Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “balance function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Infrared radiation parameterizations for the minor CO2 bands and for several CFC bands in the window region

Fast and accurate parameterizations have been developed for the transmission functions of the CO2 9.4- and 10.4-micron bands, as well as the CFC-11, CFC-12, and CFC-22 bands located in the 8-12-micron region. The parameterizations are based on line-by-line calculations of transmission functions for the CO2 bands and on high spectral resolution laboratory measurements of the absorption coefficients for the CFC bands. Also developed are the parameterizations for the H2O transmission functions for the corresponding spectral bands. Compared to the high-resolution calculations, fluxes at the tropopause computed with the parameterizations are accurate to within 10 percent when overlapping of gas absorptions within a band is taken into account. For individual gas absorption, the accuracy is of order 0-2 percent. The climatic effects of these trace gases have been studied using a zonally averaged multilayer energy balance model, which includes seasonal cycles and a simplified deep ocean. With the trace gas abundances taken to follow the Intergovernmental Panel on Climate Change Low Emissions 'B' scenario, the transient response of the surface temperature is simulated for the period 1900-2060.

Kratz, David P.↗

Observational Tests of Recent MHD Turbulence Perspectives

This grant seeks to analyze the Heliospheric Missions data to test current theories on the angular dependence (with respect to mean magnetic field direction) of magnetohydrodynamic (MHD) turbulence in the solar wind. Solar wind turbulence may be composed of two or more dynamically independent components. Such components include magnetic pressure-balanced structures, velocity shears, quasi-2D turbulence, and slab (Alfven) waves. We use a method, developed during the first two years of this grant, for extracting the individual reduced spectra of up to three separate turbulence components from a single spacecraft time series. The method has been used on ISEE-3 data, Pioneer Venus Orbiter, Ulysses, and Voyager data samples. The correlation of fluctuations as a function of angle between flow direction and magnetic-field direction is the focus of study during the third year.

Ghosh, Sanjoy↗

The Role of Mesoscale Variability on Plankton Dynamics in the North Atlantic

The intensive field observational phase of JGOFS in the North Atlantic Ocean has shown the importance of oceanic mesoscale variability on biogeochemical cycles and on the strength of the ocean biological pump. Mesoscale physical dynamics govern the major time/space scales of bulk biological variability (biomass, production, and export). Mesoscale eddies seem to have a strong impact on the ecosystem structure and functioning, but observational evidence is rather limited. For the signature of the mesoscale features to exist in the ecosystem, the comparison of temporal scales of formation and evolution of mesoscale features and reaction of the ecosystem is a key factor. Biological patterns are driven by active changes in biological source and sink terms rather than simply by passive turbulent mixing. A first modelling assessment of the regional balances between horizontal and vertical eddy-induced nutrient supplies in the euphotic zone shows that the horizontal transport predominates over the vertical route in the subtropical gyre, whereas the reverse holds true for the other biogeochemical provinces of the North Atlantic. Presently, despite some difference in numbers, the net impact of modelled eddies yields an enhancement of the biological productivity in most provinces of the North Atlantic Ocean. Key issues remaining include variation on the mesoscale of subsurface particle and dissolved organic matter remineralization, improved knowledge of the ecological response to patterns of variability, synopticity in mesoscale surveys along with refining measures of biogeochemical time/space variability. Eventual success of assimilation of in situ and satellite data, still in its infancy in coupled physical/biogeochemical models, will be crucial to achieve JGOFS synthesis in answering which data are most informative, standing stocks or rates, and which ones are relevant. Depending on which end of the spectrum quantification of the effect of mesoscale features on production and community structure is required, complementary strategies are offered. Either one may choose to increase resolution of models up to the very fine mesoscale features scale (a few kms) for the high end, or to include a parametric representation of eddies for the low end.

Garcon, Veronique C.↗

The Role of Mesoscale Variability on Plankton Dynamics in the North Atlantic

The intensive field observational phase of JGOFS in the North Atlantic Ocean has shown the importance of oceanic mesoscale variability on biogeochemical cycles and on the strength of the ocean biological pump. Mesoscale physical dynamics govern the major time/space scales of bulk biological variability (biomass, production and export). Mesoscale eddies seem to have a strong impact on the ecosystem structure and functioning, but observational evidence is rather limited. For the signature of the mesoscale features to exist in the ecosystem, the comparison of temporal scales of formation and evolution of mesoscale features and reaction of the ecosystem is a key factor. Biological patterns are driven by active changes in biological source and sink terms rather than simply by passive turbulent mixing. A first modelling assessment of the regional balances between horizontal and vertical eddy-induced nutrient supplies in the euphotic zone shows that the horizontal transport predominates over the vertical route in the subtropical gyre, whereas the reverse holds true for the other biogeochemical provinces of the North Atlantic. Presently. despite some difference in numbers, the net impact of modelled eddies yields an enhancement of the biological productivity in most provinces of the North Atlantic Ocean. Key issues remaining include variation on the mesoscale of subsurface particle and dissolved organic matter remineralization, improved knowledge of the ecological response to patterns of variability, synopticity in mesoscale surveys along with refining measures of biogeochemical time/space variability. Eventual success of assimilation of in situ and satellite data, still in its infancy in coupled physical/biogeochemical models, will be crucial to achieve JGOFS synthesis in answering which data are most informative, standing stocks or rates, and which ones are relevant. Depending on which end of the spectrum quantification of the effect of mesoscale features on production and community structure is required, complementary strategies are offered. Either one may choose to increase resolution of models up to the very fine mesoscale features scale (a few kms) for the high end, or to include a parametric representation of eddies for the low end.

Garcon, Veronique, C.↗

Energy balance in solar and stellar chromospheres

Net radiative cooling rates for quiet and active regions of the solar chromosphere and for two stellar chromospheres are calculated from corresponding atmospheric models. Models of chromospheric temperature and microvelocity distributions are derived from observed spectra of a dark point within a cell, the average sun and a very bright network element on the quiet sun, a solar plage and flare, and the stars Alpha Boo and Lambda And. Net radiative cooling rates due to the transitions of various atoms and ions are then calculated from the models as a function of depth. Large values of the net radiative cooling rate are found at the base of the chromosphere-corona transition region which are due primarily to Lyman alpha emission, and a temperature plateau is obtained in the transition region itself. In the chromospheric regions, the calculated cooling rate is equal to the mechanical energy input as a function of height and thus provides a direct constraint on theories of chromospheric heating.

Avrett, E. H.↗

Spaceborne lidar system for measurements of atmospheric water vapor and aerosols

The inclusion of a differential absorption lidar (DIAL) system as part of the NASA Earth Observing System (EOS) is proposed. Functioning at 720 nm, the DIAL could provide atmospheric water vapor profiles in the troposphere and stratosphere, and provide data for characterizing the physical properties of clouds. The use of frequency doubling of the laser could also open a window on the 355 nm region, and thereby molecular density and temperature profiles. The date would be of use in studies of the global hydrological cycle, the global radiation balance, climate, meteorology, and atmospheric structure and transport phenomena.

Browell, E. V.↗

Maintaining the program balance, volumes 1 and 2

In March of 1990, the NASA Administrator asked the Academy to perform a study to address the following questions: (1) has NASA contracted too much of its technical work; (2) has NASA's in-house technical capability eroded over time; (3) is in-house engineering and scientific work important to the development of scientists and engineers; and (4) is NASA still able to attract quality scientists and engineers. A panel from the Academy addressed each question separately and came up with the following recommendations: (1) prepare and issue guidance on technical functional areas reserved for in-house performance; (2) convert contracted technical functions to in-house performance if critical to agency programs; (3) provide policy guidance to the centers to retain in-house projects; (4) examine the project mix at each center against agency goals and objectives; (5) institute an annual critical review for all technical disciplines; (6) modify the agency's contractor accountability process; and (7) seek opportunities for greater delegation of resources and technical decision making.

Finger, Harold↗

Exit Presentation -- Maintaining Balance

This slide presentation reviews the projects which the author engaged in during an internship at Johnson Space Center. Project 1 was involved with Stochastic Resonance (SR). Stochastic resonance is a phenomenon in which the response of a non-linear system to a weak input signal is optimized by the presence of a particular non-zero level of noise. The goal of this project was to develop a countermeasure for sensorimotor disturbances that are experienced after long duration space flight. The second project was a pilot study that was to examine how adaptation to a novel functional task was affected by postural disturbance.

Heap, Erin↗

Space shuttle: A comparison of wind tunnel facility data on the 040A space shuttle orbiter configuration

A series of comparisons made on the longitudinal and lateral directional stability and control characteristics of the baseline 040A space shuttle orbiter configuration is documented. The data used for the comparisons were obtained from five wind tunnel tests conducted in four different wind tunnel facilities. The media for comparison were the aerodynamic slope values plotted as a function of Mach number for the different facilities. The slopes were computed using the SADSAC system and have been reduced relative to a common reference system. Data used for the comparison were selected based on a common baseline configuration. Identical configurations were available in all cases except MSFC 551 where an off-baseline vertical tail was tested. Some of the factors considered in comparing the various data were balance operating ranges and sensitivities, Reynolds number differences, scaling effects and control deflection accuracies.

Gyorfi, R. A.↗

Effect of noisy phase reference on coherent detection of unbalanced QPSK signals

A phase error in the reference signal used in coherent detection of PSK signals causes a degradation in performance; this effect on bit error probability has been much discussed in the literature for BPSK and balanced QPSK systems. For unbalanced QPSK (UQPSK) systems, where the power and data rates in the two channels are unequal, and where the channel data symbols might also be different, the problem of computing the error probability is more complex, and only approximate solutions have been previously given. In this paper, exact expressions are derived for the conditional probability of error for the I and Q channels as a function of the channel power and data rate ratio. This is done for all combinations of Manchester and NRZ signalling schemes, and it is shown that in some cases the low data rate channel can be more seriously affected by a phase offset. Numerical results are also given for the average probability of error, assuming a biphase Costas loop is used for carrier synchronization.

Osborne, H. C.↗

The NATO III 5 MHz Distribution System

A high performance 5 MHz distribution system is described which has extremely low phase noise and jitter characteristics and provides multiple buffered outputs. The system is completely redundant with automatic switchover and is self-testing. Since the 5 MHz reference signals distributed by the NATO III distribution system are used for up-conversion and multiplicative functions, a high degree of phase stability and isolation between outputs is necessary. Unique circuit design and packaging concepts insure that the isolation between outputs is sufficient to quarantee a phase perturbation of less than 0.0016 deg when other outputs are open circuited, short circuited or terminated in 50 ohms. Circuit design techniques include high isolation cascode amplifiers. Negative feedback stabilizes system gain and minimizes circuit phase noise contributions. Balanced lines, in lieu of single ended coaxial transmission media, minimize pickup.

Vulcan, A.↗

Mapping a battlefield simulation onto message-passing parallel architectures

Perhaps the most critical problem in distributed simulation is that of mapping: without an effective mapping of workload to processors the speedup potential of parallel processing cannot be realized. Mapping a simulation onto a message-passing architecture is especially difficult when the computational workload dynamically changes as a function of time and space; this is exactly the situation faced by battlefield simulations. This paper studies an approach where the simulated battlefield domain is first partitioned into many regions of equal size; typically there are more regions than processors. The regions are then assigned to processors; a processor is responsible for performing all simulation activity associated with the regions. The assignment algorithm is quite simple and attempts to balance load by exploiting locality of workload intensity. The performance of this technique is studied on a simple battlefield simulation implemented on the Flex/32 multiprocessor. Measurements show that the proposed method achieves reasonable processor efficiencies. Furthermore, the method shows promise for use in dynamic remapping of the simulation.

Nicol, David M.↗

A GIS approach to urban heat island research: The case of Huntsville, Alabama

The urban heat island represents a case of inadvertent human modification of climate in an urban environment. Urbanization changes the nature of the surface and atmospheric properties of a region. As a result, radiation balance in the urban areas is altered and sensible heat is added to the point that urban areas are warmer than surrounding rural areas. At the boundary between the rural and urban area, a sharp rise in temperature occurs, culminating to a peak temperature at the central business district of the city, hence the name 'urban heat island'. The extent and intensity of the urban heat island are a function of population size, land use, and topography. Because the urban heat island exhibits spatial variations of temperatures, the use of Geographic Information System (GIS) is appropriate. The research on the urban heat island focuses on the acquisition of 15 bands of visible and thermal infrared data (ranging from 0.45 to 12.2 microns) from an aerial platform using NASA's ATLAS (Airborne Thermal/Visible Land Application Sensor) over Huntsville, Alabama. The research reported in this paper is an analysis of the impact of population, land use, and topography on the shape of the urban heat island that could be developed in Huntsville using the GIS approach. The outcome of this analysis can then be verified using the acquired remotely sensed data.

Lo, Chor Pong↗

Results of thermal vacuum tests for the PASP Plus flight panels

The PASP+ experiment is collection of 16 individual cell strings on 12 different photovoltaic modules, representing a wide variety of cell and array technologies, which will be launched from a Pegasus in early 1993. The main objectives of the experiment are to obtain environmental interaction data between the modules and the space plasma; and to obtain radiation damage data on the newer types of cells. The orbit will be about 1050 nautical miles by 190 nautical miles with an inclination of 70 degrees. During late June and early July of this year, we took the PASP+ panels with all 12 modules and the flight controller to Boeing for a series of thermal vacuum tests. The main objectives of these tests were to verify the thermal balance model of the space experiment; to obtain good data for temperature coefficients of the various modules; and to have an 'end-to-end' test of the modules and controller. We will present data on the module temperatures and the measured temperature coefficients. We shall discuss the limitations of the test setup and some of the assumptions that were made. We shall also present some module performance as a function of temperature.

Guidice, Don↗

Electron-cytochemical study of Ca2+ in cotyledon cells of soybean seedlings grown in microgravity

Microgravity and horizontal clinorotation are known to cause the rearrangement of the structural-functional organization of plant cells, leading to accelerated aging. Altered gravity conditions resulted in an increase in the droplets volume in cells and the destruction of chloroplast structure in Arabidopsis thaliana plants, an enhancement of cytosolic autophagaous processes, an increase in the respiration rate and a greater number of multimolecular forms of succinate- and malate dehydrogenases in cells of the Funaria hygrometrica protonema and Chlorella vulgaris, and changes in calcium balance of cells. Because ethylene is known to be involved in cell aging and microgravity appears to speed the process, and because soybean seedlings grown in space produce higher ethylene levels we asked: 1) does an acceleration of soybean cotyledon cell development and aging occur in microgravity? 2) what roles do Ca2+ ions and the enhanced ethylene level play in these events? Therefore, the goal of our investigation was to examine of the interaction of microgravity and ethylene on the localization of Ca2+ in cotyledon mesophyll of soybean seedlings.

Flight Experiment↗

Pattern Identification - A Foundation for Research in the Emphasis of Design Patterns in Systems Engineering and Knowledge Capture

Pattern Language describes the morphology and functionality of a system in the absence of design particulars. Harnessing this capability will provide the Systems Engineering discipline a means of managing the development of increasingly complex systems with increasingly distributed design teams while capturing and retaining knowledge for future generations. Pattern Language is a syntax for describing, and structurally relating, design patterns. Design patterns contextually describe the application of domain knowledge in the engineered solution to the force balance problem. The parallels between pattern recognition and application, as a fundamental stage of human learning, and pattern observation within a complex system, suggests pattern language may be a valuable tool in the capture and dissemination of knowledge. Pattern application has enjoyed considerable study over the last several decades, however much of this work has focused on the replication of design particulars. This work returns to the roots of Pattern Language and explores the utility of patterns as an architectural description and guide, and knowledge capture method, for complex system development beginning with the identification of a time proven design pattern.

Russell, Samuel P.↗

Visual display and alarm system for wind tunnel static and dynamic loads

A wind tunnel balance monitor and alarm system developed at NASA Ames Research Center will produce several beneficial results. The costs of wind tunnel delays because of inadvertent balance damage and the costs of balance repair or replacement can be greatly reduced or eliminated with better real-time information on the balance static and dynamic loading. The wind tunnel itself will have enhanced utility with the elimination of overly cautious limits on test conditions. The microprocessor-based system features automatic scaling and 16 multicolored LED bargraphs to indicate both static and dynamic components of the signals from eight individual channels. Five individually programmable alarm levels are available with relay closures for internal or external visual and audible warning devices and other functions such as automatic activation of external recording devices, model positioning mechanisms, or tunnel shutdown.

Hanly, Richard D.↗

New acousto-ultrasonic techniques applied to aerospace materials

The use of an NdYAG pulsed laser for generating ultrasonic waves for NDE in resin matrix composites was investigated. A study was conducted of the use of the 1.064 micron wavelength NdYAG pulsed laser with the neat, unreinforced resin as well as graphite fiber/polymer composite specimens. In the case of the neat resins it was found that, at normal incidence, about 25 percent of the laser pulse energy was reflected at the incident surface. An attenuation coefficient for the polyimide resin, PMR-15 was determined to be approximately 5.8 np/cm. It was found in energy balance studies that graphite fiber/polymer specimens attenuate the laser beam more than do neat resins. The increase absorption is in the graphite fibers. The occurrence of laser induced surface damage was also studied. For the polymer neat resin, damage appears as pit formation over a small fraction of the pulse impact area and discoloration over a larger part of the area. A damage threshold was inferred from observed damage as a function of pulse energy. The 600 F cured PMR-15 and PMR-11 exhibit about the same amount of damage for a given laser pulse energy. The damage threshold is between 0.06 and 0.07 J/sq cm.

Kautz, Harold E.↗