchange process. The energy damping characteristics of the tether determines the velocity mismatch that can be tolerated, and hence the amount of momentum that can be harvested per capture. As the tether plays out of its reel, drag on the tether steadily accelerates the spacecraft and dilutes, in time, the would-be collision. A variety of concepts for riding and using asteroids after capture are introduced. The hitchhiker uses momentum transfer only. The beachcomber, the caveman, the swinger, the prospector, and the rock wrecker also take advantage of raw asteroid materials. The chemist and the hijacker go further, they process the asteroid into propellants. Or, an asteroid railway system could be constructed with each hijacked asteroid becoming a scheduled train. Travelers could board this space railway system assured that water, oxygen propellants, and shielding await them. Austere space travel could give way to comforts, with a speed and economy impossible without nature's gift of earth visiting asteroids.

Willoughby, Alan J.↗

NASA NTRS2013

Impact of Surface Roughness and Soil Texture on Mineral Dust Emission Fluxes Modeling

Dust production models (DPM) used to estimate vertical fluxes of mineral dust aerosols over arid regions need accurate data on soil and surface properties. The Laboratoire Inter-Universitaire des Systemes Atmospheriques (LISA) data set was developed for Northern Africa, the Middle East, and East Asia. This regional data set was built through dedicated field campaigns and include, among others, the aerodynamic roughness length, the smooth roughness length of the erodible fraction of the surface, and the dry (undisturbed) soil size distribution. Recently, satellite-derived roughness length and high-resolution soil texture data sets at the global scale have emerged and provide the opportunity for the use of advanced schemes in global models. This paper analyzes the behavior of the ERS satellite-derived global roughness length and the State Soil Geographic data base-Food and Agriculture Organization of the United Nations (STATSGO-FAO) soil texture data set (based on wet techniques) using an advanced DPM in comparison to the LISA data set over Northern Africa and the Middle East. We explore the sensitivity of the drag partition scheme (a critical component of the DPM) and of the dust vertical fluxes (intensity and spatial patterns) to the roughness length and soil texture data sets. We also compare the use of the drag partition scheme to a widely used preferential source approach in global models. Idealized experiments with prescribed wind speeds show that the ERS and STATSGO-FAO data sets provide realistic spatial patterns of dust emission and friction velocity thresholds in the region. Finally, we evaluate a dust transport model for the period of March to July 2011 with observed aerosol optical depths from Aerosol Robotic Network sites. Results show that ERS and STATSGO-FAO provide realistic simulations in the region.

textures↗

NASA NTRS1947

Preliminary Evaluation of the Spin and Recovery Characteristics of the Douglas XF3D-1 Airplane

A preliminary evaluation of the spin and recovery characteristics of the XF3D-1 airplane has been made, based primarily on the results of the free-spinning tunnel tests of a model which closely simulated the XF3D-1 in tail design, tail length, and mass loading. Estimates have been made of the rudder-pedal force that may be encountered in effecting recovery from a spin and of the spin recovery parachute requirements of the airplane for demonstration spins. The method of bail-out which should be used if it becomes necessary for the crew to abandon the airplane during a spin is indicated. It was indicated that the recovery characteristics of the XF3D-1 airplane in the clean condition for erect and inverted spins would be satisfactory for all loadings specified by the contractor as possible on the airplane. However, if a spin is inadvertently entered while the landing flaps are down, recovery may be slow. The slow-down brakes and the landing flaps should be retracted immediately upon the inception of a spinning condition, after which recovery from the spin should be attempted. The pedal force necessary to reverse the rudder during a spin will be within the physical capabilities of the pilot. Opening a 10-foot diameter parachute attached to the tail (laid-out-flat diameter, drag coefficient 0.7) or a 4.5-foot diameter parachute attached to the outboard wing tip will insure satisfactory spin recovery from demonstration spins. If it becomes necessary for the crew to abandon the airplane during a spin, they should leave from the outboard side of the cockpit.

Scher, Stanley H.↗

NASA NTRS1959

Some Basic Aspects of Magnetohydrodynamic Boundary-Layer Flows

An appraisal is made of existing solutions of magnetohydrodynamic boundary-layer equations for stagnation flow and flat-plate flow, and some new solutions are given. Since an exact solution of the equations of magnetohydrodynamics requires complicated simultaneous treatment of the equations of fluid flow and of electromagnetism, certain simplifying assumptions are generally introduced. The full implications of these assumptions have not been brought out properly in several recent papers. It is shown in the present report that for the particular law of deformation which the magnetic lines are assumed to follow in these papers a magnet situated inside the missile nose would not be able to take up any drag forces; to do so it would have to be placed in the flow away from the nose. It is also shown that for the assumption that potential flow is maintained outside the boundary layer, the deformation of the magnetic lines is restricted to small values. The literature contains serious disagreements with regard to reductions in heat-transfer rates due to magnetic action at the nose of a missile, and these disagreements are shown to be mainly due to different interpretations of reentry conditions rather than more complicated effects. In the present paper the magnetohydrodynamic boundary-layer equation is also expressed in a simple form that is especially convenient for physical interpretation. This is done by adapting methods to magnetic forces which in the past have been used for forces due to gravitational or centrifugal action. The simplified approach is used to develop some new solutions of boundary-layer flow and to reinterpret certain solutions existing in the literature. An asymptotic boundary-layer solution representing a fixed velocity profile and shear is found. Special emphasis is put on estimating skin friction and heat-transfer rates.

Hess, Robert V.↗

NASA NTRS2019

Comparing Flood-Producing Catastrophic Hurricanes in GEOS: A Study of Juan 1985 and Harvey 2017

Hurricanes Juan (1985) and Harvey (2017) bear remarkable similarities because of the exceptional amount of accumulated precipitation over coastal regions in the Gulf, consequent to the peculiar and rare situation in which a hurricane stalls for several days on a coastal area, displaying minimal progress. This is particularly dangerous because: a) terrestrial drag affect only part of the circulation so that weakening is not as fast as when there is rapid motion inland; b) a part of the circulation remains over water and as such low-level moisture flux convergence is maintained; c) precipitation lasts for a very long time over the same area; d) moisture recycling from flooded areas further contributes to maintaining flood conditions. From the forecast perspective, hurricanes with track singularities such as stalling points, loops, or multiple landfalls over the same region are exceptionally difficult to predict because they result from small variations of opposing mechanisms and are therefore intrinsically unstable. Intensity fluctuations and track singularities are strongly coupled. The representation of fluxes undergoing differential drag (ocean vs. land) inside the same circulation is critically dependent upon resolution. Recent modeling development efforts within the NASA Global Modeling and Assimilation Office (GMAO) have brought the horizontal resolution of the global cubed-sphere Goddard Earth Observing System (GEOS) atmospheric model down to 12 km. This has led to innovative findings in the field of tropical cyclone (TC) modeling within a global framework. The GEOS atmospheric model and data assimilation system (DAS), used to produce the MERRA-2 (Modern Era Retrospective analysis for Research and Applications) reanalysis, has a "Replay" capability that adds a forcing term to the model equations to constrain it to follow a specified trajectory. This capability is used to produce global, downscaled versions of the 50 km MERRA-2 reanalysis at a 12.5 km resolution. The full DAS and replay modes both use the Incremental Analysis Update or IAU for applying an analysis increment to the model's background state four times each day at 00Z, 06Z, 12Z and 18Z. In a full DAS mode, a six-hour free run of the model is made (Predictor Step), writing states that will be used as backgrounds or first-guesses for the analysis centered on 00Z. The Analysis system then produces its best estimate of the 00Z state by blending backgrounds with observations. The difference between this best estimate and the model's original first guess at 00Z is treated as an analysis increment and added uniformly as a forcing term to the model during a second, now forced, run of the 12Z to 03Z window, which produces the assimilated results. Replay mode is very similar, except only the 00Z background is needed from the predictor segment, which is thus half as long, and instead of doing an analysis, a previously analyzed state at 00Z is read in. The increment is then computed and applied to the corrector step in the same way as in the original DAS. When downscaling horizontal spatial filters can be applied to the "analysis" increment used to force the Corrector step, so as to reproduce the full meteorological state or selectively choose or discard certain forcings. In this presentation, full global hindcast simulations of Juan and operational forecasts of Harvey are compared.

Flooding↗

NASA NTRS2000

Review of Skin Friction Measurements Including Recent High-Reynolds Number Results from NASA Langley NTF

This paper reviews flat plate skin friction data from early correlations of drag on plates in water to measurements in the cryogenic environment of The NASA Langley National Transonic Facility (NTF) in late 1996. The flat plate (zero pressure gradient with negligible surface curvature) incompressible skin friction at high Reynolds numbers is emphasized in this paper, due to its importance in assessing the accuracy of measurements, and as being important to the aerodynamics of large scale vehicles. A correlation of zero pressure gradient skin friction data minimizing extraneous effects between tests is often used as the first step in the calculation of skin friction in complex flows. Early data compiled by Schoenherr for a range of momentum thickness Reynolds numbers, R(sub Theta) from 860 to 370,000 contained large scatter, but has proved surprisingly accurate in its correlated form. Subsequent measurements in wind tunnels under more carefully controlled conditions have provided inputs to this database, usually to a maximum R(sub Theta) of about 40,000. Data on a large axisymmetric model in the NASA Langley National Transonic Facility extends the upper limit in incompressible R(sub Theta) to 619,800 using the van Driest transformation. Previous data, test techniques, and error sources ar discussed, and the NTF data will be discussed in detail. The NTF Preston tube and Clauser inferred data accuracy is estimated to be within -2 percent of a power-law curve fit, and falls above the Spalding theory by 1 percent at R(sub Theta) of about 600,000.

Watson, Ralph D.↗

DOE OSTI2022

Mooring System Cost Estimates for Wave Energy Farms in Shared Mooring Arrays

As wave energy converters (WECs) become more advanced and cost-efficient, so too must their mooring systems. A key question in the development plans for WECs is the cost of the mooring system, particularly for large wave farms. WEC devices deployed in a WEC farm array, where each device can be connected by shared mooring lines in various array layouts, have potential to reduce mooring system costs significantly. This paper presents the modeling and designing of mooring systems for large WEC arrays and the calculation of the cost of each mooring system to determine the change in cost as the number of WECs in a farm increases. A baseline mooring system for a single floating oscillating water column (OWC) WEC was developed for this analysis. The mooring system utilizes four anchored mooring lines connected to a square assembly of wire rope mooring lines, supported by four floating buoys, and attached to the floating WEC by four polyester rope mooring lines. This assembly, referred to as a floating cell, can be tiled to form various rectangular WEC arrays. The objective of this analysis is to determine how the mooring system cost changes as more WECs are added to an array layout, each with their own interconnected floating cell. To do this, complete mooring systems need to be designed for each WEC array layout. To narrow down the design space of a WEC array mooring system, a couple assumptions were made. It was assumed that the floating cell parameters of the baseline design were to stay constant across all floating cells in the WEC array. It was also assumed that the anchored mooring lines would be of the baseline configuration, a predominantly chain mooring line with a short section of polyester rope near the fairlead, and a drag-embedment anchor. These anchored lines were assumed to extend from the outer edges of the WEC array, inline with the headings of the wire rope mooring lines of the floating cells, or diagonal if extending from a corner of the WEC array. Full mooring systems were designed for 2xN and NxN WEC array layouts and efficiently simulated in the mooring dynamics simulation tool, MoorDyn, to ensure all dynamic constraints were met. The system costs were calculated and then refined by shortening unnecessary chain line lengths and reducing the chain diameters of the downstream anchored mooring lines. It was found that, in general, mooring system costs per WEC decrease when WECs are installed in an array. Compared to the baseline mooring system for a single WEC, the 2x3 mooring system array had the lowest mooring system cost per WEC, reducing the cost per WEC by 59%. The 3x3 and 4x4 array mooring systems also saw significant reductions in cost per WEC but had negligible cost savings between the two designs, primarily because the larger 4x4 mooring system requires larger chain diameters, which increases cost. These results provide an interesting glimpse into modeling, designing, and calculating the cost of mooring systems for large WEC arrays.

cost↗

NASA NTRS1997

Wave Driven Exothermic Heating in the Mesopause Region

A full-wave propagation model was developed that describes the propagation of gravity waves from the Earth's surface to the upper boundary, which can be placed anywhere between 150 and 500 km altitude. The model includes a realistic background atmosphere, and includes the effects of mean horizontal winds and their vertical shears, mean vertical temperature gradients, the eddy and molecular diffusion of heat and momentum, and the effects of ion-drag. This model solves five coupled second-order differential equations (continuity, momentum, and energy) in the vertical coordinate to derive the perturbation variables u', v', w' (horizontal and vertical velocity components), T' (temperature) and p' (pressure). The upper boundary can be automatically selected based on tests using the radiation condition at the upper boundary, wherein the height is increased until the wave is experiencing severe dissipation at the upper boundary, ensuring that substantial absorption occurs for any waves reflected from the upper boundary. The determination of wave amplitude is a key requirement of wave energetics. Therefore, the fullwave model has been applied to airglow observations in order to determine wave amplitudes as a function of altitude. This was accomplished by using the full-wave model output to drive a chemistry perturbation module that describes minor species perturbations and the resulting airglow perturbations. The full-wave output was multiplied by an altitude-independent factor such that the modeled and observed relative airglow intensity perturbations were equal. The effects of mean winds were included in these studies, and found to be the most important model input affecting the calculations (being more important than the choice of eddy diffusion profiles and chemical kinetic coefficients). In one study (Hickey et al., 1997a) these winds could not be well estimated from the measurements, whereas in the second study (Hickey et al.,1997b) the mean were well defined with a sodium wind-temperature lidar.

Hickey, Michael P.↗

DOE OSTI2023

A high‐order discontinuous Galerkin approach for physics‐based thermospheric modeling

Abstract The accurate prediction of aerodynamic drag on satellites orbiting in the upper atmosphere is critical to the operational success of modern space technologies, such as satellite‐based communication or navigation systems, which have become increasingly popular in the last few years due to the deployment of constellations of satellites in low‐Earth orbit. As a result, physics‐based models of the ionosphere and thermosphere have emerged as a necessary tool for the prediction of atmospheric outputs under highly variable space weather conditions. This paper proposes a high‐fidelity approach for physics‐based space weather modeling based on the solution of the Navier–Stokes equations using a high‐order discontinuous Galerkin method, combined with a matrix‐free strategy suitable for high‐performance computing on GPU architectures. The approach consists of a thermospheric model that describes a chemically frozen neutral atmosphere in nonhydrostatic equilibrium driven by the external excitation of the Sun. A novel set of variables is considered to treat the low densities present in the upper atmosphere and to accommodate the wide range of scales present in the problem. At the same time, and unlike most existing approaches, radial and angular directions are treated in a nonsegregated approach. The study presents a set of numerical examples that demonstrate the accuracy of the approximation and validate the current approach against observational data along a satellite orbit, including estimates of established empirical and physics‐based models of the ionosphere‐thermosphere system. Finally, a one‐dimensional radial derivation of the physics‐based model is presented and utilized for conducting a parametric study of the main thermal quantities under various solar conditions.

Engineering↗

NASA NTRSDate not supplied

Post-Flight Quantification of LOFTID Aeroshell Deflection Using Feature Tracking

The Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) was a flight demonstration of the Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology, which has the potential to enable delivery of heavy payloads to Mars, Venus, and Titan, as well as return to Earth. Unlike rigid aeroshells that are constrained by the diameter of the launch vehicle shroud, inflatable aeroshells can be deployed to a much larger drag area, thus allowing a more massive spacecraft to begin its deceleration at higher altitudes and experience less heating. On November 10, 2022, the LOFTID reentry vehicle launched aboard a United Launch Alliance Atlas V rocket to low-Earth orbit. The aeroshell was inflated to its full 6-meter diameter, and the vehicle then successfully re-entered the atmosphere, landing in the Pacific Ocean. The aeroshell was composed of seven tori bound together by high strength straps to create a 70-degree half-angle sphere-cone, and the forebody was covered with a flexible thermal protection system (FTPS) (Fig. 1). The centerbody of the vehicle housed six visual cameras. Each camera was made up of 1920 x 1080 pixels and had a field-of-view (FOV) of 85.4° x 55.6°, resulting in a resolution of less than 0.1" at all locations on the aftbody side of the aeroshell. The approximate locations of the cameras and their associated FOVs is shown in Fig. 2. The high loads experienced during flight resulted in the cone of the aeroshell deflecting. This behavior was seen during the static load testing of the aeroshell in May 2021, in which loads ranging from 1,000 to 20,000 lbf were applied, and deflections of up to ~1.7° were observed. The LOFTID team was interested in estimating the deflection of the aeroshell during the its entry into Earth's atmosphere. Before launch, 1"-diameter black circles were drawn on select structural straps for tracking with the visual cameras; the change in position of these features could then be used to calculate aeroshell deflection angle.

Hannah S. Alpert↗

NASA NTRSDate not supplied

Post-Flight Quantification of LOFTID Aeroshell Deflection Using Feature Tracking

Hannah S. Alpert↗

DOE OSTI2023

Multifidelity Approach to Sensitivity Estimation in Large-Eddy Simulation

A novel approach to compute affordable approximate sensitivities in a large-eddy simulation (LES) is proposed and assessed. The approach is based on solving a Reynolds-averaged Navier–Stokes (RANS) problem that has been linearized around the mean LES solution, with closure modeling required for the linearized changes in turbulent Reynolds stresses. In the present study, the closure modeling is based on a linearized algebraic turbulence model. The method is assessed for the flow over a NACA0012 airfoil at a fixed angle of attack, with the Reynolds number as the variable parameter. The results show that, provided an accurate linearized closure model, the method predicts the correct sensitivity of the skin friction coefficient and the mean velocity field at the cost of a linearized RANS, which provides an important proof-of-concept for this approach. Here, the linearized algebraic turbulence model with standard model coefficients produces a reasonably accurate sensitivity, but the results also suggest that accuracy could be gained from recalibrating the model coefficients for this new use of the model.

42 ENGINEERING↗

NASA NTRS1981

Full-scale study of the cooling system aerodynamics of an operating piston engine installed in a light aircraft wing panel

Measurements of the drag and of the nacelle internal pressures on a wing and nacelle that housed a horizontally opposed piston engine were made in the 40- by 80-Foot Wind Tunnel at Ames Research Center. These tests are follow-ons to earlier tests made with the same wing and nacelle but in which the engine was replaced with an electric motor and an adjustable orifice plate. In the initial tests the orifice plate was used to control the rate of cooling-air flow through the nacelle and thereby to simulate a range of gasoline engine types. Good agreement was found between the results of those tests and of the test reported here. Also, the upper and lower plenum pressure and cooling-air flow rate were found to be related by conventional equations used to represent the flow through orifices. Tests were run with three cooling air inlet sizes over a free-stream velocity range from 50 to 150 knots, an angle of attack range from 0 deg to 10 deg, and a cowl-flap deflection range from 0 deg to 30 deg. The data were analyzed by computing a flow coefficient similar to that used in the analysis of orifices. It was found that all of the flow coefficient values fell within a band that varied linearly with inlet area. The linear mean line through this band provides an estimate of the relationship between cooling-air flow rate and upper plenum pressure over a wide range of test conditions.

Corsiglia, V. R.↗