Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

X-Ray Production by V1647 Ori During Optical Outbursts

The pre-main-sequence (PMS) star V1647 Ori has recently undergone two optical/near-infrared (OIR) outbursts that are associated with dramatic enhancements in the stellar accretion rate. Our intensive X-ray monitoring of this object affords the opportunity to investigate whether and how the intense X-ray emission is related to PMS accretion activity. Our analysis of all 14 Chandra X-Ray Observatory observations of V1647 Ori demonstrates that variations in the X-ray luminosity of V1647 Ori are correlated with similar changes in the OIR brightness of this source during both (2003-2005 and 2008) eruptions, strongly supporting the hypothesis that accretion is the primary generation mechanism for the X-ray outbursts. Furthermore, the Chandra monitoring demonstrates that the X-ray spectral properties of the second eruption were strikingly similar to those of the 2003 eruption. We find that X-ray spectra obtained immediately following the second outburstduring which V1647 Ori exhibited high X-ray luminosities, high hardness ratios, and strong X-ray variabilityare well modeled as a heavily absorbed (N H 4 1022cm2), single-component plasma with characteristic temperatures (kT X 2-6keV) that are consistently too high to be generated via accretion shocks but are in the range expected for plasma heated by magnetic reconnection events. We also find that the X-ray absorbing column has not changed significantly throughout the observing campaign. Since the OIR and X-ray changes are correlated, we hypothesize that these reconnection events either occur in the accretion stream connecting the circumstellar disk to the star or in accretion-enhanced protostellar coronal activity.

Teets, William↗
DOE OSTI2024

Understanding the deficiency in inertial confinement fusion hohlraum x-ray flux predictions using experiments at the National Ignition Facility

The predicted implosion performance of deuterium-tritium fuel capsules in indirect-drive inertial confinement fusion experiments relies on precise calculations of the x-ray drive in laser-heated cavities (hohlraums). This requires accurate, spectrally dependent simulations of laser to x-ray conversion efficiencies and x-ray absorption losses to the hohlraum wall. A set of National Ignition Facility experiments have identified a cause for the long-standing hohlraum “drive deficit” as the overprediction of gold emission at ~2.5 keV in nonlocal thermodynamic equilibrium coronal plasma regions within the hohlraum. Finally, reducing the emission and absorption opacity in this spectral region by ~20% brings simulations into agreement with measured x-ray fluxes and spectra.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1976

Influence of magnetic field structure on the conduction cooling of flare loops

A simple model facilitates calculation of the influence of magnetic field configuration on the conduction cooling rate of a hot post-flare coronal plasma. The magnetic field is taken to be that produced by a line dipole or point dipole at an arbitrary depth below the chromosphere. For the high temperatures (T greater than or equal to 10 to the 7th power K) produced by flares, the plasma may remain static and isobaric. The influence of the field is such as to increase the heat flux (per unit area) into the chromosphere, but to decrease the total conduction cooling of the flare plasma. This leads to a significant enhancement of the total energy radiated by the flare plasma.

Antiochos, S. K.↗
NASA NTRS1981

Mechanical heating in the transition region

Attention is focused on the energy balance in the transition region and the role that mechanical heating plays in determining the temperature density structure of this region in a stellar atmosphere. Because of its role as the interface layer through which mass and energy flow between the chromospheres and corona, direct deposition of mechanical energy is a relatively unimportant factor in the overall energy balance in the transition region, except in the uppermost layers where the temperature approaches coronal values.

Withbroe, G.↗
NASA NTRS1987

Electron-heated flare models - Alive and well

Recent results of quantitative tests of the thick-target electron-heated model (Brown, 1973) are reviewed. The spatial structure of the hard X-ray emission in the 3.5-30 keV range was examined, and it is shown that initially the emission is dominated by footpoint emission caused by the impact of the electron beam on the dense chromospheric layers of the loop, while later the emission comes primarily from the upper coronal parts of the loop. Another diagnostic examined was the shape of the Ca XIX soft X-ray line spectrum.

Emslie, A. Gordon↗
NASA NTRS1996

Chromospheres of Coronal Stars

We summarize the main results obtained from the analysis of ultraviolet emission line profiles of coronal late-type stars observed with the Goddard High Resolution Spectrograph (GHRS) on the Hubble Space Telescope. The excellent GHRS spectra provide new information on magnetohydrodynamic phenomena in the chromospheres and transition regions of these stars. One exciting new result is the discovery of broad components in the transition region lines of active stars that we believe provide evidence for microflare heating in these stars.

Linsky, Jeffrey L.↗
NASA NTRS1981

The solar ultraviolet source for the ionosphere and its variation

Ion production in the ionospheric E and F regions is primarily due to solar EUV fluxes at wavelengths below 102.7 nm, where the flux ratios of maximum/minium for the present solar cycle were found to range from values around 3 for the dominant chromospheric emissions to much higher values for coronal emissions, resulting in a factor of about 4 in the integrated flux of the range 14-102.7 nm. The vertical distribution of ion production depends not only on the incident solar EUV fluxes but also on the structure of the absorbing neutral atmosphere (thermosphere). As the latter is strongly affected by solar EUV fluxes above 130 nm (production of atomic oxygen and heating), the observed increase, with ratios ranging from about 1.2 around 175-185 nm to about 2.3 around 140 nm, is at least indirectly important in the solar cycle variation of the ionosphere. The EUV variability models of the ionosphere using non EUV indices such as F sub 10.7, R sub Z or Ca2 plage indices are valuable as a crude guide only, but not for quantitative representations.

Hinteregger, H. E.↗
NASA NTRS1992

The structure of the coronal soft X-ray source associated with the dark filament disappearance of 1991 September 28 using the Yohkoh Soft X-ray Telescope

The structure of the coronal soft X-ray source associated with the dark filament disappearance on September 28, 1991, observed with the Soft X-ray Telescope, is examined as a possible example of the 'eruption-reconnection' model of filament disappearance. The results suggest, however, that this model may not fit. There is a strong possibility that much of the dark filament mass remains in the heated unwinding axial field.

Mcallister, Alan↗
DOE OSTI2024

Local models of two-temperature accretion disc coronae – II. Ion thermal conduction and the absence of disc evaporation

We use local stratified shearing-box simulations with magnetic field-aligned thermal conduction to study an idealized model of the coupling between a cold, radiatively efficient accretion disc, and an overlying, hot, two-temperature corona. Evaporation of a cold disc by conduction from the hot corona has been proposed as a means of mediating the soft-to-hard state transitions observed in X-ray binary systems. We model the coronal plasma in our local disc patch as an MHD fluid subject to both free-streaming ion conduction and a parametrized cooling function that captures the collisional transfer of energy from hot ions to colder, rapidly cooling leptons. In all of our models, independent of the initial net vertical magnetic flux (NF) threading the disc, we find no evidence of disc evaporation. The ion heat flux into the disc is radiated away before conduction can heat the disc’s surface layers. When an initial NF is present, steady-state temperature, density, and outflow velocities in our model coronae are unaffected by conduction. Instead of facilitating disc evaporation, thermal conduction is more likely to feed the disc with plasma condensing out of the corona, particularly in flows without NF. Our work indicates that uncertainties in the amount of NF threading the disc hold far greater influence over whether or not the disc will evaporate into a radiatively inefficient accretion flow compared to thermal conduction. We speculate that a change in net flux mediates disc truncation/evaporation.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2022

Requirements for Progress in Understanding Solar Flare Energy Transport: The Impulsive Phase

Solar flares are a fundamental component of solar eruptive events (SEEs), along with solar energetic particles (SEPs) and coronal mass ejections (CMEs). Flare emission is the first component of a SEE to impact the Earth’s ionosphere which can set the stage for the later effects of the space weather event. Magnetic reconnection drives SEEs by restructuring the solar coronalmagnetic field, liberating a tremendous amount of energy which is partitioned into various physical manifestations: particle acceleration,mass and magnetic-field eruption, atmospheric heating, and the subsequent emission of radiation as solar flares. In this white paper we discuss the observational and theoretical advances required in order to make substantial progress in understanding the physical processes acting during the impulsive phase of a flare. That is, the initial rapid and intense period in which a tremendous amount of energy is released over the span of several minutes, resulting in the dramatic broadband increase to the solar radiative output. A second white paper by us covers the flare’s gradual phase, that is the decay phase where processes occur over longer timescales.

Graham S. Kerr↗
NASA NTRS1994

Observing stellar coronae with the Goddard High Resolution Spectrograph. 1: The dMe star AU microscopoii

We report on an observation of AU Mic taken with the Goddard High Resolution Spectrograph (GHRS) aboard the Hubble Space Telescope. The data consist of a rapid sequence of spectra covering the wavelength range 1345-1375 A with a spectral resolution of 10,000. The observations were originally intended to search for spectral variations during flares. No flares were detected during the 3.5 hr of monitoring. A method of reducing the noise while combining the individual spectra in the time series is described which resulted in the elimination of half of the noise while rejecting only a small fraction of the stellar signal. The resultant spectrum was of sufficient quality to allow the detection of emission lines with an integrated flux of 10(exp -15) ergs/sq cm(sec) or greater. Lines of C I, O I, O V, Cl I, and Fe XXI were detected. This is the first indisputable detection of the 1354 A Fe XXI line, formed at T approximately = 10(exp 7) K, on a star other than the Sun. The line was well resolved and displayed no significant bulk motions or profile asymmetry. From the upper limit on the observed line width, we derive an upper limit of 38 km/s for the turbulent velocity in the 10(exp 7) K plasma. An upper limit is derived for the flux of the 1349 A Fe XII line, formed at T approximately = 1.3 x 10(exp 6) K. These data are combined with contemporaneous GHRS and International Ultraviolet Explorer (IUE) data to derive the volume emission measure distribution of AU Mic over the temperature range 10(exp 4)-10(exp 7) K. Models of coronal loops in hydrostatic equilibrium are consistent with the observed volume emission measures of the coronal lines. The fraction of the stellar surface covered by the footprints of the loops depends upon the loop length and is less than 14% for lengths smaller than the stellar radius. From the upper limit to the estimated width of the Fe XXI line prfile we find that the we cannot rule out Alfven wave dissipation as a possible contributor to the required quiescent loop heating rate.

Maran, S. P.↗
NASA NTRS2012

Tooling Techniques Enhance Medical Imaging

They can release as much energy as tens of billions of hydrogen bombs exploding at the same time. They send protons and electrons rocketing at near the speed of light. They heat gas in the Sun s atmosphere to tens of millions of degrees Celsius. They send a blast of gas and particles toward Earth, posing a danger to spacecraft and astronauts outside the planet s magnetosphere, in rare cases even knocking out radio communications and power grids on the ground. They are so-called solar eruptive events, made up of solar flares and the often associated coronal mass ejections. Because of the scientific mystery of how these solar eruptions are produced on the Sun with such scale and force, and also the major role they play in space weather that can impact life on Earth, NASA researchers have innovated new methods of gathering information about these violent events. One NASA mission, the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) has significantly advanced understanding of solar flares since its launch in 2002. RHESSI scientists use the spacecraft s imaging spectrometer to piece together pictures of solar flares from the high-energy X-ray and gamma-ray radiation they emit. While there is still much to be learned, data gathered by RHESSI has revealed how magnetic fields in the vast expanse of the solar atmosphere may be the force that drives the immense explosions. The instrument has imaged around 50,000 flares to date, providing information that may explain not only the workings of solar flares but also of much more massive energy releases from distant objects like black holes and quasars. We have been able to make images from X-rays with much finer resolution and greater sensitivity than have ever been made before, says Brian Dennis, RHESSI Mission Scientist and astrophysicist in the Solar Physics Laboratory at Goddard Space Flight Center. The key to RHESSI s unprecedented capabilities lie in a set of essential components a NASA partner created for the mission. The manufacturing techniques developed to create the components have yielded innovations advancing medical imaging, transportation security, and even energy efficiency.

Source record↗
NASA NTRS1985

Observations of steady anomalous magnetic heating in thin current sheets

The Hard X-ray Imaging Spectrometer of the Solar Maximum Mission has yielded observations of a faint, steadily emitting loop-like structure, which have allowed the thermal evolution of this loop over a period of about 15 hr to be followed. Only 0.1 percent of the volume of the loop appears to be steadily heated, at the large rate of 0.6 erg/cu cm sec; this suggests that the heating represents the dissipation of magnetic fields in thin current sheets. Ion-kinetic tearing, as proposed by Galeev et al. (1981), is noted to be especially consonant with these observations. The source of the present X-ray emission is identified with the H-alpha filament in the same region. The present findings are held to constitute the first direct evidence for the steady dissipation of coronal magnetic fields via enhanced thin current sheet resistivity.

Martens, P. C. H.↗
NASA NTRS2008

Multi-wavelength Observations and Modelling of a Solar Flare

Aims: The aim of this work is to investigate the dynamic behavior of a C-class solar flare through the evolution of temperature, emission measure, energy loss and velocity. In particular, the variation of these properties with time are studied using multi-wavelength observations in combination with a recently developed 0-D hydrodynamic model. Methods: The temperature and emission measure evolution were studied using several instruments covering a wide range of temperatures - the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI, >5 MK), GOES-12 (5- 30 MK), the Transition Region and Coronal Explorer (TRACE 171 A, 1 MK) and the Coronal Diagnostic Spectrometer (CDS, 0.03-8 MK). The temperature and emission measure were analysed through the systematic cooling of flare plasma through the response functions of these instruments. These parameters were then investigated using the Enthalpy Based Thermal Evolution of Loops model (EBTEL). The Doppler shifts at both flare footpoints were analysed using five emission lines seen by CDS. Results: The flare began with clear evidence for pre-flare heating. Upflows of approx.90 km/s and low level emission, both observed in Fe XIX before the main impulsive phase were explained by pre-flare gentle chromospheric evaporation. During the main impulsive phase, the flare plasma was heated to a temperature of >13 MK in approximately 10 minutes. Explosive chromospheric evaporation was observed, driving upflows of approx.80 km/s in Fe XIX and simultaneous downflows of approx.20 km/s in He I and O v. At the peak of the Rare, conduction modelled by EBTEL was found to be the dominant loss mechanism, working efficiently to both lower the temperatures and drive gentle chromospheric evaporation. As the temperature fell below approx.8 MK, radiation became the dominant loss mechanism. During the final stages of the decay phase, downflowing plasma was observed at the footpoints in He I, O v and Mg x at velocities of up to approx.40 km/s, suggesting loop draining occurred. Conclusions. This is the first extensive study of the evolution of flare plasma using both spectroscopic and broad-band instruments in conjunction with a comprehensive hydrodynamic model. The flare began with pre-flare heating and then evolved following the predictions of the standard flare model. Detailed analysis of the plasma heating mechanisms was carried out and the heating function most consistent with observations was found to be Gaussian in shape. The simulations suggested that both direct heating and heating by a non-thermal beam played significant roles in this event.

Raftery, Claire L.↗
NASA NTRS1979

Minimum-flux coronal models for hydrogen and helium white dwarf atmospheres

Families of zero-mass-loss coronal models based on the minimum-flux prescription of Hearn (1975), in which bound-bound, bound-free, and free-free radiative processes with their differing emissivity vs. temperature laws are included, have been computed. These models are applied to the case of white-dwarf envelopes of pure hydrogen or helium, and the results are expressed as relationships between the required total energy flux, the coronal base pressure, and its temperature. The soft X-ray detection of Sirius by the ANS group is discussed. If all the X-ray flux is ascribed to a minimum-flux hydrogen corona surrounding the white dwarf Sirius B, it must have a temperature of 1.6 + or -0.3 million K and a base pressure of 110,000 + or - 40,000 dyne/sq cm. The surface energy flux needed to heat such a corona is (9 + or - 5) x 10 to the 10th erg/sq cm per sec.

Lampton, M.↗
NASA NTRS2017

Unravelling the Components of a Multi-Thermal Coronal Loop Using Magnetohydrodynamic Seismology

Coronal loops, constituting the basic building blocks of the active Sun, serve as primary targets to help understand the mechanisms responsible for maintaining multi-million Kelvin temperatures in the solar and stellar coronae. Despite significant advances in observations and theory, our knowledge on the fundamental properties of these structures is limited. Here, we present unprecedented observations of accelerating slow magnetoacoustic waves along a coronal loop that show differential propagation speeds in two distinct temperature channels, revealing the multi-stranded and multithermal nature of the loop. Utilizing the observed speeds and employing nonlinear force free magnetic field extrapolations, we derive the actual temperature variation along the loop in both channels, and thus are able to resolve two individual components of the multithermal loop for the first time. The obtained positive temperature gradients indicate uniform heating along the loop, rather than isolated foot point heating.

Prasad, S. Krishna↗
NASA NTRS1983

Comments concerning magnetic fields as a possible cause of rapid, irregular variability of early-type stars

It is noted that it is helpful to divide the atmosphere of an early-type star into two parts: a photosphere and a mantle. The photosphere can be modeled satisfactorily by normal model-atmosphere procedures. When modeling the mantle, one must take account of the deposition of nonradiative heat and momentum and one should recognize that the mantles of hot stars do not appear to be uniform or spherically symmetric. Five areas of discrepancy between classical theory and observation are noted and a possible way of modeling the mantles of early-type stars is outlined. The model consists of arcades of magnetic loops which form helmet-type structures in the equatorial band of the star, and of coronal-hole-type structures emmanating from weak unipolar regions which are chiefly distributed at polar latitudes.

Underhill, A. B.↗
NASA NTRS2023

Plasmoids, Flows, and Jets During Magnetic Reconnection in a Failed Solar Eruption

We report a detailed analysis of a failed eruption and flare in active region 12018 on 2014 April 3 using multiwavelength observations from the Solar Dynamics Observatory/Atmospheric Imaging Assembly, IRIS, STEREO, and Hinode/Solar Optical Telescope. At least four jets were observed to emanate from the cusp of this small active region (large bright point) with a null-point topology during the 2 hr prior to the slow rise of a filament. During the filament slow rise multiple plasma blobs were seen, most likely formed in a null-point current sheet near the cusp. The subsequent filament eruption, which was outside the IRIS field of view, was accompanied by a flare but remained confined. During the explosive flare reconnection phase, additional blobs appeared repetitively and moved bidirectionally within the flaring region below the erupting filament. The filament kinked, rotated, and underwent leg–leg reconnection as it rose, yet it failed to produce a coronal mass ejection. Tiny jet-like features in the fan loops were detected during the filament slow rise/preflare phase. We interpret them as signatures of reconnection between the ambient magnetic field and the plasmoids leaving the null-point sheet and streaming along the fan loops. We contrast our interpretation of these tiny jets, which occur within the large-scale context of a failed filament eruption, with the local nanoflare-heating scenario proposed by Antolin et al.

Sun: jets↗