Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “directivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Direct inference of nuclear equation-of-state parameters from gravitational-wave observations

The observation of neutron star mergers with gravitational waves (GWs) has provided a new method to constrain the dense-matter equation of state (EOS) and to better understand its nuclear physics. However, inferring nuclear microphysics from GW observations necessitates the sampling of EOS model parameters that serve as input for each EOS used during the GW data analysis. The sampling of the EOS parameters requires solving the Tolman–Oppenheimer–Volkoff (TOV) equations a large number of times—a process that slows down each likelihood evaluation in the analysis on the order of a few seconds. Here, we employ emulators for the TOV equations built using multilayer perceptron neural networks to enable direct inference of nuclear EOS parameters from GW strain data. Our emulators allow us to rapidly solve the TOV equations, taking in EOS parameters and outputting the associated tidal deformability of a neutron star in only a few tens of milliseconds. We implement these emulators in PyCBC to directly infer the EOS parameters using the event GW170817, providing posteriors on these parameters informed solely by GWs. We benchmark these runs against analyses performed using the full TOV solver and find that the emulators achieve speed ups of nearly two orders of magnitude, with negligible differences in the recovered posteriors. Additionally, we constrain the slope and curvature of the symmetry energy at the 90% upper credible interval to be $L$ sym ≲ 106 MeV and $K$ sym ≲ 26 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Secondary electron emission for reticulated carbon foam surfaces using direct measurements and spectroscopic analysis

This study investigates secondary electron emission (SEE) characteristics of reticulated foams using direct measurements and analytical modeling. Total SEE was quantified, revealing suppression of up to 44% in carbon foam structures compared to planar graphite surfaces. An optimal geometric configuration was identified and supported by analytical models. SEE angular dependence experiments showed diverse behaviors: fiber-like behavior and directional dependence for pore and ligaments on the mm scale, with fuzz-like characteristics when the foam features are between 10–100 µm. Electron energy analyzer measurements showed that carbon foams preferentially suppress inelastic backscattered electrons (BSEs) more so than true secondary electrons (SEs). The analysis indicated a larger fraction of low-energy SE generation in foams compared to flat surfaces due to increased emission from curved fiber ligaments and tertiary SEs from high-energy BSEs. These findings have implications for design and optimization of materials with tailored electron emission properties for applications like plasma-facing components, spacecraft materials, and accelerator surfaces.

Auger↗

The status and future of direct nuclear reaction measurements for stellar burning

The study of stellar burning began just over 100 years ago. Nonetheless, we do not yet have a detailed picture of the nucleosynthesis within stars and how nucleosynthesis impacts stellar structure and the remnants of stellar evolution. Achieving this understanding will require precise direct measurements of the nuclear reactions involved. Furthermore, this report summarizes the status of direct measurements for stellar burning, focusing on developments of the last couple of decades, and offering a prospectus of near-future developments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Directed motion of liquid crystal skyrmions with oscillating fields

Abstract Using continuum simulations, we show that under a sinusoidal electric field, liquid crystal skyrmions undergo periodic shape oscillations which produce controlled directed motion. The speed of the skyrmion is non-monotonic in the frequency of the applied field, and exhibits multiple reversals of the motion as a function of changing frequency. We map out the dynamical regime diagram of the forward and reverse motion for two superimposed ac driving frequencies, and show that the reversals and directed motion can occur even when only a single ac driving frequency is present. Using pulsed ac driving, we demonstrate that the motion arises due to an asymmetry in the relaxation times of the skyrmion shape. We discuss the connection between our results and ratchet effects observed in systems without asymmetric substrates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Search for magnetically-induced signatures in the arrival directions of ultra-high-energy cosmic rays measured at the Pierre Auger Observatory

We search for signals of magnetically-induced effects in the arrival directions of ultra-high-energy cosmic rays detected at the Pierre Auger Observatory. We apply two different methods. One is a search for sets of events that show a correlation between their arrival direction and the inverse of their energy, which would be expected if they come from the same point-like source, they have the same electric charge and their deflection is relatively small and coherent. We refer to these sets of events as “multiplets”. The second method, called “thrust”, is a principal axis analysis aimed to detect the elongated patterns in a region of interest. We study the sensitivity of both methods using a benchmark simulation and we apply them to data in two different searches. The first search is done assuming as source candidates a list of nearby active galactic nuclei and starburst galaxies. The second is an all-sky blind search. We report the results and we find no statistically significant features. We discuss the compatibility of these results with the indications on the mass composition inferred from data of the Pierre Auger Observatory.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved sensitivity of the DRIFT-IId directional dark matter experiment using machine learning

We demonstrate a new type of analysis for the DRIFT-IId directional dark matter detector using a machine learning algorithm called a Random Forest Classifier. The analysis labels events as signal or background based on a series of selection parameters, rather than solely applying hard cuts. The analysis efficiency is shown to be comparable to our previous result at high energy but with increased efficiency at lower energies. This leads to a projected sensitivity enhancement of one order of magnitude below a WIMP mass of 15 GeV c -2 and a projected sensitivity limit that reaches down to a WIMP mass of 9 GeV c -2 , which is a first for a directionally sensitive dark matter detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Halo-independent analysis of direct dark matter detection through electron scattering

Sub-GeV mass dark matter particles whose collisions with nuclei would not deposit sufficient energy to be detected, could instead be revealed through their interaction with electrons. Analyses of data from direct detection experiments usually require assuming a local dark matter halo velocity distribution. In the halo-independent analysis method, properties of this distribution are instead inferred from direct dark matter detection data, which allows then to compare different data without making any assumption on the uncertain local dark halo characteristics. Furthermore, this method has so far been developed for and applied to dark matter scattering off nuclei. Here we demonstrate how this analysis can be applied to scattering off electrons.

79 ASTRONOMY AND ASTROPHYSICS↗

Neural simulation-based inference of the neutron star equation of state directly from telescope spectra

Neutron stars provide a unique opportunity to study strongly interacting matter under extreme density conditions. The intricacies of matter inside neutron stars and their equation of state are not directly visible, but determine bulk properties, such as mass and radius, which affect the star's thermal X-ray emissions. However, the telescope spectra of these emissions are also affected by the stellar distance, hydrogen column, and effective surface temperature, which are not always well-constrained. Uncertainties on these nuisance parameters must be accounted for when making a robust estimation of the equation of state. In this study, we develop a novel methodology that, for the first time, can infer the full posterior distribution of both the equation of state and nuisance parameters directly from telescope observations. This method relies on the use of neural likelihood estimation, in which normalizing flows use samples of simulated telescope data to learn the likelihood of the neutron star spectra as a function of these parameters, coupled with Hamiltonian Monte Carlo methods to efficiently sample from the corresponding posterior distribution. Our approach surpasses the accuracy of previous methods, improves the interpretability of the results by providing access to the full posterior distribution, and naturally scales to a growing number of neutron star observations expected in the coming years.

79 ASTRONOMY AND ASTROPHYSICS↗

Construction of quasisymmetric stellarators using a direct coordinate approach

In this work, optimized stellarator configurations and their analytical properties are obtained using a near-axis expansion approach. Such configurations are associated with good confinement as the guiding center particle trajectories and neoclassical transport are isomorphic to those in a tokamak. This makes them appealing as fusion reactor candidates. Using a direct coordinate approach, where the magnetic field and flux surface functions are found explicitly in terms of the position vector at successive orders in the distance to the axis, the set of ordinary differential equations for first and second order quasisymmetry is derived. Examples of quasi-axisymmetric shapes are constructed using a pseudospectral numerical method. Finally, the direct coordinate approach is used to independently verify two hypotheses commonly associated with quasisymmetric magnetic fields, namely that the number of equations exceeds the number of parameters at third order in the expansion and that the near-axis expansion does not prohibit exact quasisymmetry from being achieved on a single flux surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetized directly-driven ICF capsules: increased instability growth from non-uniform laser drive

Simulations anticipate increased perturbation growth from non-uniform laser heating for magnetized direct-drive implosions. At the capsule pole, where the magnetic field is normal to the ablator surface, the field remains in the conduction zone and suppresses non-radial thermal conduction; in unmagnetized implosions this non-radial heat-flow is crucial in mitigating laser heating imbalances. Single-mode simulations show the magnetic field particularly amplifying short wavelength perturbations, whose behavior is dominated by thermal conduction. The most unstable wavelength can also become shorter. 3D multi-mode simulations of the capsule pole reinforce these findings, with increased perturbation growth anticipated across a wide range of scales. Finally, the results indicate that high-gain spherical direct-drive implosions require greater constraints on the laser heating uniformity when magnetized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct preemptive stabilization of $m,n$ = 2,1 neoclassical tearing modes by electron cyclotron current drive in the DIII-D low-torque ITER baseline scenario

We report the first preemptive direct stabilization of $m,n$ = 2,1 neoclassical tearing modes (NTMs) in DIII-D low-torque ITER baseline scenario plasmas by electron cyclotron waves. These experiments strongly support that the observed stabilization is achieved by replacing the missing bootstrap current in the island by electron cyclotron current drive (ECCD). These plasmas (with and without ECCD) are stable to 2,1 NTMs when the differential rotation between the q = 1 and q = 2 surfaces (Δf 1,2 ) is sustained above a critical value (Δf CRIT ≈ 1 kHz), but those evolving to low differential rotation (Δf 1,2 < Δf CRIT ) routinely develop a disruptive 2,1 island at the time and frequency of a sawtooth precursor. Preemptive, local and direct stabilization by ECCD is tested by scanning the current drive amplitude and location inside and outside of the q = 2 rational surface shot by shot. Analysis of only low differential rotation time windows, i.e. when stabilization from Δf 1,2 is absent, shows focused ECCD at q = 2 prevents the onset of 2,1 NTMs. These results are important, as they give the first demonstration of disruptive NTM control by ECCD in the plasma scenario planned for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extraction of ion beam from laser ion source for direct plasma injection scheme

Laser ion sources are expected to be used in various applications of heavy ion beam technology. The plasma direct injection scheme (DPIS) is a method in which ion beams extracted from a laser ion source are directly injected into a radio frequency quadrupole (RFQ) linear accelerator. In this study, a new shape of the plasma electrode with a concave surface for the DPIS was proposed to inject a converging beam to a cavity of RFQ accelerator. This approach allows the use of a large-diameter extraction electrode, which is not limited by the aperture of the RFQ electrode rods. The DPIS, using the concave surface electrode, was employed to accelerate C 6+ ion beams. The results indicated that both the beam current and the number of ions increased nearly twice with the proposed electrode shape compared to values obtained with the conventional electrode. This enhancement corresponded to the increased extraction area of the beam.

43 PARTICLE ACCELERATORS↗

High spatial resolution direct conversion amorphous selenium X-ray detectors with monolithically integrated CMOS readout

Recent progress in the field of micron-scale spatial resolution direct conversion X-ray detectors for high-energy synchrotron light sources serve applications ranging from nondestructive and noninvasive microscopy techniques which provide insight into the structure and morphology of crystals, to medical diagnostic measurement devices. Amorphous selenium ( a -Se) as a wide-bandgap thermally evaporated photoconductor exhibits ultra-low thermal generation rates for dark carriers and has been extensively used in X-ray medical imaging. Being an amorphous material, it can further be deposited over large areas at room temperatures and at substantially lower costs as compared to crystalline semiconductors. Here, to address the demands for a high-energy and high spatial resolution X-ray detector for synchrotron light source applications, we have thermally evaporated a -Se on a Mixed-Mode Pixel Array Detector (MM-PAD) Application Specific Integrated Circuit (ASIC). The ASIC format consists of 128 × 128 square pixels each 150 μm on a side. A 200 μm a -Se layer was directly deposited on the ASIC followed by a metal top electrode. The completed detector assembly was tested with 45 kV Ag and 23 kV Cu X-ray tube sources. The detector fabrication, performances, Modulation Transfer Function (MTF) measurements, and simulations are reported.

36 MATERIALS SCIENCE↗

Epitaxial growth of monolayer PdTe 2 and patterned PtTe 2 by direct tellurization of Pd and Pt surfaces

Two-dimensional (2D) palladium ditelluride (PdTe 2 ) and platinum ditelluride (PtTe 2 ) are two Dirac semimetals, which have fascinating quantum properties such as superconductivity, magnetism and topological order and show the promising applications in future nanoelectronics and optoelectronics. However, the synthesis of PdTe 2 and PtTe 2 monolayers (MLs) is hindered by a strong interlayer coupling and orbital hybridization. Here, in this study, we demonstrate an efficient synthesis of PdTe 2 and PtTe 2 MLs Large-area and high quality MLs of PdTe 2 and patterned PtTe 2 were epitaxially grown on the Pd(111) and Pt(111) surfaces by direct telurization in ultra-high vacuum. This was confirmed by x-ray photoelectron spectroscopy, low energy electron diffraction and scanning tunnelling microscopy. PdTe 2 ML demonstrated high thermal stability showing no decomposition sign after annealing at 470 °C. A well-ordered (2 × 2) PtTe 2 structure with Kagome lattice was observed on Te/Pt(111) surface following annealing at 200 °C in UHV, where the (2 × 2) pattern was formed by Te atom vacancies. PtTe 2 multilayer film was prepared as well, and it demonstrated the excitation of the Dirac plasmons as measured by high-resolution electron energy loss spectroscopy. The direct tellurization offers the simple and reliable protocol for the preparation of the ML of PdTe 2 and patterned PtTe 2 , and this opens new opportunities for quantum phenomena research and for practical optoelectronics applications.

2D materials↗

Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors

Here, with recent advances of additive manufacturing technology, direct ink write (DIW) printing has allowed to incorporate multi-material printing of various materials with freedom of design and complex geometric shapes to complete functional sensors in a one-step fabrication. This paper introduces the use of DIW 3D printing of polydimethylsiloxane (PDMS) with barium titanate (BTO) filler as stretchable composites with tunable piezoelectric properties that can be used for force sensors applications. To improve the bonding between stretchable piezoelectric composites and electrodes, multi-walled carbon nanotubes was included in the fabrication of electrodes at a fixed ratio of 11 wt. %. The alignment of the BTO dipoles was achieved through corona poling method, which applies an electric charge on the surface layer of the functional material, aligning the dipoles in the desired direction and thus gaining the piezoelectricity. Different BTO mixing ratios (10–50 wt. %) were evaluated in order to obtain tunable piezoelectric properties and compare the sensitivity with respect their elastic properties. Tensile testing and piezoelectric testing were carried out to characterize mechanical and piezoelectric properties. Results showed that fabricated PDMS with 50 wt. % BTO gave the highest piezoelectric coefficient (d 33 ) of 11.5 pC N -1 and with an output voltage of 385 mV under compression loading of >200 lbF. This demonstrates feasibility of using multi-material DIW printing to fabricate piezoelectric force sensors with integrated electrodes in one-step without compromising the flexibility of the material.

36 MATERIALS SCIENCE↗

Direct prediction of inelastic neutron scattering spectra from the crystal structure*

Abstract Inelastic neutron scattering (INS) is a powerful technique to study vibrational dynamics of materials with several unique advantages. However, analysis and interpretation of INS spectra often require advanced modeling that needs specialized computing resources and relevant expertise. This difficulty is compounded by the limited experimental resources available to perform INS measurements. In this work, we develop a machine-learning based predictive framework which is capable of directly predicting both one-dimensional INS spectra and two-dimensional INS spectra with additional momentum resolution. By integrating symmetry-aware neural networks with autoencoders, and using a large scale synthetic INS database, high-dimensional spectral data are compressed into a latent-space representation, and a high-quality spectra prediction is achieved by using only atomic coordinates as input. Our work offers an efficient approach to predict complex multi-dimensional neutron spectra directly from simple input; it allows for improved efficiency in using the limited INS measurement resources, and sheds light on building structure-property relationships in a variety of on-the-fly experimental data analysis scenarios.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Direct fabrication and characterization of vertically stacked Graphene/h-BN/Graphene tunnel junctions

We have used a lithography free technique for the direct fabrication of vertically stacked two-dimensional (2D) material-based tunnel junctions and characterized by Raman, AFM, XPS. We fabricated Graphene/h-BN/Graphene devices by direct deposition of graphene (bottom layer), h-BN (insulating barrier) and graphene (top layer) sequentially using a plasma enhanced chemical vapor deposition on Si/SiO 2 substrates. The thickness of the h-BN insulating layer was varied by tuning the plasma power and the deposition time. Samples were characterized by Raman, AFM, and XPS. The I-V data follows the barrier thickness dependent quantum tunneling behavior for equally doped graphene layers. The resonant tunneling behavior was observed at room temperature for oppositely doped graphene layers where hydrazine and ammonia were used for n-doping of one of the graphene layers. The resonance with negative differential conductance occurs when the band structures of the two electrodes are aligned. The doping effect of the resonant peak is observed for varying doping levels. The results are explained according to the Bardeen tunneling model.

2D-materials↗

Direct evidence that tumor cells soften when navigating confined spaces.

The mechanical properties of cells strongly regulate many physiological and pathological processes. For example, in cancer, invasive and metastatic tumor cells have often been reported to be softer than nontumor cells, raising speculation that cancer cells might adaptively soften to facilitate migration through narrow tissue spaces. Despite growing interest in targeting cell softening to impede invasion and metastasis, it remains to be directly demonstrated that tumor cells soften as they migrate through confined spaces. Here, we address this open question by combining topographically patterned substrates with atomic force microscopy (AFM). Using a polydimethylsiloxane open-roof microdevice featuring tapered, fibronectin-coated channels, we followed the migration of U2OS cells through various stages of confinement while simultaneously performing AFM indentation. As cells progress from unconfined migration to fully confined migration, cells soften and exclude Yes-associated protein from the nucleus. Superresolution imaging reveals that confinement induces remodeling of actomyosin stress fiber architecture. Companion studies with flat one-dimensional microlines indicate that the changes in cytoarchitecture and mechanics are intrinsically driven by topographical confinement rather than changes in cellular aspect ratio. Our studies represent among the most direct evidence to date that tumor cells soften during confined migration and support cell softening as a mechanoadaptive mechanism during invasion.

59 BASIC BIOLOGICAL SCIENCES↗