Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active state model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Gas Concentration Mapping of Arenal Volcano Using AVEMS

The Airborne Volcanic Emissions Mass Spectrometer (AVEMS) System developed by NASA-Kennedy Space Center and deployed in collaboration with the National Center for Advanced Technology (CENAT) and the University of Costa Rica was used for mapping the volcanic plume of Arenal Volcano, the most active volcano in Costa Rica. The measurements were conducted as part of the second CARTA (Costa Rica Airborne Research and Technology Application) mission conducted in March 2005. The CARTA 2005 mission, involving multiple sensors and agencies, consisted of three different planes collecting data over all of Costa Rica. The WB-57F from NASA collected ground data with a digital camera, an analog photogrametric camera (RC-30), a multispectral scanner (MASTER) and a hyperspectral sensor (HYMAP). The second aircraft, a King Air 200 from DoE, mounted with a LIDAR based instrument, targeted topography mapping and forest density measurements. A smaller third aircraft, a Navajo from Costa Rica, integrated with the AVEMS instrument and designed for real-time measurements of air pollutants from both natural and anthropogenic sources, was flown over the volcanoes. The improved AVEMS system is designed for deployment via aircraft, car or hand-transport. The 85 pound system employs a 200 Da quadrupole mass analyzer, has a volume of 92,000 cubic cm, requires 350 W of power at steady state, can operate up to an altitude of 41,000 feet above sea level (-65 C; 50 torr). The system uses on-board gas bottles on-site calibration and is capable of monitoring and quantifying up to 16 gases simultaneously. The in-situ gas data in this work, consisting of helium, carbon dioxide, sulfur dioxide and acetone, was acquired in conjunction of GPS data which was plotted with the ground imagery, topography and remote sensing data collected by the other instruments, allowing the 3 dimensional visualization of the volcanic plume at Arenal Volcano. The modeling of possible scenarios of Arenal s activity and its direct impact on the surrounding populated areas in now possible with the combined set of data, linking in-situ data with remote sensing data. The study also helps in the understanding of pyroclastic flow behavior in case of a major eruption.

Diaz, J. Andres↗
NASA NTRS1993

Current state of the mass storage system reference model

IEEE SSSWG was chartered in May 1990 to abstract the hardware and software components of existing and emerging storage systems and to define the software interfaces between these components. The immediate goal is the decomposition of a storage system into interoperable functional modules which vendors can offer as separate commercial products. The ultimate goal is to develop interoperable standards which define the software interfaces, and in the distributed case, the associated protocols to each of the architectural modules in the model. The topics are presented in viewgraph form and include the following: IEEE SSSWG organization; IEEE SSSWG subcommittees & chairs; IEEE standards activity board; layered view of the reference model; layered access to storage services; IEEE SSSWG emphasis; and features for MSSRM version 5.

Coyne, Robert↗
NASA NTRS1975

Time-controlled descent guidance in uncertain winds

A procedure has been developed for constructing a statistical model of the altitude-dependent mean wind profile from the historical record of wind measurements at particular locations. The model is constructed by fitting a Markov process, with altitude as the stage variable, to the historical wind data. The wind model, together with the aircraft dynamics and the error characteristics of the navigation system, are incorporated in the design of a state estimator, which gives the minimum variance estimate of the aircraft state and the wind vector. The state and wind estimates are used as inputs to a linear feedback law for guiding the aircraft along the nominal trajectory. An example design of a time-constrained (4D RNAV) descent guidance system is presented, showing tracking accuracy, control activity, and probability of arrival time with and without the wind estimator.

Menga, G.↗
NASA NTRS1996

Development of Semi-Span Model Test Techniques

A computational investigation was performed to support the development of a semi-span model test capability in the NASA Langley Research Center's National Transonic Facility. This capability is desirable for the testing of advanced subsonic transport aircraft at full-scale Reynolds numbers. A state-of-the-art three-dimensional Navier-Stokes solver was used to examine methods to improve the flow over a semi-span configuration. First, a parametric study is conducted to examine the influence of the stand-off height on the flow over the semi-span model. It is found that decreasing the stand-off height, below the maximum fuselage radius, improves the aerodynamic characteristics of the semi-span model. Next, active sidewall boundary layer control techniques are examined. Juncture region blowing jets, upstream tangential blowing, and sidewall suction are found to improve the flow over the aft portion of the semi-span model. Both upstream blowing and suction are found to reduce the sidewall boundary layer separation. The resulting near surface streamline patterns are improved, and found to be quite similar to the full-span results. Both techniques however adversely affect the pitching moment coefficient.

Pulnam, L. Elwood↗
NASA NTRS2014

Visualizing Flutter Mechanism as Traveling Wave Through Animation of Simulation Results for the Semi-Span Super-Sonic Transport Wind-Tunnel Model

It has long been recognized that frequency and phasing of structural modes in the presence of airflow play a fundamental role in the occurrence of flutter. Animation of simulation results for the long, slender Semi-Span Super-Sonic Transport (S4T) wind-tunnel model demonstrates that, for the case of mass-ballasted nacelles, the flutter mode can be described as a traveling wave propagating downstream. Such a characterization provides certain insights, such as (1) describing the means by which energy is transferred from the airflow to the structure, (2) identifying airspeed as an upper limit for speed of wave propagation, (3) providing an interpretation for a companion mode that coalesces in frequency with the flutter mode but becomes very well damped, (4) providing an explanation for bursts of response to uniform turbulence, and (5) providing an explanation for loss of low frequency (lead) phase margin with increases in dynamic pressure (at constant Mach number) for feedback systems that use sensors located upstream from active control surfaces. Results from simulation animation, simplified modeling, and wind-tunnel testing are presented for comparison. The simulation animation was generated using double time-integration in Simulink of vertical accelerometer signals distributed over wing and fuselage, along with time histories for actuated control surfaces. Crossing points for a zero-elevation reference plane were tracked along a network of lines connecting the accelerometer locations. Accelerometer signals were used in preference to modal displacement state variables in anticipation that the technique could be used to animate motion of the actual wind-tunnel model using data acquired during testing. Double integration of wind-tunnel accelerometer signals introduced severe drift even with removal of both position and rate biases such that the technique does not currently work. Using wind-tunnel data to drive a Kalman filter based upon fitting coefficients to analytical mode shapes might provide a better means to animate the wind tunnel data.

Christhilf, David M.↗
NASA NTRS2015

Does Simulated Spaceflight Modify Epigenetic Status During Bone Remodeling?

Little is known about the effects of spaceflight conditions on epigenetics. The term epigenetics describes changes to the genome that can affect expression of a gene without changes to the sequence of DNA. Epigenetic processes are thought to underlie cellular differentiation, where transcription of specific genes occurs in response to key stimuli, and may be heritable - passing from one cell to its daughter cell. We hypothesize that the mechanical environment during spaceflight, namely microgravity-induced weightlessness or exercise regulate gene expression in the osteoblast-lineage cells both to control bone formation by osteoblasts and bone resorption by osteoclasts, which continually shapes bone structure throughout life. Similarly we intend to evaluate how radiation regulates these same bone cell activity and differentiation related genes. We further hypothesize that the regulation in bone cell gene expression is at least partially controlled through epigenetic mechanisms of methylation or small non-coding RNA (microRNAs). We have acquired preliminary data suggesting that global genome methylation is modified in response to axial compression of the tibia - a model of exercise. We intend to pursue these hypotheses wherein we will evaluate changes in gene expression and, congruently, changes in epigenetic state in bones from mice subjected to the aforementioned conditions: hindlimb unloading to simulate weightlessness, axial compression of the tibia, or radiation exposure in order to gain insight into the role of epigenetics in spaceflight-induced bone loss.

radiation↗
NASA NTRS1993

Approximation methods for control of structural acoustics models with piezoceramic actuators

The active control of acoustic pressure in a 2-D cavity with a flexible boundary (a beam) is considered. Specifically, this control is implemented via piezoceramic patches on the beam which produces pure bending moments. The incorporation of the feedback control in this manner leads to a system with an unbounded input term. Approximation methods in this manner leads to a system with an unbounded input term. Approximation methods in this manner leads to a system with an unbounded input team. Approximation methods in the context of linear quadratic regulator (LQR) state space control formulation are discussed and numerical results demonstrating the effectiveness of this approach in computing feedback controls for noise reduction are presented.

Banks, H. T.↗
NASA NTRS2013

Goal-Function Tree Modeling for Systems Engineering and Fault Management

This paper describes a new representation that enables rigorous definition and decomposition of both nominal and off-nominal system goals and functions: the Goal-Function Tree (GFT). GFTs extend the concept and process of functional decomposition, utilizing state variables as a key mechanism to ensure physical and logical consistency and completeness of the decomposition of goals (requirements) and functions, and enabling full and complete traceabilitiy to the design. The GFT also provides for means to define and represent off-nominal goals and functions that are activated when the system's nominal goals are not met. The physical accuracy of the GFT, and its ability to represent both nominal and off-nominal goals enable the GFT to be used for various analyses of the system, including assessments of the completeness and traceability of system goals and functions, the coverage of fault management failure detections, and definition of system failure scenarios.

Johnson, Stephen B.↗
NASA NTRS1992

Accretion disks in active galactic nuclei - Vertically explicit models

A region of the parameter space accessible to accretion disks in AGN is explored using vertically integrated models to describe the thin-disk structure. Particular attention is paid to the role of convection. From a comparison of strongly convective solutions with varying mixing lengths to solutions obtained using a recent theory of convection developed for accretion disks, it is argued that it may be appropriate to take the mixing length to be roughly one-third of a pressure scale height when applying standard mixing-length theory to disks. Scalings are presented for various critical points in the locus of steady-state solutions, and rough estimates of time scales for behavior associated with disk instability are provided.

Cannizzo, John K.↗
NASA NTRS1994

Variability in Comet P/Swift-Tuttle

Spatial profiles of the coma of Comet P/Swift-Tuttle perpendicular to the projected Sun-comet line were obtained for the emission bands of CN, C2, and C3 as well as for two continuum bands from spectrophotometric observations taken from Oct. 5 to 8, 1992. The intensities were converted into emissivities per sq km in the cases of the continua and into column densities for the emission band profiles. Spatial and temporal variabilities have been found in all five investigated components, which are consistent with the rotational period of the nucleus determined from the observations of the comet during its last perihelion passage in 1862. The emission band profiles were fitted with the vectorial model and the production rates of CN, C2, and C3 were determined. One half of the profiles was fitted adequately under steady state conditions for the production rate in a first approximation, whereas the other half showed prominent bumps, which could only be explained by introducing a time-dependent production rate. Further investigations showed evidence for the presence of gaseous as well as dust jets in the coma, which indicated the presence of at least two active areas on the surface of the nucleus. The projected radial expansion velocities of two different features were determined to be (430 +/- 100) and (460 +/- 100) m/sec, respectively.

Schulz, Rita↗
NASA NTRS1996

Comparison of Predicted Low Speed Fan Rotor/Stator Interaction Modes to Measured

The V072 Rotor Wake/Stator Interaction Code is widely used as a state-of-the-art prediction code. This paper validates the code by comparing experimentally measured mode levels to those predicted by V072. The experimental mode levels were measured by the Rotating Rake system installed on the 48 inch Active Noise Control Fan at NASA Lewis Research Center. V072 predicted mode levels by inputting the actual wake profiles of the ANCF rotor measured by a 2-component hotwire. The mode levels were also predicted from the V072 wake models. V072 reasonably predicts the mode levels within the design limits of the code.

Sutliff, Daniel L.↗
NASA NTRS2006

AST Critical Propulsion and Noise Reduction Technologies for Future Commercial Subsonic Engines Area of Interest 1.0: Reliable and Affordable Control Systems

The General Electric Reliable and Affordable Controls effort under the NASA Advanced Subsonic Technology (AST) Program has designed, fabricated, and tested advanced controls hardware and software to reduce emissions and improve engine safety and reliability. The original effort consisted of four elements: 1) a Hydraulic Multiplexer; 2) Active Combustor Control; 3) a Variable Displacement Vane Pump (VDVP); and 4) Intelligent Engine Control. The VDVP and Intelligent Engine Control elements were cancelled due to funding constraints and are reported here only to the state they progressed. The Hydraulic Multiplexing element developed and tested a prototype which improves reliability by combining the functionality of up to 16 solenoids and servo-valves into one component with a single electrically powered force motor. The Active Combustor Control element developed intelligent staging and control strategies for low emission combustors. This included development and tests of a Controlled Pressure Fuel Nozzle for fuel sequencing, a Fuel Multiplexer for individual fuel cup metering, and model-based control logic. Both the Hydraulic Multiplexer and Controlled Pressure Fuel Nozzle system were cleared for engine test. The Fuel Multiplexer was cleared for combustor rig test which must be followed by an engine test to achieve full maturation.

Myers, William↗
NASA NTRS1983

Stratospheric sudden coolings and the role of nonlinear wave interactions in preconditioning the circumpolar flow

The mechanisms responsible for the transition of the circumpolar flow from its normal midwinter state to the preconditioned state that should evolve before a wavenumber-2 major warming are investigated, through a combination of observational, numerical and theoretical studies. Observations of Eliassen-Palm flux cross sections indicate that while wave zonal mean flow interaction theory could account for the qualitative evolution of the circumpolar flow during the warming, substantial nonlinear wave interactions were active during the cooling period, and these interactions significantly influenced the evolution of the circumpolar flow. Numerical experiments employing a truncated, semispectral model indicate that this cooling phenomenon is realistically reproducible in an idealized integration in which wave-wave interactions are present. Two different mechanisms are proposed to account for these nonlinearities.

Palmer, T. N.↗
NASA NTRS2002

Tracking Avian Reservoirs of Arboviruses using Remote Sensing and Radiotelemetry

Encephalitis is caused by a virus that is transmitted by mosquitoes between mammalian hosts. The virus is closely related to the West Nile virus (WNV), which started in New York in 1999, and has since spread to 25 states. Like encephalitis, WNV is vectored by mosquitoes, and the primary hosts are birds; humans are accidental, or'dead-end' hosts. Very little is understood about the behavior of these bird populations, and how they intersect - both in time and in space - with mosquito populations. Exploring these relationships is the first step in developing models for encephalitis and WNV transmission risk. This project combines remotely sensed data with radiotelemetry to create a spatiotemporal map of encephalitis viral activity in bird and mosquito populations in the Sacramento Valley of California. Specifically, remote sensing (RS) and geographic information system (GIS) technologies were used to characterize habitats utilized by both avian viral reservoirs and the mosquitoes that vector encephalitis. Radiotelemetry and serosurveys (blood) were then used to spatially and temporally track the patterns of infection. The project uses Landsat ETM+ multitemporal satellite data to characterize habitats utilized by both birds and the mosquito vectors. Mist nets were used to sample members of individual flocks of blackbirds and cowbirds over a period of several months; these birds were then bled to assess their viral status, banded, and fitted with transmitters. Radiotelemetry was used to spatially and temporally track the distribution of banded birds and their associated flocks. The movement of these indicator flocks were compared with the location of remotely sensed (adult and larval) mosquito habitats to determine the intersection of bird's and vectors; this is key in understanding where and when transmission occurs from bird to bird, as well as from bird to mammal, via mosquito. The relationships found during the project are being used to generate a model of encephalitis transmission risk in California.

Beck, L.↗
NASA NTRS2009

Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

Federal Aviation Administration (FAA)↗
NASA NTRSDate not supplied

NASA DEVELOP’s Approach to Co-Production and Collaborative STEM Engagement

The NASA DEVELOP Program conducts 50-60 projects each year with the goal of bringing the benefits of NASA Earth science to local decision-making challenges. DEVELOP, part of NASA’s Applied Sciences’ Capacity Building Program, connects end users with students, recent graduates, and early and transitioning career professionals through 10-week rapid feasibility studies. These projects are a collaboration between NASA, DEVELOP office host locations (universities and other federal installations), project partners (federal agencies, state and local governments, non-profit and for-profit organizations, and international organizations), and the project teams who conduct them. The projects take place under the guidance of science advisors from NASA, academia, and partner organizations, and introduces communities to new applications of NASA Earth observations data with the desired outcome of informed decision-making. This presentation will highlight the DEVELOP model of co-production and programmatic collaboration, lessons learned in partnering, and evaluation activities that look at the impact of the program’s efforts.

Capacity Building↗
NASA NTRSDate not supplied

NASA Airborne Observations in Support of Wildfire Science and Applications

The NASA Science Mission Directorate Earth Science Division Airborne Science Program enables access to modified aircraft in support of NASA projects. The Program supports researchers and engineers by enabling testing of new instruments, calibration of on-orbit satellite instruments with airborne sensors, and to support process studies and model development. This talk will provide an overview of the Program capabilities, review past NASA flight projects that have focused on wildfires, and discuss how the Program is poised to support the FireSense project and interagency efforts to incorporate new technologies and observations into the wildfire management community. Past missions including the Western States Fire Mission and FIREX-AQ will be discussed, an overview of relevant NASA sensors will be provided, and an introduction to upcoming flight activity will be presented. Data telemetry, communications, and data standards will also be discussed towards improving timely distribution of data products to land managers.

Matthew M Fladeland↗
NASA NTRS2024

Components Refurbishment and Chemical Analysis Facility, Hot Spot 1 Solid Waste Management Unit #041 Year 4 Annual Performance Monitoring Report Kennedy Space Center, Florida

This Year 4 Annual Performance Monitoring Report (PMR) presents the operations, maintenance, and monitoring activities for the Hydraulic Containment System (HCS) Interim Measure (IM) at the Components Refurbishment and Chemical Analysis (CRCA) facility located at John F. Kennedy Space Center (KSC), Florida. The primary objective of the HCS is to attain hydraulic control of the dissolved-phase chlorinated volatile organic compound (CVOC) plume, with the secondary objective to reduce concentrations of CVOCs in the high-concentration plume to support transition to monitored natural attenuation (MNA). CRCA has been designated Solid Waste Management Unit 041 under the KSC Resource Conservation and Recovery Act Corrective Action Program. The timeframe for activities documented in this Year 4 PMR extends from November 2022 through September 2023. Baseline sampling activities were completed in June 2019, and full-scale startup of the HCS IM was completed in July-August 2019. The operational runtime of the HCS for the Year 4 reporting period was approximately 94%, with the majority of downtime attributed to associated groundwater sampling events, maintenance, and Hurricane Nicole. Almost five million gallons of groundwater were treated during Year 4 of HCS operations, and concentrations of the site’s contaminants of concern (trans-1,2-dichloroethene and vinyl chloride) have been reduced by over 99%. This PMR describes the activities that were performed during Year 4 to operate and monitor the HCS IM, which includes three extraction wells, seven injection wells, and conveyance piping to a modular structure containing the control panel and an air stripper. Influent and effluent sampling results from the air stripper show that the system is operating as designed and is reducing concentrations of contaminants of concern to below detection limits. In addition to HCS operation, this PMR also discusses performance monitoring that has been implemented to assess progress of the HCS IM and overall plume conditions through scheduled groundwater (quarterly and semi-annual) and sub-slab soil gas (quarterly) sampling and analysis. Two ambient air samples were also collected on a quarterly basis in the vicinity of the modular structure and the paved driveway east of the Solvent Reclamation Area during routine operation and maintenance (O&M) activities to ensure safe breathing zone air quality for on-site personnel. All sub-slab soil gas and ambient air sampling conducted during the Year 4 operational period showed results below applicable regulatory air screening limits. Predictions made during the Year 2 groundwater model updates were in close correlation to post Year 4 plume conditions. A supplemental DPT study conducted in 2022 and 2023. This study indicated that low-concentration plume conditions, where concentrations exceed State of Florida Groundwater Cleanup Target Levels, expanded westward to Kennedy Parkway North and northward to the vicinity of the railroad tracks. Based on these results, recommendations were made to install 14 wells to monitor the downgradient and boundary conditions of the expanded LCP. The contents of this Year 4 PMR were presented during the November 2023 KSC Remediation Team meeting, where Team consensus was reached on several items including continued O&M of the HCS, and continued monitoring of groundwater, ambient air, and sub-slab soil gas. Sampling for per- and polyfluoroalkyl substances at CRCA is ongoing and will be submitted under separate cover.

K. Alex Murphy↗