Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Roles of bandgrading, lifetime, band alignment, and carrier concentration in high-efficiency CdSeTe solar cells

CdSeTe alloying has significantly increased the efficiency of CdTe-based solar technology. Here, computational modeling compares how different CdSeTe bandgrading, carrier lifetimes, band alignment, and carrier concentrations contribute to transport, recombination, and performance. We find that the gain in photocurrent caused by bandgap narrowing alone is insufficient to describe experimental efficiency gains. Performance can be increased by adjusting CdSeTe compositions and bandgrading depths. However, these performance gains are small relative to the contributions of enhanced lifetime by Se alloying, which can explain record cell efficiency gains with minimal open-circuit voltage loss despite significant bandgap narrowing. Similarly, CdSeTe band alignment shifts can significantly increase performance if front interface recombination is prevalent. For a wide range of CdSeTe grading profiles, the hole density is a critical component to achieve efficiencies exceeding 25%.

36 MATERIALS SCIENCE↗

Pressure–strain interaction. II. Decomposition in magnetic field-aligned coordinates

In weakly collisional and collisionless magnetized plasmas, the pressure–strain interaction describes the rate of conversion between bulk flow and thermal energy density. In this study, we derive an analytical expression for the pressure–strain interaction in a coordinate system with an axis aligned with the local magnetic field. The result is eight groups of terms corresponding to different physical mechanisms that can contribute to the pressure–strain interaction. We provide a physical description of each term. Here, the results are immediately of interest to weakly collisional and collisionless magnetized plasmas and the fundamental processes that happen therein, including magnetic reconnection, magnetized plasma turbulence, and collisionless shocks. The terms in the field-aligned coordinate decomposition are likely accessible to measurement with satellite observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dangling bonds, the charge neutrality level, and band alignment in semiconductors

We present a systematic study of the electronic properties of dangling bonds (DBs) in a variety of semiconductors and examine the relationship between DBs and the charge neutrality level (CNL) in the context of band alignments of semiconductors. We use first-principles calculations based on density functional theory to assess the energetics of DBs in a set of diamond-structure group-IV and III–V or II–VI zinc-blende-structure semiconductors, considering both cation and anion-derived states. We examine the charge-state transition levels of DBs to assess whether they can serve as a CNL to align band structures, by comparing with offsets calculated from interface calculations. Our results show that this approach for evaluating the CNL yields quantitative results for band offsets and provides useful insights. We discuss the relation with alternative approaches for determination of CNLs based on branch-point energies or transition levels of interstitial hydrogen.

36 MATERIALS SCIENCE↗

Electric fields imbue enzyme reactivity by aligning active site fragment orbitals

It is broadly recognized that intramolecular electric fields, produced by the protein scaffold and acting on the active site, facilitate enzymatic catalysis. This field effect can be described by several theoretical models, each of which is intuitive to varying degrees. In this contribution, we show that a fundamental effect of electric fields is to generate electrostatic potentials that facilitate the energetic alignment of reactant frontier orbitals. We apply this model to demystify the impact of electric fields on high-valent iron–oxo heme proteins: catalases, peroxidases, and peroxygenases/monooxygenases. Specifically, we show that this model easily accounts for the observed field-induced changes to the spin distribution within peroxidase active sites and explains the transition between epoxidation and hydroxylation pathways seen in Cytochrome P450 active site models. Thus, for the intuitive interpretation of the chemical effect of the field, the strategy involves analyzing the response of the orbitals of active site fragments, and their energetic alignment. We note that the energy difference between fragment orbitals involved in charge redistribution acts as a measure for the chemical hardness/softness of the reactive complex. This measure, and its sensitivity to electric fields, offers a single parameter model from which to quantitatively assess the effects of electric fields on reactivity and selectivity. Thus, the model provides an additional perspective to describe electrostatic preorganization and offers ways for its manipulation.

59 BASIC BIOLOGICAL SCIENCES↗

ARECIBO MULTI-FREQUENCY TIME-ALIGNED PULSAR AVERAGE-PROFILE AND POLARIZATION DATABASE

We present Arecibo time-aligned, total intensity profiles for 46 pulsars over an unusually wide range of radio frequencies and multi-frequency, polarization-angle density diagrams, and/or polarization profiles for 57 pulsars at some or all of the frequencies 50, 111/130, 430, and 1400 MHz. The frequency-dependent dispersion delay has been removed in order to align the profiles for study of their spectral evolution, and wherever possible the profiles of each pulsar are displayed on the same longitude scale. Most of the pulsars within Arecibo's declination range that are sufficiently bright for such spectral or single pulse analysis are included in this survey. The calibrated single pulse sequences and average profiles are available by web download for further study.

79 ASTRONOMY AND ASTROPHYSICS↗

PROTON HEATING BY NONLINEAR FIELD-ALIGNED ALFVEN WAVES IN SOLAR CORONAL HOLES

Field-aligned Alfven waves are often viewed as a source of the proton heating that accelerates the fast solar wind. However, the energy that they can inject into the protons in the limit of cyclotron-resonant quasi-linear diffusion is insufficient to account for the observed acceleration. To test the validity of this limit in coronal holes, nonlinear Alfven waves are modeled using a hybrid code. It is found that the nonlinearity is particularly strong when the intensity of antisunward-propagating waves is comparable to that of sunward waves. The sunward waves can be generated by the proton distribution as it evolves with the heliocentric distance. The ponderomotive force and beat interaction are identified as the most important nonlinear effects. The nonlinearity of the field-aligned Alfven waves produces density fluctuations. In the simulations, the amplitude of the density fluctuations was kept within the observed constraints from the interplanetary scintillation measurements in the corona. In this case, the characteristic time of the proton heating is almost 2 orders of magnitude smaller than the solar wind expansion time. Therefore, it can contribute to the energization of the solar wind on the global scale. The nonlinear wave damping operating alone cannot be responsible for the energization because it only causes particle diffusion parallel to the magnetic field. However, it can relax the limitation on the perpendicular diffusion imposed by the cyclotron resonance condition. The nonlinear damping combined with the linear one can then inject the additional thermal energy needed to accelerate the solar wind.

99 GENERAL AND MISCELLANEOUS↗

RADIATIVE TORQUES ALIGNMENT IN THE PRESENCE OF PINWHEEL TORQUES

We study the alignment of grains subject to both radiative torques and pinwheel torques while accounting for thermal flipping of grains. By pinwheel torques we refer to all systematic torques that are fixed in grain body axes, including the radiative torques arising from scattering and absorption of isotropic radiation. We discuss new types of pinwheel torques, which are systematic torques arising from infrared emission and torques arising from the interaction of grains with ions and electrons in hot plasma. We show that both types of torques are long-lived, i.e., may exist longer than gaseous damping time. We compare these torques with the torques introduced by E. Purcell, namely, torques due to H{sub 2} formation, the variation of accommodation coefficient for gaseous collisions and photoelectric emission. Furthermore, we revise the Lazarian and Draine model for grain thermal flipping. We calculate mean flipping timescale induced by Barnett and nuclear relaxation for both paramagnetic and superparamagnetic grains, in the presence of stochastic torques associated with pinwheel torques, e.g., the stochastic torques arising from H{sub 2} formation, and gas bombardment. We show that the combined effect of internal relaxation and stochastic torques can result in fast flipping for sufficiently small grains and, because of this, they get thermally trapped, i.e., rotate thermally in spite of the presence of pinwheel torques. For sufficiently large grains, we show that the pinwheel torques can increase the degree of grain alignment achievable with the radiative torques by increasing the magnitude of the angular momentum of low attractor points and/or by driving grains to new high attractor points.

99 GENERAL AND MISCELLANEOUS↗

EXOPLANETARY SPIN-ORBIT ALIGNMENT: RESULTS FROM THE ENSEMBLE OF ROSSITER-MCLAUGHLIN OBSERVATIONS

One possible diagnostic of planet formation, orbital migration, and tidal evolution is the angle {psi} between a planet's orbital axis and the spin axis of its parent star. In general, {psi} cannot be measured, but for transiting planets one can measure the angle {lambda} between the sky projections of the two axes via the Rossiter-McLaughlin effect. Here, we show how to combine measurements of {lambda} in different systems to derive statistical constraints on {psi}. We apply the method to 11 published measurements of {lambda}, using two different single-parameter distributions to describe the ensemble. First, assuming a Rayleigh distribution (or more precisely, a Fisher distribution on a sphere), we find that the peak value is less than 22{sup 0} with 95% confidence. Second, assuming that a fraction f of the orbits have random orientations relative to the stars, and the remaining fraction (1 - f) are perfectly aligned, we find f < 0.36 with 95% confidence. This latter model fits the data better than the Rayleigh distribution, mainly because the XO-3 system was found to be strongly misaligned while the other 10 systems are consistent with perfect alignment. If the XO-3 result proves robust, then our results may be interpreted as evidence for two distinct modes of planet migration.

79 ASTRONOMY AND ASTROPHYSICS↗

PHASE CORRELATION METHOD FOR THE ALIGNMENT OF TOTAL SOLAR ECLIPSE IMAGES

A modified phase correlation method, based on Fourier transform, which enables the alignment of solar coronal images taken during the total solar eclipses, is presented. The method enables the measurement of translation, rotation, and scaling factor between two images. With the application of this technique, pairs of images with different exposure times, different brightness scale, such as linear for CCD and nonlinear for images taken with photographic film, and even images from different emission lines can be aligned with sub-pixel precision.

79 ASTRONOMY AND ASTROPHYSICS↗

MODELING THE JET KINEMATICS OF THE BLACK HOLE MICROQUASAR XTE J1550-564: A CONSTRAINT ON SPIN-ORBIT ALIGNMENT

Measurements of black hole spin made using the continuum-fitting method rely on the assumption that the inclination of the black hole's spin axis to our line of sight is the same as the orbital inclination angle i of the host binary system. The X-ray and radio jet data available for the microquasar XTE J1550-564 offer a rare opportunity to test this assumption. Following the work of others, we have modeled these data and thereby determined the inclination angle {theta} of the jet axis, which is presumed to be aligned with the black hole's spin axis. We find {theta} Almost-Equal-To 71 Degree-Sign and place an upper limit on the difference between the spin and orbital inclinations of |{theta} - i| < 12 Degree-Sign (90% confidence). Our measurement tests for misalignment along the line of sight while providing no constraint perpendicular to this plane. Our constraint on the misalignment angle supports the prediction that the spinning black hole in XTE J1550-564 has aligned itself with the orbital plane and provides support for the measurement of its spin via the continuum-fitting method. Our conclusions are based on a simple and reasonable model of a pair of symmetric jets propagating into a low-density cavity whose western wall is Almost-Equal-To 20% closer to XTE J1550-564 than its eastern wall.

79 ASTRONOMY AND ASTROPHYSICS↗

No evidence for Bardeen-Petterson alignment in GRMHD simulations and semi-analytic models of moderately thin, prograde, tilted accretion disks

In this paper, we introduce the first results that use data extracted directly from numerical simulations as inputs to the analytic twisted disk model of Zhuravlev and Ivanov. In both numerical and analytic approaches, fully relativistic models of tilted and twisted disks having a moderate effective viscosity around a slowly rotating Kerr black hole are considered. Qualitatively, the analytic model demonstrates the same dynamics as the simulations, although with some quantitative offset. Namely, the general relativistic magnetohydrodynamic simulations typically give smaller variations of tilt and twist across the disk. When the black hole and the disk rotate in the same direction, the simulated tilted disk and analytic model show no sign of Bardeen-Petterson alignment, even in the innermost parts of the disk where the characteristic time for relaxation to a quasi-stationary configuration is of the same order as the computation time. In the opposite case, when the direction of the disk's rotation is opposite to that of the black hole, a partial alignment is observed, in agreement with previous theoretical estimates. Thus, both fully numerical and analytic schemes demonstrate that the Bardeen-Petterson effect may not be possible for the case of prograde rotation provided that disk's effective viscosity is sufficiently small. This may have implications in modeling of different astrophysical phenomena such as disk spectra and jet orientation.

79 ASTRONOMY AND ASTROPHYSICS↗

FORMATION AND ALIGNMENT OF ELONGATED, FRACTAL-LIKE WATER-ICE GRAINS IN EXTREMELY COLD, WEAKLY IONIZED PLASMA

Elongated, fractal-like water-ice grains are observed to form spontaneously when water vapor is injected into a weakly ionized laboratory plasma formed in a background gas cooled to an astrophysically relevant temperature. The water-ice grains form in 1–2 minutes, levitate with regular spacing, and are aligned parallel to the sheath electric field. Water-ice grains formed in plasma where the neutrals and ions have low mass, such as hydrogen and helium, are larger, more elongated, and more fractal-like than water-ice grains formed in plasmas where the neutrals and ions have high mass such as argon and krypton. Typical aspect ratios (length to width ratio) are as great as 5 while typical fractal dimensions are ∼1.7. Water-ice grain lengths in plasmas with low neutral and ion masses can be several hundred microns long. Infrared absorption spectroscopy reveals that the water-ice grains are crystalline and so are similar in constitution to the water-ice grains in protoplanetary disks, Saturn’s rings, and mesospheric clouds. The properties and behavior of these laboratory water-ice grains may provide insights into morphology and alignment behavior of water-ice grains in astrophysical dusty plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Intermittency and alignment in strong RMHD turbulence

We develop an analytic model of intermittent, three-dimensional, strong, reduced magnetohydrodynamic (RMHD) turbulence with zero cross helicity. We take the fluctuation amplitudes to have a log-Poisson distribution and incorporate into the model a new phenomenology of scale-dependent dynamic alignment between the Elsässer variables z{sup ±}. We find that the structure function 〈|Δz{sub λ}{sup ±}|{sup n}〉 scales as λ{sup 1−β{sup n}}, where Δz{sub λ}{sup ±} is the variation in z{sup ±} across a distance λ perpendicular to the magnetic field. We calculate the value of β to be ≃ 0.69 based on our assumption that the most intense coherent structures are two-dimensional with a volume filling factor ∝ λ. Two consequences of this structure-function scaling are that the total-energy power spectrum is ∝ k{sub ⊥}{sup −1.52} and the kurtosis of the fluctuations is ∝ λ{sup −0.27}. Our model resolves the problem that alignment angles defined in different ways exhibit different scalings. Specifically, we find that the energy-weighted average angle between the velocity and magnetic-field fluctuations is ∝ λ{sup 0.21}, the energy-weighted average angle between Δz{sup +} and Δz{sup −} is ∝ λ{sup 0.10}, and the average angle between Δz{sup +} and Δz{sup −} without energy weighting is ∝ [ln(L/λ)]{sup −1/2} when L/λ≫1, where L is the outer scale. We also carry out a direct numerical simulation of RMHD turbulence. The scalings in our model are similar to the scalings in this simulation as well as the structure-function scalings observed in the slow solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Chemical Solution Derived Planarization Layers for Highly Aligned IBAD MgO Templates

The main goal of this research is to develop a chemical solution derived planarization layer to fabricate highly aligned IBAD-MgO templates for the development of high temperature superconductor (HTS) based coated conductors. The standard IBAD-MgO template needs an additional electrochemical polishing step of the mechanically polished 50- m-thick Hastelloy C-276 substrates to ensure a flat and smooth surface for subsequent growth of multi-layer buffer architectures, which include: sputtered 80-nm Al2O3; sputtered 7-nm Y2O3; IBAD 10-nm MgO; sputtered 30-nm homo-epi MgO; and sputtered 30-nm LaMnO3 (LMO) layers. We have successfully developed a solution planarization layer that removes the electrochemical polishing step and also acts as a barrier layer. Crack-free, smooth Al2O3 layers were prepared on mechanically polished Hastelloy substrates using a chemical solution process. A nearly 10-15-nm thick Al2O3 layer was formed with each coating and the coating was repeated several times to achieve the desired film thickness with intermediate heat-treatments after each coating. The Al2O3 planarization layer significantly reduced the surface roughness of the substrate. The average surface roughness value, Ra for a starting substrate was 9-10 nm. After 8 coatings of Al2O3 layer, the Ra was reduced to 2 nm. Highly aligned IBAD-MgO layers with out-of-plane and in-plane textures comparable to the standard IBAD-MgO layers were successfully deposited on top of the solution planarization Al2O3 layers with an Y2O3 nucleation layer using a reel-to-reel ion-beam sputtering system. Both homo-epi MgO and LMO layers were subsequently deposited on the IBAD-MgO layers using rf sputtering to complete the buffer stack required for the growth of HTS films. YBa2Cu3O7- (YBCO) films with a thickness of 0.8 m deposited on these IBAD-MgO templates by pulsed laser deposition showed a high self-field critical current density, Jc of 3.04 MA/cm2 at 77 K and 6.05 MA/cm2 at 65 K. These results demonstrate that a low-cost chemical-solution-based, high-throughput Al2O3 planarization layer can remove the electro-polishing step and replace sputtered Al2O3 layers for the production of high Jc YBCO-coated conductors.

Paranthaman, Mariappan Parans↗

Aligning thermal and current quenches with a high density low-Z injection

The conventional approach for thermal quench (TQ) mitigation in a tokamak disruption is through a high- Z impurity injection that radiates away the plasma’s thermal energy before it reaches the wall. The downside is a robust Ohmic-to-runaway current conversion due to the radiatively clamped low post-thermal-quench electron temperature. An alternative approach is to deploy a low- Z (either deuterium or hydrogen) injection that aims to slow down the TQ, and ideally aligns it with the current quench (CQ). This approach has been investigated here via 3D MHD simulations using the PIXIE3D code. By boosting the hydrogen density, a fusion-grade plasma is dilutionally cooled at approximately the original pressure. Energy loss to the wall is controlled by a Bohm outflow condition at the boundary where the magnetic field intercepts a thin plasma sheath at the wall, in addition to Bremsstrahlung bulk losses. Robust MHD instabilities proceed as usual, while the collisionality of the plasma has been greatly increased and parallel transport is now in the Braginskii regime. The main conclusion of this study is that the decreased transport loss along open field lines due to a sufficient low- Z injection slows down the TQ rate to the order of 20 ms, aligned with the CQ timescale for a 15 MA ITER plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Web-based application for the collection, management and release of Alignment and Calibration configurations used in data processing at the Compact Muon Solenoid experiment

The Compact Muon Solenoid (CMS) experiment makes a vast use of alignment and calibration measurements in several data processing workflows: in the High Level Trigger, in the processing of the recorded collisions and in the production of simulated events for data analysis and studies of detector upgrades. A complete alignment and calibration scenario is factored in approximately three-hundred records, which are updated independently and can have a time-dependent content, to reflect the evolution of the detector and data taking conditions. Given the complexity of the CMS condition scenarios and the large number (50) of experts who actively measure and release calibration data, in 2015 a novel web-based service has been developed to structure and streamline their management. The cmsDbBrowser provides an intuitive and easily accessible entry point for the navigation of existing conditions by any CMS member, for the bookkeeping of record updates and for the actual composition of complete calibration scenarios. This paper describes the design, choice of technologies and the first year of usage in production of the cmsDbBrowser.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ultrafast infrared plasmon switching in aligned carbon-nanotube optical resonators

Reconfigurable plasmonic materials are crucial components in active photonic devices for optical communication, signal processing, and sensing applications. Certain candidates including transparent conducting oxides, small-bandgap semiconductors (i.e. Ge, InSb), and conducting polymers can exhibit switchable free carrier concentrations triggered by optical, electrical or thermal excitations. Here, we show that aligned films of single-walled carbon nanotubes (SWCNTs) can serve as all-optically tunable plasmonic material in the mid-infrared range, thereby adding them to the library of switchable plasmonic materials. Interband optical pumping with femtosecond laser pulses results in the photoexcitation of free charge carriers, which transiently blueshifts the plasmon resonances of patterned, periodic SWCNT nano-resonators spanning the mid-infrared spectral range from 1700 to 2700 cm -1 . Furthermore. the ultrafast plasmon modulation exhibits a nearly single-picosecond decay time, attributed to interband carrier relaxation and inter-tube charge transfer. Given that aligned films of SWCNTs have high thermal stability, excellent photostability, epsilon-near-zero property, and extremely large optical anisotropy, their dynamic tunability represents a promising pathway towards active optical devices in the technologically important mid-infrared range.

single-walled carbon nanotubes↗

CoverM: read alignment statistics for metagenomics

SUMMARY: Genome-centric analysis of metagenomic samples is a powerful method for understanding the function of microbial communities. Calculating read coverage is a central part of analysis, enabling differential coverage binning for recovery of genomes and estimation of microbial community composition. Coverage is determined by processing read alignments to reference sequences of either contigs or genomes. Per-reference coverage is typically calculated in an ad-hoc manner, with each software package providing its own implementation and specific definition of coverage. Here we present a unified software package CoverM which calculates several coverage statistics for contigs and genomes in an ergonomic and flexible manner. It uses "Mosdepth arrays" for computational efficiency and avoids unnecessary I/O overhead by calculating coverage statistics from streamed read alignment results. AVAILABILITY AND IMPLEMENTATION: CoverM is free software available at https://github.com/wwood/coverm. CoverM is implemented in Rust, with Python (https://github.com/apcamargo/pycoverm) and Julia (https://github.com/JuliaBinaryWrappers/CoverM_jll.jl) interfaces.

Aroney, Samuel T N↗