Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active lattices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ultrafast X-Ray Scattering Reveals Composite Amplitude Collective Mode in the Weyl Charge Density Wave Material ( TaSe 4 ) 2 I

Here we report ultrafast x-ray scattering experiments of the quasi-1D charge density wave (CDW) material (TaSe 4 ) 2⁢ I following ultrafast infrared photoexcitation. From the time-dependent diffraction signal at the CDW sidebands we identify a 0.11 THz amplitude mode derived primarily from a transverse acoustic mode of the high-symmetry structure. From our measurements we determine that this mode interacts with the valence charge indirectly through another collective mode, and that the CDW system in (TaSe 4 ) 2 ⁢I has a composite nature supporting multiple dynamically active structural degrees of freedom.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phosphorus diffusion and deactivation during SiGe oxidation

Dopant profiles near the semiconductor–oxide interface are critical for microelectronic device performance. As the incorporation of Si 1−x Ge x into transistors continues to increase, it is necessary to understand the behavior of dopants in Si 1−x Ge x . In this paper, the diffusion and electrical activation of phosphorus within a strained, single-crystal Si 0.7 Ge 0.3 layer on Si during oxidation are reported. Both layers were uniformly doped, in situ, with an average phosphorus concentration of 4 × 10 19 atoms/cm 3 . After high-temperature oxidation, secondary ion mass spectrometry measurements revealed that the bulk of the phosphorus diffuses out of only the SiGe layer and segregates at the oxidizing SiGe–SiO 2 interface. Hall effect measurements corroborate the observed phosphorus loss and show that the phosphorus diffusing to the oxidizing interface is electrically inactive. Through density functional theory (DFT) calculations, it is shown that phosphorus interstitials prefer sites near the SiGe–SiO 2 interface. Finally, based on a combination of experimental data and DFT calculations, we propose that the phosphorus atoms are displaced from their lattice sites by Ge interstitials that are generated during SiGe oxidation. The phosphorus atoms then migrate toward the SiGe–SiO 2 interface through a novel mechanism of hopping between Ge sites as P–Ge split interstitials. Once they reach the interface, they are electrically inactive, potentially in the form of interstitial clusters or as part of the reconstructed interface or oxide.

Thornton, Chappel S.↗
DOE OSTI2025

Ultrafast Photoflash Synthesis of High-Entropy Oxide Nanoparticles

High-entropy metal oxides (HEOs) have recently received growing attention for broad energy conversion and storage applications due to their tunable properties. HEOs typically involve the combination of multiple metal cations in a single oxide lattice, thus bringing distinctive structures, controllable elemental composition, and tunable functional properties. Many synthesis methods for HEOs have been reported, such as solid-state reactions and carbon thermal shock methods. These methods frequently are energy-intensive or require relatively expensive heating equipment. In this work, we report an ultrafast photoflash synthesis method for HEO nanoparticles on diverse substrates. The energy input is provided by a commercial Xe photoflash unit, which triggers exothermic reactions to convert metal salt precursors to HEO nanoparticles within tens of milliseconds. The formation of HEO nanoparticles is attributed to the ultrafast heating (∼106 K/s) and cooling (∼105 K/s) rates of the photoflash and overall high temperature (>1000 K) during the ultrafast synthesis process. When the synthesized CoNiFeCrMn oxide (HEO) is tested as an oxygen evolution reaction electrocatalyst, it shows similar activity to similar materials prepared by other methods. We believe this photoflash synthesis provides a simple method for many others to synthesize diverse HEOs and explore their properties and potential applications.

exothermic reaction synthesis↗
DOE OSTI2024

A Data-driven approach to Core Power distribution reconstruction in a Nuclear Reactor

This report presents the initial development of a data-driven approach for reconstructing the core power distribution in a nuclear reactor (power shape synthesis) using ex-core sensors. Traditional techniques rely on deploying a large number of detectors throughout the reactor core. However, this approach is not feasible for innovative reactor concepts like Advanced Reactors and Microreactors. First, the tight lattice pitch, designed to maximize power density, limits the space available for sensors. Secondly, the harsh operating conditions are not compatible with commercially available detectors. The method proposed in this work integrates high-fidelity modeling with data-driven techniques to accurately reconstruct power distribution across various reactor types, thereby reducing the reliance on in-core sensors. Purdue University Reactor One (PUR-1) was selected as the test case. The CAD model representing the latest configuration of the PUR-1 core was imported into the OpenMC simulation framework, and the model was built. Additionally, the previously developed MCNP6 model was updated. The two models were assessed against the data collected during an experimental campaign conducted in July 2024. Thirty gold foils were placed in three Irradiation Assemblies in PUR-1 core. Using the measured activity of the irradiated foils, the neutron flux at different core locations was estimated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Transforming an Ionic Conductor into an Electronic Conductor via Crystallization: In Situ Evolution of Transference Numbers and Structure in (La,Sr)(Ga,Fe)O 3–x Perovskite Thin Films

Mixed-conducting perovskites are workhorse electrochemically active materials, but typical high-temperature processing compromises their catalytic activity and chemo-mechanical integrity. Low-temperature pulsed laser deposition of amorphous films plus mild thermal annealing is an emerging route to form homogeneous mixed conductors with exceptional catalytic activity, but little is known about the evolution of the oxide-ion transport and transference numbers during crystallization. Here the coupled evolution of ionic and electronic transport behavior and structure in room-temperature-grown amorphous (La,Sr)(Ga,Fe)O 3-x films as they crystallize is explored. In situ ac-impedance spectroscopy with and without blocking electrodes, simultaneous capturing-synchrotron-grazing-incidence X-ray diffraction, dc polarization, transmission electron microscopy, and molecular dynamics simulations to evaluate isothermal and non-isothermal crystallization effects and the role of grain boundaries on transference numbers is combined. Ionic conductivity increases by ≈2 orders of magnitude during crystallization, with even larger increases in electronic conductivity. Consequently, as crystallinity increases, LSGF transitions from a predominantly ionic conductor to a predominantly electronic conductor. The roles of evolving lattice structural order, microstructure, and defect chemistry are examined. Grain boundaries appear relatively nonblocking electronically but significantly blocking ionically. The results demonstrate that ionic transference numbers can be tailored over a wide range by tuning crystallinity and microstructure without having to change the cation composition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhancing Chiroptoelectronic Activity in Chiral 2D Perovskites via Chiral–Achiral Cation Mixing

Rational design of chiral two-dimensional hybrid organic–inorganic perovskites is crucial to achieve chiroptoelecronic, spintronic, and ferroelectric applications. Here, in this study, an efficient way to manipulate the chiroptoelectronic activity of 2D lead iodide perovskites is reported by forming mixed chiral (R- or S-methylbenzylammonium (R-MBA + or S-MBA + )) and achiral (n-butylammonium (nBA + )) cations in the organic layer. The strongest and flipped circular dichroism signals are observed in (R/S-MBA 0.5 nBA 0.5 ) 2 PbI 4 films compared to (R/S-MBA) 2 PbI 4 . Moreover, the (R/S-MBA 0.5 nBA 0.5 ) 2 PbI 4 films exhibit pseudo-symmetric, unchanged circularly polarized photoluminescence peak as temperature increases. First-principles calculations reveal that mixed chiral–achiral cations enhance the asymmetric hydrogen-bonding interaction between the organic and inorganic layers, causing more structural distortion, thus, larger spin-polarized band-splitting than pure chiral cations. Temperature-dependent powder X-ray diffraction and pair distribution function structure studies show the compressed intralayer lattice with enlarged interlayer spacing and increased local ordering. Overall, this work demonstrates a new method to tune chiral and chiroptoelectronic properties and reveals their atomic scale structural origins.

2D perovskites↗
DOE OSTI2022

Pressure-induced creation and annihilation of Weyl points in T d - Mo 0.5 W 0.5 Te 2 and 1 T " - Mo 0.5 W 0.5 Te 2

By means of first-principles density-functional theory calculations, we investigate the role of hydrostatic pressure in the electronic structure of the T d (Pmn2 1 ) and 1T" (Pm) phases of the Weyl semimetal Mo 0.5 W 0.5 Te 2 , which is a promising material for phase-change memory technology and superconductivity. We particularly focus on changes occurring in the distribution of the gapless Weyl points (WPs) within the 0 to 45 GPa pressure range. Here we further investigate the structural phase transition and lattice dynamics of the T d and 1T" phases within the aforementioned pressure range. Our calculations suggest that both the T d and 1T" phases of Mo 0.5 W 0.5 Te 2 host four WPs in their full Brillouin zone at zero pressure. The total number of WPs increases to 44 (36) with increasing pressure via pair creation up to 20 (15) GPa for the T d (1T") phase, and beyond this pressure pair annihilation of WPs starts occurring, leaving only 16 WPs at 45 GPa in both phases. The enthalpy versus pressure data reveal that the 1T" phase is more favorable below the critical pressure of 7.5 GPa; however, beyond this critical pressure the T d phase becomes enthalpically favorable. We also provide the calculated x-ray diffraction spectra along with the calculated Raman- and infrared-active phonon frequencies to facilitate the experimental identification of the studied phases

36 MATERIALS SCIENCE↗
DOE OSTI2024

Viral afterlife: SARS-CoV-2 as a reservoir of immunomimetic peptides that reassemble into proinflammatory supramolecular complexes

It is unclear how severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection leads to the strong but ineffective inflammatory response that characterizes severe Coronavirus disease 2019 (COVID-19), with amplified immune activation in diverse cell types, including cells without angiotensin-converting enzyme 2 receptors necessary for infection. Proteolytic degradation of SARS-CoV-2 virions is a milestone in host viral clearance, but the impact of remnant viral peptide fragments from high viral loads is not known. Here, we examine the inflammatory capacity of fragmented viral components from the perspective of supramolecular self-organization in the infected host environment. Interestingly, a machine learning analysis to SARS-CoV-2 proteome reveals sequence motifs that mimic host antimicrobial peptides (xenoAMPs), especially highly cationic human cathelicidin LL-37 capable of augmenting inflammation. Such xenoAMPs are strongly enriched in SARS-CoV-2 relative to low-pathogenicity coronaviruses. Moreover, xenoAMPs from SARS-CoV-2 but not low-pathogenicity homologs assemble double-stranded RNA (dsRNA) into nanocrystalline complexes with lattice constants commensurate with the steric size of Toll-like receptor (TLR)-3 and therefore capable of multivalent binding. Such complexes amplify cytokine secretion in diverse uninfected cell types in culture (epithelial cells, endothelial cells, keratinocytes, monocytes, and macrophages), similar to cathelicidin’s role in rheumatoid arthritis and lupus. The induced transcriptome matches well with the global gene expression pattern in COVID-19, despite using <0.3% of the viral proteome. Delivery of these complexes to uninfected mice boosts plasma interleukin-6 and CXCL1 levels as observed in COVID-19 patients.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Unveiling real‐time crystallization with nucleators and thickeners for zinc nitrate hexahydrate as a phase change material

Abstract The primary challenge of salt hydrates as phase change materials (PCMs) is their high degree of supercooling (∆ T Sup ). Past studies have attempted to alleviate ∆ T Sup by incorporating nucleators possessing similar lattice structure, without a thorough analysis of the nucleator/PCM interactions. This work presents a novel in‐operando study to visually observe the crystallization process of zinc nitrate hexahydrate (ZNH) in real‐time using suitable nucleators and a thickener. We have introduced a new dataset where zinc acetate dihydrate (ZnAc.2H) has been employed as an additive to ZNH for thermal energy storage (TES). According to our in‐operando study, ZnAc.2H underwent hydrolysis in molten ZNH to precipitate needle‐like ZnO particles, which acted as nucleators for the PCM. In the absence of a thickener, the crystal propagation of ZNH exhibited a preferential directional tendency, whereas incorporation of thickener made the phase change process uniform along all directions. Self‐hydrolysis of ZnAc.2H generated excess water which caused the undesirable effect of broadening the endothermic peak. The addition of carboxymethyl cellulose (CMC) thickener could restrict the activity of excess water and reduce the broadening of the endothermic peak. Differential scanning calorimetry (DSC) revealed that 5 wt% ZnAc.2H additive and 2 wt% CMC thickener added to ZNH can considerably improve the TES properties of ZNH PCM (∆ H Fusion 125.9 J·g −1 , ∆ T Sup 3.0°C, melting point [M.P.] 29.0°C). Our in‐operando studies can unveil real‐time phase change behaviors to better design PCM systems with desired characteristics.

Chakraborty, Anirban↗
DOE OSTI2024

Toward Accelerating Discovery via Physics-Driven and Interactive Multifidelity Bayesian Optimization

Both computational and experimental material discovery bring forth the challenge of exploring multidimensional and often nondifferentiable parameter spaces, such as phase diagrams of Hamiltonians with multiple interactions, composition spaces of combinatorial libraries, processing spaces, and molecular embedding spaces. Often these systems are expensive or time consuming to evaluate a single instance, and hence classical approaches based on exhaustive grid or random search are too data intensive. This resulted in strong interest toward active learning methods such as Bayesian optimization (BO) where the adaptive exploration occurs based on human learning (discovery) objective. However, classical BO is based on a predefined optimization target, and policies balancing exploration and exploitation are purely data driven. In practical settings, the domain expert can pose prior knowledge of the system in the form of partially known physics laws and exploration policies often vary during the experiment. Here, we propose an interactive workflow building on multifidelity BO (MFBO), starting with classical (data-driven) MFBO, then expand to a proposed structured (physics-driven) structured MFBO (sMFBO), and finally extend it to allow human-in-the-loop interactive interactive MFBO (iMFBO) workflows for adaptive and domain expert aligned exploration. These approaches are demonstrated over highly nonsmooth multifidelity simulation data generated from an Ising model, considering spin–spin interaction as parameter space, lattice sizes as fidelity spaces, and the objective as maximizing heat capacity. Detailed analysis and comparison show the impact of physics knowledge injection and real-time human decisions for improved exploration with increased alignment to ground truth. Here, the associated notebooks allow to reproduce the reported analyses and apply them to other systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Development and application of a uranium mononitride (UN) potential: Thermomechanical properties and Xe diffusion

We report that atomic-scale modeling of thermophysical and defect properties of uranium mononitride (UN) plays an important role in establishing a better understanding and improved models of UN fuel performance. Having an accurate interatomic potential is crucial for generating reliable data at finite temperatures using molecular dynamic simulations. We report a new interatomic potential for UN, based on a combination of many-body and pairwise interactions, a simple form that we later show could be easily adapted to include Xe-U and Xe-N interactions, i.e., generating a U-N-Xe interatomic potential. The potential was fitted to experimental thermal expansion and single crystal elastic constants, as well as Frenkel, Schottky, anti-Schottky, and antisite pair reaction energies from density functional theory (DFT) calculations. Using the potential, we successfully reproduced experimental lattice parameters, thermal expansion, single crystal elastic constants, and temperature dependent heat capacity. The potential also performs reasonably well in reproducing the energy of the aforementioned stoichiometric defect reactions and defect migration barriers calculated using DFT. However, the potential underestimates the energy difference between the tetrahedral and dumbbell uranium interstitials, and a more complex potential form might be needed to overcome this issue. The potential was also used to predict UN single crystal elastic constants and elastic properties at different temperatures, showing that UN becomes softer and more compressible with increasing temperature. We also compare our potential against literature data from previous empirical potentials, demonstrating similar or better behavior depending on the property of interest. To enable the simulation of Xe in UN a Buckingham potential has been fitted to DFT-derived Xe incorporation energies. The potential was then used to determine the activation energy for Xe diffusion due to various Xe-containing defects, with {XeU : VU} exhibiting the lowest activation energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Statistical mechanical model for crack growth

Analytic relations that describe crack growth are vital for modeling experiments and building a theoretical understanding of fracture. Upon constructing an idealized model system for the crack and applying the principles of statistical thermodynamics, it is possible to formulate the rate of thermally activated crack growth as a function of load, but the result is analytically intractable. In this report an asymptotically correct theory is used to obtain analytic approximations of the crack growth rate from the fundamental theoretical formulation. These crack growth rate relations are compared to those that exist in the literature and are validated with respect to Monte Carlo calculations and experiments. The success of this approach is encouraging for future modeling endeavors that might consider more complicated fracture mechanisms, such as inhomogeneity or a reactive environment.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Accelerating the design of lattice structures using machine learning

Lattices remain an attractive class of structures due to their design versatility; however, rapidly designing lattice structures with tailored or optimal mechanical properties remains a significant challenge. With each added design variable, the design space quickly becomes intractable. To address this challenge, research efforts have sought to combine computational approaches with machine learning (ML)-based approaches to reduce the computational cost of the design process and accelerate mechanical design. While these efforts have made substantial progress, significant challenges remain in (1) building and interpreting the ML-based surrogate models and (2) iteratively and efficiently curating training datasets for optimization tasks. Here, we address the first challenge by combining ML-based surrogate modeling and Shapley additive explanation (SHAP) analysis to interpret the impact of each design variable. We find that our ML-based surrogate models achieve excellent prediction capabilities (R 2 > 0.95) and SHAP values aid in uncovering design variables influencing performance. We address the second challenge by utilizing active learning-based methods, such as Bayesian optimization, to explore the design space and report a 5 × reduction in simulations relative to grid-based search. Collectively, these results underscore the value of building intelligent design systems that leverage ML-based methods for uncovering key design variables and accelerating design.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Confinement Reconstruction Unlocks Stable Ru Single Atom-Doped IrO x Anodes for Long-Term High-Rate CO 2 Electrolysis

IrO 2 is a commonly employed anode catalyst for CO 2 electrolysis in membrane electrode assembly (MEA) systems. However, under high current densities, its structural reconstruction leads to activity loss and stability degradation, limiting the industrial viability of CO 2 electrolysis. In this work, we demonstrated a confinement reconstruction strategy to precisely regulate the structural evolution during electrolysis. Ethylene glycol serves as a structural modulator, protecting the catalyst surface, suppressing soluble species formation, and promoting ordered structural evolution. Single-atom Ru acts as a stability enhancer, forming robust Ir–O–Ru bridging structures that facilitate an ordered transformation from a 4-fold [RuO 4 ]/[IrO 4 ] to a 6-fold symmetry [RuO 6 ]/[IrO 6 ] octahedral framework, thereby enhancing structural rigidity and long-term stability. As a result, in MEA-based CO 2 electrolysis, the catalyst achieves a stable operation at 200 mA cm –2 for 480 h, maintaining a CO selectivity above 80%. Theoretical calculations further elucidate that the enhanced stability originates from the suppression of oxygen vacancy formation, making the lattice-oxygen-mediated mechanism (LOM) potentially less favorable. This work provides insights into the structural evolution of the OER catalysts under high-current-density conditions, paving the way for large-scale CO 2 electrolysis commercialization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Metalorganic chemical vapor deposition of ZnGeN 2 films on GaN: effects of cation stoichiometry on surface morphology and crystallinity

Novel optoelectronic device designs based on the heterostructures of III-N and II-IV-N 2 are promising to advance device performance significantly. For example, by utilizing InGaN-ZnGeN 2 quantum well (QW) structures instead of pure InGaN, the band structure engineering in the QW active region can lead to improved electron-hole wavefunction overlap, and thus enhance the radiative efficiency for photon generation. These novel heterostructures have great potential to address the current challenge of low quantum efficiency in InGaN QW based light emitting diodes emitting in green and beyond. The materials development of ZnGeN 2 is still at an early stage as compared to the much matured GaN material system. In an ideal octet rule preserving ordered structure of ZnGeN 2 , every N atom is coordinated by exactly two Zn and two Ge atoms. However, local violation of octet rule can be caused by non-ideal coordination of N by the cations. The disordered structure is thermodynamically less favorable but can still be achieved, for example, in kinetics-limited growth regime. The ordered ZnGeN 2 has a bandgap very close to that of GaN (~3.4 eV) and a lattice mismatch of <0.1% with GaN. Interestingly, the valence band of ZnGeN 2 has been predicted to be ~1 eV above that of GaN, which has inspired novel designs for high efficiency light emitters. In this work, we investigated the metalorganic chemical vapor deposition (MOCVD) of ZnGeN 2 films on GaN/c-sapphire templates. Diethylzinc (DEZn), germane (GeH4) and ammonia were used as the precursors for Zn, Ge and N, respectively. A systematic study was conducted to investigate the cation stoichiometry as a function of growth temperature (TG), total reactor pressure (P) and DEZn/GeH 4 molar flow rate ratio (RII/IV). Under the investigated growth window, the Zn/(Zn+Ge) composition in the films, determined from energy dispersive X-ray spectroscopy, decreased monotonically with increase in TG but increased with increase in P and RII/IV. Atom probe tomography data did not indicate the presence of any secondary phases such as Zn 3 N 2 or Ge 3 N 4 . The surface morphology and crystallinity of the grown films had strong correlation with the Zn/(Zn+Ge) composition. The scanning electron microscopy images showed that the near-stoichiometric films have planar surfaces whereas Zn-rich films had crystallites on their surface and the Zn-poor films had faceted surface. Scanning transmission electron microscopy (STEM) imaging revealed that the Zn-rich and Zn-poor films have columnar and filament-like morphology, respectively, whereas the near-stoichiometric films have continuous film-like cross-sectional morphology. TEM nano-diffraction patterns as well as X-ray diffraction 2θ-ω scan profiles indicate that the near stoichiometric films are single crystalline. Nano-diffraction pattern of the stoichiometric films resembled that of a disordered ZnGeN 2 structure. Room temperature Raman spectra of near-stoichiometric films showed only the phonon density of states like features of a cation disordered ZnGeN 2 . Cathodoluminescence and photoluminescence spectra measured at different temperatures had similar features with peak emission wavelength at ~ 2 eV. In conclusion, the stoichiometry of ZnGeN 2 films can be widely tuned by tuning the MOCVD growth parameters. The surface morphology and the crystallinity of the films were found to have strong correlation with the Zn/(Zn+Ge) composition. The stoichiometric ZnGeN 2 films grown on GaN were demonstrated with uniform surface morphology and high crystalline quality. The results from this work will provide pathway to implement ZnGeN 2 in device structures.

Karim, Md Rezaul↗
NASA NTRS2003

Photonic Interrogation and Control of Nano Processes

My research activities for the summer of 2003 consisted of two projects: One project was concerned with determining a method for predicting the static and dynamic assembly properties of nano-structures using laser tweezers. The other project was to investigate the generation of Laguerre-Gaussian modes using a spatial light modulator incorporated into an optical tweezers system. Concerning the first project, I initially pursued the approach suggested by my NASA colleague Dr. Art Decker. This approach involved mimicking the model of the structure of atomic nucleus for the assembly of 1 to 100 atoms using allowed quadruple transitions induced by orbital angular momentums of a Laguerre- Gaussian (Doughnut) laser mode. After realizing the inaptness of the nuclear model with the nanostructure model as far as the binding forces and transitions were concerned, I focused on using quantum dot modei. This model was not attuned also for the host lattice influences the electronic structure of the quantum dot. Thus one other option that I decided to pursue was the approach of molecular quantum mechanics. In this approach the nanostructure is treated as a large (10-100 nm) molecule constructed from single element or multi-elements. Subsequent to consultation with Dr. Fred Morales, a chemical engineer at NASA GRC, and Dr. David Ball, a computational chemist at Cleveland State University, I acquired a molecular-quantum computation software, Hyperchem 7.0. This software allows simulation of different molecular structures as far as their static and dynamic behaviors are concerned. The time that I spent on this project was about eight weeks. Once this suitable approach was identified, I realized the need to collaborate with a computational quantum chemist to pursue searching for stable nanostructures in the range of 10-100 nm that we can be assembled using laser tweezers. The second project was about generating laser tweezers that possess orbital angular momentum. As shown, we were able to generate laser tweezers modes of different orbital angular momentum using a spatial light modulator incorporated into a laser tweezers system. The motivation for investigating these types of modes stems from being able to spin particles at high speeds and also to orient two particles in separate traps and then join them together. Also, there has been recent intense interest on fundamental physics research on orbital angular momentum of light. The fact that circularly polarized light may have associated with it angular momentum that relates to the spin of individual photons (spin 0 for the plane polarized light, spin +1 for the right-circularly polarized light and spin -1 for the left-circularly polarized light) was first demonstrated by Beth in 1936. Orbital angular momentum is, however, distinct from spin in that the spin angular momentum of light is intrinsically linked to the behavior of the electric field in the light whereas orbital angular momentum is a consequence of inclined wavefronts. In 1992 L. Allen, et al showed that the Laguerre-Gaussian (LG) modes could possess well-defined orbital angular momentum that can exceed 1 planck's constant, i.e. l plancks constant per photon, where l is the azimuthal index of the mode.

Jassemnejad, Baha↗
DOE OSTI2025

Formation of U(VI) peroxide nanoclusters from cascade reactions with a persulfate radical initiator

Radiolysis of water in high radiation fields generates a variety of reactive oxygen species that influence the chemical behavior and complexation of hexavalent uranium. This study investigates the behavior of interaction of a uranyl cation (UO 2 2+ (VI)) with a series of free radicals that are formed in situ via activation of the free radical initiator persulphate (S 2 O 8 2− ), which releases both SO 4 ˙ − and ˙OH species in the solution. Electron Paramagnetic Resonance (EPR) and Raman spectroscopy were used to evaluate the presence of the hydroperoxyl radical (HO 2 ˙) and superoxide radicals (O 2 ˙ − ) that are formed within the solution through radical cascade reactions. In addition, a uranyl peroxide cluster solid (NaU 24 ) was crystallized and characterized using single crystal X-ray diffraction (SCXRD), vibrational spectroscopy, and EPR spectroscopy. The presence of the hydroperoxyl radical (HO 2 ˙) and superoxide radicals (O 2 ˙ − ) was also observed in the solid-state compound, but spectroscopic evidence suggests that it was associated with the Na + network and not the cluster itself. Density functional theory (DFT) calculations were also utilized to further confirm the radical species produced and determine the potential stabilization of radicals detected within the cluster and lattice.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗