Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computational homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Applicability of the Effective-Medium Approximation to Heterogeneous Aerosol Particles.

The effective-medium approximation (EMA) is based on the assumption that a heterogeneous particle can have a homogeneous counterpart possessing similar scattering and absorption properties. We analyze the numerical accuracy of the EMA by comparing superposition T-matrix computations for spherical aerosol particles filled with numerous randomly distributed small inclusions and Lorenz-Mie computations based on the Maxwell-Garnett mixing rule. We verify numerically that the EMA can indeed be realized for inclusion size parameters smaller than a threshold value. The threshold size parameter depends on the refractive-index contrast between the host and inclusion materials and quite often does not exceed several tenths, especially in calculations of the scattering matrix and the absorption cross section. As the inclusion size parameter approaches the threshold value, the scattering-matrix errors of the EMA start to grow with increasing the host size parameter and or the number of inclusions. We confirm, in particular, the existence of the effective-medium regime in the important case of dust aerosols with hematite or air-bubble inclusions, but then the large refractive-index contrast necessitates inclusion size parameters of the order of a few tenths. Irrespective of the highly restricted conditions of applicability of the EMA, our results provide further evidence that the effective-medium regime must be a direct corollary of the macroscopic Maxwell equations under specific assumptions.

aerosols↗

Kinetics of small particle activation in supersaturated vapors

We examine the nucleated (with barrier) activation of perfectly wetting (zero contact angle) particles ranging from bulk size down to one nanometer. Thermodynamic properties of the particles, coated with liquid layers of varying thickness and surrounded by vapor, are analyzed. Nano-size particles are predicted to activate at relative humidity below the Kelvin curve on crossing a nucleation barrier, located at a critical liquid layer thickness such that the total particle size (core + liquid layer) equals the Kelvin radius (Fig. 1). This barrier vanishes precisely as the critical layer thickness approaches the thin layer limit and the Kelvin radius equals the radius of the particle itself. These considerations are similar to those included in Fletcher's theory (Fletcher, 1958) however the present analysis differs in several important respects. Firstly, where Fletcher used the classical prefactor-exponent form for the nucleation rate, requiring separate estimation of the kinetic prefactor, we solve a diffusion-drift equation that is equivalent to including the full Becker-Doering (BD) multi-state kinetics of condensation/evaporation along the growth coordinate. We also determine the mean first passage time (MFPT) for barrier crossing (Wedekind et al., 2007), which is shown to provide a generalization of BD nucleation kinetics especially useful for barrier heights that are considerably lower than those typically encountered in homogeneous vapor-liquid nucleation, and make explicit comparisons between the MFPT and BD kinetic models. Barrier heights for heterogeneous nucleation are computed by a thermo-dynamic area construction introduced recently to model deliquescence and efflorescence of small particles (McGraw and Lewis, 2009). In addition to providing a graphical representation of the activation process that offers new insights, the area construction provides a molecular approach that avoids explicit use of the interfacial tension. Typical barrier profiles for water condensation on particles of different size are shown in Fig. 2. The main emphasis of this paper lies in the computation of these barriers and barrier crossing rates by the various methods described. The present theory is especially relevant to determining the lower size limit for particle detection in condensation particle counters. Recently it has been shown that particles can take on liquid at sizes significantly smaller than predicted from the Kelvin relation in the no-barrier case (Winkler et al., 2008). This implies a detection principle based on the activated nucleation model that is the focus of the present study. Calculations are presented for water, n-propanol, and several other condensable vapors.

54 ENVIRONMENTAL SCIENCES↗

Microstructures in the 6060 aluminium alloy after various severe plastic deformation treatments

This paper presents the results concerning the microstructural refinement of the industrial 6060 aluminium alloy processed by severe plastic deformation (SPD). The high level of plastic deformation was achieved using the three methods: hydrostatic extrusion (HE), equal channel angular extrusion (ECAE) and extrusion torsion (ET), which differed in the dynamics of the loading, intensity and homogeneity of the plastic strain field. Microstructure analyses were performed before and after SPD deformation using a transmission (TEM) and a scanning electron microscope (SEM). The refined microstructures were examined qualitatively and quantitatively by the stereological methods and computer image analyses. The microstructure of the industrial 6060 aluminium alloy after deformation was characterized by an average grain size of about 0.4 {mu}m. The results show that the precipitates strongly affect the degree of refinement and the mechanism of microstructural transformations. During the SPD, the second phase particles break apart and homogenize. The HE method generates the largest increase of the volume fraction of the small primary particles. Moreover, the HE process is most effective in reducing the primary particle size. During HE and ECAE processes the second phase precipitates dissolve partially and change their shape. - Research Highlights: {yields} SPD results in a significant increase in the density of the small primary particles. {yields} SPD homogenizes the particle size distribution. {yields} HE and ECAE processes bring nano-grains in the vicinity of the primary particles. {yields} HE and ECAE processing results in the {beta}' precipitates partial dissolutions. {yields} During HE and ECAE processes the {beta}' particles change their shape.

36 MATERIALS SCIENCE↗

Extensional flow convecting a reactant undergoing a first order homogeneous reaction and diffusional mass transfer from a sphere at low to intermediate Peclet and Damkohler numbers

Forced convective diffusion-reaction is considered for viscous axisymmetric extensional convecting velocity in the neighborhood of a sphere. For Peclet numbers in the range 0.1 less than or equal to Pe less than or equal to 500 and for Damkohler numbers increasing with increasing Pe but in the overall range 0.02 less than or equal to Da less than or equal to 10, average and local Sherwood numbers have been computed. By introducing the eigenfunction expansion c(r, Theta) = Sum of c(n)(r)P(n)(cos Theta) into the forced convective diffusion equation for the concentration of a chemical species undergoing a first order homogeneous reaction and by using properties of the Legendre functions Pn(cos Theta), the variable coefficient PDE can be reduced to a system of N + 1 second order ODEs for the radial functions c(sub n)(r), n = 0, 1, 2,..., N. The adaptive grid algorithm of Pereyra and Lentini can be used to solve the corresponding 2(N + 1) first order differential equations as a two-point boundary value problem on 1 less than or equal to r less than or equal to r(sub infinity). Convergence of the expansion for a specific value of N can thus be established and provides 'spectral' behavior as well as the full concentration field c(r, Theta).

Shah, N. Y.↗

Reassessment of uncertainties for the PU-MET-INTER-002 benchmark - 14432

Uncertainty for the PU-MET-INTER-002 benchmark of ZPR-6/10 was unusually large for a ZPR assembly and was dominated by the uncertainties in matrix tube pitch and composition uncertainties for plutonium, graphite and stainless steel plates. The original uncertainty analysis for PU-MET-INTER-002 was limited by computer resources, software and the nuclear data available in 2002, all of which have been improved since. An as-built Monte Carlo model of ZPR-6/10 was used to quantify components of the transformation from the detailed model to a simplified RZ benchmark in 2002. Compositional uncertainties were estimated based upon TWODANT calculations of the RZ benchmark model (20 group, S{sub 8} - P{sub 1}). MC{sup 2}-2 was used with END/B-V.2 data to generate homogenized cross section data for TWODANT. The MC{sup 2}-2 calculations did not account for lattice cell spatial heterogeneity which was driven by the manual process required to generate ∼80 modifications to the deterministic model and by the software limitations of MC{sup 2}-2. Improvements to DIF3D-VARIANT, development of the MC{sup 2}-3 and BuildZPRModel codes, and better computer resources make accurate 3D transport calculations of reactivity changes practical today. BuildZPRModel imports the as-built geometry and creates a 'drawer' homogenized DIF3D model where each radial DIF3D mesh is the exact size of a single ZPR matrix tube and drawer. A MC{sup 2}-3 input is constructed for each drawer to produce homogenized cross section data where the spatial cell heterogeneity is captured by solving a 1D MOC transport calculation on the ultrafine energy group level. Collapsing 3D drawers into 1D MC{sup 2}-3 drawer models follows conventional procedures and is done by BuildZPRModel. MCNP6 was used to re-compute relevant geometry components of the uncertainty using ENDF/B-VII.0 data with the as-built model. Changes in the geometry components compared with earlier results are insignificant. DIF3D calculations of the compositional uncertainties were performed using 33, 70, 116, 230, 425, and 703 group energy structures and selectively combined with P{sub 3}-P{sub 7} transport approximations and P{sub 1} and P{sub 3} scattering kernels. 3D diffusion theory calculations were also performed for comparison. Many composition uncertainty components were essentially unchanged with the updated methodology. However, the dominant experimental uncertainty for PU-MET-INTER-002 is the composition of stainless steel. The new calculations reduce the stainless steel uncertainty from ∼115 pcm to ∼70 pcm which significantly reduces the total uncertainty for PU-MET-INTER-002. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Optimality Conditions for Semilinear Hyperbolic Equations with Controls in Coefficients

An optimal control problem for semilinear hyperbolic partial differential equations is considered. The control variable appears in coefficients. Necessary conditions for optimal controls are established by method of two-scale convergence and homogenized spike variation. Results for problems with state constraints are also stated.

97 MATHEMATICS AND COMPUTING↗

Active-Space N -Representability Constraints for Variational Two-Particle Reduced Density Matrix Calculations

The ground-state energy of a system of fermions can be calculated by minimizing a linear functional of the two-particle reduced density matrix (2-RDM) if an accurate set of N-representability conditions is applied. In this Letter we introduce a class of linear N-representability conditions based on exact calculations on a reduced active space. Unlike wave-function-based approaches, the 2-RDM methodology allows us to combine information from calculations on different active spaces. By adding active-space constraints, we can iteratively improve our estimate for the ground-state energy. Applying our methodology to a 1D Hubbard model yields a significant improvement over traditional 2-positivity constraints with the same computational scaling.

74 ATOMIC AND MOLECULAR PHYSICS↗

WE-G-207-05: Relationship Between CT Image Quality, Segmentation Performance, and Quantitative Image Feature Analysis

Purpose: Segmentation quality can affect quantitative image feature analysis. The objective of this study is to examine the relationship between computed tomography (CT) image quality, segmentation performance, and quantitative image feature analysis. Methods: A total of 90 pathology proven breast lesions in 87 dedicated breast CT images were considered. An iterative image reconstruction (IIR) algorithm was used to obtain CT images with different quality. With different combinations of 4 variables in the algorithm, this study obtained a total of 28 different qualities of CT images. Two imaging tasks/objectives were considered: 1) segmentation and 2) classification of the lesion as benign or malignant. Twenty-three image features were extracted after segmentation using a semi-automated algorithm and 5 of them were selected via a feature selection technique. Logistic regression was trained and tested using leave-one-out-cross-validation and its area under the ROC curve (AUC) was recorded. The standard deviation of a homogeneous portion and the gradient of a parenchymal portion of an example breast were used as an estimate of image noise and sharpness. The DICE coefficient was computed using a radiologist’s drawing on the lesion. Mean DICE and AUC were used as performance metrics for each of the 28 reconstructions. The relationship between segmentation and classification performance under different reconstructions were compared. Distributions (median, 95% confidence interval) of DICE and AUC for each reconstruction were also compared. Results: Moderate correlation (Pearson’s rho = 0.43, p-value = 0.02) between DICE and AUC values was found. However, the variation between DICE and AUC values for each reconstruction increased as the image sharpness increased. There was a combination of IIR parameters that resulted in the best segmentation with the worst classification performance. Conclusion: There are certain images that yield better segmentation or classification performance. The best segmentation Result does not necessarily lead to the best classification Result. This work has been supported in part by grants from the NIH R21-EB015053. R Nishikawa is receives royalties form Hologic, Inc.

60 APPLIED LIFE SCIENCES↗

Performance Improvements of the Griffin Solvers in FY24

The Griffin code is a MOOSE-based reactor physics application jointly developed by Idaho National Laboratory and Argonne National Laboratory under the Department of Energy Office of Nuclear Energy Nuclear Energy Advanced Modeling and Simulation Program. This fiscal year, we have made significant efforts to improve the performance of transport solver options and cross-section generation for the efficient use of Griffin in advanced reactor applications. For the HFEM-PN solver, the residual evaluations of HFEM kernels were optimized by utilizing the pre- computed averaged cross sections for individual elements. Numerical integration involving the evaluation of basis functions at quadrature points was bypassed by facilitating precomputed element mass matrices for response matrices. Red-black iterations were improved by introducing a new generalized minimum residual based solver. The memory usage of response matrix storage was significantly reduced by applying basis function rotations on interfaces and calculating volumetric odd-parity moments on the fly. Additionally, the adjoint flux and transient calculation capabilities of the HFEM-PN solver were successfully implemented and verified using the TWIGL benchmark problem. For the DFEM-SN solver, memory footprint and computation time were significantly reduced by not treating angular flux vectors as the MOOSE nonlinear system vectors. Specifically for IQS, scalar adjoint weighting was introduced to further eliminate angular adjoint flux storage in the MOOSE auxiliary system. It was demonstrated through the three-dimensional Advanced Burner Test Reactor core problem that the memory usage for transient calculations with the IQS method was reduced by over 7.5× compared to before the optimizations. For the self-shielding application programming interface, a new double-heterogeneity treatment method, named the Bell Function-Based Analytic Two-Region Slowing Down Method, was developed to efficiently flux-volume homogenize TRISO particles with the matrix. Additionally, optimizations were made to hyper- fine group (HFG) slowing down calculations by pretabulating collision probability coefficients and grouping isotopes, significantly reducing the computational time for calculating scattering sources per HFG. Lastly, the pin power reconstruction module was extended to account for temporal behavior in a microreactor analysis problem, specifically for a control drum transient. Verification tests for each of these improvements demonstrated significant performance enhancements and memory reduction.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Temperature Homogeneity under Selective and Localized Microwave Heating in Structured Flow Reactors

Selective heating of different phases of multiphase systems via microwaves can result in energy savings and suppression of side reactions. However, materials properties and operating conditions that maximize temperature gradients are poorly understood. Here we utilize computational fluid dynamics (CFD) computations and temperature measurements in structured flow reactors (monoliths) in a monomodal microwave cavity to assess the temperature difference between the walls and the fluid and develop a simple lumped model to estimate when temperature gradients exist. We also explore the material’s thermal and electrical properties of structured reactors for isothermal catalyst conditions. We propose that CFD simulations can be used as a nonintrusive, predictive tool of temperature homogeneity. Importantly, we demonstrate that localized heating in the bed under several conditions rather than selective heating is responsible for the selectivity enhancement. Furthermore, our results indicate that structured beds made of high thermal conductivity materials avoid arcing and enable temperature homogeneity and low electrical conductivity materials allow microwaves to penetrate the domain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multistage nucleation pathway in LiF molten salt mirrors the crystal–melt interface structure

Despite over a century of studies, fundamental questions remain about the processes governing crystal nucleation from melts or solutions. Research over the past three decades has presented mounting evidence for kinetic pathways of crystal nucleation that are more complex than envisioned by the simplest forms of classical theory. Such observations have been presented for colloidal and elemental systems with covalent and metallic bonding. Despite the technological and geochemical importance of molten salts, similar studies for these ionically bonded systems are currently lacking. Here we develop a machine learning interatomic potential for a model ionic system: LiF. The potential features quantum-level accuracy for both liquid and multiple solid polymorphs over wide temperature and pressure ranges and accurately reproduces experimentally measured properties. Thanks to the efficiency of the potential, which enables microsecond-scale molecular dynamics simulations, induction times for nucleation of LiF solids from their melts are computed over a range of undercoolings. With the aid of a set of robust local order parameters established here, the simulations reveal that homogeneous crystal nucleation in undercooled melts preferentially initiates from liquid regions showing slow dynamics and high bond orientational order simultaneously, and the second-shell order of both precritical nuclei and the surface of postcritical nuclei is dominated by hexagonal close packing and body-centered cubic local structure, even though the nucleus core is dominated by face-centered cubic structure corresponding to the stable rocksalt crystal structure. Finally, we establish a connection between the crystallization pathway and the equilibrium crystal-melt interface structure.

Applied Physical Sciences↗

Quantum simulations of hydrodynamics via the Madelung transformation

Developing numerical methods to simulate efficiently nonlinear fluid dynamics on universal quantum computers is a challenging problem. In this paper, a generalization of the Madelung transform is defined to solve quantum relativistic charged fluid equations interacting with external electromagnetic forces via the Dirac equation. The Dirac equation is discretized into discrete-time quantum walks which can be efficiently implemented on universal quantum computers. A variant of this algorithm is proposed to implement simulations using current noisy intermediate scale quantum (NISQ) devices in the case of homogeneous external forces. High resolution (up to N=2 17 grid points) numerical simulations of relativistic and nonrelativistic hydrodynamical shocks on current IBM NISQs are performed with this algorithm. Here, this paper demonstrates that fluid dynamics can be simulated on NISQs, and opens the door to simulating other fluids, including plasmas, with more general quantum walks and quantum automata.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Full Core Reactor Analysis: Running Denovo on Jaguar

Fully-consistent, full-core, 3D, deterministic neutron transport simulations using the orthogonal mesh code Denovo were run on the massively parallel computing architecture Jaguar XT5. Using energy and spatial parallelization schemes, Denovo was able to efficiently scale to more than 160k processors. Cell-homogenized cross sections were used with step-characteristics, linear-discontinuous finite element, and trilinear-discontinuous finite element spatial methods. It was determined that using the finite element methods gave considerably more accurate eigenvalue solutions for large-aspect ratio meshes than using step-characteristics.

Denovo↗

Radiative transfer calculated from a Markov chain formalism

The theory of Markov chains is used to formulate the radiative transport problem in a general way by modeling the successive interactions of a photon as a stochastic process. Under the minimal requirement that the stochastic process is a Markov chain, the determination of the diffuse reflection or transmission from a scattering atmosphere is equivalent to the solution of a system of linear equations. This treatment is mathematically equivalent to, and thus has many of the advantages of, Monte Carlo methods, but can be considerably more rapid than Monte Carlo algorithms for numerical calculations in particular applications. We have verified the speed and accuracy of this formalism for the standard problem of finding the intensity of scattered light from a homogeneous plane-parallel atmosphere with an arbitrary phase function for scattering. Accurate results over a wide range of parameters were obtained with computation times comparable to those of a standard 'doubling' routine. The generality of this formalism thus allows fast, direct solutions to problems that were previously soluble only by Monte Carlo methods. Some comparisons are made with respect to integral equation methods.

Esposito, L. W.↗

Lunar near-surface shear wave velocities at the Apollo landing sites as inferred from spectral amplitude ratios

The horizontal-to-vertical amplitude ratios of the long-period seismograms are reexamined to determine the shear wave velocity distributions at the Apollo 12, 14, 15, and 16 lunar landing sites. Average spectral ratios, computed from a number of impact signals, were compared with spectral ratios calculated for the fundamental mode Rayleigh waves in media consisting of homogeneous, isotropic, horizontal layers. The shear velocities of the best fitting models at the different sites resemble each other and differ from the average for all sites by not more than 20% except for the bottom layer at station 14. The shear velocities increase from 40 m/s at the surface to about 400 m/s at depths between 95 and 160 m at the various sites. Within this depth range the velocity-depth functions are well represented by two piecewise linear segments, although the presence of first-order discontinuities cannot be ruled out.

Horvath, P.↗

Noninvasive Fluid Level Sensor for Organometallic Sources

Two ultrasonic methods available for measuring level of organometallic liquid in stainless-steel (or other homogeneous solid) container. Methods require no disassembly or weighing of container. Commercially available ultrasonic flaw detectors, some of which have digital readouts and computer interfaces, used in techniques. Both methods used in crystal growth to determine level of liquids contained in sealed, opaque containers.

Gerdes, W.↗

Measuring the effects of heterogeneity on distributed systems

Distributed computer systems in daily use are becoming more and more heterogeneous. Currently, much of the design and analysis studies of such systems assume homogeneity. This assumption of homogeneity has been mainly driven by the resulting simplicity in modeling and analysis. A simulation study is presented which investigated the effects of heterogeneity on scheduling algorithms for hard real time distributed systems. In contrast to previous results which indicate that random scheduling may be as good as a more complex scheduler, this algorithm is shown to be consistently better than a random scheduler. This conclusion is more prevalent at high workloads as well as at high levels of heterogeneity.

El-Toweissy, Mohamed↗