Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “capability development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of neutron spin-phase imaging for amorphous magnetic thin film investigation

Neutron spin-phase imaging (NSPI) capability was developed to study the magnetization distribution of an amorphous magnetic thin film. The local magnetization under different applied magnetic fields between 0.09 and 1.36 mT was investigated. The developed radio frequency flippers showed more than 95% flipping efficiency under these fields. A spatial resolution of ~0.4 mm and field of view of ~24 mm x 27 mm were achieved. In conclusion, the bulk property of the random distributions of the magnetization and magnetic field distribution ranging between ~1.1 and 1.4 T were observed showing that NSPI is a useful technique for investigating the spatial dependence of magnetic properties of amorphous magnetic thin films.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Monitoring and Enhancing Plant Productivity

Researchers at Los Alamos National Laboratory are developing extensive capabilities to improve plant drought tolerance; water and nutrient use efficiency and reduce greenhouse gas emissions from agriculture and natural systems. By monitoring plant function, stress responses, water and nutrient use, greenhouse gas emissions, and analyzing rhizosphere and plant microbiomes, results have shown improved plant performance and stress tolerance, production of plant pro- and prebiotics, and ability to control greenhouse gas emissions from indoor and outdoor agricultural systems. We seek a commercialization partner to fund precision agriculture specific research & development (R&D) through a Cooperative Research and Development Agreement (CRADA). Our goal is to further research and develop our laboratory scale capabilities with a collaborative partner to achieve two goals: 1) reduce the use of water and fertilization in agricultural systems; and 2) create carbon neutral food and energy technologies to support precision agriculture at commercial scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

BISON High Burnup Structure Modeling Capabilities Validated with a Selection of the Halden IFA-650 Rods

The U.S. Department of Energy (DOE)’s Nuclear Energy Advanced Modeling and Simulation (NEAMS)program aims to develop predictive capabilities using computational methods for the analysis and design of advanced reactor and fuel cycle systems. This program has been supporting the development of BISON, a high-fidelity and high-resolution fuel performance tool at the engineering scale. This document continues analysis and refinement of capabilities added to BISON early this calendar year in regards to the incorporation of capabilities applicable to extended burnups in response to industry interest. Details are provided on high burnup thermal conductivity models, a refitting of the high-burnup structure (HBS) porosity formation model to include additional data, the coupling of the HBS volume fraction model to thermal conductivity and fine fragmentation models, and validation activities. The IFA-650.4 and IFA-650.9 loss of coolant accident (LOCA) analyses are revisited with the latest developments in this report. A new validation case, IFA-650.14 has also been added to the BISON test suite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

SAM Enhancements and Model Developments for Molten-Salt-Fueled Reactors

To support the development and utilization of the SAM code for molten-salt-fueled reactor (MSR) safety analysis and licensing, an effort was devoted to enhancing code capabilities and developing reference models for the MSR primary loop. A reference standard problem of a prototypical reactor design is foundational to NRC to verify the adequacy of computer codes and evaluation models for a specific reactor type. A thermo-fluid model of the Molten Salt Reactor Experiment (MSRE) has been developed. The MSRE primary loop model consists of a 2-D core region and external core components in 1-D or 0-D. Both the steady-state and a transient scenario are simulated. The porous medium model is utilized for both the molten salt fluid channels and the moderator matrix in the MSRE core. The use of the porous medium model for the MSRE core is verified with the higher-fidelity simulation results using 1-D representations of the fluid channels and 3-D modeling of core structures. To further enhance SAM multi-scale simulation capabilities for MSRs, a mass transport model is developed and implemented in SAM multi-dimension flow module for modeling of species transport such as delayed neutron precursors in MSRs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2017

Development and Testing of Carbon-Carbon Nozzle Extensions for Upper Stage Liquid Rocket Engines

Carbon-carbon (C-C) composite nozzle extensions are of interest for use on a variety of launch vehicle upper stage engines and in-space propulsion systems. The C-C nozzle extension technology and test capabilities being developed are intended to support National Aeronautics and Space Administration (NASA) and Department of Defense (DOD) requirements, as well as those of the broader Commercial Space industry. For NASA, C-C nozzle extension technology development primarily supports the NASA Space Launch System (SLS) and NASA's Commercial Space partners. Marshall Space Flight Center (MSFC) efforts are aimed at both (a) further developing the technology and databases needed to enable the use of composite nozzle extensions on cryogenic upper stage engines, and (b) developing and demonstrating low-cost capabilities for testing and qualifying composite nozzle extensions. Recent, on-going, and potential future work supporting NASA, DOD, and Commercial Space needs will be discussed. Information to be presented will include (a) recent and on-going mechanical, thermal, and hot-fire testing, as well as (b) potential future efforts to further develop and qualify domestic C-C nozzle extension solutions for the various upper stage engines under development.

Valentine, Peter G.↗
NASA NTRS1992

Options for a lunar base surface architecture

The Planet Surface Systems Office at the NASA Johnson Space Center has participated in an analysis of the Space Exploration Initiative architectures described in the Synthesis Group report. This effort involves a Systems Engineering and Integration effort to define point designs for evolving lunar and Mars bases that support substantial science, exploration, and resource production objectives. The analysis addresses systems-level designs; element requirements and conceptual designs; assessments of precursor and technology needs; and overall programmatics and schedules. This paper focuses on the results of the study of the Space Resource Utilization Architecture. This architecture develops the capability to extract useful materials from the indigenous resources of the Moon and Mars. On the Moon, a substantial infrastructure is emplaced which can support a crew of up to twelve. Two major process lines are developed: one produces oxygen, ceramics, and metals; the other produces hydrogen, helium, and other volatiles. The Moon is also used for a simulation of a Mars mission. Significant science capabilities are established in conjunction with resource development. Exploration includes remote global surveys and piloted sorties of local and regional areas. Science accommodations include planetary science, astronomy, and biomedical research. Greenhouses are established to provide a substantial amount of food needs.

Roberts, Barney B.↗
NASA NTRS1971

Development of lightweight aluminum hollowcore solar cell array technology

A baseline configuration for a three section folding array, with retraction capability, was developed which would utilize electroformed aluminum hollowcore substrates and beryllium frames. The three section array was not fabricated because of difficulties with impurities in the aluminum electroforming bath. A procedure was developed for etching the copper mandrel from virtually any size of aluminum hollowcore panel in approximately one hour. Procedures were developed for analyzing the content of peroxide, water, total aluminum, and lithium-aluminum-hydride in an aluminum electroforming solution.

Carlson, J. A.↗
NASA NTRS1991

Vertical mixing and methane photochemistry in the atmosphere of Uranus: Analysis of Voyager UVS occultation experiments

Extensive capabilities were developed in the analysis of ultraviolet spectrometer (UVS) absorptive lightcurves. The application of these capabilities to the Voyager UVS data sets from Uranus and Neptune has provided significant findings regarding the stratospheres of these planets. In particular, the direct comparison between photochemical models and UVS measurements accomplished by these efforts is unique, and it helps to guarantee that the information returned by the Voyager 2 spacecraft is being used to the fullest extent possible.

Bishop, James↗
NASA NTRS2011

Overview of the Helios Version 2.0 Computational Platform for Rotorcraft Simulations

This article summarizes the capabilities and development of the Helios version 2.0, or Shasta, software for rotary wing simulations. Specific capabilities enabled by Shasta include off-body adaptive mesh refinement and the ability to handle multiple interacting rotorcraft components such as the fuselage, rotors, flaps and stores. In addition, a new run-mode to handle maneuvering flight has been added. Fundamental changes of the Helios interfaces have been introduced to streamline the integration of these capabilities. Various modifications have also been carried out in the underlying modules for near-body solution, off-body solution, domain connectivity, rotor fluid structure interface and comprehensive analysis to accommodate these interfaces and to enhance operational robustness and efficiency. Results are presented to demonstrate the mesh adaptation features of the software for the NACA0015 wing, TRAM rotor in hover and the UH-60A in forward flight.

Sankaran, Venkateswaran↗
NASA NTRS2014

Application of the Tool for Turbine Engine Closed-loop Transient Analysis (TTECTrA) for Dynamic Systems Analysis

Systems analysis involves steady-state simulations of combined components to evaluate the steady-state performance, weight, and cost of a system; dynamic considerations are not included until later in the design process. The Dynamic Systems Analysis task, under NASAs Fixed Wing project, is developing the capability for assessing dynamic issues at earlier stages during systems analysis. To provide this capability the Tool for Turbine Engine Closed-loop Transient Analysis (TTECTrA) has been developed to design a single flight condition controller (defined as altitude and Mach number) and, ultimately, provide an estimate of the closed-loop performance of the engine model. This tool has been integrated with the Commercial Modular Aero-Propulsion System Simulation 40,000 (CMAPSS 40k) engine model to demonstrate the additional information TTECTrA makes available for dynamic systems analysis. This dynamic data can be used to evaluate the trade-off between performance and safety, which could not be done with steady-state systems analysis data. TTECTrA has been designed to integrate with any turbine engine model that is compatible with the MATLAB Simulink (The MathWorks, Inc.) environment.

control↗
NASA NTRS2014

Application of the Tool for Turbine Engine Closed-loop Transient Analysis (TTECTrA) for Dynamic Systems Analysis

Systems analysis involves steady-state simulations of combined components to evaluate the steady-state performance, weight, and cost of a system; dynamic considerations are not included until later in the design process. The Dynamic Systems Analysis task, under NASAs Fixed Wing project, is developing the capability for assessing dynamic issues at earlier stages during systems analysis. To provide this capability the Tool for Turbine Engine Closed-loop Transient Analysis (TTECTrA) has been developed to design a single flight condition controller (defined as altitude and Mach number) and, ultimately, provide an estimate of the closed-loop performance of the engine model. This tool has been integrated with the Commercial Modular Aero-Propulsion System Simulation 40,000(CMAPSS40k) engine model to demonstrate the additional information TTECTrA makes available for dynamic systems analysis. This dynamic data can be used to evaluate the trade-off between performance and safety, which could not be done with steady-state systems analysis data. TTECTrA has been designed to integrate with any turbine engine model that is compatible with the MATLABSimulink (The MathWorks, Inc.) environment.

systems analysis↗
NASA NTRS2023

Low-Cost Testing in Representative Lunar Regolith Environment

Rapid prototyping and testing are key enablers of iterative designs common in early technology research and development. Testing in a dusty environment is critical to prepare the Cryogenic Magnetic Coupler for lunar operations. To enable early and iterative testing of dust mitigation concepts, a low-cost, low-fidelity representative lunar regolith environment was developed at the National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center (Edwards, California). Based on preliminary testing with this test setup, a similar setup may be of interest to universities and other entities looking to develop the capability to safely test relatively small-scale components with lunar regolith simulant. The development of this lunar regolith test chamber and results from preliminary testing are presented in this paper. Also discussed are further development strategies for the potential improvement of this setup.

Scott Stebbins↗
NASA NTRSDate not supplied

Low Latency Flux and Concentration Datasets in Support of Greenhouse Gas Monitoring Based on NASA's GEOS Modeling and Data Assimilation System

We present efforts to develop space-based greenhouse gas monitoring systems that can provide low latency information and traceability to independent observations. Through support from its Carbon Monitoring System program, NASA has developed the capability to assimilate XCO2 retrievals from the Orbiting Carbon Observatory, 2 (OCO-2) into the Goddard Earth Observing System (GEOS) Constituent Data Assimilation System (CoDAS) to create gap-filled, three-dimensional (3D) estimates of CO2 mixing ratio. When OCO-2 data are not available, concentration fields are further informed by a bottom-up flux package based on remotely sensed fire radiative power, nighttime lights, and vegetation reflectance combined with estimates of atmospheric growth rate based on surface in situ data. The 3D nature of this dataset supports evaluation with independent aircraft data, helping to ensure transparency of remotely sensed data products. These quasi-operational data are currently produced 2-3 months behind real time and are distributed via NASA and international dashboard services to a variety of end users. In this presentation, we provide an overview of the system as well as remaining data gaps and modeling challenges. We also highlight the application of this dataset for detecting emissions anomalies associated with COVID-19 and comparing against independent emissions estimates. Finally, we highlight a new NASA initiative called the Earth Information System (EIS), which aims to support open science and applications by leveraging emerging cloud computing capabilities to increase access to NASA’s greenhouse gas datasets, opportunities for co-development, and transparency in methods for analysis and flux attribution.

Lesley Ott↗
NASA NTRS2021

Exploration Medical Capability Medical Scenarios

Medical systems supporting exploration class missions to cislunar space, the lunar surface, and the vicinity of Mars require an evolution in medical capability beyond that available for today’s low Earth orbit centric paradigm. Progress in developing more capable medical systems will be driven by the requirements of prolonged mission duration, increasing distance from Earth, and the realities of orbital mechanics, all necessitating a concomitant need for progressively Earth independent medical decision-making capabilities. These medical systems (which include the crewmembers) are expected to be capable of evaluating, diagnosing, treating and managing a defined list of medical conditions as well as addressing unanticipated medical conditions that may arise. The prioritized medical capabilities and associated resources needed to treat these medical conditions and support anticipated inflight medical events provide robust content that informs system designers and allows for a more complete evaluation of both medical and overall mission risk. Communication of these medical capabilities to system, vehicle, and mission designers can be enhanced using scenarios that characterize the system’s operations. Carefully considered scenarios provide the context needed to explore expected human and system interfaces, roles of ground and inflight crew (including periods of interrupted or delayed communications), identify training needs, assess data needs, etc. Mission-based scenario content varies dependent upon the needs, medical capabilities, conditions and context they are intended to illustrate. This document explicitly seeks to capture and codify those scenarios that have been useful to the Exploration Medical Capability Element of the Human Research Program in defining the enhanced medical systems required for future space exploration. It is expected that this document will continue to evolve through the refinement and characterization of current and future scenarios, respectively, as our knowledge grows, and requirements increasingly focus on Earth independent spaceflight operations.

Derek M Nusbaum↗
DOE OSTI2024

Initial Development of Fusion Magnet Simulation Capabilities for Performance and Safety Evaluation Using the MOOSE Framework

Fusion energy holds the promise of being a transformative technology as a carbon-neutral, sustainable source of energy. Whole device modeling and the development of fusion digital twins will be increasingly important for emerging fusion device concepts at both national laboratories and within the commercial fusion industry. However, meeting the challenge of whole device modeling of fusion energy devices requires robust, multiphysics, multiscale modeling and simulation technologies capable of running on large-scale supercomputers. Detailed analysis of individual systems at-scale is also required to ensure safe and efficient operation as well as provide the safety basis for future device designs and licensing activities. In a tokamak, toroidal and poloidal magnets confine and shape the fusion plasma to promote the fusion reaction. High plasma temperatures and high magnetic field requirements in modern design concepts (leading to high amounts of energy stored within each magnet) impose electrical, thermal, and mechanical loads on the magnet components, which in turn impacts the safety considerations of the magnet and their supporting systems. Idaho National Laboratory (INL) has a history of working in this space, including development and benchmarking of the Magnetic System Circuitry Analysis Program (MSCAP) and Magnet Arcing (MAGARC) codes to study magnet quench events; notably, MAGARC was used to study quenching during the ITER Engineering Design Activity. However, these legacy codes and capabilities are not parallel and scalable, and new tools are required for future advances in this area, which leads to the INL-developed Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. Developed originally for fission reactor systems under United States Department of Energy, Office of Nuclear Energy modeling and simulation programs, the MOOSE framework has been well-suited to multiscale, multiphysics modeling and simulation needs for nuclear systems. The framework is open-source, well-tested, under continuous development and deployment, and developed to a Nuclear Quality Assurance, Level 1 software quality standard. MOOSE has also been used in the fusion space previously in several projects: INL’s Tritium Migration Analysis Program, Version 8 (TMAP8) for tritium migration, UK Atomic Energy Authority’s A Unified Resource for OpenMC (fusion) Reactor Applications (AURORA) code for fusion thermo-mechanical and neutronics analysis, and Argonne National Laboratory’s Cardinal for high-fidelity computational fluid dynamics and neutronics. However, to model superconducting magnets, several MOOSE enhancements are required: additions to the current MOOSE electromagnetic capabilities, new material libraries for superconductors of interest (such as YBCO), as well as fusion-specific models for thermo-mechanics. This talk will discuss initial development activities to build these capabilities in MOOSE, focusing on initial validation and benchmarking activities. Proposed coupling workflows and future work to support the simulation of fusion magnets and magnet structural assemblies for performance and safety evaluation in MOOSE will also be discussed.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2005

Transformational Spaceport and Range Capabilities Roadmap Interim Review to National Research Council External Review Panel

Contents include the following: Overview/Introduction. Roadmap Approach/Considerations. Roadmap Timeline/Spirals. Requirements Development. Spaceport/Range Capabilities. Mixed Range Architecture. User Requirements/Customer Considerations. Manifest Considerations. Emerging Launch User Requirements. Capability Breakdown Structure/Assessment. Roadmap Team Observations. Transformational Range Test Concept. Roadmap Team Conclusions. Next Steps.

Poniatowski, Karen↗
NASA NTRSDate not supplied

Development of Optical Step Height Measurement Capability for the BOLT Flight Vehicle

This paper presents details on the development of testing procedures to evaluate two different optical step height sensors that were intended for use on the first and second Boundary Layer Transition (BOLT and BOLT II) flight vehicle as well as other flight vehicles. The accurate and precise measurement of step height at the interface of different sections of a flight vehicle is important, as small changes in the step height (in some instances < 10 microns) at such locations can have a significant influence on the development of a boundary layer over the outer surface of the vehicle, which in turn can significantly impact aeroheating (among other things). In this paper, testing procedures have been developed, and test hardware assembled, to determine the capabilities of two optical step height sensor candidates. The first candidate is a miniaturized camera sensor that would be embedded into the body of a flight vehicle and would image the interface between two sections of that vehicle. The second candidate is a small fiber-based optical sensor that would also be embedded into the body of the flight vehicle, but projects light onto the interface between two sections of the flight vehicle, and then monitors any reflected/scattered light from that interface. Preliminary data from these two sensor candidates are presented, and a discussion of improvements that will be made in the testing procedures and to the test hardware is provided.

Brett F Bathel↗
DOE OSTI2021

Foreword: Selected papers from the 2020 Nuclear and Emerging Technologies for Space Topical Meeting (NETS 2020)

Humanity’s curiosity of and intrigue for exploring space has been with our species since we first looked up into the night sky. This age-old curiosity has driven humankind to innovate technologies for millennia, including efforts ranging from the construction of Stonehenge to track the annual movements of the sun to the investigation of advanced propulsion systems capable of transporting people to distant planets. Today’s technical communities dedicated to researching and developing innovative technologies for space exploration have seen a recent reinvigoration. Over the past few years, impressive progress made by industry, with exceptional support from government agencies, to reestablish and develop new capabilities has renewed confidence in humanity’s ability to reach the stars—a confidence that has not been present since the days of the Apollo program. Moreover, history shows that innovation and collaboration within the scientific and engineering communities reaches unparalleled pinnacles during periods of astrophilia. Finally, given the advancements in computational capacities for advanced modeling and simulation, unprecedented breakthroughs in commercializing advanced manufacturing techniques, and powerful collaborative relationships between industry and national scientific organizations, today we are limited only by our own imaginations.

99 GENERAL AND MISCELLANEOUS↗